Holiday is Not reflecting in Work Schedule

Hi All,
While maintaining infotype 0007, i checked work schedule rule and got to see that one holiday is not reflecting in Work schedule.
I have assigned correct holiday calender and in holdiday calender holiday class is assigned "1" as well.
Assignment of Holiday calender with Personnel area is also correct.
What may be the reason for this issue??
I need holiday class and day type should reflect in 0007 infotype.
Regards
Priya:)

Yes.. It did.
My issue is that all hoidays are reflecting in calender excpt two days....
So that ways there may not be any issue with work schedule generation.
Regards
Priya:)

Similar Messages

Changes to Factory Calendar Not reflected in work schedule

I have updated the exsisting factory calendar in PRD .
Yet the changes do not seem to have taken effect. I have tried to regernerate the work schedule. However I'am not sure I have done that properly.
Any assistance would be greatly appreciated.
Thank you

Hi.. you cant expect any change in the Factory calender affecting work schedules. If you want the work schedules to be updated with the holidays you need to be updating the holiday calender.
Factory calender is mainly for Plant Schedules, Bank transfers in finance , etc

Substitutions not reflected in work schedule

Hi experts,
I have have substitued workschedule , however when i click on the personnel working schedule button and its not reflecting in the employee work schedule .
My situation are suppose an employee work schedule was to be early shift and i substitute it to afternoon shift to replace a staff.The problem is the system does not overwrites my employee working schedule.
Is there any place where i could check whether it had been substitued ?
Regards,
Chris

Hi Chris,
Please ask Piscian how query resolved:
http://forums.sdn.sap.com/click.jspa?searchID=37369186&messageID=8575232
Regards,
Dilek

Work schedule shows a holiday but it is not defined

Hi All,
I have run PT03 to check on my work schedule and it shows a date that is a holiday. I have checked the public holiday calendar and no holiday defined on that day. Checking again on the generated work schedule and clicking on the date where it says as holiday (though not defined in holiday calendar) it pops a message "Calendar not loaded on 21.05.2010". Normally when you double clicked on the date when there is holiday it is displayed beside holiday class field the description of the holiday but this one it does not show any description beside that field.
Hope you can help me on this.
Thank you in advance.

Hi alvin zamora,
One more thing, if you have removed a holiday from the holiday calendar after generation of work schedules, you need to generate the calendar again after removing that holiday, and also generate the work schedule using that calender and save the work schedule, then only you will see the removed holiday effect in the work schedule.
Regards
Venu

PWS not reflecting Holiday class

Dear SAP gurus!
I can see a holiday marked in IT7 under work schedule but when i generate pt 63 the same day no holiday class marked.This is for a fixed holiday with no religion mapped.Due to this system accepts this as working day .Kindly advise.
Regards
Raahul

Dear Rahul,,
Are you confirm that work schedule generated succesfully PT01.
if not generate once again....r not chek holiday configuration with holiday class 1.
and chek the relegion assignment.....in holiday configuration, at the same time chek the master data It0002, whether you maintained Relegion filed.
just check. it will be resolved.
all the best.

Work Schedule in HR Master Data Feeding Work Center!

Hi,
I have several questions on how work schedule in HR master data relates to the work center for capacity planning.
1. How do we assign the employee to a work center? is that in the HR master data or work center or some other transaction?
2. If we can assign an employee to a work center, how the work schedule in the HR master data feeds the work center capacity? Is there any button that I can control whether I want to feed the work center capactiy from HR master data work schedule or from manual input directly to work center?
3. If I can feed the HR master data work schedule to work center, what do I need to do to reflect the vacation time or sick time which is not in the work schedule in the HR master data to the work center?
Thanks,
Ting

Hi,
For starters, please take a look at the following discussion:
Logistics Work Center and HR Work center.
Credits: SDN members
Hope this helps.
Donnie

Work Schedule PT01

Hello Gurus
I am new to HR and need your help for the below issue:
The company is using holiday calender XX where December 24th, 25th, 28th and 29th are marked as holiday. All these days except 25th is maintained as holiday class 3, whereas 25th is maintained as holiday class 1. A work schedule is created in PT01 with the calender XX. In the work schedule 24th and 25th are correctly displayed with holiday indicator 3 and 1, but for 28th and 29th no holiday indicator is displayed.
Could anyone please tell me as to what is the problem and how to rectify this.
Thanks in advance
Sangram

hello sangram,
with the help of tcode SCAL
check these two holidays
28th and 29th December
As they have holiday class 3 customer defined - you may have not defined those holidays - when OR how they are going to occur for that duration (or in that calender year).
Or if you solve with any other solution - then please update your solution here. so that we can let know about it.
Thanks and Regards
Jaydeep Jadhav

