Hoefler Text has weird rendering of some weights in iWork

I use a more advanced version of the Hoefler Text font than ships with Mac OS X. In Leopard, this worked perfectly—however, following the upgrade to Snow Leopard the font refuses to work properly, rendering everything except Regular, Italic, Black and Black italic as symbols and capitals with negative tracking.
First I thought this was a problem with my copy but I soon realised this was happening to other people too. I really need this font so simply living without it isn't an option.
It is worth noting that this only seems to happen in iWork—Fontbook renders it perfectly.
Please help me out with this.
Thank you in advance.

And what version of iWork are you using?

Similar Messages

Adobe reader x has poor rendering. Some few bugs in there.

Adobe Reader X has some few adds and a beautiful interface. The product however has poor rendering especially when i try to copy text that exeeds to the next page not in view. The find box also creates some patches on the screen while scrolling, blocking text. It also takes a long time to respond when document is minimised for a long time: the tool bar disappears or becomes blank; menu bar has blotches; and reading screen sometimes appear black.

Hello Nicola,
The link you gave above (http://www.aermec.com/files/crivellaro/C01_30.013.565.PDF) seems to be dead, could you please repost another valid link or send the file to: [email protected]
Thanks!
Mark Tezak

My iPhone 3Gs randomly shutting off at any given moment. I could be in the middle of a text, a call, or doing some games and it'll just shut off. Now here's the unique part. When I go to turn it back on, the apple loading screen pops up but it takes some

My iPhone 3Gs randomly shutting off at any given moment. I could be in the middle of a text, a call, or doing some games and it'll just shut off.
Now here's the unique part. When I go to turn it back on, the apple loading screen pops up but it takes somewhere from 3-5 minutes for it to boot up. Then the lock screen with the time and whatnot shows up. From this point on, my iPhone has a chance to shut itself back down and I have to repeat the process over and over again. Most of the time the lock screen flashes and then goes straight to black (shut down) but sometimes I can make it a few menus before it shuts itself down.
The only way to keep the iPhone on is to plug it into a charger of any sort. I'm fairly certain it isn't a battery charge issue because this happens at any % of power and sometimes my iPhone can use up all of its charge and not have this happen while other times I can be at 90-100% and it could randomly shut itself down. What can I do in this situation if some has some solution to this problem please let me know on [email protected] Thanks!

Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

My mac Mini has problem rendering images and video

THE PROBLEM:
My mac mini has problem rendering JPEG image. There are strips on the images. Other images such as GIF, PNG, TIFF, and BMP are displayed nicely.
The images shown in the links below illustrate the problem:
http://www.flickr.com/photos/terencewong/71481156/
http://www.flickr.com/photos/terencewong/73360989/
(Please note that this image is grabbed from my faulty Mac Mini and saved into TIFF. For uploading purpose, I converted it into JPEG on ANOTHER computer.)
For movies, AVI can be playback without problem. But when it is converted to MPEG, it looks like an untunned TV channel.
FIXES TRIED:
I did erase and install 3 to 4 times using both the install disc and my Tiger Family Pack. All ended up with strips on the JPEG images and the generated MPEG movies.
I've also tried to flash the firmware to 113-xxxxx-124 using ATI's october 2005 universal ROM update, however, the ROM Revision shown in System Profiler is still 113-xxxxx-116 no matter how many time I reboot the system.
INVESTIGATION:
Yesterday, I did some research and got to know that JPEG and MPEG are using DCT (Discrete Cosine Transform) for decompression. And the ATI Radeon 9200 chip provide such a transform on hardware basis, which free the CPU from doing something else. Feel free to point out my inaccuracy.
HARDWARE SPECIFICATION:
I bought the Mac Mini in the last Februray.
The system Boot ROM version is: 4.8.9f1
Display card is ATI Radeon 9200
Chipset Model: ATY,RV280
Revision ID: 0x0001
ROM Revision: 113-xxxxx-116
A POSSIBLE CONCLUSION:
I suspect that it is this part of the chip (the DCT) that is faulty.
Anyone know how to fix this problem?
Many thanks!

