Hoe do i avoid "click to activate and use this control" message?

how avoid th problem of getting the message below...when
there is a flash movie in my HTML file?
"click to activate and use this control"

Oh god .. here we go again .. Obviously someone has been
living under a rock
or on a deserted island for a few months :)
This is due to Microsoft IE changes required to avoid
infringing the
(stupid) EOLAS patent. It applies to all Active-X control
that can interact
with the user.
If you are viewing a web site, you cannot really do anything
to fix it,
except complain to the web master
Here is a link to find information on how to fix your website
to cope with
the Active-X active content changes:
http://www.justfuckinggoogleit.com?q=activecontent+IE+ActiveX+Change
Jeckyl
(If that does not redirect, just go to
http://activecontent.blogspot.com)

Similar Messages

Click To Activate and Use this control message in IE

I have this message popping up only on the IE "Click To Activate and Use this control message".
I googled it and there are a few solutions but somehow they did not really work for me.
Is really that complicated to get a fix on that message.
Does anyone have a good working solution?

Hi,
You may want to try any one of the following to know and get rid of the message you are talking about
http://www.kirupa.com/developer/flash8/flash_fix.htm
http://www.howtocreate.co.uk/noclicktoactivate.html
Thanks!
ps: please mark this post as Answered if this is of help to you

Click to activate and use this control

hi,
I have problem, when i run my .swf in browser i am getting
one message that " Click to activate and use this control"...is
there any solution to enable this message(alt tag)..

monuu wrote:
> i am really sorry...actually after i posted the message
i searched in this forums for the solution...after i saw them i
realised,...
>
> I am sorry
No need to be sorry. Will enroll you for two weeks as sex
slave and all will be
forgotten and forgiven.
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

HTML View - Click to activate and use this control

Hi, I have an HTML View in my VC App. When the HTML View is presented it has to be clicked on. There is also a tool tip that states "Click to activate and use this control". I didn't see any mention of this in the forums.
Is there any way to get rid of this?
Thanks,
Ken Murray

Hi Kenneth,
maybe you had this issue not before and then you have patched your windows system. This issue comes with a microsoft patch last year I think it was october or november.
Here on SDN is a how-to available which explains how you can remove this patch, but I think it's not recommend to remove security patches.
Best Regards,
Marcel

Re: click to activate and use this control

activecontent.blogspot.com

Not a Flash issue. Only a Windows IE issue:
http://www.adobe.com/devnet/activecontent/
Lon Hosford
www.lonhosford.com
May many happy bits flow your way!
"nolcon" <[email protected]> wrote in
message
news:e3ivu1$mq7$[email protected]..
Click to Activate and Use this Control... WOW... my
upgrade to
Studio 8 has been rendered anemic by the requirements of
"more security" by
Microsoft and others. Now Flash has an error message and you
have to click
the
little sucker to get it to work. Someone dropped the ball BIG
TIME on this
one. Surely there is a fix for this for a non-programmer such
as myself.
I
thought I was just stupid until I went on Taco Bell's
www.becomeelpresidente.com. I did the same thing there...
with different
browsers also.
HELP PLEASE!
Nolan Conley
[email protected]

How to get rid of "click to activate and use this control"

Hi,
Any idea how to get rid of "click to activate and use this control".
I don't want user to click to start working with the form.
We are using IE6, forms9i and 10g application server.
Thanks in advance.
Kumar

I got the solution...
Metalink - Note:357545.1
Kumar

How to prevent people asking how to prevent "click to activate and use this control"

When I visit the fourms, I keep seeing these questions about
how to disable
"click to activate and use this control". Its really annoying
and
disrupting my web experience. I do know this really this is a
blatant
attack on Adobe and Flash by Microsoft and is obviously
related to the Adobe
takeover of Macromedia, and probably also related to the fact
that it is now
impossible for anyone to install Flash Player (which Adobe is
ignoring
because their support is so useless since the takeover). Is
there something
I can do to prevent these questions being posted? I've
searched all the
forums and cannot find any information. Surely someone else
has had this
problem.
Jeckyl

Some people don't like to search...
Some people don't know what to search...
Some people don't even know there is a search...
Just ask them to search for "click to activate and use this
control".
Search
Flash Support Forums
Search
Google

"Click to activate and use this control" in IE

When using Flash forms, IE 7 surrounds them with a box and
prompts users to "click ot activate and use this control." Is this
the old Flash problem with using object or embed tags without
javascript to embed movies? Is there a way to fix how ColdFusion
embeds Flash forms so people don't have to click on them before
they can use them? Maybe it's fixed in CF 8?
I found the answer here:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=22&threadid=1141999&STA RTPAGE=2&FTVAR_FORUMVIEWTMP=Linear.
Not sure why this comes up in Google but I couldn't find it through
the Adobe site, this forum system really sucks i.e. slow searches
to the point of being useless.

What version of CF are you using? This was fixed with the CF
MX 7.02 patch

HTM says: "Click to activate and use this Control"?

When I open my published Captivate movie in Internet Explorer
(clicking on the htm file), my cursor becomes the shape of a hand,
and there is small a mouseover that says "Click to activate and use
this Control". I am using Flash 9. I must click 1x to activiate
something, then my Captivate buttons work just fine.
What is the control I'm activating? Can I turn off this
prompt in Security settings? This will drive end users bonkers.
I don't get this issue in Firefox.

