Hold Switch Not Responding

No matter how many times I toggle the Hold Switch, my iPod will not work on it's own. It will only work when docked with my iBook.
Any suggestions?

try a reset.. PUSH AND HOLD the menu button and the middle button at the same time for 10 seconds.. it may not work the first time. you may have to try it a few times before it will work..

Similar Messages

  • Nano 4th gen hold switch not working

    Hello. I just bought a used nano 4th gen on eBay. The hold switch is not working - the click wheel remains active and no lock icon appears in the upper right corner of the screen. It's on the latest firmware 1.04 and I've done a restore twice already.
    The seller claims the hold switch did work before he sent it. Is there anything I can try to get it to work? It's out of warranty.
    Thanks
    David

    iPod nano (5th generation) - User Guide
    Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. _If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for *two years* from the original purchase date of your iPod._

  • App switcher not responding after closing an application

    I'm running OS X 10.9.4 on my late 2012 MacBook Pro Retina and I am experiencing an odd issue where the App Switcher is not responding right after closing an application. It seems that some applications cause this issue more than others. For example: when I closed Numbers and then attempted to go to another application using the App Switcher, the App Switcher did not respond to my respond to my requests for at least 10 seconds. It's as if there is a library that is getting locked by the closing application that prevents the App Switcher from being launched.
    Has anyone else experienced this issue? If so, is there a resolution to it?
    Thanks for the assistance.
    Chris

    You will need to build the application through the project explorer, set the the .rtexe to 'Run as startup', and then deploy it.
    'How Do I Deploy a Startup Executable to my Real-Time Controller?'
    http://digital.ni.com/public.nsf/allkb/B37FA04A1CB84B6C862571A30060EF03
    If that is still not working, you may want to consider:
    1. Checking to make sure that you can establish a connection between your project and the myRIO. Right-click on your myRIO target in the project and select 'Connect'
    2. Verifying that you can run your code interactively (i.e. run your RT code directly from the host computer)
    3. Writing a very simple myRIO application that toggles a user LED. This will allow you to visually see whether or not the application is running.
    'NI Community: Toggle User LED on cRIO Target'
    https://decibel.ni.com/content/docs/DOC-29852
    ~ Q ~
     

  • Hold switch not functional?

    I cannot anymore turn on the hold switch of my 5th gen. iPod: the lock symbol does not appear on the screen even though the switch slides to the lock position. The device is neither locked: I can use it as normal even though it should be locked. Is this a hardware or software failure? Resetting does not change anything.

    Hello Tuomas,
    If no luck on the Reset, have tried restoring it via iTunes? Keep in mind that restoring the iPod will erase all the content from the iPod and set it back to its original default settings.
    [Restoring iPod to factory settings|http://support.apple.com/kb/HT1339]
    If restoring the iPod has no effect, then the problem is more likely a hardware issue with the hold switch itself and will need to be serviced and replaced.
    B-rock

  • Wifi problem, switch not responding

    wifi switch not responding

    Hello,
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • Hold Switch Not Holding

    I always use the hold switch on my 5G iPod. I usually use the iPod in school and use the stock cloth case that it came with. This works fantastically, but recently, the hold switch is still on HOLD, but if anything rubs against the touchpad, it wakes up for a split second and turns on the backlight until the 5 second cooldown.
    This is very annoying and it happens quite often. It drains the battery within the first 2-3 hours of music play. I like the backlight and it is obviously some kind of defect, so I shouldnt have to just "turn off the backlight" or something else for a fix. I have only had this a few months now.
    Has anyone ever experienced this? I searched the forums and didnt see any threads relating to this topic.
    I will probably go to the apple store, but it is a fairly long way away from where I live, so I was hoping someone may have a suggestion on the forums.
    Thanks,
    Dan

    Anyone?

  • Hold Switch On and Off not working - Always ON

    Hi,
    I am having a serious problem with Hold Switch which is all the times in ON condition though I am moving right and left. None of the buttons are working because its in Locked state. Hold switch is not working. Is it a product related issue where in I need to go to store or is there any way to make it work.

    Well it used to be that the iPods were not all that hard to open, especially with some simple plastic opening tools. However the new Classic line feature a brand new case design that to the best of my knowledge, no one has figured out how to open without breaking the case pieces. This is why if you look at many of the third parts battery sellings and iPod repair places, none are yet selling replacement batteries due to the inability to get into the ipod without ruining the case.
    That said, if you do have a Classic, then it is obviously still under warranty since it just came out. Therefore, I would hit up your local Apple store or send it in if you don't have one near by. The hold switch not working is a warranty issue that they should cover.
    Patrick

  • Power off button not responding

    Power off switch not responding... Help!

