HOLD button in the work area

Hi All
When Buyer can HOLD (button ) functionality .
even we add sc item into the workarea sc is available for buyer forever . Why HOLD functionality is required for the BUYER.
What is the SAP definition for thiS HOLD functionality in ****[pit work area.
Muthu

Thanks Pedro !!
for example
sc 1000/1 - i added to work area (by Muthu) and others can not source other than Muthu . so pedro and matew can not source.
it internal meaning is that other BUYERS are protected that cart .
1000/1 taken to cockpit and put HOLD by Muthu , now pedro and mathew can not search and assign this cart into their workitem.
PLEASE CORRECT ME MY ASSUMPTIONS IF I WERE WRONG.
Muthu

Similar Messages

The hold button won't work and this morning i cracked the screen!!

Hello,
I was wondering if anyone can help me! The hold switch on my ipod nano does not work, or is very slow. It only works if I press down very hard on the hold button. This is of course very frustrating!
However, just this morning I cracked the screen.I know that cracked screens are accidental damage and are therefore not covered by warranty, but the hold button was not working before the screen was cracked- it is just bad luck that this has happened before sending my ipod off to Apple to see if they can resolve the issue.
Does anyone know if it is possible to get the hold-button issue fixed even though the screen is cracked? I am a bit of a disaster area with electrical goods, having cracked the screen of my laptop and of my phone in the past!
Thanks
iPod nano Windows XP

I believe it is a hardware issue, you have to send it
repairing.
yeah but I won't be able to get the repair done on warranty, will I?

Hi. The buttons and wheel of my iPod 4th generation do not work. The hold button resets the iPod, and the shuffle shake works. The music plays by shuffling but I can't access albums etc due to the buttons and wheel not working.

Hi. The buttons and wheel of my iPod 4th generation do not work. The hold button resets the iPod, and the shuffle shake works. The music plays by shuffling but I can't access albums etc due to the buttons and wheel not working.

Did you restore from backup?
Next would be to restore to factory settings/new iPod since maybe you have some corruption in the backup

How to find workarea ID for the work area name.

Hi Experts..
How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
Points would be rewarded for helpful answers..
Thanks
Kunal Halarnakar

U want to fetch the workarea description ?
we can fetch it from CCIHT_WALD table with the RECN value.
The informations are stored in AUSP table with the characterstic(ATINN) value.

Is it possible to add a button into the spliter area of a JSplitPane?

I want to have a button in the spliter area of the JSplitPane. the purpose is to add an item from the upper component to the lower component. is it possible to do it in this way?

the above link requires to register using $$$ before u can view the code, so poor me didn't go. but anyway, i worked out how to do this in the easiest way:
JSplitPane mySplitPane = new JSplitPane();
BasicSplitPaneDivider divider = ((BasicSplitPaneUI)mySplitPane.getUI()).getDivider();
divider.setLayout(new FlowLayout());
divider.add(new JButton("haha"));then u can try to show() this split pane in any frame or panel. just get the divider obeject then modify it in any manner u like.

Item & for schedule line & is in the work area

Hi All,
We added some custom fields on the schedule line tab and also in VBEP table. For thie same we also added code in the PBO module of SAPMV45A/4500 screen#. Since we added the code we are getting the error message# V1357 with description 'Item 000010 for schedule line 000040 is in the work area'.
I did check the forum and found couple of notes with this error and some replies say that it is for the quality issue. I tried going to OQ77. But i am pretty sure it is because of what i codded. Because When i comment my code so error shows up. But I am not sure what is the problem with my code.
Here is the sample of my code that i wrote in my PBO module:
    IF XVBEP-VBELN IS NOT INITIAL.
        INPUT = MARA-BRGEW * XVBEP-WMENG.
        PERFORM CONVERSION.   "This is the module that i wrote to convert from G to LB.
        XVBEP-ZTOTALWT = OUTPUT.
        xvbep-updkz = 'U'.
        modify xvbep index ivbep-tabix.
    ENDIF.
Please let me know if i am doing wrong anywhere in the code.
Thanks,
Karuna.

Issue: I got the issue resolved. The mistake i made was the local structure was holding last item which has 1 schedule line and the my first item10 was having more than 1 schedule lines and trying to loop all the schedule lines. As the last item has only one schedule line i was getting the problem.
Solution: I reset the structure to that it will loop from the first line item instead of it holding the last item#.
Hope this helps.
Karuna

HOLD BUTTON DOESN'T WORK AND IT'S STUCK ON HOLD!!!!!

I thought I had broken my ipod because I could not turn it on, but then when I plugged it into the charger it turned on. I then realised that the hold button did not work and it was stuck on hold so I could not take it off hold to use it. Does anybody know a way of solving this problem???

b Does the computer recognize it?
yes
No, it does not. That is why iTunes does not recognize it.
The iPod turns on when you plug it in because it is getting power from the cable. This does not mean the computer recognizes it.
Read the link posted above (and the related documents at the bottom of the link)
Restoring iPod to factory settings
http://docs.info.apple.com/article.html?artnum=60983
iPod only shows an Apple logo and doesn't start up
http://docs.info.apple.com/article.html?artnum=61584
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651

Hold button doesn't work

I have an almost 1 year old 5th generation iPod.
When I move the hold button so the iPod will be on hold, the wheel doesn't lock nor does the lock appear on the iPod. This happens irregularly. So I might be using my iPod one day and the hold button works, and then an hour later it doesn't. But now it's not working at all.
I always try restarting the iPod but nothing happens.