Assuming that your display is tightly connected, thus the problem is not caused by something as simple as that, the fact that a full erase and install has not removed the problem would, I think, point to this being a hardware issue, and given that everyone's mini (with the possible exception of some of the latest ones) has the same video chipset as yours, and do not suffer the problem that you appear to, it seems very likely that your mini has a fault which is in need of repair.
If you have an Apple Store nearby, I would take it there to have it checked out - at the very least they should be able to replicate your problem using an in-store display, and if not, thusly suggest it's something external to the mini and concerning your display or something very unusual in the immediate environment of the mini. If you don't have an Apple Store in reach, I'd take the system to an Apple authorized service provider since at the present time it is under warranty.

I have just uploaded my iWeb site to a FTP host and most of the site is ok however a lot of the text has gone very strange! How can i get it to publish the same as I designed it? Thanks in advance....

Please help! I have just uploaded my iweb site to a FTP Host and most of the site is ok however a lot of the text has gone wrong! Many thanks...

Maybe you could let me know which hosting service you are using so that I can add them to my list of those NOT recommended for iWeb users!
I just dealt with one today who claimed the iWeb sites were incompatible and that the first line of code should be deleted from every HTML file before upload to their server.
They didn't even offer the information that it would be a lot easier to modify the .htaccess file never mind offer to do it for a customer.
Nobody should expect to pay for service like this and the answer is to dump them and go to a company that gives you some value and support for your money. If the ones on this page don't meet your requirements for cost and service...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
... search this forum for those recommended by other users. There's a long list of them.
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Is Hoefler Text safe for the web?

I notice that Hoefler Text is the default font for the Highlighter theme. Yet it does not appear in the web-safe fonts list.
Should I change all my pages from Hoefler Text to a font on the list?
Will I run into problems by leaving them as Hoefler?

Keith Raygor wrote:
I notice that Hoefler Text is the default font for the Highlighter theme. Yet it does not appear in the web-safe fonts list.
I started with Hoefler and ran into trouble with the way my text looked in Windows, particularly with IE. So, after some experimentation, I changed to Verdana.
Phil

Automatic insertion of glyphs in Hoefler text

I'd like to format my book using Hoefler text, with a Zapfino Glyph symbol as the section divider. Is there a way to assign a key to that particular glyph? Or assign a symbol/text substitution key? I tried the text substitution and it came out as a black ball. I have to insert it many times, and doing it manually takes up too much time. Thanks.

Tom Gewecke wrote:
Apply it from the *Favorites tab* by double clicking on it, or by dragging it onto the page.
But his problem is precisely that he does not want to do it manually but by using a keystroke.
Guess that's not going to happen.
Interesting that Pages does not support glyph variations!
On my Pages it does not say that, but "This is a glyph variant. It may not be displayed correctly in other applications or on the internet." As the OP has indicated, he can input these glyphs into Pages without problem.
On mine it says this application does not support glyph variations. It also possibly explains why you are getting the bullet character in place of the actual glyph.
Explains why it can't handle Arabic or Hebrew properly either.
There is no connection between that and Pages bugs with RTL scripts.
If Pages does not support glyph variations there very well could be a connection.

Italic and bold fonts for Hoefler Text are no longer available to MS Word

Apple provides regular, italic, black, and black italic styles for the Hoefler Text font. I've used them before but since I installed Snow Leopard, I cannot creat italic or bold (black) in MS Word. When I make text italic or bold (black), the characters disappear--the sentence shortens as if I had deleted the phrase, but if I change it back to regular, it reappears.
Font Book shows that I have all of these styles of Hoefler Text in the Library. I tried disabling and then enabling, but that didn't work. Has anyone else encountered this problem? If so, have you discovered a solution? Thank you.