    Try to reset the device (try it even though as you said the power button (or sleep/wake switch) is not functioning)
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.
    If the switch is indeed physically bad, you can get by in the meantime (or until you can get it evaluated/fixed) by using the the AssistiveTouch panel (this floats a virtual button on the screen that you can use to access various funtions of the iPad, one of them being the sleep/wake switch). I use this all the time, even though my buttons are just fine (cuts down on wear/tear on the physical buttons).
    AssitiveTouch: Settings>General>Accessibility>AssistiveTouch (set to ON)

  • Apple iPAD 2.  Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment.  Can you help please?

    Apple iPAD 2.  Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment.  Can you help please?

    Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.  See if that clears the glitch.

  • TS1702 Upon switching on my ipad, I'm getting the caption "Unable to Download Application "*Solitaire" could not be downloaded at this time." Further, I'm getting 2 options - Done & Retry, both of which are not responding. The ipad is in the hanged situat

    Upon switching on my ipad, I'm getting the caption "Unable to Download Application "*Solitaire" could not be downloaded at this time." Further, I'm getting 2 options - Done & Retry, both of which are not responding. The ipad is in the hanged situation for all practical purposes. How do I get out of this situation?

    Try a reset:
    1. Hold the Sleep and Home button down (together)
    2. For about 10 seconds
    3. Until you see the Apple logo (very important)
    4. Ignore the red slider

  • HT201270 My ipad is displaying the carrier settings update box but does not respond to either the "update now" button or the "not now" button and has totally frozen. The ipad cannot switch off as I need to clear this box before I can "slide to shut down".

    Can anyone help me with carrier settings??? My ipad is displaying the carrier settings update box but will not respond when I press "update" or "not now". I have tried to switch the ipad off, but cannot "slide to shut down" as I need to clear the carrier settings box first!! HELP PLEASE!!!!

    Have you tried a reboot? Hold down the power and home buttons simultaneously. Ignore the Slide to Power Off prompt if it pops up. The display should go dark, and the Apple logo should appear as it begins a reboot. This is a soft reboot - it does not erase data.

  • On switching on, a message says 'Firefox is already running but not responding...........' then tells me to close it and restart but how can I close it when the page isn't yet displayed?

    When I switch on my computer I get the desktop then I try to click on Mozilla Firefox but get the message, 'Firefox is already running but not responding. To open a new window you must first close the existing Firefox process or resart your system.' I looked up how to close but I need to click on 'file' then 'exit'. How can I do that when I can't see the page yet? IE is working fine.

    See also [[Firefox is already running but is not responding]]

  • While playing a game my iphone went completely frozen, it does not respond to any input, not even to holding down the on/off hey. Any ideas?

    While playing a game my iphone went completely frozen, it does not respond to any input, not even to holding down the on/off hey. Any ideas?

    Try a reset. That is holding the sleep/wake and home button together until you see the Apple logo and release. That will reset the iPhone, but will not affect your data.
    Thanks! It worked just fine!
    MRP66

  • Safari - "web pages not responding" about once an hour. I'm about to switch to Chrome if I can't fix this.

    Safari - "web pages not responding" about once an hour. I'm about to switch to Chrome if I can't fix this. Help?

    Regarding #1, your post says you have a beta version of Firefox 4. That may well be incorrect, but that is why the site says you do not have the latest version.
    Losing graphics on the bookmarks toolbar and not having a working back button are not normal, but I'm not sure whether you want to troubleshoot Firefox 4, roll back to Firefox 3.6, or just move on.
    How can we help?

  • Keynote Crashing - with Lion.   Most often when I switch out of Keynote to another program - Keynote freezes - says Application Not Responding.  If I save the Keynote before switching, it does not crash - only when it says it is an "edited" file....help

    Keynote Crashing - with Lion.   Most often when I switch out of Keynote to another program - Keynote freezes - says Application Not Responding.  If I save the Keynote before switching, it does not crash - only when it says it is an "edited" file....help

    I posted this on another thread. See if this works:
    1) Uncheck "Backup previous version" in Keynote's Preferences.
    2) Make a duplicate copy of your file that has issues and save it.
    3) If you still get spinning wheels from switching between apps after editing or 10 seconds of inactivity, manually save with command+s. It may beach ball here but be patient and wait for it to finish! Try editing and resume doing work now.
    Command+s may be a bit slow but I think that might be normal since the files are so big.
    Good luck and let me know if this works.

Maybe you are looking for