Holding final note in a song in Final Cut Express

I need to hold the last note in a song for a video project. Any ideas?

Hi(Bonjour)!
Use the selection tool to shorten the audio file in timeline to a point where the note is sustained.
Double-click the original audio clip from browser to open the it in viewer and set a IN and OUT point that play just the final note (the portion where the sustained part start and end). Drag this short clip just after the OUT point of the audio clip in timeline. Put as many occurence as needed to play the sustained portion as long as you want.
Michel Boissonneault

Similar Messages

  • No refresh displaying iTunes song in Final Cut Pro X anymore?

    Not sure what is going on, but when I display iTunes songs in Final Cut they do not refresh when changing from folder to folder. I dont see that problem with other Apps like Garageband, iLife Sound Effects or Final Cut Pro Sound Effects, only when trying to search for songs I know exists in any of my iTunes library folders or playlists.
    Im sure it has to be a problem but uncertain when it started. For example, if I am looking at the content of "Impacts & Crashes" from Final Cut Pro Sound Effects, and then select to see any of y iTunes playlists/folders I still get displayed the previous "Impacts & Crashes" content from Final Cut. The only way I can see iTunes content is if I select the main iTunes parent, there I see my whole library. But again, I can't narrow down to any of my playlists or folders.
    Was this funcionality removed or is it a bug? Am I the only one with this thing going on? How can I fix it?
    Thanks for any help.

    Ahh, figured it out - for you folks that notice the same error...
    If you have iTunes in an external drive (like I do) probably the drive is sleeping. Wake it up (I doouble clicked my drive to access it). After that your iTunes lib might be accessed from Final Cut. Suppose this applies to anything else trying to import from an externally fed iTunes library.

  • Imported song "skips" when using final cut express.  please help!!!

    hey everybody. i'm editing a music video in final cut express 4.0. i'm very new to this, so please forgive me for using incorrect terminology, or in most cases, no terminology. here we go...
    i'm having this problem where the song i imported into fce keeps, for lack of a better word, skipping. the song is an mp3 file. the song plays all the way through, and it doesn't stop when it skips. but every so often, there will be this glitch, where you can hear the music screw up. when played in itunes or on a cd, this song plays fine, so it's not the mp3. what gives?
    i thought it might be related to the audio from my video tracks. at first, i was just bringing the audio levels from the video all the way down. but then i decided to try erasing it to see if that would help. it didn't.
    thank you so much for reading and taking the time to share your valuable knowledge! take care, everyone.

    http://www.fcpbook.com/Audio1.html

  • Importing iTunes songs into Final Cut

    Because the file is locked, I can't open a song with Final Cut Express. That's the whole reason I bought the song, now I can't use it! Any advice out there?

    See if you can upgrade the track to iTunes Plus, which is of high quality and, more importantly, has no copy protection. Sign into the iTunes Store and click the Upgrade to iTunes Plus link under the Quick Links at the upper-right.
    Note that even without copy protection, the tracks from the iTunes Store are still licensed only for your personal use and cannot be used in any movie project that you intend to give away or post/play in any public venue.

  • Production order status was not changed to 'CNF' after final confirmation.

    Hi guru.
    I experienced very special case that production order status was not changed to CNF after final confirmation.
    I did final confirmation and canceled confirmation. (CNF -> REL)
    And I did final confirmation again because of fixing activity quantity.
    the strange thing is that production order status wasn't changed from REL to CNF.
    I did  confirmation again with 0 activity, thereby  I solved this problem
    BUT i don't know why this case happened.
    Please, explain the reason.
    Thanks.

    Hi,
    As per my observation, their is not any change in the status of the order REL with confirmation CNF, instead of this, it has change from CRTD & then to TECO.
       Sequence of the status of the order as below
    1) CRTD MANC NMAT SETC
    2) REL  NMAT SETC - Changes from CRTD to REL after releasing of the order
    3) REL  CNF  PRC  CSER ERTR OPGN SETC -  After confirmation, it updated after the order REL status.
    Rgd,
    Chetan

  • I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please?

    I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please, by the way the "L" doesn't appear in the bottom left hand corner either? and by the way how can I get rid of that irritating Blue badge saying "AutoFill your contact details" all mine are in "address book" already!

    You can't drag a transition into the canvas. If you're dragginmg a transition from the effects tab you drag it between the edit point of two clips in the timeline.
    Make sure show edit overlays is turned on in the Canvas view popup.

