Holding command changes auto-select

When I just downloaded the newest version of Photoshop CC and now when I hold "Command" it changes my Auto-Select from "Layer" to "Group", can anyone help me?

so its not just me... Re: PS CC 2014 Move Tool Bug?

Similar Messages

  • Toggle Auto Select?

    The Auto Select Layer/Group feature of the move tool can be really handy when you have a ton of layers. But it also drives me crazy when I forget to turn it off!
    Is there a hotkey to toggle it off and on? Ideally, I'd like to press-and-hold to turn Auto Select on, but once the key is released, it would turn off.

    So simple! Will be a huge time saver. Thank you!

  • Move Tool: Toggle auto select shortcut changed

    The changed shortcuts to toggle the autoselection of layers with the move tool selected is highly frustrating to me. I used to have a great workflow with auto select turned on and used cmd to drag elements that were either off-canvas or too small / too transparent to grab them.
    I used to have good time moving layers with Command hold, now holding Cmd toggles Layer/Group selection
    How can I change it to previous behaviour?

    Before:
    You really only needed to uncheck Auto-select when you wanted to use the layser stack to make your selection on what to move. This could be useful, especially if you had lots overlapping layers but in most web-design workflows was rather an exception than the rule.
    Holding down CTRL while in another tool, such as the Brush or Selection Rectangle or Lasso temporarily enabled the Move-Tool in whatever mode you had last set it when in the tool. That is similar in behaviour displayed by the color picker tool, which has several different picker modes that can be set with the tool active and that are applied when the temporary picker is used (by pressing ALT while using most tools that deals with pixel manipulation like the Brush and Pencil Tool ).
    Now:
    In Move Tool, Auto-Select Checked
    Holding Down CTRL will switch selection mode from Layer to Group and vice versa.
    In Move Tool, Auto-Select Unchecked
    Holding Down CTRL will toggle Auto-Select On and Off
    Releasing CTRL will revert to non-Auto-Select-Mode where you can move stuff around regardless on where you click in the workspace. So basically this is like it was before, only inverted.
    And here comes the catch, these are all possible scenariosthat can occur with the Move-Tools settings:
    Outside Move-Tool, Auto-Select Checked, Layer-Selection Mode active
    CTRL will still activate the Move-Tool, but it will invoke the Group-Selection
    Outside Move-Tool, Auto-Select Checked, Group-Selection Mode active
    CTRL will activate the Move-Tool and will invoke the Layer-Selection. This feels as it was before.
    Outside Move-Tool, Auto-Select Unchecked, Layer-Selection Mode active
    will activate the Move-Tool and will invoke the Layer-Selection.
    Outside Move-Tool, Auto-Select Unchecked, Group-Selection Mode active
    will activate the Move-Tool and will invoke the Layer-Selection.
    And this interrelation of behaviours is, what causes the problem. You need different settings for the Move-Tool to get the same action out of the temporary Move-Tool that you would get from the ragular Move-Tool.
    I see what they were shooting for with this change. The new functionality is not unusable, but it has flaws that interrupt a workflow that many users rely on.
    A compromise might be reached, by assigning the Layer/Group Toggle to another Function-Key combination like CTRL+ALT.
    In the meantime, please do as you promised: roll back this change and re-introduce it, once the flaws have been ironed out. If I remember correctly, one of the often mentioned advantages of the Creative Cloud-model was the rapidity of updates. It is now up to you to make good on that claim. Please do.

  • Safari shortcuts: How to change "Command-1" to select previous tab

    Hey all,
    Trying to customize my Safari shortcuts but having trouble changing "select previous/next tab" shortcuts to "Command-1/2" as I would prefer them to be. Even after changing them in the preferences the "Command-1" just opens the first link on my bookmarks bar (and Comman-2 the second respectively).
    The question is: How to change the "select previous/next tab" shortcuts to Command-1 and Command-2? I bet many people would prefer this to the standard shortcuts...
    Cheers!

