Hoe to read attachments of type MESSAGE/RFC822
hi,
How to read attachments in mails of type MESSAGE/RFC822
this occurs when somebody puts "Forwarded mails" directly as an attachment inside the mail body itself..
guyz ur help for this will be very much helpful..
thanks
sriram.B
Hi,
I am also struggling the same problem. When I am reading part of type message/rfc822 I am not able to get right content.
Waiting for some reply.
Subhash
Similar Messages
-
Content-Type: message/rfc822?
So Mail on the iphone doesn't appear to be able to display inline the following content type
Content-Type: message/rfc822
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
Does anybody else know a way Mail can display the message as an attachment "inline?"Robert,
I have received messages forwarded from Thunderbird and had them show up.
There must be some difference. When you are constructing the message yourself, are you following all the guidelines in RFC 1049, 1341, and 1521-1524? I think there might be other involved. Essentially as I understand it, and its been a while since I read the RFC's in full, that the message/rfc822 was to indicate an attachment, or portion that complied with the older rfc822 for backwards compatibility.
Hope this helps,
Nathan C. -
Handling of base64 encoded body for message/rfc822
As I understand the mime spec allows only "7bit", "8bit", or "binary" for the body of a "message/rfc822" entity
However, it looks like Outlook is generating these under some circumstances (I have supplied a sample below). When attempting to read these via the JavaMail API the message content is empty and instead ends up in the header fields.
Is there a workaround or setting to handle these base64 RFC822 attachments in JavaMail?
Here's a stripped down sample of the message with the RFC822 attachment that I'm trying to handle:
MIME-Version: 1.0
X-Mailer: Microsoft Office Outlook 12.0
Content-Type: multipart/mixed; boundary=00235400e66249e8d9047d9b2ab3
--00235400e66249e8d9047d9b2ab3
Content-Type: multipart/alternative;
boundary=00235400e66249e8cf047d9b2ab1
--00235400e66249e8cf047d9b2ab1
Content-Type: text/plain;
charset=iso-8859-1
Content-Transfer-Encoding: 8bit
... [plain text version of message]
--00235400e66249e8cf047d9b2ab1
Content-Type: text/html;
charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
... [html version of message]
--00235400e66249e8cf047d9b2ab1--
--00235400e66249e8d9047d9b2ab3
Content-Disposition: attachment
Content-Type: message/rfc822
Content-Transfer-Encoding: base64
UmVjZW...
--00235400e66249e8d9047d9b2ab3--Thanks for the info and suggested workaround. Would be neat to have a configurable option in 1.4.4 since info on the web suggests there are other email systems generating this rubbish.
The customer who generated the emails is using Outlook 2007 with the Google Apps Sync for Outlook. I haven't been able to replicate in Outlook 2007 so might be related to the connector. I'll do some more testing before reporting the problem to the appropriate organization! -
How to inline message/rfc822 attachments?
Howdy,
In Tiger, attachments with a MIME type of "message/rfc822" were shown inline.
In leopard they are not.
Now they show up as an attachment with an envelope icon and a filename of "somefilename.eml" where "somefilename" appears to be based off the subject, but is likely set by the sender's mail client.
How do I get the Tiger behavior back?
Thanks,
Jeff.This is not unusual. An attached message need not have a filename,
especially if it wasn't stored in a file but rather was just attached to the
new message from within the mailer that composed the new message.
Some mailers will set a filename anyway, but there's no requirement
that they do that. -
HT2443 loops are in the browser when you the loop message reads this file type is not supported
loops are in the browser when you the loop message reads this file type is not supported
gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR -
The message section of my Mail is very tiny to read as I type my messages. How do I enlarge the viewing size of my window?
I am referring to outgoing new messages that I am typing.Can you drag the bottom right corner? You can in Snow Leopard, and I imagine you can in Lion.
-
"Read composite data instead" message appears if I type something outside of Photoshop
Good morning
Sometimes during opening of a big batch of files "read composite data instead" message appears. My files are okay, not corrupted. I click Cancel and work with layered files without problem.
What I noticed is the message appears if I type something outside of photoshop (in this forum for example), press alt+shift...
