Home hub 3 latest update

After latest update to home hub 3 event log shows alot of firewall activity is this normal or is there some other problem.

The event log on my hub is now 6 pages log - it used to be a max of 3. The hub resynched less than 2 days ago so the log runs from that time. The log categories may have changed and the firewall entries that are reported are different.
Somewhat bizzarely the hub home network page says no wireless devices connected so my laptop doesn't exist even though the IP address is within the hub range.

Similar Messages

How to get the latest firmware for BT Home Hub-3 &...

I have had this new BT Home Hub3 activated last night.
To get connected wireless to my Mac Book Air and iPod Touch, I had to refresh the Wireless Channel in my BT Home Hub settings. The Hub has selected the Channel 11 automatically that works well for my home wireless connection.
This morning, my Home Hub has reverted back to Channel 6 and my wireless would not work. I had to go back to the settings in the Home Hub-3 to "Refresh" to select the best Channel and it has chosen Channel 11 again and all works well.
My question is how could I get the Home Hub-3 to remember the selected channel without me in the morning to refresh the setting on a daily basis?[I have tried by selecting the "Apply" and a green circle with a tick to denote that the change had taken place]
Home Hub-3 current firmware Version 4.7.5.1.83.8.45 [Type A] and I noticed a new one available and How could I update mine to the latest?
Regards
Solved!
Go to Solution.

if you select advance settings and go back to the wireless page, you will be able to see channel selection, likely to be on Automatic (smart wireless); here you can manually select channel 11 and it will stay there.
Check your exchange or major service outagesIf someone has given a helpful answer, please click on their Ratings star on the left-hand side. ***

Home hub 3b latest firmware

Hi got the home hub 3b last week having a look around home hub manager checking all the different settings come across firmware which is on Software version V100R001C01B031SP12_L_B last updated unknown, is this the latest firmware?
If not how often does it get updated and does having power save mode on midnight to 7am affect this in any way
Thanks jase.
Solved!
Go to Solution.

Hi Jaseb41,
I think the latest firmware version for the HomeHub 3 Type B is V100R001C01B031SP12 .
Having power save enabled shouldn't effect the upgrading of the home hub's firmware.
So according to your current firmware version and what the BT website says to be the latest version it seems your up-to-date.
If there is a new firmware for your HomeHub3b in the future then it will automatically be upgraded (and they are usually upgraded in batches over a period of time)
Hope that helps,
Cheers
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Home Hub 3 Firmware update stops DNS queries and m...

I am getting very poor service after 5 phones about my incident 1403**-******. The staff cannot understand my problem even though I have explained in clear technical detail. Basically a firmware update has caused my BT Home Hub 3 to have very slow management web interface and fails to handle DNS queries. It connects to the Internet Fine.
The Home Hub has been rebooted and reset many times and no improvement.
Help BT.

I have been DNS having problems with two Chromebooks accessing the internet ever since the latest firmware upgrade to my HH3 on 15 March - calls to BT went over their heads they just blamed it on the Chromebook as no other devices were having problems despite the fact that I made it clear that the problem only started after the latest upgrade - the muppet dealing with the problem even went as far as to say that BT does not support more than 6 devices connected to the hub at anyone time.
I found that the DNS problem does not affect you if you switch from the HH to BT FON even when you are on your own network.
I finaly got round the problem on the chromebooks by going into the settings page on the Chromebook, opening the HH3 settings and selecting the option to use 'Google name servers' from the 'Network' tab.
It has long been an issue for me that the HH3 does not allow me to set my own choice of DNS unless I subscribe to a Dynamic DNS provider from their list - I prefer to use Open DNS to control my network as it allows me to filter out content across the whole network but to do this I would need to replace the HH and that would mean I would lose the Vision service

HT5012 I just downloaded the latest update and now my iPad just defaults to my home screen. I was reading a book on overdrive and I can no longer access it. When I try Safari again it just defaults to my home screen. Help!

I just downloaded my latest update and my Ipad just defaults to my home screen. I was reading a book on Overdrive before t.he download and whe I now Tory to open it just. Takes me to mt home screen. The same with Safari. Any thoughts.

Try a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously you see the Apple logo and then release.

My Windows XP and Windows 7 iTunes no longer 'see' my AppleTV since latest update (25/02/2013). Also, my AppleTV tells me I must turn on Home Sharing which is already turned on.

My Windows XP and Windows 7 iTunes no longer 'see' my AppleTV since latest update (25/02/2013). Also, my AppleTV tells me I must turn on Home Sharing which is already turned on. I have the little arrow that normally selects my AppleTV in iTunes but AppleTV is no longer listed (only My Computer). Is there an issue with the latest update. This is probably my fault by telling everyone how good AppleTV is and that it just works! Doesn't work any more :-( I have tried all the usual restarting of AppleTV and PCs. I'm having to revert back to the Samsung Blu-ray player's PC sharing :-(

Restarted router(s) and it works again.

Home sharing no longer works in latest update. Please fix

Home sharing no longer works in latest update. Apple Please fix.

well, try if anything in the following support articles (unless already consulted) helps:
_*iTunes: Troubleshooting Home Sharing*_
[_*Troubleshooting security software issues*_|http://support.apple.com/kb/TS3125]
[_*Troubleshooting Home Sharing with Apple TV (2nd generation)*_|http://support.apple.com/kb/TS3509]
good luck !
JGG

I am using Firefox 3.6.8. Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards. The problem is this: the browser continues to display tabs, the reload/home/history/favor

I am using Firefox 3.6.8. Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards. The problem is this: the browser continues to display tabs, the reload/home/history/favorites icons, URL field and Google search field while in full-screen mode, so it's not really full-screen anymore. How can I correct this?
== This happened ==
Every time Firefox opened
== Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards.