    You really don't want to change shortcuts within the system. This could mess things up.
    Some Programs allow you to change shortcuts within that program. In the notes for changing short cut they do state that changing short cuts could have conflicts with System shortcuts.
    I would advise not to mess with changing any shortcuts.
    Message was edited by: David M Brewer

  • Auto select not working with tethered shooting

    Hi,
    I'm shooting images in a studio tethered, and up until yesterday it was working like a dream. I take a picture and it shows up on my mac... but now it's stopped working. The images capture ok, but the viewer doesnt show the most current picture.
    I've checked that 'auto select' is ticked/checked on the HUD... and havent changed anything on my set up... so I'm hoping someone has an idea what it might be.
    I'm working with the latest version of Aperture 3 on Lion with a Canon 5D
    Any help greatly welcomed
    Jack

    When I thether It will work fine till the end of the day and I then I have to reboot.  Once I reboot the images are captured and advance properly.  So I suggest rebooting the machine.  If it doesnt work normally at the start Id do the trouble shooting steps in
    Aperture 3: Troubleshooting Basics
    re boot in safe mode then ...
    Start AP  while holding the option key and repair permissions
    delete the user AP preferencs
    use disk utlilties to repair permissions
    use Single user mode to type in th fsck  command  (look it up first)
    Its alot  but it covers alot also

  • Move Tool Auto-Select Group/Layer Toggle?

    Hi:
    I regularly use the Move Tool's Options palette Auto-Select Group functionality. I've not been able to find any reference to a keyboard shortcut for being able to temporarily toggle from auto-selecting Group to Layer. It seems to me that it would be a useful shortcut.
    As it is, the user must select "Layer" in the drop-down menu in the Options palette. It would be much quicker if a keyboard shortcut enabled this toggling.
    I've noticed thatwhile the Auto-Select option is set to Groupyou can hold the command key and right-click a layer (with the Move cursor) within a group and it will be selected in the Layer panel. At this point, you can move the selected layer using the arrow keys, but not with the Move cursor. It would be really slick if the Move tool cooperated and allowed moving the selected layer.
    Is there some shortcut or technique I'm missing that would approximate this functionality?
    -john

    You f#*kers have to take into consideration all use cases! A lot of people work with auto-select. How can you just change certain functionalities like this!
    This wasn't a problem in older CS4/ 5. This has a direct impact on my productivity! 
    Please fix this **** ASAP! I paid a butt load of money to get CC license so it can help me improve & work more efficiently not to deal with such ****** issues.

  • Auto-select clip under playhead? (for color correction)

    Hi all
    Another newbie question concerning color correction in FCS2.
    When moving from clip to clip in the timeline, the viewer (which contains the 3-way color correction filter) doesn't refresh until I remember to double-click on the current clip to select it. In other words, if I change a filter on one clip, then move in the timeline to the next clip, the viewer still contains the previous clip's filter, and if I forget, I'll start fiddling with it, thinking I'm now looking at the current clip.
    Still with me?
    So, my question is, is there an "auto-select" feature whereby, as I move my playhead along the timeline, clips on a selected track (eg V1) will automatically get selected and loaded into the viewer?
    I know there is an auto-select feature for tracks, which I've enabled for my video track, but it doesn't seem to be meant for what I want.
    Thanks!
    Matt

    If you set the SYNC to OPEN, what is being played in the time line (and displayed in the Canvas view) will also be displayed in the Viewer.
    Just a point of clarification - the Viewer doesn't hold the CC filter, it will only display the filters that have already been applied to currently displayed clip. If the next clip displayed in the viewer has not had the 3way CC applied, the 3way CC won't display as part of the filters on that clip.
    Good luck,
    x

  • How to vertical select a text in iWord.  Like we do in Mac version of MS Word by Command Option [and selecting]

