Holding home key to quit back ground programs

With 2.1 we could hold the home key within a program and completely stop the program. How do we do that we 3.0 as the home key has different functions now?

hold the power/sleep button for a few seconds till the red power off slider appears then hold the home button for a few seconds and then hey presto back to your home screen with the offending app stopped!

Similar Messages

  • My iphone 3gs ran out of power, now wehn plugged in it will not restart, tried plugging in with different chargers, holding home key and other one but nothing works, screen is either battery icon or Apple iconn

    my iphone 3gs ran out of power, now wehn plugged in it will not restart, tried plugging in with different chargers, holding home key and other one but nothing works, screen is either battery icon or Apple iconn

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • I have an ipad wi-fi cellular 32gb. Died in march after 3 month has been replaced now the replacement has died, holding home key and button on top doesnt work at all,  not even if left over night and the next day and night, still nothing.

    I was given a ipad after xmas 2012. Within a month it was freezing up and returned to apple to replace. It was sent straight back to me saying it was fine. The day I got it back it was faulty again only this time it was worse, it was switching itself off and turning itself back on when it liked. A back up and restore was completed AGAIN. 3 weeks later it was sent straight back to apple to be replaced, this time a higher authority from apple in brisbane said it was to be replaced immediately. Which it was. Then within 6 weeks this ipad the replacemetn ipad has started having issues by turing itself off. Now it has completely shut itself down and off. Charge was at 81%. I put it on charge as maybe the %% was wrong. A few hours later, tried turning it on by holding top button, nothing happened  I have also held down top button and home key for 10 sec, nothing so I tried longer nothing happened. Rang apple support and they have suggested holding top button down for 10 sec then add home key for 10 sec both top button and home for 10 sec then they top button off followed by leaving home key for 10 sec by itself. This did not work. I have tried this again this morning and again at lunch at work and again now tonight. Still nothing at all. Even plugging it into the computer doesn't do anything at all. Has anyone else come across this at all with two ipads doing exactly the same thing. My power points are fine, I've had an electrician check them and my computer is fine aswell. I stumped as to what can be going wrong. Thanks

    Is your battery dead or alive?
    If the battery is dead, we must find out if it is:
    1. Charger problem
    2. Cable problem
    3. Docking port problem
    4. Wall socket problem

  • Back Ground programs

    Dear All,
    i want all PP related Programs which will be run in Background for various Purposes in SM36/SM37
    example background  MRP, back ground Prodction orders relese , back ground production order delete etc ....
    Regards
    Madhu Kumar

    Hi,
    If you want to schedule a job for COOIS and COHV, you can use the Program PPIO_ENTRY for various reasons..
    You can schedule the jobs for Release of Orders, TECO, CLSD, availability check and resetting the availabilty data.
    Based on the selection at the entry screen, system will pick the production orders and does the Mass processing activities..
    If you want to know the production Order based on some selection criteria, then you can create speicifi variant and schedule a job..
    If you have a specific query regarding this, we can discuss further..
    The Program for COGI is CORUAFFW - this is display of COGI data only.
    This program will not do anything excent displaying the data..
    There is another program for the same purpose: CORUPROC.
    for eg. if you have goods movemnt errirs in COGI because of stock dficit, then after posting the stock, system will automatically take care of the postings with this program..
    There is another program : CORUAFWP, which is having much more options than CORUPROC.
    For both the programs a detailed documentation is available, check in SE38.
    Best Regards,
    Siva

  • Back ground programs running

    How do I actually close the apps after I am done using them. i have everything open in the back ground running and using up my battery.

    Apps in ios do not run in the background constantly.
    They only run if they are completing a task.
    Once the task is complete they are in a suspended state.

  • Hi apple user. I have lost all iPad safari bookmarks. Tried hold home button with sleep button but it doesn't get back my safari bookmarks. I also have reset without erasing my iPad data but still doesn't work. Help me get back my safari iPad bookmarks.

    Hi, I have lost all iPad safari bookmarks. Have tried reset without erasing data and hold home and sleep button together but when go to safari all safari bookmarks still lost. Is there any case help me get back my iPad safari bookmarks ? Currently my safari is hanged, can't surf webs or anything. I saw the safari tab on iCloud is on, but I don't know using iCloud. Please help me get back my iPad safari bookmarks. I have contact Apple but could not set chat session. I have my Apple ID registered same with iCloud, also same during the time I have all iPad safari bookmarks lost. My iPad never synced on computer since I bought it with set at local store. Please help me get my iPad safari bookmarks back, thanks.

