HOLD DOCUMENT NUMBER RANGE

Hi.
Is it possible to maintain the internal no range for Hold documents?
Regards,
Srini

Hi,
No its not possible. Hold document number is a temporary number and can be external only.
You can go through the following thread for more info
Re: difference betweeen hold & parked document
and if you search for Hold and park in SDN you will get so much of info.
Hope it helps
Regards
Jyostna

Similar Messages

How to control Held documents number ranges

Hi Gurus.,
pls tell me How to control Held documents number ranges.,
its urgent .one of my client asking separate number ranges for held documents
with regards
ramesh

Dude,
I understand you are refering Hold Document not Park document. Becoz Park document use the same number range which is used for normal document posting. However, for Hold Document Number ranges, i advice you to liaise with your Abaper for BADI/Exit/ or etc etc.....for maintaing a specific number range or validation of number given.
pls assign point if useful

Document number range not creating in Ecc 6.0

Hi
I have tried creating document number range in 6.0, but the change interval buttion is in display mode and not in the change mode, so not able to cretae number range. Any input.
Urgent please help.

Hi Sidhu,
It could be the limit of the authorization.
So try to check whether you have an authorizatin to change the interval or not.
Hope it helps.

Document Number ranges

Dear All,
Pls help me to solve the issue reg document number ranges.
We have defiend the document number ranged for two company codes. Now ths issue is.. this document number range is being used/shared by both the company codes. For ex.. Invoice 01, 02 and 03 is posted in the company code A and we have not posted any Invoice in the Company Code B. If we post the Invoice in the Company Code B, number for the Invoice will be 04. And the next invoice in the Company Code A will be 05. But i will required to change the configuration to split the document number ranges..
Pls help me to do so.
Thank you

Hi,
This thing is obvious if the document number is being shared by more than one company code then it will act the following way...
for example :- Company code "A" is assigned with document number 01 and if you raise an entry it will take the range from 01...like document number generated will be 0000001
Company code "B" assigned with the same document number range 01 the next entry will create the next available number that is ....0000002
This happens b'cz its being shared by both the company codes.
Hence you have to keep seperate document number range for both the company code to avoid this confusion.
Please assign points.
Zia.

Document number ranges changes

Dear friends,
While creating the document number ranges for current year, user wrongly changed the previous year number ranges, now it is giving new number ranges for new documents which are posted in previous year, how to reset the previous number ranges with out effecting the documents which are already posted.
regards,

Dear,
It is the only way to insert a correct number rang to the current year, and change the document No which posted to previous year wrong to the correct fiscal year. then correct the "current number" to the last one posted in previous year.
But these corrections need necesary authorizations and ABAP knowledge.
With Best Regards,
Gladys xing

Document number ranges in entry view and in General Ledger view

What is the difference between Document number ranges in entry view and in General Ledger view ?
We have new GL activated in our system , and found that the GL Document types ( SA) are assigned to document number ranges in entry view . What is the need to define document number ranges in General Ledger view ?

Hi,
Document Number Range in entry view is the document numbers which are posting in your leading ledger. You cant achieve the same document number range to the general ledger view. A General ledger view can have both Leading ledger view and non leading ledger view therefore document number range should not be kept same for both ledgers as your running document number gets skipped.
That to some times you can only post documents to only Non Leading ledgers. Therefore a separate number ranges needs to be created for general ledger view
Hope u understood.
regards
srikanth
Edited by: boddupalli srikanth on May 21, 2009 9:28 PM

Document number ranging

How to do document number ranging in B1.How to see full details of G/L document.

Hi,
Go to Administration > System Initialization > Document Numbering > Here you can define numbering range for default series.
Can you explain what type of detail you want.
Regards,
/Siddiq

Document number range - per fiscal year and continuous

Hi Experts,
In document number ranges, generally the FI dox have number ranges which start afresh every year whereas MM and SD dox have continuous number ranges over the years. It is possible to have continuous number range for FI dox also, but not many people use this.
Why this differenciation between FI and SD/MM? Why SD/MM also do not have fiscal year based number ranges?
Also, where do we define that doc range will be year specific or not? or is it SAP standard that FI will be year specific and SD/MM will be continuous?
Thanks and Regards,
Sadhana

HI Sadhana
You have the option to have document rumber ranges either on fiscal year based or upto 9999 year.
This can be done in FBN1.
for posting material documents also above situation applies.
normally everybody prefer to have fiscal year based number range as FI documents are more in number.
You can go through other forum members solution also
Regards
A Chandrasekaran

Document Number Range problem

Dear All,
Previously Document number range(FBN1) for Invoice was External, then i have changed to Internal number, now the problem is that in Counter it shows 1800000126 but system is showing document number 1800000136. Pls help on this & when i am changing from Internal to External system is showing error as "Lower limit can only be changed during Initial Entry".
Pls pls help on this.