    How to vertical select a text in iWord.  Like we do in Mac version of MS Word by Command Option [and selecting]

    m0thr4 wrote:
    I want to make sure all text in my document is a particular font (at least), but Cmd+a only selects any text that is not in a table. There seems to be no way to include text in tables, or even a way to change the format of all text in a particular table (MS Word allows the whole table to be highlighted for example).
    A double click in a cell selects it so you may enter what you wish in it.
    Select the cell A1 then, pressing the shift key, click in the right-bottom cell.
    Doing that you will get every table's cells selected which gives the ability to apply global attributes.
    I've searched the built-in help and found "To select all text in a document, choose Edit > Select All." This does not work as tables are excluded from this selection. If tried some of the other suggestions, such as holding down shift while selecting text in tables, but as soon as I get to the end of the text in one cell, the selection disappears.
    My guess is that some words are missing in the Help. Select All selects all the text … of the text layer.
    We must apply the settings to the text layer, to each text box, to each table.
    Of course, you may _Go to "Provide Pages Feedback" in the "Pages" menu_, describe what you wish.
    Then, cross your fingers, and wait _at least_ for iWork'09
    Yvan KOENIG (from FRANCE vendredi 10 octobre 2008 17:16:06)

  • Move tool layer context menu acting differently to "Auto Select"?? (using 12.0.4)

    Okay,
    This is weird. I've just updated my mac photoshop to 12.0.4 and I'm finding that, when using the Move Tool and right/command clicking on an object, the context menu that pops up isn't selecting the right layer?
    To be clear, it is highlighting a layer (this is not the initial Photoshop 12.0 bug that drove everyone mad until the update) but it's the wrong one? Results vary depending on where I'm clicking, sometimes it's "close" to the layer I want, say the group it's nested within, other times it's a million miles off.
    Yet when I switch on "Auto Select" it's pin-point accurate again? It's like the brain has dropped out of my context menu and it doesn't know what to select.
    Obviously I can keep switching "Auto Select" on, but that's an annoying change to my work flow and will slow me down no end. Mores to the point, clearly something is up here.
    I've updated to 12.0.4 on my home imac (on 10.5.8 OSX if that helps) but I've been using 12.0.3 (possibly 12.0.2) in the studio where I work and never noticed this issue, it's just now after updating to 12.0.4 at home i'm noticing this weirdness.
    Anyone have any ideas, I'm at a loss.
    Thanks in advance people,
    G

    To reset the tool I suggest click on it once and then look for something like this in the bottom half of your window:
    In the above picture I have marked one section in red box.  You need to click on it to get the option to either reset the only tool you have clicked or to reset all the tools in the editor window.  Of course you have to be in Expert Mode to get this to work.
    Good luck.

  • Auto select an item in a child node of a TreeView UI control?

    Hi There,
    I'm having some issues with a TreeView control in my UI that I cannot seem to resolve, and thought I would ask if anybody here has done this type of thing.  My TreeView is made up of a collection of nodes, each with some child items.  When the window containing the TreeView displays, I populate it with the nodes.  I want to be able to script the selection within the TreeView, but I want the script to select a child items, not just their parent nodes.  Is this possible?  I know it is possible to selecting the parent nodes in a TreeView, but I cannot seem to get the code for selecting, via scripting, a child item of a node in a TreeView.  Any thoughts on how to acheive this?
    Thanks for your time and help!
    Best,
    Arie
    Here is some of the code I am using for auto-selecting child items of nodes in the TreeView:
                        //Code to populate the TreeView (picker) goes here
                        //Highlight the last selection
                        for (var i=0; i < picker.items.length; i++)
                            if (picker.items[i].title == SAVED_TITLE){
                                picker.selection = picker.items[i];
                                picker.selection.expanded = true;
                                for (var x=0; x < picker.selection.items.length; x++) {
                                    if (picker.selection.items[x].marker == SAVED_MARKER){
                                        picker.selection = picker.selection.items[x];  //turns out the indices are relative to it's parent, not the picker's indices
                                        break;
                                break;