Hi pcorad
This has been an issue since Microsoft was forced to alter
the way Internet Explorer handles content such as Flash. To work
past it, you can use JavaScript. (This is the reason for the
existence of the additional standard.js file we see in Captivate 2)
You might wish to search the forums for the phrase "click to
activate" and you should find many results that explain things in
more detail.
Cheers... Rick

Dreamweaver Site Publish_CLICK TO ACTIVATE AND USE THIS CONTROL ERROR WHEN PUBLISHING

Hi all, recently after publishing and testing my site I
noticed where my flash files are located boxes around the files
with a "CLICK TO ACTIVIATE AND USE THIS CONTROL" pop up thing
occur, when I hover over the flash parts. Can you please tell me
why this occurs and how to remove it? It works fine on safari but
using internet explorer, there seems to be a problem.
hope u can help

It's IE-only behaviour as a result of changes Microsoft made
earlier this
year to their browser, regarding how Active Content (Flash,
Quicktime etc)
is handled, after losing a high profile court case.
http://blog.deconcept.com/2005/12/15/internet-explorer-eolas-changes-and-the-flash-plugin/
Background:
http://en.wikipedia.org/wiki/Eolas
See also
http://www.adobe.com/devnet/activecontent/
If you're running Dreamweaver 8.0.2, the fix is already built
into DW's
interface.
If not, try
http://blog.deconcept.com/swfobject/
Regards
John Waller

Press SPACEBAR or ENTER to activate and usee this control

Hi,
Just started using Flash 8 and i seem to be getting a border
with the following message around any Flash content i use in the
site, message: 'Press SPACEBAR or ENTER to activate and use this
control'
I never had this with MX2004, any ideas anyone, pretty
annoying on an entire flash site.
Appreciate any help offered,
Pat

just search the forums - been the "hot topic" for a few weeks
- lengthy discussions been going on
everyday as we are all dealing with this (microsoft/Eolas
patent issue). Try searching google for
"active content" - tons of information in the form of
announcements, blogs, articles, etc...all over
the web.
As a developer there are various methods using js to activate
content automatically - if you are
just a web surfer you cant do anything.
hope this helps.
--> Adobe Certified Expert *ACE*
--> www.mudbubble.com
--> www.keyframer.com
patbegg wrote:
> Hi,
> Just started using Flash 8 and i seem to be getting a
border with the
> following message around any Flash content i use in the
site, message: 'Press
> SPACEBAR or ENTER to activate and use this control'
>
> I never had this with MX2004, any ideas anyone, pretty
annoying on an entire
> flash site.
>
> Appreciate any help offered,
>
> Pat
>

Mozila Firefox is always asking me to click to activate and use plug-ins like Adobe Reader, Flash, Youtube videos and other plug-ins which it never did before.

I am using Mozilla Firefox and it is now bugging me. After updating it, it is now asking me to always click to activate and use plug-ins like Adobe Reader, Flash, Youtube videosand other plug-ins. I click on activiate all plug-ins but it still asks me to do it each time that I try to use Flash, Adobe Reader, watch a You Tube Video or anything. Why won't Mozilla Firefox automatically actaivate the plug-ins like it used to do. I tried to follow directions on our website for fixing this but it did not work. I am running
Windows XP. Please let me know how to fix this. Thank you.

In the past, to protect you from [https://support.mozilla.org/kb/use-plugins-play-audio-video-games plugins] that have stability or security issues, Firefox could only turn off the problematic plugin. Now Firefox can prevent the plugin from running automatically (which prevents many issues) and then let you choose to run or update the plugin. See [[Why do I have to click to activate plugins?]] for more info.
If you'd like to Disable Firefox's Click-to-Play feature,
# Type ''about:config'' in the address bar and press Enter.
# Press the big button to bypass the warning.
# In the search box, paste ''plugins.click_to_play''
# In the search results, double-click ''plugins.click_to_play'' to set its value to '''false'''

How to activate and use Siri in ios 8

My iphone 5 does not turn on Siri. How do I find the information on 'how to activate and use Siri'?

You can activate Siri following this steps on your iPhone 5:
Settings > General > Siri
There you can activate Siri and chose the language you want her to interact with you

I would like to buy my boyfriend the iphone 5. He has an upgrade - but can I purchase it for Christmas now and get money back when he activates and uses his upgrade?

I would like to buy my boyfriend the iphone 5. He has an upgrade - but can I purchase it for Christmas now and get money back when he activates and uses his upgrade?

Or purchase an Apple Gift Card for him to use to get a phone at Apple after Christmas. He gets the card as the Christmas gift and can go get the phone himself. It would cost you the same amount of money.

I have connected my phone to find y iphone.however,the device isnt showing up on find my iphone which is a huge problem because i need to to be able to activate and use my phone.what can i do?

i have connected my phone to find y iphone.however,the device isnt showing up on find my iphone which is a huge problem because i need to to be able to activate and use my phone.what can i do?

Hi there pinkmartini87,
You may find the troubleshooting steps in the article below helpful.
iCloud: Troubleshooting Find My iPhone, iPad, iPod touch, or Mac
http://support.apple.com/kb/TS4006
-Griff W.

Hoe do i avoid "click to activate and use this control" message?

Similar Messages

Maybe you are looking for