Just curious how typing can affect the error message and how to fix it?
I use Photoshop CS6
Thanks!I encountered this problem in PS3 on my Mac, OSX 10.5.8
I had tried opening the file from several image viewing programs, with no improvement.
Finally found this open source software...
Download the program:
PHOTOSHOP FILE (PSD) EXTRACT/RECOVER TOOL
Follow their directions. You will have to extract each layer individually and reassemble the file, which is a bummer. I lost two layers out of 20, but they were easy to fix - Better than recreating the file from scratch!
Good Luck -
How to read the multipart/realted mime type message.
hello, sir
please tell me,
how to read the multipart/realted message.
which are the subpart are included in the "multipart/related" message
i know only "multipart/mixed" and i know how to read ,it contain the subpart ,
1)text / plain
2)text / html
3)multipart/alternative
a)text / plain
but i don't know which are the subpart included in the "multipart/related " please tell me.
thanksToday we rely on Simulink to perform parameterization of your designs in two ways:
Parameterizable Subsystems and Blocks : Parameters themselves can be MATLAB expressions that need to be evaluated for which we need the MATLAB interpreter
The very useful Rate and Type propagation or Simulink compilation that allows us to specify types & rates in one location that gets systematically propagated to all.
To truly make the HDL Netlist that is generated from SysGen parameterizable, we would have to implement some of this capability in the HDL netlist itself by:
Using Generics(VHDL) or Parameters(Verilog) - We would have to capture the bit width(type) propagation through levels of hierarchies and finally parameterize the IP itself based on this value
Since IP itself does not have this capability through generics, we would have to package a separate tcl script that updates the IP parameterization appropriately in response to top level parameters(or GUI parameters)
Interpreting MATLAB expressions and translating them into VHDL/Verilog expressions (alternatively tcl expressions of IP). In simulink, mask parameters can be passed from one level to the next. Also parameterization of a block can be composed of Matlab expressions using variables from ancestor masks & the MATLAB interpreter – so we will need to somehow capture that as well.
-
Attachments deleted during message mapping in PI 7.1
We have upgraded our SAP XI 3.0 SP 22 system to SAP PI 7.1 SP06. In XI 3.0 we created some message mappings that mapped an XML payload with attachments to another message type. The attachments would still exist after the mapping step. In SAP PI 7.1 we now see that attachements are deleted from the message. We cannot see why this is happening. We have tried to set the 3 new option in the operation mappings without any results. The attachements are still being deleted.
Active Options in operation mappings:
Use SAPXMLToolkit = true
Do Not Resolve XOP includes = false
Read Attachements = false
In the SXMB_MONI we can see that the attachements are deleted after the Request Message Mapping step. It is a simple proxy-to-proxy scenario with interface and message mapping.
<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping already defined in interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 46842937562139BCA3F2AC1F36E729FE</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 5D945F00B00611DDB04FF8CF0A5B0156</Trace>
<Trace level="1" type="T">Interface Mapping urn:kadaster-nl:SERV:ZA:KAD:DOVO im_mail_to_dms</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_mm_mail_to_dms_</Trace>
<Trace level="3" type="T">MTOM Attachments are Transferred to the Payload</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_mm_mail_to_dms_.class (urn:kadaster-nl:SERV:ZA:KAD:DOVO, -1) in swcv 5d945f00-b006-11dd-b04f-f8cf0a5b0156.</Trace>