    I had some of the above code wrong:
        // function to filter jsx files------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ -----------------------//
        function filterJSXFiles(file)
            return ((file.name.match(/.jsx(bin)?$/) != null) && (file.name != (new File($.fileName)).name));
        // Collect files in folder that holds Burrow AFX scripts---------------------------------------------------------------------------------- -----------------------------------------------------------------------------//
        var brws_ScriptFolder = "Z:\\apps\\after_effects\\AFX_Scripts\\"; 
        //print(brws_ScriptFolder)
        if (brws_ScriptFolder != null)
             var fileList = Folder(brws_ScriptFolder).getFiles(filterJSXFiles);
             //print( fileList)
            function myScript(thisObj){
            function myScript_BuildUI(thisObj){
                var myPanel = (thisObj instanceof Panel) ? thisObj : new Window("palette", "AFX SCripts", undefined, {resizeable:true});           
                res = "group{orientation:'row', alignment:['fill', 'fill'] , alignChildren:['fill', 'fill'], \
                    groupOne: Group{orientation:'column', alignment:['fill', 'fill'] , alignChildren:['fill', 'fill'], myMultiTreeView: TreeView{}   }     }     }"; // creating a resource string, controls go here
                myPanel.grp = myPanel.add(res);           
                var brws_ScripIconsDir = "Z:\\apps\\after_effects\\burrowsAFX_Script_Icons\\burrowsIconForAFX\\";   
                var jsxExt = ".jsx";
                //Add Treeview items and icons------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ -----//
                var brws_TopNode = myPanel.grp.groupOne.myMultiTreeView.add("node", "Burrows AFX Scripts");
                brws_TopNode.image = File( brws_ScripIconsDir + "BurrowsIcon20x20.png" ); 
                //brws_TopNode.helpTip = "This is the help. Is it not THE greatest thing you have seen?"
                var brws_AsciiGenerator_1_2 = brws_TopNode.add("item", "AsciiGenerator_1_2");     // CURRENTLY THROWS RESOURCE ERROR
                brws_AsciiGenerator_1_2.image = File( brws_ScripIconsDir + "AsciiGenerator_1_2.png");
                // EVENTS----------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------ ---------------------------------//
                myPanel.grp.groupOne.myMultiTreeView.addEventListener('change', function (event)
                         if (myPanel.grp.groupOne.myMultiTreeView.selection.text ===  'AsciiGenerator_1_2') { fn_AsciiGenerator_1_2(); }
                   }, false);// End of Event Listener
                function fn_AsciiGenerator_1_2()
                    var asciiGenLoc = (brws_ScriptFolder + "AsciiGenerator_1_2" + jsxExt);
                    var scr_asciiGenLoc =  new File(asciiGenLoc);
                    if (scr_asciiGenLoc.exists) { scr_asciiGenLoc.open("r"); var scriptContent = scr_asciiGenLoc.read(); scr_asciiGenLoc.close(); eval(scriptContent); }
                    myPanel.grp.groupOne.myMultiTreeView.selection = brws_TopNode;
                //Setup panel sizing----------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------ --------------------//
                myPanel.layout.layout(true);
                myPanel.grp.minimumSize = myPanel.grp.size;
                //Make panel resizeable------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------ ------------------//
                myPanel.layout.resize();
                myPanel.onResizing = myPanel.onResize = function(){this.layout.resize()}           
                return myPanel;            
                }// End of myScript_BuildUI------------------------------------------------------------------------- ------------------------------------------------------------------------------------------ -------------------// 
            // Create the UI--------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------ --------------------------//
            var myScriptPal = myScript_BuildUI (thisObj)
            if( (myScriptPal != null) && (myScriptPal instanceof Window) )
                myScriptPal.center();
                myScriptPal.show();
            }// End of if Statement-------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------ ---------------------//
            }// End of myScript function
    myScript(this);
    }// End of script

  • Auto selection of file from folder during uploading??