Dear ranjith,
If you want to change number ranges from external to internal no ranges,
from T-code FBN1 you can for the changes first go to ,<change status button> and make you counter no as 0 and save the intervals,
and come to change intervals button and change the no ranges according to ur requirement.
Assign points.
SU

Document number range object

Hi
Please tell document number range object . T-code :FBN1
PLEASE URGENT
Thanks
Krishna

Hello
A number range must be assigned to each document type in the SAP System. Via the document types, you distinguish the postings according to the different business transactions, for example customer payment, vendor credit memo, and so on. To store documents separately according to document types, you must assign a separate number range to each document type, for example to invoices or to credit memos.
In the following activities:
You define your document number ranges.
You can determine which intervals of document number ranges are to be copied from one company code into another.
You can determine which intervals of document number ranges are to be copied from one fiscal year into another.
Define Document Number Ranges
In this IMG activity you create number ranges for documents. For each number range you specify (among other things):
a number interval from which document numbers are selected
the type of number assignment (internal or external)
You assign one or more document types to each number range. The number range becomes effective via the document type specified in document entry and posting.
You can use one number range for several document types. This means you can differentiate documents by document type but combine them again for filing the original documents, provided you store your original documents under the EDP document number.
Note
The type of number assignment is of special importance. For each document type you should check whether a separate number range must be used and which type of number assignment is most appropriate.
One example of a case where external number assignment would be suitable is when you transfer documents into your SAP system from a non-SAP system. The numbers must be unique. The number range is not displayed with external numbers. You must therefore ensure that you do not skip any numbers when entering numbers manually (for organizational reasons).
You should use internal number assignment if the original documents do not have a unique document number. This is the case, for example, with vendor invoices.
Number ranges for documents are company code-dependent. You must therefore create your number ranges for each company code in which the document type is used, namely with the same number range key.
The number intervals must not overlap. If you use year-dependent number ranges, you can specify the same interval with the same key several times for different to- fiscal years (the limit up to which a number range is still valid). If you want to define number ranges which are independent of the to-fiscal year, enter 9999 in the to- fiscal year field.
Caution
For sample documents, use a number range with key X2, for recurring entry documents with key X1. These keys may not be used for other number ranges.
Recommendation
Store your original documents (paper documents) under the EDP number of the SAP System. You should write the EDP document number on the original document. In this way, the original document for a business transaction can be found at any time.
Activities
1. Determine how document filing is to be carried out in your company codes.
2. Define your number ranges accordingly.
3. Make sure that the number ranges are assigned to the corresponding document types.
Copy to Company Code
In this activity, you can copy intervals of document number ranges from one company code to other company codes. To do this, you have to store the following information:
Intervals which are copied
To fiscal year(s) (validity limit up until which the number range is valid)
Company code from which you copy (source company code)
Company code(s) into which you copy (target company code(s))
Activities
Make all necessary specifications for copying the number ranges.
Note
The number ranges are only copied into a target company code if no number ranges exist there within the selected "To fiscal year" interval.
Notes on transporting
The documentation for the step "Define document number ranges" describes how to transport document number ranges.
Copy to Fiscal Year
In this activity, you can determine which intervals of document number ranges are to be copied from one fiscal year into another per company code. To do this, you have to define the following information:
Company code(s) within which you copy
Number range number(s) which are copied
Fiscal year from which you copy (source fiscal year)
Fiscal year into which you copy (target fiscal year)
Activities
Make all necessary specifications for copying the fiscal years.
Note
The number ranges are only copied per company code into the target fiscal year if no intervals exist there for this fiscal year.
Reg
*assign points if useful

Document Number range restart

Dear Experts,
Our FY is from Jan-Dec. therefore, we will be starting New FY Jan 2010.
Please help me and let me please know, whether to start a New FY with restarting FI document number range.
I check in SPRO settings for most of the document number range interval ID the year against it, is mentioned as 9999.
is it fine if i copy FY 9999 to FY 2010, i hope it will not overlap while posting any documents.
please help me.