Define Work Schedule Rule when Period Work Schedules are created

Experts:
I am trying to configure a DWS and PWS for a given plant. I am aware from a different network thread that this is a 11 step process. I have created the following:
PSG= 03
DWS = 1
Breaks were defined
Created DWS of 1stI, 2ndI, and WNDI (ist shift, 2nd shift, and weekend shift)
Verified day types are correct
Created the following period work schedules:
     WK     1     2     3     4     5     6     7
1STI     1     1STI     1STI     1STI     1STI     1STI     FREI     FREI
1STI     2     1STI     1STI     1STI     1STI     1STI     FREI     FREI
1STI     3     1STI     1STI     1STI     1STI     1STI     FREI     FREI
1STI     4     1STI     1STI     1STI     1STI     1STI     FREI     FREI
2NDI     1     2NDI     2NDI     2NDI     2NDI     FREI     FREI     FREI
2NDI     2     2NDI     2NDI     2NDI     2NDI     FREI     FREI     FREI
2NDI     3     2NDI     2NDI     2NDI     2NDI     FREI     FREI     FREI
2NDI     4     2NDI     2NDI     2NDI     2NDI     FREI     FREI     FREI
WKDI     1     FREI     FREI     FREI     FREI     WNDI     WNDI     WNDI
WKDI     2     FREI     FREI     FREI     FREI     WNDI     WNDI     WNDI
WKDI     3     FREI     FREI     FREI     FREI     WNDI     WNDI     WNDI
WKDI     4     FREI     FREI     FREI     FREI     WNDI     WNDI     WNDI
How do I define the rules to determine variant for monthly work schedule rule generation??
I am aware that X stands for that it is relevant to the calendar and that 1 = Monday - 7 = Sunday.
Can someone help define the work schedule rules I need and what each code means??
Thanks,
Bobbie

Hi Bobbie,
1 . By Using variants you can make changes in normal working timings.....and these changes made in Table         V_T550X...conditions can be applied by using
         ......... Holiday Class
         ......... Holiday Class for the next day
         ......... Weekday
         .........   Variant
Holiday Classes :
Blank stands for -
Not a public Holiday
1 stands for        -
Public Holiday
2 Stands for       -
Half day Holiday
3-9 stands for    -
Customer specific Public holiday Classes
Variants of daily work schedule Selection rule 01 stands for :
   --- Standard variant Blank
   --- variants A for work on Fridays
Variants of daily work schedule Selection rule 01 stands for :
   --- Standard variant Blank
   --- Variant A Work on Friday
   --- Variant B work on Public Holidays of Public Holiday Class 2
   --- Variant C work on days preceding Public Holiday Class 4
For ex: if ur company wants to treat second week of Saturday is half day holiday for employees..then u can do this by fulfilling the fallowing conditions..
            ... Select holiday class 2 in Holiday Class field by putting X
            ...   Holiday Class for the next day select each holiday class
            --- Weekday - select workday as Saturday (6)
......finally create daily work schedule and attach the daily work schedule variant to Daily work schedule (V- T550X to V-T550A)..then u assign ur daily work schedule to period work schedule,period work schedule to work schedule....
.......You can configure these rules for any type of weekdays or weekends ...its depends on the requirement of client to client
........X represent applicability of holiday class in Holiday class and Holiday class next day & weekday...
2 . Come to selection rule.....In selection rule u can treat ur holiday class by using day type...ex ....if u want ur managerial category people won't get paid if they work on public holidays or Sunday...u can do this by using selection rules...
3 . Personnel Time Management :
        --- Work Schedules
                        --- Define Public Holiday Class
Personnel sub area grouping for the work schedules and daily work schedule
daily work schedule .... Break schedule , Define rules for variants & daily work schedule
Define Period work schedule
Day types - Define day types,selection rules & Special days
Work schedule rules and work schedule
           .... Define employee sub group grouping and groupings for public holiday classes
           .... Set work schedule rules and work schedules
           .... Generate work schedules
Please take care of the grouping...
i think now u could the understand the concept now ....
Thanks & Regards,
Avanthika.k

Error "No entry in table T551A" while creating set work schedule rule.

Dear Team,
I am getting following error while creating set work schedule rule.
Error "No entry in table T551A" for key 22 BBB [ here BBBB is my period work schedule]
The actual prob is i configured all the necessary steps but when i tried to create work schedule rule im getting this error. Also, in the same screen there is one field DWS grouping initially value in this is 00 and gread mode. But after giving ES grp, holiday calander ID etc etc when i try to save that screen that value is chainging to 22 from 00.
My ES grop=2 and PS grop=2 . Is that value is my ES and PS grouping..?? or some other thing.
Request you to please help me out.
Regards
Shab.

HI, there are 8 steps you need to do below:
1. Group Personnel Subareas for the Daily Work Schedule
2. Group Personnel Subareas for the Work Schedule
3. Define Break Schedules
4. Define Daily Work Schedules
5. Define Period Work Schedules
6. Define Employee Subgroup Groupings
7. Define Groupings for the Public Holiday Calendar
8. Set Work Schedule Rules and Work Schedules
All of them belong to TIME MANAGEMENT. I think you miss some steps above.
Please check it again.
Regards!
Minh

Work scheduling view-material master

Hi, wht is meant by lot size depenedent parameters and lot size independent parametrs? how to use that data in manufacturing industry? pls advise.