    Hi all friends,
    Iam facing with one problem I am developing one uploading software for that i have used swing and servlet.Now my problem is i want to give auto selection of file from one folder means user just copy the files from any computer on network and paste it in predefind folder.And when they click on upload button it should start uploading of file one by one and after completion of uploading it move that file into another folder one by one.Now my software doing it perfectly but if user copy and paste any file in that predifined folder from network computer during uploading then they have to click upload button again after completion of first queue of files(for example if user first copy 10 files and start uploading and inbetween uploading of that 10 files if user copy another 10 files from network computer then they have to click on upload button again after completion of uploading of first 10 files).But my user requirement is they want to click on upload button once only at the time of starting my application and my application automatically select the file one by one from folder and send it to destination.Means if they copy the file from network machine inbetween uploading or any other user from network send file in that folder then my application should select those file automatically and start uploading means they don't want to click on upload button again.Can any one plz guide how I can slove this problem.Below r my codes:-
    Upload.addActionListener(new ActionListener() {
    public void actionPerformed(ActionEvent e) {
    try {
    suspendflag=true;
    Resume.setEnabled(false);
    Suspend.setEnabled(false);
    dest=frame.m_txtURL.getText();
    File ff=new File("d:\\DTMS\\Upload");
    File[] files = ff.listFiles();
    fileList = new Vector();
    if(files == null)
    textArea.append("There is no file");
    return;
    else
    for (int j = 0 ; j< files.length ; j++)
    fileList.add(files[j]);
    java.util.Collections.sort(fileList, new FileComp());//sorting by size
    new Thread(new Runnable() {
    public void run(){
    for (int k = 0; k < fileList.size(); k++)//loop for queue {
    File fname = (File)fileList.get(k);
    String str=fname.getName();
    log("Destination:" +" "+ dest);
    log("Uploading Progress\nPlease Wait....");
    result=doPost(fname,dest);//method for read file & send to servlet
    String str2="Transfer apparently failed.";
    String str3=result;
    if(str2.equals(str3)){
    Error(result);
    else if(suspendflag==true){
    File newfile =new File("d:\\DTMS\\Archives\\"+str);
    fname.renameTo(newfile);
    log("File" +" "+ str+" "+"Upload Completed !");
    else if(suspendflag==false){
    Error("** Transfer Suspended**");
    }).start();
    }catch(Exception exp)
    Error("Error : " + exp.toString());
    Regards
    Bikash

    Hi Chandan,
                        All the multiselection files are stored in it_tab( i:e file_table in method). you need to loop the every record to upload the data for selected files. please check the code Below...
    DATA: file_str1 type string.
    data: it_tab TYPE STANDARD TABLE OF file_table,
           wa_tab TYPE file_table,
           lw_file LIKE LINE OF it_tab,
           gd_subrc TYPE i.
    SELECTION-SCREEN begin of block blk with frame title text-100.
    SELECTION-SCREEN SKIP 2.
    parameters : p_file like rlgrap-filename .
    SELECTION-SCREEN end of block blk.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
    window_title = 'Select only Text File'
    default_filename = '.azt'
    multiselection = 'X'
    CHANGING
    file_table = it_tab
    rc = gd_subrc.
    *READ TABLE it_tab INTO lw_file INDEX 1.
    *p_file = lw_file-FILENAME.
    Start-of-Selection.
    loop at it_tab INTO wa_tab.
       file_str1 = wa_tab-FILENAME.
    CALL FUNCTION 'GUI_UPLOAD'
       EXPORTING
         filename                      = file_str1
    *    filename                      = '\\10.10.1.92\Volume_1\_projekte\Zeiterfassung-SAP\test.azt'
       tables
         data_tab                      = it_string
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDLOOP.

  • I can't seem to open (view) my photos.  I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info."

    I can't seem to open (view) my photos.  I get an error message that says "the file couldn't be opened because you don't have permission to view it. To view or change permission, select the item in the finder and choose File. Get info."  I have never had this happen before?  Thanks!

    Try the following:
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - Run Option #1, Repair Permissions.
    OT

  • I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, now what??

    I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???

    This sorted it for me:
    Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
    To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up.

  • File name should change by selecting the radio buttons

    Hi all,
    PARAMETERs: p_file LIKE rlgrap-filename.
    PARAMETERS: p_app RADIOBUTTON GROUP rg DEFAULT 'X',
                             p_pre RADIOBUTTON GROUP rg.
    this is to download the ITAB data to presentation and application servers depending upon the radio button selected.
    if i select p_pre , then default download path is : 'C:/ download.txt'.
    if i select P_app , default download path is : '\usr\sap\EBG\SYS\profile\DOWN.TXT'.
    how the file name should change by selecting the radio buttons ?
    Thanks
    KR