Hi,
    The Year is always a TO-Year.
What you should have done is either:-(While no one else in the system to avoid inconsistencies)
    a) Create a new line with Year 2009 and the current values of 9999, then set 9999 to initial values.
         This way the numbering is reset to initial from 2010 onwards, and old year postings continue to use the non-initial range.
or b) New Line 2009 like above, delete 9999 entry. Then before each year starts run the above mentioned copy year function.
         This way each year will start initial.
Kind regards

Profit Center Wise document number ranges

Dear friends
At our client place ECC 6.0 is implemented. The org structure is : One Company Code and 6 profit centers.
Now the requirement is document number ranges at profit center level and not at Company Code level.
Can we assign the number ranges at profit center level?
Thanks in advance.
Regards
Kiran A

Hi
If you have new GL and PCA active, it would be very difficult to have Document Types assigned at profit center level. The document types are assigned at company code level and not profit center. There would be many transactions which would have multiple profit centers. How would you seggregate them, even if you use different document types as suggested for various profit centers?? Morever, most of the posting in FI come from other modules and are posted by the system because of the transactions in other modules. So it is practically not feasible to have profit center wise document numbers.
However, for Indian Scenario, you can have SD Tax Invoices for every plant, where billing is done. Secondly, SAP has delivered excise documents to be numbered differently for every excise registration.This is to meet the Indian Reporting requirements.
Regards
Sanil Bhandari

Create document number range 22 using internal number assignment

Hi friends,
now i am working upgradation project from 4.7 to 6.0. sandbox i created one Asset, After that i posed amount to that asset by using f-90.now i run depreceation in ABAF T code the bellow issue is comming
Create document number range 22 using internal number assignment
     Message no. AA776
Diagnosis
     Processing terminated because the document number range 22 for year 2011
     was set up with external number assignment.
System Response
     For periodic posting of depreciation, you have to create a document
     number range with internal number assignment, since the document numbers
     are assigned from Financial Accounting.
Procedure
     Change the number assignment for the number range 22 from external to
     internal in Customizing for Asset Accounting. See SAP Note 890976 for
     more information.
But no ranges for that particular year having, if any changing that one it s not come edit or deleating
ple any one help me
Regards
Gangadhar reddy

Hi Gangadhar,
after 4.6C the Internal Number Range was changed into external Number Range due to technical requirements.
As the error messages due to posting manual into the affected number ranges could not be hindered in this case with ERP2005 the desicion was made to rechange to internal number range. Note 890976 describe what to do here.
regards Bernhard

MIRO document Number range buffering problem

Dear all,
My MIRO document number is not following the sequence. if my first 5 numbers come in a sequence, then the next 5 numbers are not coming in between. Instead, the next 5 numbers are coming. It might be due to number range buffering problem. How to find the number range object for MIRO document number range?
How to solve this?
Please suggest.
I will award full points.
Thanks & Regards,
AR

Hii,
You can search the Number Range object in T-Code: SNRO
The Number Range object for Invoice document is RE_BELEG
Go the Change Mode of the Number Range Object in SNRO, remove the No of Numbers of Buffers (by default it will be 10).
This will resolve your issue.
Regards,
Kumar

Cash Journal Document Number Ranges

Hi
I want to give different document number ranges for Expense Posting & Income posting done through Cash Journal.
That to different ranges for different Cash Journals.
So Kindly guide me as to what cofigurations needs to be done while setting up Cash journals.
What document number ranges need to be defined in different document types?

Hi
You can use different document types for vendor,customer and GL Postings.However, the document types can have only one number range assigned at the company code level. Moreever, cash journal also generated a cash voucher number which is specific to that cash journal. So you need to adjust accordingly as per your requirements.
regards
Sanil Bhandari

HOLD DOCUMENT NUMBER RANGE

Similar Messages

Maybe you are looking for