Home hub 3b latest firmware

Hi got the home hub 3b last week having a look around home hub manager checking all the different settings come across firmware which is on Software version V100R001C01B031SP12_L_B last updated unknown, is this the latest firmware?
If not how often does it get updated and does having power save mode on midnight to 7am affect this in any way
Thanks jase.
Solved!
Go to Solution.

Hi Jaseb41,
I think the latest firmware version for the HomeHub 3 Type B is V100R001C01B031SP12 .
Having power save enabled shouldn't effect the upgrading of the home hub's firmware.
So according to your current firmware version and what the BT website says to be the latest version it seems your up-to-date.
If there is a new firmware for your HomeHub3b in the future then it will automatically be upgraded (and they are usually upgraded in batches over a period of time)
Hope that helps,
Cheers
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Similar Messages

Home hub 3 latest update

After latest update to home hub 3 event log shows alot of firewall activity is this normal or is there some other problem.

The event log on my hub is now 6 pages log - it used to be a max of 3. The hub resynched less than 2 days ago so the log runs from that time. The log categories may have changed and the firewall entries that are reported are different.
Somewhat bizzarely the hub home network page says no wireless devices connected so my laptop doesn't exist even though the IP address is within the hub range.

How to get the latest firmware for BT Home Hub-3 &...

I have had this new BT Home Hub3 activated last night.
To get connected wireless to my Mac Book Air and iPod Touch, I had to refresh the Wireless Channel in my BT Home Hub settings. The Hub has selected the Channel 11 automatically that works well for my home wireless connection.
This morning, my Home Hub has reverted back to Channel 6 and my wireless would not work. I had to go back to the settings in the Home Hub-3 to "Refresh" to select the best Channel and it has chosen Channel 11 again and all works well.
My question is how could I get the Home Hub-3 to remember the selected channel without me in the morning to refresh the setting on a daily basis?[I have tried by selecting the "Apply" and a green circle with a tick to denote that the change had taken place]
Home Hub-3 current firmware Version 4.7.5.1.83.8.45 [Type A] and I noticed a new one available and How could I update mine to the latest?
Regards
Solved!
Go to Solution.

if you select advance settings and go back to the wireless page, you will be able to see channel selection, likely to be on Automatic (smart wireless); here you can manually select channel 11 and it will stay there.
Check your exchange or major service outagesIf someone has given a helpful answer, please click on their Ratings star on the left-hand side. ***

Home Hub 5 VPN issues after firmware upgrade

Hi all, hope you can help...
I use Check Point SecureClient to connect to work, it connected perfectly until this morning and it It fails with a "failed to update policy" error.
Nothing else had changed, and I could connect to my VPN using my 3G MiFi, so I checked the home hub and the firmware had been upgraded to Software version 4.7.5.1.83.8.204 yesterday evening.
I've spent all day on the phone and chat to BT, and the best they could offer was a call to the tech team who might charge me for fixing this!
Has anyone managed to get round this issue? Is it a known fault? Is a new router the best option, if so which can be configured with the minimum of guesswork?

Have you tried the VPN setting on the Homehub?
http://192.168.1.254/index.cgi?active_page=9121
If you found this post helpful, please click on the star on the left
If not, I'll try again

Ichat AV + BT Home Hub

Sorry for yet another home hub flavoured thread, but I would just like some confirmation on what I think I already know...
My parents have just bought their first mac today, and both I & they have bt home hubs.
Am I right in thinking that ichat will just not work when it comes to audio/video?
Is this likely to be addressed in future updates of the hub or ichat? from what my limited knowledge allows me to understand the issue is with the hub phone & port 5060. I would imagine then that this issue will run and run with no end in sight?
Any kind of help would be much appreciated, but I really just want to know for definite that this is a lost cause and I can stop wasting my time.

Hi,
If the HOME HUB is at firmware 6.2.2.6 then it should work.
It helps if the device is set to do UPnP rather than Port Forwarding.
If you are using the IP Phone feature it seems to help if the settings for it's ports are set to all the SIP port 5060-5063 as iChat can use the spare ones.
Use this site to find out how to acess the device with the default IP, User ID and Password.Use the Pics to find your way to UPnP and the telephony settings I was talking about if needed.
Test with Defcom if he offers as he seems to have more luck getting people going with these.
9:54 PM Monday; September 10, 2007

Cant Open Port 3659 on Home Hub! Please help!