  • Final Cut Express not able to run on new MBP

    I purchased my 2.4 GHZ 2GB RAM MBP in late March. Today I installed my previously purchased Final Cut Express 2. When I launched the application, the following error message came up and did not allow me to run the program:
    Configuration error
    The software requires certain hardware or software which is missing.
    - AGP graphics card
    All of the MBPs in the Apple store had FCE loaded on them and I was pretty clear to the salesman that I would be using this software (FCE) on the MBP. Any help would be greatly appreciated. Thank you in advance.

    How old is the FCE? FCE had to be rewritten to work on the Intel Macs. I had to update versions that ran on G4 macs because they would not run on G5 versions. If this is a newer version of FCE that runs on Intel Macs, then I do not have a suggestion for you.

  • Made a 2 minute edit on Final Cut Express but at the 30 seconds (after I exported), there's a clip showing up that is not in my project, a clip i don't want in there, a glitch, how can I correct this problem? I don't want to start over again :(

    Basically, I have 2 problems:
    1) When I export it shows this clip that's not in my normal project and it ruins my project by having this clip in there; it's like a glitch. I tried to change the clip, and and still doesn't make the project normal again. Tried a new sequence and dragging the project into HD Mode and to no avail.
    My camera:
    HD: 1080p
    Settings: At Hd
    2)
    Also, it's only displaying black bars above my project, even after exporting at 720p. I just don't want this random clip in my project or the black bars. I'm using Final Cut Express. Does anyone have any possible idea what this could be? Any help woud be much appreciated! I'm clueless on this.
    IS ANYBODY OUT THERE?  : )

    1) Is it a video clip? Something you recognize?  To be clear, it's displaying at a point in your exported movie but doesn't appear at all in the sequence?
    2) What are your sequence settings?  Right-click your sequence and choose "Item Properties" to verify.

  • My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5.  I now have Maverick ISO and it will not let me load my software so I can continue my film work. ???

    My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5.  I now have Maverick ISO and it will not let me load my software so I can continue my film work. How do I get it too recover it without paying for it again since I paid for it already and have projects in progress that need to be completed?

    1) Partition your hard drive or add an external drive and install Snow Leopard (with the Optional Rosetta) into it and then you can dual-boot (System Preferences:Startup Disk) into Snow Leopard and run FCE 3.5 there.
    2)  Use one of the following methods to install FCE 3.5 into Mavericks:
    a)  Pacifist:  http://www.charlessoft.com/
    b)  Jeremy Johnstone's Terminal method:  http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html
    Reports on this forum seem to confirm that Final Cut Studio 2 will continue to operate in Mavericks once it is functionally installed, albeit some plug-ins may fail to function.  FCE 3.5 is the same generation as FCS2, and presumably will continue to operate in Mavericks, as well.

  • Canon GL2 is not recognized by Final Cut Express

    I am trying to capture from my Canon GL2. I hook up the fire wire but neither I-Movie or Final Cut Express seem to recognize the connection.
    Any Suggestions?

    Hi
    My general list on this.
    *NO CAMERA or A/D-box*
    Cable
    • Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
    • Test another FW-Cable *very often the problem maker*.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toogle in iMovie pref. Play-back via Camera (on<->off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    • Camera connected to "charger" (mains adaptor) - not just on battery
    • Camera set in Playback mode - NOT Recording mode
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    A/D-box
    • Is the dip-switches set right ?
    • Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
    • Try resetting it
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    • FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited.
    • Does Your Mac have a FireWire Port
    • White MacBooks - don't
    • MacBook-Air - don't
    if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
    else - NO SOLUTION
    Only option as I get it is either
    • Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
    • Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
    • If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
    You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
    has one and this FW-Card-port works greatly.
    SoftWare
    • Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    • Screen Saver - OFF
    • Energy Saver - OFF
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie’08 (7.1.?), 09 or 11 ?
    • iMovie HD 6 (6.0.4/3) ?
    *Other ways to import Your miniDV tape*
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choise / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    *No Camera or bad import*
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that halps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
    MaryBoog wrote
    Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
    //support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
    What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
    Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
    Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
    Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
    This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
    Yours Bengt W

  • Final Cut Express not opening, error says final FCE disks are missing.