Dear Yadav,
case1: If you have maintained the Inhouse production time for any product in the MRP2 view,this get's automatically reflected
in Work scheduling view as lot size independent Inhouse production time.
At this point if basic scheduling is carried out during MRP then the date calculation will be based upon this number of days
irrespective of the order quantity.
case2:Once after maintaining the operation timings in the routing,you can update the same using CA97,for the relevant task list
type ,group and group counter no and include the check box for update material master directly,you can find the timings
maintained on hour basis in the setup,processing and inter operation (This calculation is based on the timings maintained in the
routing and also your work center capacity details,like the number of hours this capacity will be available for a day).
Once after performing this,even if you have maintained the inhouse production time in days,that value gets removed.
This time will be considered for basic scheduling purpose during MRP.
So in my understanding this will be helpful during the scheduling purpose for the date calculation.
Check and revert back with your further queries.
Regards
Mangalraj.S

Display Work Schedule in ESS

Hello,
I am trying to provide the same functionality that PZ17 transaction (Display Work Schedule) provides in the backend, to the portal. The transaction PZ17 does what I want essentially. Now the problem I have is how do I make it come up in the portal as a service within Portal -> ESS, like leave request. I did not see any configuration in the IMG that would enable this service.
I am new to this, so am not aware if SAP provides this functionality in ESS or not. Any help will be appreciated.
Thanks,
Ajay

Please note some of the services based on ITS which are using cannot be lauched using Webdypro, So you need to make a new service as described using SICF, ALso read the note 870126.
SO you need to create it ie
This is an SICF service which invokes
transaction (which you are using )using the SICF parameter of ~transaction. try creating it
Or note for displaying Work schedule use pt63, you can add this transaction code as well.
Also check this
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/article-Employ
SAPGUIforHTMLinsteadofanInternet+service
read the note 1010519

Customizing Error in Work Schedule

Hello Experts,
I am getting the following error when running time evaluation, "Customizing error in work schedule rule 4 w1 52 REG1/2UP", 2 personnel numbers are being rejected. These two employees work during the summer. We reorg them to put them on leave, Inactive, so no acurals occur during the time they are not on the payroll. When these employees return, we reorg them back to Active. This time when we brought them back to active, we get the above error during time eval. I do not have a work schedule rule 4 w1 52 REG 1/2UP in table T508a. I do have work schedule rules 1 and 2 with w1 52 REG 1/2UP. These two emmployees have work schedule rule 1 w1 52 REG 1/2UP. I have changed the payroll status for retro calculation and I've checked that the employees do have IT0007. Does anyone know where to look to see how the system is coming up with work scheudule rule 4 and how to resolve this issue? Any suggestions are appreciated and points will be awarded to a solution provider. Thanks.

I have ran into this many times at work. Generally for us, this happens when an employee is moved into a new personnel area on infotype 1, where they require a different work schedule rule. However, infotype 7 was not updated for that same validity period and they have the incorrect work schedule.
Example:
Pers Area HYDZ
requires work schedule ZIND
Pers Area PSCC
requires work schedule ZDTA
The employee is in pers area PSCC until 12/31/9999 (with ZDTA on infotype 7). They transfer the employee into HYDZ effective 6/1/2008. However, infotype 7 was not updated and still has ZDTA. As a result, the customizing work schedule error appears during time evaluation. We have to create the infotype 7 record effective 6/1/2008 with the ZIND work schedule rule.
John.

Generation of Work Schedule Rule in Production Client

Dear All,
Is it Possible and Advisable to Generate Work Schedule Rule in the Production Server.
Thanks & Regards,
Punam Jha

Hi Punam Jha,
You'd better generate it in test client and transport into production.
This is the regular way.
Changing work schedule rules in production client is risky.
However, in order to make it happen, please refer to the following SAP Note:
Note 86790 - Generating work schedules in production client
Regards,
Dilek

Holiday not reflecting in Period Work Schedule of employees

Hi friends
I have a serious issue here. I have created a Floating public holiday and assigned to my Holiday calendar which comes on 23rd of May. When I regenerated the Work schedule rule, it is reflecting showing holiday class as 01 and day type as 01. But when I generated Period work schedule for all employees for the month of May, 23rd May is not reflecting as holiday class 01 and day type 01, instead it is showing as work/paid.
Could anyone please help how to resolve this issue.
Regards

Hmm, time evaluation is not a prerequisite for use of substitutions. It is also used in payroll (daily processing) too.
So, if you see you WSR in IT0007 as it is required, then your work schedule is correctly generated. No worries. But when you don't see it in this report then the reason can be substitution or report logic or any other impact (I don't know yet).
Can you check what you see in IT 2051 - it has consolidated view. There you immidiately see any addiotnal time data (attendances, abcenses, substitutions).

Substitution work schedule not reflecting in Infotype 0007

Hi
I substitued workschedule , ican see the periodicworkschedule in 2003 according to new schedule but its not reflecting in infotype 0007

Hi Piscian
When you enter the subst work schedule, you can view the same through info type 2050 or 2051 and not in IT0007.
IT0007 is only planned
where as 2050 & 2051 is actual worked times.
Hope this works
Regards
Mani

Holiday is Not reflecting in Work Schedule

Similar Messages

Maybe you are looking for