Thanks for the file. It obviously helped, but I am not sure how. I probably should have taken careful notes about what I did by way of disabling and removing the .ttf fonts and then dragging in the .dfont variety. At one stage when I brought up a Hoefler document in Word, the regular Hoefler text had disappeared. I panicked and removed the .dfont version. Later, after trying something else, the text came back but (judging by the numerals) it was not Hoefler. To make a long story short, all styles of Hoefler (including italic and black) are now working. There are no duplicate font files—I used Remove Duplicates—but I have no Hoefler file in either of the two Fonts folders, even though I can see Hoefler Text in Font Book! To be safe, I used Font Book to export the Hoefler Text to a back-up folder, and the version it exported is the .ttf version. In Get Info I confirmed that it’s the 6.1d7e1 variety. I restarted the computer twice, and determined that this situation is stable. Go figure.
In any event, you set me on the right road. Hoefler Text is now working as it should. I appreciate your help.

Installed new fonts, now Chrome has weird fonts instead of Times?

I installed some new fonts on my mac and now Google chrome has weird fonts (assumably apart of the new ones I installed) replacing the standard Times and other fonts on some occassions. I took some screen shots to demonstrate this:
Those are the two weird fonts. I'm not sure what they actually are called. I went into chrome and switched all of the font options to Times but it didn't change anything.
Please help because this is really quite annoying.
Jake

Jacob...
Sometimes third party fonts can cause problems on a Mac especially for the browsers.
Try troubleshooting duplicate or corrupted fonts > Font problems and management in OS X | MacFixIt - CNET Reviews

My MacBook Pro Retina's Bluetooth chipset unknown/odd login message on the login screen states Login Window Authentication Login window Name edit text has keyboard focus. In addition, the login screen is not remembering me

I have been experiencing several issues with my MacBook Pro Retina mid 2012. My MBPR is scheduled to go into the depot. However, I am wondering if anyone may be able to shed light on a few issues as this is the third "official" time my MBPR is going back for service ("one depot" trip; "one authorized" dealer; several in-store visits).
My Bluetooth is stating that the Bluetooth Chipset is Unknown (0). I also have had Bluetooth Preferences mysteriously change on me. In addition, while Bluetooth is off there are two serial modems turning on. I have turned them off, but they continue to pop up.
In addition, when I log in, my MBPR is not remembering me and my login name is not appearing on the slate-gray screen. The name and password are blank and the following message appears in the lower left hand corner. "login window authentication login window Name edit text has keyboard focus." As a side note, I am the only user. The login issue is a recent occurrence as we just totally wiped it again via a Command + R, and I don't believe I have an accessibility setting set to anything that would cause this, but wanted to check.
Should I be concerned here? Has anyone else had issues like this? I don't want to worry if I don't have to. I have had so many issues over the course of nine months. 5-6 wipes. Airport card replaced and I am about to pull my hair out if my MBPR doesn't come back worldly like clock work this time. I just can't send my days trying to get a $2300 product to work for me any longer. No idea what is wrong with it, but it is driving me insane. Cross your fingers for me and any guidance you have or thoughts would be welcomed. Thank you. EMM

A few more issues...
In Console, the following is greyed out:
User and Diagnostic reports
Com.apple.launchd.peruser.0
Com.apple.launchd.peruser.88
Com.apple.launchd.peruser.89
Com.apple.launchd.peruser.92
Com.apple.launchd.peruser.97
Com.apple.launchd.peruser.200
Com.apple.launchd.peruser.201
Com.apple.launchd.peruser.202
Com.apple.launchd.peruser.212
*[user logs are accessible]
Krb5kdc
Radius
My guest files are locked, but again I am the administrator of MBPR.
I am worried about a keystroke logged or at least, trying to rule it out.
Also:
Mdworker32(225) [and other mdworker numbers] are sandboxing; stating deny Mach-lookup
Com.apple.Powermanagement.control, etc. long attachment with those files with version: ??? (???).
Postinstall: removing applications/Microsoft Office 2011/Microsoft Outlook.app
WARNINGS in Console include:
[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 19.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction] instead.
There are a ton of other warnings. Before I go through this again, can someone tell me if this is normal (all of it -- above too); or if these are symptoms is a keystroke logger or hardware issues?
I ask because originally, when my computer went in for diagnostics (more than once), Apple stated the hardware was fine (other than Airport Card -- finally). However, if I've done 5-6 total wipes; created new users; do not have sharing set-up; have not played around in Terminal; and am up-to-date with versions -- and various issues KEEP COMING BACK -- I am left wondering if a keystroke logger would be possible here?!? I thought maybe a faulty logic board, but why would diagnostics be okay, then? Not trying to be hyperbole, just desperate.
Please help me rule keystroke logger out or at least, tell me so I know, so I can take appropriate action. If you think it could be the logic board with symptoms above, that would be a great too.
All I want to do is use the computer as intended, but I can't seem to get a real answer, so after nine months -- I am turning to the communities to see if anyone -- anyone at all -- can help. The last thing I can do is have the MBPR come back from the depot and the same thing occur. Any guidance or advice would be so gratefully appreciated.