Im having problems with playing Battlefield 3 online. After contacting EA they told me I needed to forward the following ports on my new BT Home Hub 3.0 Firmware Version: 4.7.5.1.83.8.94.1.11 (Type A):
TCP: 80, 443, 9988, 20000-20100, 22990, 17502, 42127
UDP: 3659, 14000-14016, 22990-23006, 25200-25300
All of them were applied fine apart from port 3659 where it gives the following error:
It says theres a conflict even if I try only applying this one rule. According to another forum 3659 is actually the most important as it relates to the 'EA Tunnel' so could explain the issues Im having?
If I use an online Port Scanner, some tell me that its blocked and the following one shows that its (TCP version) filtered to 'apple-sasl'. So it looks like maybe its been pre-reserved for Apple products and hence why it cant be forwarded to a more general rule?
Do BT block or throttle any ports? How can I fix this issue?
Thanks.

Use the IP address not the device name.
This page should help.
Port forwarding problems
There are some CCTV example on this page.
Help with setting up routers, repeaters, Smart TVs, printers, CCTV, NAS, VOIP
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Home Hub 3 Firmware update stops DNS queries and m...

I am getting very poor service after 5 phones about my incident 1403**-******. The staff cannot understand my problem even though I have explained in clear technical detail. Basically a firmware update has caused my BT Home Hub 3 to have very slow management web interface and fails to handle DNS queries. It connects to the Internet Fine.
The Home Hub has been rebooted and reset many times and no improvement.
Help BT.

I have been DNS having problems with two Chromebooks accessing the internet ever since the latest firmware upgrade to my HH3 on 15 March - calls to BT went over their heads they just blamed it on the Chromebook as no other devices were having problems despite the fact that I made it clear that the problem only started after the latest upgrade - the muppet dealing with the problem even went as far as to say that BT does not support more than 6 devices connected to the hub at anyone time.
I found that the DNS problem does not affect you if you switch from the HH to BT FON even when you are on your own network.
I finaly got round the problem on the chromebooks by going into the settings page on the Chromebook, opening the HH3 settings and selecting the option to use 'Google name servers' from the 'Network' tab.
It has long been an issue for me that the HH3 does not allow me to set my own choice of DNS unless I subscribe to a Dynamic DNS provider from their list - I prefer to use Open DNS to control my network as it allows me to filter out content across the whole network but to do this I would need to replace the HH and that would mean I would lose the Vision service

Manual Firmware Update for Home Hub 2?

Due to a seperate problem mentioned on another thread, I am having to use my Home Hub 2 as an additional wireless AP with my Home Hub 3 as primary router.
My HH2 is on an outdated firmware version but doesn't get updated as it is not directly connected to the ADSL connection, only via ethernet to my HH3.
Is there a way I can apply the lastest firmware to my HH2 without having to use it as my primary router for a period of time?

Hi unfortunately no the only way is with them on-line
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Post Moved Home-hub-3-firmware-version

moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Home-hub-3-firmware-version/td-p/879756
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Thanks John, It was a dozy of me to post it in the wrong place!
Doug

THE LATEST SUPER BEATS ALL HOME HUB.

Just seen advert for BT LATEST HOME HUB, good news its a world beater-bad news its for NEW customers only.
In the end we will all be star dust.
Then start all over again.

should it not read
Just seen advert for BT LATEST HOME HUB, good news its a world beater-bad news its for NEW customers only. lol
(certainly not world beater and it is available to existing customers)
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Home Hub Type A new firmware

I note the following message posted by Admin:
Home Hub 3A firmware version 4.7.5.1.83.8.94.1.11 is being rolled out gradually, we started last week. This firmware includes bug fixes for the following issues that have been raised on the forum over the last few months (and longer):
Bug fixes for loopback functionality
Fix for dual boot Windows and Linux Ubuntu machines where previously it wasn't possible to obtain an Internet connection if you switched to Linux OS
Optimisation of Smart Wireless
You'll most likely receive the update before the end of January but we're taking our time with the rollout so it goes smoothly, fibre hubs will be first followed by adsl. We'll come back and update you if it's going to take longer to get everyone's 3A updated.
Whilst any improvements to functionality are welcome, I note that there is no mention of a) correction of the 'time bug', which of course has temporarily gone away since the clocks went went back in October; or b) any corrective action in relation to the mystery of the internittent slow speeds through the Type A's LAN ports i.e. wired speed dropping below 10mbps requiring a hub reset to restore. Any information in respect of these two bugs would be welcome especially the LAN speed issue which appears may be a hardware fault requiring a change to a type B hub!

this post by Stephanie confirms that 10mb problem will be fixed in update - although not mentioned in Stephanie's upgrade post
http://community.bt.com/t5/Other-BB-Queries/HomeHub-3-LAN-speeds-only-10Mb/m-p/691362#M35575
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Home Hub 3 Firmware Updates

Will I still be able to receive updates as I have set my powersave to activate between midnight and 7am? Thanks. Rob.