    Hi,
    DATA: c_x VALUE 'X'.
    selection-screen begin of block input with frame title text-000.
    parameters :desktop     radiobutton group rg_f user-command rg_f,
                       in_file type ibipparms-path modif id ps DEFAULT 'C:/ download.txt',
                menu     radiobutton group rg_f ,
                       sys_file type ibipparms-path modif id as default  '\usr\sap\EBG\SYS\profile\DOWN.TXT' .
    selection-screen end of block input.
    at selection-screen output.
      if desktop is initial and menu is initial.
        desktop = c_x.
      endif.
      perform f_toggle_finputs.
    form f_toggle_finputs.
    loop at screen.
        if screen-group1 = 'PS'.
          if desktop = c_x.
            screen-input    = 1.
    *         sys_file = c_server_path.
          else.
            screen-input    = 0.
          endif.
        endif.
        if screen-group1 = 'AS'.
          if menu = c_x.
            screen-input    = 1.
    *        clear: in_file.
          else.
            screen-input    = 0.
          endif.
        endif.
        modify screen.
      endloop.
    endform. "f_toggle_finputs
    Hope this helps u.
    Thanks.

  • Changing the selection screen based on the option in list box option

    Hi Experts,
    I have a list box parameter in my selection screen,
    i have four options and i am changing my selection screen based the option selected.
    see my code below,
    at selection-screen output.
      GS_VRM_VALUES-KEY = '1'.
      GS_VRM_VALUES-TEXT = TEXT-S02.
      APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
      GS_VRM_VALUES-KEY = '2'.
      GS_VRM_VALUES-TEXT = TEXT-S03.
      APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
      GS_VRM_VALUES-KEY = '3'.
      GS_VRM_VALUES-TEXT = TEXT-S04.
      APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
      GS_VRM_VALUES-KEY = '4'.
      GS_VRM_VALUES-TEXT = TEXT-S05.
      APPEND GS_VRM_VALUES TO GT_VRM_VALUES.
      CLEAR: GS_VRM_VALUES.
      CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          ID                    = 'P_DROP'
          VALUES                = GT_VRM_VALUES
      EXCEPTIONS
        ID_ILLEGAL_NAME       = 1
        OTHERS                = 2
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    LOOP AT SCREEN .
        CASE P_DROP .
          WHEN '1'.
            IF SCREEN-GROUP1 = 'M2' OR
              SCREEN-GROUP1 = 'M3' OR SCREEN-GROUP1 = 'M4'.
              SCREEN-INPUT = 0.
             SCREEN-ACTIVE = 0.
              screen-invisible = 1.
              MODIFY SCREEN.
            ENDIF.
          WHEN '2'.
            IF SCREEN-GROUP1 = 'M3' OR SCREEN-GROUP1 = 'M4'.
              SCREEN-INPUT = 0.
             SCREEN-ACTIVE = 0.
              screen-invisible = 1.
              MODIFY SCREEN.
            ENDIF.
          WHEN '3'.
            IF SCREEN-GROUP1 = 'M2' OR
                SCREEN-GROUP1 = 'M4' .
              SCREEN-INPUT = 0.
             SCREEN-ACTIVE = 0.
              screen-invisible = 1.
              MODIFY SCREEN.
            ENDIF.
          WHEN '4'.
            IF SCREEN-GROUP1 = 'M2' OR
            SCREEN-GROUP1 = 'M3'.
              SCREEN-INPUT = 0.
             SCREEN-ACTIVE = 0.
              screen-invisible = 1.
              MODIFY SCREEN.
            ENDIF.
          WHEN OTHERS.
            IF SCREEN-GROUP1 = 'M2' OR
               SCREEN-GROUP1 = 'M3' OR SCREEN-GROUP1 = 'M4'.
              SCREEN-INPUT = 0.
             SCREEN-ACTIVE = 0.
          screen-invisible = 1.
              MODIFY SCREEN.
            ENDIF.
        ENDCASE.
      ENDLOOP.
    my problem is when i change the option in the list box, the particular modify group ie, the screen is getting changed only after i press enter, So please suggest me how i can change the screen without pressing enter.

    Hi,
    without using VRM_SET_VALUES...you just create one data element by going se11....create one domain for it...now give the values in the "value range" tab....and at the time of declaration just write ..
    PARAMETERS var1 TYPE <your created data element>
                        AS LISTBOX VISIBLE LENGTH 20
                        USER-COMMAND onli
                        DEFAULT <one value>.
    You will get the same effect as list box....and make it mandatory..
    Arunima

Maybe you are looking for