    Hi, I quitted Safari and press and hold the Home and Sleep buttons silmutaneously unti the Ipad turn off and on with the logo Apple appears but it has hanged on and fixed to the point. I do it again hold the Home and Sleep buttons silmutaneously and the Ipad turn off and on again with the Apple logo but it still is hanged on the same point. I have do it a few more time, it still hanged to the same point for few hours with no change (like picture):
    I think my Ipad is fault now. I guess I must connect it to the computer with itune, or something. So my case is this: at the moment everytime I hold the Home and Sleep buttons the Ipad always off and reappear with the Apple logo and be hanged on (like the pic), and I need restoring my Ipad Safari bookmarks... so I guess I need using Itune or something to get back the Ipad then using Icloud or blah. Please guide me for the step, Im not sure if connect to PC, if any that my Ipad data would lost, or is there anyway that I also can get back Ipad Safari Bookmarks after connecting to PC, also the how using Icloud. There is no Apple store or service store in my country so I think I must do it my self. Feel free to share your guide, thanks.

  • How do I stop an app from waiting?  I have tried to reboot by holding the home key and power button to power down.  Also, I have tried to sync the apps from my laptop with no success.  Can you help?  Thanks.

    How do I stop an app from waiting?  I have tried to reboot by holding the home key and power button to power down.  The app is still grayed out and waiting so it cannot be deleted.  Also, I have tried to sync the apps from my laptop and tried downloading new appswith no success.  Can you help?  Thanks

    If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
    How to Solve the Problem of An iPad App Download Stuck on “Waiting”
    http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
    How To Get Rid Of Your iPad App Download Frozen Problem
    http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/ht1725
    Another thing to try - Turn the iPad Off & then back ON.
    If that doesn't work:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • After restart, the Waiting should be gone.
     Cheers, Tom

  • My iPhone 4S has crashed 7 times. I hold down the home key and on button to reboot. I tried a restore but has crashed once since. Do I have a faulty phone ?

    My new iPhone 4S has crashed 7 times ie the screen does not come back on when I press the home key. I hold down the home key and on button to reboot and it always comes back. I tried a restore but it has crashed once since. Is this right  ? Do I have a faulty phone ? Any suggestions ?

    Does the screen come back on if you press the sleep/power button?
    Have you tried powering down (hold sleep/power button and swipe red slider) then power back up?  Power cycling sometimes will clear problems.
    If neither works, and you can get to an Apple store, have the genius bar folks try it out...they are very good about replacement if faulty.

  • I pod disabled  and cant remember passcode. cannot use itunes as it wants update and restore  need to use passcode and the hold sleep/wake key and home key doesnt put it in DFU either . any help ?

    My ipod has been disabled as I cant remember the passcode . When doing a restore on I Tunes it will only update and restore , the update doesnt work as the phone is locked and I need a passcode. I have tried the other way which is to hold the sleep/wake key and home key together  for 10 seconds but as soon as you plug it inot the pc the ipod boots up so this method doesnt work either . Very close to usin it as a brick , any suggestions ?? Thank you

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    Dry another cable
    Next try on another computer.
    Last
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window.  Can I go back to just double clicking ?

    With Mavericks I have to hold command key down and double click to get a sub folder to open in a new window.  Can I go back to just double clicking ?

    Of course. To do it, open a Finder window, go to Finder menu (on the menu bar) > Preferences > General, and untick "Open folders in tabs instead of new windows".

  • How do I turn off programs running in the back ground on my iPad

    How do I turn off apps running in the back ground with the new update

    How to Close Apps
    Double Tap the Home Button... Then swipe the App (not the icon) Upwards... Tap the Home Button when finished.
    From Here  >  http://support.apple.com/kb/HT4211

  • Program with Back Ground User.