<Trace level="2" type="T">Loaded class com.sap.xi.tf._mm_mail_to_dms_</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_mm_mail_to_dms_$MT$InnerLibsList.class (urn:kadaster-nl:SERV:ZA:KAD:DOVO, -1) in swcv 5d945f00-b006-11dd-b04f-f8cf0a5b0156.</Trace>
<Trace level="2" type="T">Loaded class com.sap.xi.tf._mm_mail_to_dms_$MT$InnerLibsList</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_mm_mail_to_dms_$MT$InnerParamsList.class (urn:kadaster-nl:SERV:ZA:KAD:DOVO, -1) in swcv 5d945f00-b006-11dd-b04f-f8cf0a5b0156.</Trace>
<Trace level="2" type="T">Loaded class com.sap.xi.tf._mm_mail_to_dms_$MT$InnerParamsList</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._mm_mail_to_dms_</Trace>
<Trace level="1" type="T">*** START APPLICATION TRACE ***</Trace>
<Trace level="3" type="T">Document start</Trace>
<Trace level="3" type="T">Start tag [ns1:OpvoerenDocumentRequest]</Trace>
<Trace level="3" type="T">Add raw attribute [ xmlns:ns1="urn:kadaster-nl:SERVICES:DMS:Opvoeren:ZI_KAD_DMS_MAIN"]</Trace>
<Trace level="3" type="T">Start tag [DocumentInfoRecord]</Trace>
<Trace level="3" type="T">Start tag [Type]</Trace>
<Trace level="3" type="T">Put value [302]</Trace>
<Trace level="3" type="T">Close tag [Type]</Trace>
<Trace level="3" type="T">Start tag [Omschrijving]</Trace>
<Trace level="3" type="T">Put value [Apeldoorn]</Trace>
<Trace level="3" type="T">Close tag [Omschrijving]</Trace>
<Trace level="3" type="T">Close tag [DocumentInfoRecord]</Trace>
<Trace level="3" type="T">Close tag [ns1:OpvoerenDocumentRequest]</Trace>
<Trace level="3" type="T">Document end</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_mm_mail_to_dms_ completed. (executeStep() of com.sap.xi.tf._mm_mail_to_dms_).</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="3" type="T">Attached will be Deleted cid:payload-001708D1A20E1DEDAD96471B4CCBC447(@)sap.com</Trace>
<Trace level="3" type="T">Attached will be Deleted cid:payload-001708D1A20E1DEDAD96471B4C758447(@)sap.com</Trace>
<Trace level="1" type="T">ContentType application/xml</Trace>
Regards,
JeroenHi Michal,
Already tried this option too. However this option would only transfer the attachments to
the mapping runtime in JAVA. We only map the actual payload in a graphical message
mapping, so for our purpose, the other attachments could stay untouched and remain
in the abap part for further pipeline processing.
You can find the result of the Read attachment option during runtime here:
<!-- ************************************
-->
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping already defined in interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 46842937562139BCA3F2AC1F36E729FE</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 5D945F00B00611DDB04FF8CF0A5B0156</Trace>
<Trace level="1" type="T">Interface Mapping urn:kadaster-nl:SERV:ZA:KAD:DOVO im_mail_to_dms</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_mm_mail_to_dms_</Trace>
<Trace level="3" type="T">MTOM Attachments are Transferred to the Payload</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_mm_mail_to_dms_.class (urn:kadaster-nl:SERV:ZA:KAD:DOVO, -1) in swcv 5d945f00-b006-11dd-b04f-f8cf0a5b0156.</Trace>
<Trace level="2" type="T">Loaded class com.sap.xi.tf._mm_mail_to_dms_</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_mm_mail_to_dms_$MT$InnerLibsList.class (urn:kadaster-nl:SERV:ZA:KAD:DOVO, -1) in swcv 5d945f00-b006-11dd-b04f-f8cf0a5b0156.</Trace>
<Trace level="2" type="T">Loaded class com.sap.xi.tf._mm_mail_to_dms_$MT$InnerLibsList</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_mm_mail_to_dms_$MT$InnerParamsList.class (urn:kadaster-nl:SERV:ZA:KAD:DOVO, -1) in swcv 5d945f00-b006-11dd-b04f-f8cf0a5b0156.</Trace>
<Trace level="2" type="T">Loaded class com.sap.xi.tf._mm_mail_to_dms_$MT$InnerParamsList</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._mm_mail_to_dms_</Trace>
<Trace level="1" type="T">*** START APPLICATION TRACE ***</Trace>
<Trace level="3" type="T">Document start</Trace>
<Trace level="3" type="T">Start tag [ns1:OpvoerenDocumentRequest]</Trace>