I'VE FIXED IT!
IMine has been locked for 2 days... I researched the nnet for Hacks and other things and finally found some other folk with the same problem. After trying the press 'the side till it clicks' trick, (didn't work... no click) I kept experimenting with various firm but gentle presses... on side, back, etc etc... In the end this is what I did to unlock it...
* Place "Locked in Hold" iPod on it's edge on a firm desk.
* Glently but firmly press down on the edge with the palm of my hand, squeezing the unit against a desk...
* and at the same time, stroke the touch wheel...
* When (if?) the backlight comes on the iPod starts to respond to the touch wheel...
* and while still pressing firmly, move the hold switch from On to Off!
Take care not to slip and slam your unit onto the desk, or do anything that could physically break anything inside, or crack the screen, etc.
I recommend you avoid anything to do with screwdrivers

My ipod hold button douse not work.

my ipod (nano) hold button douse not work it will only work if i pluge it into my comp i will disconnect it and will stay on. But if i try to turn it on not connected not my comp it will not work. If my hold butting is on or off and my ipod is on i will work even if my hold butting is on. What is up with that? please excuse my spelling. i hope you can help me also have a great day. If u have any other questions plz e-mail me or post me them.
Windows Vista

i am going 4 a trip i will be in a car for 4 hours i need to know if i can get it in befor the end of the weak. is that posibull?

More then one photo open in the work area

I Photoshop and earlier Elements I could place as many photos in the work space. I use this to move layers from one to the other. You could hold the shift key and drag from one photo to the other. Can't find the setting that allows this. I can only have one photo open the work area and all others are sitting in the ben at the bottom.

You don't state which version of Elements in use. I have PSEv.8.
In full Editor, go to Edit>Preferences>General and tick "Allow Floating Documents in full edit mode".
The arrange icon at the top provides for "Float all in Windows".

How do you reset the Work Area Bar to auto adjust?

This is something that's been a thorn in my side for a while. Maybe I'm just being OCD about it... but I've been wondering if there is a way, once you reposition the I / O points of the Work Area Bar (WAB) you can get Pr to go back to auto adjusting it to the end of your clip.
You can double-click it to get it to expand to the full length of the sequence, if you remember to do that... Sometimes I'm in a rush, or I have 10 sequences and I miss the fact that my WAB is not all the way to the end. I select and batch drag them all to Media Encoder and *POW*... I've forgotten to stretch the Out to end on one sequence ... and I have to re-render. A pain, yes, something I should have double checked, but at 2am these things can get missed.
So, can you get the Work Area Bar to auto adjust again?
If yes, it's probably something ridiculously obvious – but I'll take it!
Thanks
Stephen

I would have an issue with auto or a default for a number of reasons.
Not least this one...
I now place dummy clip ( black video) a distance off the end of my sequence to prevent the End of Sequence Marker displaying at the end of my edited material. I dont want that included in an export.
Here is another...
As I get to lock down and I am sending previews to clients...I insert Black Video head and tail of the edit so that the preview does not start jarringly on first frame video. I have I and Os marked so that I can simply export "Program at length (without black head and tail) when I come to master.
and...
Often I have edit versions (TVCs) on the same time line ( sequence) and I need to adjust WAB or I/Os to export them separately.
Automating stuff to eliminate our dumb moments doesnt help much because it just opens the chance of another dumb moment driven by expectation and forgetfulness. .
Mental checklist is the only way IMHO.

How to delete a shortcut favorite from the browser in the WORK Area

Hiho,
creating a shortcut favorite icon of a browser-website in the work area shows up a symbol to use this shortcut. In the private area I can delete this favorite-symbol by tapping longer on the icon an a trashcan shows up, so I can delete the icon (and the browser favorite from the private area). Not so in the work (buisiness) part of the BlackBerry, there is no possibility to delete this icon. I can't find a policy on the BES10 server or thomething on the Z10, any ideas how i can remove the icon?
Greetings... Ifrani

Hi Ifrani!
I´ve the same problem on my Z10!
CommanderApollo

When I open an image in Photoshop, I cannot see the file. The thumbnail in on the right, but I cannot see the image on the work area. I am using Windows 8

When I open Photoshop CS6 I cannot view the image. The thumbnail is visible on the right hand side and the work area shows the file information, but no image. I have updated PS, my driver. It is the same for both jpg or RAW.

Be sure your graphics drivers are up to date. Try disabling GPU acceleration in the preferences then restart Photoshop.
Benjamin

How to make the CTI respond to the work area again?

Hello,
i suddenly have a unusual problem (4 me). I work on a project and i noticed today that the CTI dose not act according to my work area when i RAM preview. After pressing 0 it just goes after the end of the work area continuing to render
. (green line)
And also it does not start to render at the beginning of the work area. It uses somehow the comp's lenght...
Please advise.
Thanks!
I attached a photo so you can see what is it about.

If you leave "From current time" enabled, you can use 0 to audio preview from the current position or shift-0 to audio preview from the beginning of the comp.

Problem in Printing the work area

Hi Everybody,
I'm working in upgrade project.
in 4.7 version, directly trying to print the work area and assign to some other fields.
Eg: write: Mara.
text = mara.
but in 6.0, its not allowing to assign directly like this.
Plz help me urgently. B'coz, we struck in middle.
Thanks in advance.
Regards,
JaganMohan.

Hi,
basically the problem might be in the ecc 6.0 for the attributes of the program where u r writing it might be u checked the unicode check box if it so remove it and then try or else it is proiblem with the unicode in the ecc 6.0 system where u r working
plzz reward if it is usefull
plzz dont forget to reward...

HOLD button in the work area

Similar Messages

Maybe you are looking for