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Home Button not working properly after latest update

After installing the latest update on my Iphone 4S, the home button immediately started to give me problems. It works sporadically. Sometimes it allows me to close apps when I tap it twice, sometimes it won't do anything, sometimes it will go to the negative effect. This was not an issue prior to the latest update. I have version 7.1. Has anyone found a repair for this?

So did you have a similar issue before upgrading to iOS 7.1? This can also be a hardware issue which you didn't have before.To be sure, get your home button checked top you're nearest Apple store.If you still have the problem, then this may have been caused by a bug.to report the bug, go to this site: apple.com/feedback/iphone.html.The iPhone team may even contact flute further details from you.

IMac at work, iMac at home. (Latest Yosemite and Apple Remote Desktop updates installed) Need to work from home at night. I don't know how to set my permissions so that I can just control my iMac at work.

iMac at work, iMac at home. (Latest Yosemite and Apple Remote Desktop updates installed) Need to work from home at night. I don't know how to set my permissions so that I can just control my iMac at work.

If they have set up port forwarding for you already then that is different. In that case, then you could be experiencing the bug with the most recent release of ARD (3.7.2) and in particular ARD 3.7.2 and Yosemite ARD version 3.8 clients. It has been reported numerous times in the forums and to Apple that since 3.7.2, clients are frequently unavailable to connect to despite there being no network issue between the remote computer and client computer. I have not seen anyone report it who was working from outside the LAN to inside the LAN, but I have the same issue with a number of my own computers that are simply on a different subnet, so it stands rot reason that it would happen from a port forwarding location.
I am sometimes able to resolve the issue locally by SSH connecting into the client computer using Terminal on my admin machine and restarting or relaunching the ARD agent on the remote device, then trying to connect to it again after about 30 seconds.
The Terminal commands for this procedure are as follows, though you might need to include a port number from outside the LAN:
First:
ssh ipaddress -l adminusername
(example: ssh 192.168.1.1 -l macadmin)
Second:
sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -restart -agent
After that, waiting about 30 seconds and trying to observe or control usually works, though the computer may still fail to show an online or lit-up status indicator.

Bt Home Hub 5 new update 4.7.5.1.83.8.204

Hi i just noticed my home hub 5 was upgraded to version 4.7.5.1.83.8.204. i noticed the speeds went up a bit and wifi fixed a bit. i also noticed the icons changed in the home network. but one major thing is ipv 6 was enabled on the home hub 5 but global ip was not. When is t going to turn on ipv6 on there network it is pointless in updating the router with that enabled if you are not going to turn it on on your network. When will you turn it on.

Hi thomasmulhall,
The external network has not yet been configured for IPv6 on a all customer basis. Therefore it is pointless to enable Ipv6 for the external BTW/BTConsumer broadband network if it has not been configured to lease IPv6 addresses.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Latest update 6001 ive lost contacts from home page, can i restore it?

hi
ive just done latest update to my phone 6.0.1 and ive lost contacts from my home page!, can i restore it?
Thank you
Neal

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*http://kb.mozillazine.org/Lost_bookmarks

Manual Firmware Update for Home Hub 2?

Due to a seperate problem mentioned on another thread, I am having to use my Home Hub 2 as an additional wireless AP with my Home Hub 3 as primary router.
My HH2 is on an outdated firmware version but doesn't get updated as it is not directly connected to the ADSL connection, only via ethernet to my HH3.
Is there a way I can apply the lastest firmware to my HH2 without having to use it as my primary router for a period of time?

Hi unfortunately no the only way is with them on-line
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Home Hub 3 Firmware Updates

Will I still be able to receive updates as I have set my powersave to activate between midnight and 7am? Thanks. Rob.

Hi Rob
Yes as the powersave only disables your wireless signal.
"Hub 3 you can turn on BT Power Save. This feature switches off the wireless feature on your Hub so it uses less energy."
From http://bt.custhelp.com/app/answers/detail/a_id/13116
And current versions from HERE are.-
BT Home Hub 3 – Software version 4.7.5.1.83.8.57.1.3 (Type A) or V100R001C01B031SP09_L_B
Type http://bthomehub.home into the address bar of your web browser and press Enter.
Scroll down to the bottom of the homepage.
The software version is shown in the bottom left of the screen.
EDIT From THIS it says....
"If your Hub 3 isn't yet on this version, please leave it switched on to allow the overnight upgrade. You don't need to cancel BT Power Save as the upgrade will still be able to take place."
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

My Apple TV is slow and disconnects after the latest update (5.1). It seems to effect both home sharing and through the net. Is there a known problem?

My Apple TV is slow and disconnects after the latest update (5.1). It seems to effect both home sharing and through the net. Is there a known problem?

Hi Scott.
There is a problem - but Apple have not acknowledged it. Many people on these forums are experiencing the same issue.
To get something done, you should report it here. The more of us that tell Apple about it, the more likely they are to fix it. You could also send a short email headed 'Apple TV update problems' to
<Email Edited by Host>

Home hub 3 latest update

Similar Messages

Maybe you are looking for