<Trace level="3" type="T">Add raw attribute [ xmlns:ns1="urn:kadaster-nl:SERVICES:DMS:Opvoeren:ZI_KAD_DMS_MAIN"]</Trace>
<Trace level="3" type="T">Start tag [DocumentInfoRecord]</Trace>
<Trace level="3" type="T">Start tag [Type]</Trace>
<Trace level="3" type="T">Put value [302]</Trace>
<Trace level="3" type="T">Close tag [Type]</Trace>
<Trace level="3" type="T">Start tag [Omschrijving]</Trace>
<Trace level="3" type="T">Put value [Apeldoorn]</Trace>
<Trace level="3" type="T">Close tag [Omschrijving]</Trace>
<Trace level="3" type="T">Close tag [DocumentInfoRecord]</Trace>
<Trace level="3" type="T">Close tag [ns1:OpvoerenDocumentRequest]</Trace>
<Trace level="3" type="T">Document end</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_mm_mail_to_dms_ completed. (executeStep() of com.sap.xi.tf._mm_mail_to_dms_).</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="3" type="T">Attached will be Deleted cid:payload-001708D1A20E1DDDAD97A993DAB6CB91(@)sap.com</Trace>
<Trace level="3" type="T">Attached will be Deleted cid:payload-001708D1A20E1DDDAD97A993DB0E4B91(@)sap.com</Trace>
<Trace level="1" type="T">ContentType application/xml</Trace>
</Trace>
</Trace>
</Trace>
Thanks -
Reading attachments within attachments
Hi,
I tested this code that I found and I was wondering if it's possible to read attachments within attachments. We are receiving forwarded messages that have an attachment of type message. The attachment then has its own attachment of type doc. We can break it into 2 parts but we don't know how to break it into 3 parts. I'm sure this sounds confusing so here is the code example:
Object content = message.getContent();
if (content instanceof Multipart) {
handleMultipart((Multipart)content,msgName, mailFr, mailTo);
} else {
handlePart(message[i],msgName, mailFr, mailTo);
public static void handleMultipart(Multipart multipart, String msgName, String mailFr, String mailTo)
throws MessagingException, IOException {
for (int i=0, n=multipart.getCount(); i<n; i++) {
handlePart(multipart.getBodyPart(i),msgName, mailFr, mailTo);
public static void handlePart(Part part, String msgName, String mailFr, String mailTo)
throws MessagingException, IOException {
String disposition = part.getDisposition();
String contentType = part.getContentType();
if (disposition == null) { if ((contentType.length() >= 10) &&
(contentType.toLowerCase().substring(
0, 10).equals("text/plain"))) {
//part.writeTo(System.out);
} else {
//part.writeTo(System.out);
saveFile(part.getFileName(), part.getInputStream(),msgName, mailFr, mailTo);
} else if (disposition.equalsIgnoreCase(Part.ATTACHMENT)) {
saveFile(part.getFileName(), part.getInputStream(),msgName, mailFr, mailTo);
System.out.println("This is an attachment");
} else if (disposition.equalsIgnoreCase(Part.INLINE)) {
saveFile(part.getFileName(), part.getInputStream(),msgName, mailFr, mailTo);If you have an attachment that's a message, then try to cast it to something of class Message or MimeMessage, then you can get parts from that.
-
Where does Mail save attachments to sent messages?
In believe attachments to sent messages used to be saved in the ~/library/application support/mail folder. I don't find any such folder with Mavericks.
Are outgoing attachments saved at all? If so, where?
Thanks,I'm using version 1.4.1.
I tried doing the saveChanges and that didn't help. I do get the following in my msg.txt:
Message-ID: <12270656.1258643679179.JavaMail.jlapoint@ISSWEB-2199>
Date: Thu, 19 Nov 2009 09:14:37 -0600 (CST)
From: test
To: test
Subject: test
MIME-Version: 1.0
Content-Type: multipart/mixed;
boundary="----=_Part_11_13738728.1258643679164"
X-Priority: 3
------=_Part_11_13738728.1258643679164
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
test
------=_Part_11_13738728.1258643679164
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bitDoesn't look like the attachment is in there (I sent a word document). -
How can I read a message in message/rfc822 mime type? The forwarded e-mail is encoded in this type.