Hi Rob
Yes as the powersave only disables your wireless signal.
"Hub 3 you can turn on BT Power Save. This feature switches off the wireless feature on your Hub so it uses less energy."
From http://bt.custhelp.com/app/answers/detail/a_id/13116
And current versions from HERE are.-
BT Home Hub 3 – Software version 4.7.5.1.83.8.57.1.3 (Type A) or V100R001C01B031SP09_L_B
Type http://bthomehub.home into the address bar of your web browser and press Enter.
Scroll down to the bottom of the homepage.
The software version is shown in the bottom left of the screen.
EDIT From THIS it says....
"If your Hub 3 isn't yet on this version, please leave it switched on to allow the overnight upgrade. You don't need to cancel BT Power Save as the upgrade will still be able to take place."
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

Home Hub 2 Firmware unstable

Gents
Why is it when either I look at the Internet setting or the ADSL setting.
Mainly the Internet settings the Hub starts to recycle it does not do it all the time.
But when it does start doing it ,has a impact on my IP profile.
I know it is the Hub or the Firmware as I have a And HH2 and it does it on that.
Any Ideas out there is there anyway to reload the firmware in case of corruption
Current firmware
Current firmware
4.7.5.1.83.3.18 (Type B)
Last updated
13/05/11

I am one of the sufferers of this "fault" on my HH2 Type B with 4.7.5.1.83.3.18 firmware ( I noted this on 14 May, but don't know when it was updated.
I get the flashing orange BB light sometimes on accessing the HH pages.   I have even had it happen two or three times in succession, within a few seconds of turning blue each time.   I also get random disconnects, but whether this always shows the flashing orange I'm not sure, as I am not neccessarily in front of the computer.   I have just ocassionally caught it when I'm browing with Firefox, but it re-synchronises within a few seconds. My present data are,
Downstream    14,336 Kbps
Upstream    1,078 Kbps
Noise margin (Down/Up)    7.8 dB / 6.5 dB
Line attenuation (Down/Up)    27.3 dB / 11.5 dB
Output power (Down/Up)    25.7 dBm / 1.9 dBm
FEC Errors (Down/Up)    34 / 19255
CRC Errors (Down/Up)    10 / 121583
HEC Errors (Down/Up)    263 / 0
Error Seconds (Local/Remote)    5 / 17719
I have not noticed any significant change to my profile, even with the random disconnects, since allowing my line to stabilise (took about 14-16 days) as noted in the thread
Data on HH2 Achieving Stable Line Rate & Switching the HH Power Off Once per Day, on 30-05-2011
also the threads
Re: Sporadic random disconnects this week, very bad today., on 03-06-2011
Re: Disconnects on Accessing HH and Random Disconnects at Night, on 10-02-2011
Rodney Fry

Latest home hub

hello just got the home hub 5 and fibre broadband and it works very well but have a general question as someone has told me the home hub 6 is out
is this true
p.s repair computers and have not seen any hub 6 anywhere yet
Solved!
Go to Solution.

It is not true there is only a home hub 5 A or B
If my post has been useful, please click on the Ratings star on the left-hand side of the post.

Attempted Iphone 4 update to latest firmware update "failed"

Ive attempted to update the Iphone to the latest firmware update and it has failed 3 times, the final time it looked as though
it worked but stopped and went into new mode to go-back to Restore to old setting. Now it is locked up and asking me for the admin backup password
and everything I've tried is not working.. Not sure what to do at this point.
The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
I'm open to any ideas at this point.
Thanks Artman

Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
Open a Command window and type the command "netsh winsock reset"
Reboot your computer
Disable your antivirus and firewall
Launch iTunes
Connect the phone using a USB port directly on the computer, not a hub
When the phone is recognized in iTunes click on it, then click Restore
If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
If the update completes you are in business
You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

Home hub 3b latest firmware

Similar Messages

Maybe you are looking for