I have a Text control string box with some initial text. I would like to highlight old text with click of mouse and type in new data from keyboard

I have a text control string box with some initial text (says: Please enter Name). I would like the operator to click on the text control box and have it automatically highlight so that when new data is typed in the old erases (all at once) and the new data is now in the text box.
I tried using the "Text.Selection" property node and when I run it and put the mouse inside the text box the initial text is highlighted and if I press "delete" on the keyboard or if I start to type in new data the initial data does delete but once I start to type new characters they erase each other. For example if I want to type in “Willi
am” I type the “W” and then the “I” but the “I” erases the “W” and now I am only left with an “I” in the text box and so on. I appreciate any help

It seems you are continuously setting the property node over and over again. This should only happen once if you mouse over it.
Create a property node for your text control with the following three items:
(1) KeyFocus (wire a "true" constant to it)
(2) Text.SelStart (Wire a "zero" constant to it)
(3) Text.SelEnd (Wire a constant containing the string length of the text).
Put this property node inside an event structure, triggered by "Mouse enter" on the string control.
(see if the attached example works for you)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Enter_Name.vi ‏23 KB

Record has been changed by some other user

Hi All,
i am working on a network when i make some update in my database through a form on first updation it works fine, while on second updation it gives me an error 'Record has been changed by some other user' wile no other user is currently working on the same form.
Plz tell me what i can do.
Wating 4 your reply.
Thanks in Advance.

You probably have a database trigger which changes the value of a column which is also part of your form.
The solution depends on the version of Oracle forms and the database that you are using.
Oracle forms 6 introduced a DML returning value (block level) which you can set to Yes so that the value(s) changed by the server will automatically be updated within the form. However, you must be running against an Oracle8 (or later) database for this to work.

Itunes on Windows 7 only displaying icons and pics? Text has disappeared?

Itunes on Windows 7 only displaying icons and pics? Text has disappeared? Library content is still there but all text details now missing

Same problem here! Driving me nuts that it is somehow "running" as shown in the task bar, but it is not accessible in any way.

My movie has clips that have some extracted audio that I would like to use for the menu music in iDVD 11. Does anyone know how to do this? Copy and paste does not seem to work.

My iMovie 11 movie has clips that have some extracted audio that I would like to use for the menu music in iDVD 11. Does anyone know how to do this? Copy and paste does not seem to work.

I would use Quicktime Pro.
See: QuickTime Pro: How to Extract or Disable Tracks at http://docs.info.apple.com/article.html?artnum=42596 and QuickTime Player 7 Help - Extracting, Adding, and Moving Tracks at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c3qt6.html
To get Quicktime 7.6.6 for Snow Leopard see: QuickTime Player 7.6.6 for Mac OS X v10.6.3 at http://support.apple.com/kb/DL923 (Quicktime 7.6.6 is the latest version.)
To upgrade to Quicktime Pro see: QuickTime Player 7 Help - Getting QuickTime Pro at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c2qt.html

How do I fix or open a corrupted file that has been corrupted by some sort of programmatically email

How do I fix or open a corrupted PDF file that has been corrupted by some sort of programmatically emailing?
Please see the following screen shot:
http://i67.photobucket.com/albums/h292/Athono/pdfproblem_zpsbd9bdc00.png

Well, it is a pdf file, and it once was a readable one, I suppose.
It must have data on the hex or binary level that can be retrieved.
If necessary, I will have to look into the file format of a PDF file? Is this documented?

Hoefler Text has weird rendering of some weights in iWork

Similar Messages

Maybe you are looking for