    Hi ,
    In my development we are sending data from MDM to R3 through XI.
    Here iam having the following issue:
    When sending IDOC's from XI to R3, some of the IDOC's are struck in Queue  with status 64 and, those not going to be processed at all. This is because of the unavailability of the work processes at that time. All this is done through the back ground user XIS_REMOTE.
    Iam trying to process the unprocessed IDOC's through a standard program, all the IDOC's are processed, but the data created under the Fore Ground user (i.e. my id).
    <b>I want to know is there any possibility to run or write the program using back ground user XIS_REMOTE</b> <b>so that all the unprocessed IDOC's will process and get the back ground user XIS_REMOTE.</b>
    Any inputs appriciated.
    Best Regards
    Shyam Reddy.

    ST05 you can trace SQL-statements and get expainings how these statements are being worked upon by the database. this is more a tool for investigating the performance of abaps on your 'special' database.
    since you posted your request in the security forum i will assume that you want to do an authority trace. use tx. ST01 instead of ST05. Set the filter options to the program and/or user you want to trace and flag the areas you want traced like 'authority check' 'database access' 'kernel commands' ...
    activate the trace using the matchlight-icon. run the background job to be traced. stop the trace after a sufficient time (or until the job hits the error you want to investigate). then press 'evaluation' and check the boxes for the lines to be displayed again ...
    if both my answers don't fit to your problem come back here and state a bit more precisely what your problem is, maybe we find another approach to it.

  • Genetare the back ground jobs of the program from the SM36 tcode

    Hi All,
        Consider the following points:
    -- My main program will schedule the jobs using the CALL TRANSACTION method
    -- Now i want to create a Variant for the Main program and generate the back ground job using the SM36 Tcode
    -- Finally it has all the jobs of the main program
    -- Program is working fine from the Frontend only.....
    Please provide solution for the same.
    Thanks in Advance.
    Regards,
    Ramana

    Sravya,
    On SM36 when you schedule jobs, you will see options like AFTER EVENT and AFTER JOB. You can use these to schedule you jobs accordingly. Else you can also think of making each of these jobs as a steps in one single job if your requirement allows you to do the same.
    In case of using events, you should make sure to raise the event using available FMs.
    thanks,
    Vikram.M

  • How to run the program in back ground with out selection screen ?

    Hi,
    I want to run the program in back ground but don't have selection screen. How to run this program in back ground
    as program has no selection screen.
    Waiting for quick response.
    Best Regards,
    Padhy
    Moderator message: basic, please search for available information/documentation.
    Edited by: Thomas Zloch on Feb 21, 2011 12:43 PM

    Hi,
    Go to transaction SE38 --> Execute --> Background.
    If your program contains selection screen, you have to pass your input values as variants.

  • I need to run the program in back ground and then update two fields

    hi gurus
    i need to run the program in back ground and then update two fields in the z table by mm02 transaction by using bapis , can any one give me the code for this.
    Message was edited by:
            Rocky

    hi
    good
    go through this link
    http://www.sapdb.org/7.4/htmhelp/34/ee7fba293911d3a97d00a0c9449261/content.htm
    thanks
    mrutyun^

Maybe you are looking for

  • Attachment binding issue in workflow

    Hi All, I have used FM 'SAP_WAPI_ATTACHMENT_ADD ' in method of my workflow. Here after executing this FM i m getting id of the attachment for this workitem. But now i need to assign this to  '_Attach_Objects' of workflow container. so please help me

  • The latest version of Firefox dropped a valuable book mark folder

    Recently the Firefox browser has forced 2 upgrades. After the most recent upgrade I am no longer able to see an important bookmark folder. This IS TOTALLY UNACCEPTABLE!! I have spent years assembling various bookmarks that are important to my busines

  • Error when configuring the userstore in OAM for OUD

    Hi, I installed the OIM/OAM sucessfully. I would like to do a PoC to protect one web based application using the OAM. Using the OUD as user story. When trying to create a userstore in OAM, i am getting the below error. However, when i click on test c

  • HTTP Request returns success, but does not work in azure

    I created a simple worker role project that sends an HTTP GET request to the weather underground site to update my weather stats from my weather station. The data it sends is pulled from a SQL database stored on Azure. The solution works perfectly wh

  • Not receiving MouseWheel message because focus is removed from control

    I am trying to implement some mousewheel interaction as can be seen in e.g. Visual Studio. When the mouse is over a control and the mousewheel is scrolled the control under the mousewheel is scrolled instead of the control that has focus. I do this b