MultiPart mp = (MultiPart)message.getContent();
//get the subparts of current part and go through all of them
int partCount = mPart.getCount();
for (int i = 0; i < partCount; i++) {
//get the first bodyPart
BodyPart bodyPart = mPart.getBodyPart(i);
//XXX check here all bodyParts of Multipart if they are instanceof Message. Note that also subparts of the bodyPart may be the attached mail. write a method which is called recursively until the attached mail is reached or there are no more parts in the mail.
Hope this helps you. -
"Error reading reporting point information" message no. RM111
Hello friends,
I am doing the Reporting point backflush for a material and getting the error "Error reading reporting point information", message no. RM111.
i have given the milestone confirmation for the last operation in the rate routing for that material.
Even in REM Profile, Mandatory Reporting time backflush is activated.
In the production version of that material i have given the group of rate routing created for that material in Rate Routing field.
I have created the product cost collector for that material and production version. With costing lot size 1, even i have calculated the cost for that product cost collector. Though regarding costing couple of errors came, than also i saved it.
I am not sure whether system has created the reporting point while creating the product cost collector.How to check it?
Now for that material we have created the planned order.
Now when i am doing the backflush in MFBF t.c by giving the material code,plant and production version, system is throwing the error " Error reading reporting point information.
Thanks and Regards,
JitendraHello siva,
i executed the transaction MF30 as suggested by you, there system displayed following costing errors:
"No control record for Activity type PLVD/1301/ASBY in version 000 / 2010 activity planning/qty planning
Message no. KL023
Diagnosis
No activity planning or quantity planning has been carried out for Activity type PLVD/1301/ASBY in version 000 and fiscal year 2010.
Procedure
Activity Type Planning for cost centers or
Planning Quantities and Prices for business processes.
Even system is not picking the component prices, system throwing the error NO price could be determined for the material and batch so and so.
We are using the Preliminary cost estinmate.
is because of this system is not able to create reporting point in product cost collector?
Please Replay -
Message/rfc822 error in mail
When retrieving older emails from my exchange server I get a format error - message/rfc822 - unable to read format, please re-send.
How can I stop this happening?iCloud email has a 20MB size limit, that's all that can be sent.
The total number of messages you can send each day (200 messages)
The number of recipients to whom you can send each day (1000 recipients)
The maximum number of recipients per message (100 recipients)
The size of incoming and outgoing messages (20 MB) -
Read Attachments in Operations Mapping called by Transformation Step
Hello,
I would like to read the attachment of my input message. I created an UDF that assigns the attachment to to a target field, furthermore I have activated the option "Read Attachments" in operation mapping.
But when I call the operation mapping in a transformation step in BPM, the target field is not filled. Is it not possible to read attachments in BPM?
Thank you for your advice.Attachments are not available inside BPM.
Try to do the mapping outside BPM.
Maybe you are looking for
-
Photos syncing from folder to iPhone all out of order?
I have 2 folders synced to my iPhone 4 photo app. They were previous camera rolls before I set up my phone as a new device. They are all named in order and taken in order, for example IMG_001.jpg was my first picture in my old camera roll. IMG_822.jp
-
I have an array of clusters. Each cluster pertains to a certain oscilloscope I am controlling. There is another control which specifies which oscilloscopes I have "on". If a particular oscilloscope is "on" I want its cluster to be VISIBLE in the arra
-
How do you deploy an application to a user?
I want to setup SCCM so that IT can deploy applications to users. I know that SCCM allows the publishing of a library to allow users to accept and deploiy applicatiosn themseves but I don't want that. I just need to know how to deploy the application
-
Help me debug DAC-104, BC4J
DAC-104: ImmediateAccess: setAttribute failed. ColumnView: Hct row: 1 JBO-26080: Error while selecting entity for Cbc [ODBC S1C00] driver not capable of this operation This is an Oracle Lite source. I'm confused by the ODBC statement - as I thought I
-
Save as excel in numbers 3.0?
I can't save a copy of a numbers spreadsheet as an Excel spreadsheet. I was able to before 3.0 update. Anyone have this issue also? Help!