    Hi there,
    Recently I got a WD Fire Wire 800 Hard drive for christmas so I could move all of my final cut projects over to the HD.
    When I moved my final cut express documents including all of the folders it now says this error.
    To preserve the integrity of the data used by final cut express, it is necessary to ensure the existence of the following paths;
    - My HDD Chris is missing
    Then it gives me the option to reset scratch disks, check again or quit.
    So I'm not sure what I do.
    Should I simply move back all the folders and documents that I moved to my hard drive (btw I tried this but it still gave the same error message). I have deleted final cut express 4.1 and re installed 4.0 to see if it works but it didn't and has the same error message.
    Any tips would be helpful.
    Chees, Chris.

    Tom Wolsky wrote:
    I can't even open FCE any more because I have moved everything onto the external hard drive including software 'everything'.
    You moved the software? You can't do that. That's fatal. The software must be on the system drive as it requires system resources. Move the application called Final Cut Express back into the top level of the Applications folder. Do it move it, rename it, or put it inside a folder.
    Do not assign the scratch disk to a folder anywhere. If you want the scratch disk to be on your external drive select the top level of the external drive. FCE will create the folders it needs in that location.
    Hi,
    When you say move the application final cut express into the application folder.
    Do you mean move my folder of final cut express that I moved onto my HDD?
    If so it's copying the 20GB folder as I speak. Hopefully fixes this frustrating problem..
    Cheers, Chris.

  • I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

    I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

    Hello Karen,
    If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders.  Look especially for the AVCHD logo and specific mention of AVCHD in the specs.  Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
    Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
    Most everything you are going to find on the market today is HD, which stands for "high-def".
    Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

  • Capturing Flip Video to Final Cut Express Will not launch Flip Video

    I have done this many times before. I am using Final Cut Express and I am plugging my Flip Video camera into my MacBook Pro and the Flip Video software does not launch. It does not seem to be the
    Flip Video software that is the problem. I have upgraded the Flip Video software. The prompt I get says Flip Video quit unexpectely. I have no idea what is going on. I get a huge log of computer terms which I do not understand. Any ideas? Wish I knew more.
    Here is a screen shot of what I am getting after I attempt to open Flip Video Share Capture etc./Users/Tim/Desktop/Screen shot 2010-08-04 at 11.36.11 PM.png
    Message was edited by: dubdroid 1

    The problem is with your Flip Video software. It is launching but then crashing - that's what the message means:
    The prompt I get says Flip Video quit unexpectely.
    "Quit Unexpectedly" is a nice way to say "Crashed".
    You could try trash the Flip Software.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards.)
    *What's the plist file?*
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
    If that doesn't help you need to contact the makers of the Flip software.
    Regards
    TD

  • Final Cut Express Log and Transfer files not playing audio on another mac

    I recently purchased a new Mac Pro for video editing for work, and am having some issues with it. Previously i was working on a MacBook Pro running OS 10.4.11, on Final Cut Express 4.
    I used Log & Transfer to get the AVCHD videos from my Canon HF 11 onto my mac, and had no issues. Where my problems started was when I moved my video files to my new Mac Pro running OS 10.5.6. Now when I open those video files in either Quicktime or FCE, the VIDEO plays but _not the audio_. I thought maybe the video files were bad, but when I tried the original files on the new Mac, they still didn't work. I don't know if there's some codec that isn't on the new mac or if there's some other problem... I just know that my new amazing machine cannot play the files that my 3 year old one can. I'm not new to computers, but I'm not an Apple guru. Any help would be greatly appreciated!

    Well I can try trashing the files, but I can't log and transfer the files again, as it's months of footage that aren't on the camera anymore. But i did find something else out. The files that were recorded with the camera's built-in mic recording is fine and with sound, but the files that I used my wireless mic setup had no sound. I don't know why that is, because they worked fine on the MacBook Pro. I tried log and transferring a new clip on the Mac Pro wit;h footage using the wireless mic, and still no sound.

  • I edit movies onMac OS X using Final Cut Express and down load to desk top in .mov format. How do I load finished movie to i pad 2? i tunes will not transfer it.

    I edit movies onMac OS X using Final Cut Express and down load to desk top in .mov format. How do I load finished movie to i pad 2? i tunes will not transfer it. Thanks, stevefromnorthfreo

    Try outputting it as a MP4 or M4V
    If Final Cut won't output it, Mpegstreamclip will convert it. So will Quicktime if you have the pro version.

Maybe you are looking for