Home Hub 4 - pc webpage keeps defaulting to BT Sma...
Hi,
Been with BT about 2 months, been fine. I then changed my password on my Home Hub 4. Now every time I open a webpage on my pc it defaults to "Welcome to BT - Get on line with Smart Set Up".....which I already set up when I signed up for broadband. (I'm using a homeplug for the pc, but we've also had the problem on our mobiles.)
I have to reset the hub in the pinhole as a workaround.
Coincidence maybe??....but a lady has been ringing us to say she was ringing her new BT phone number....it was a different number to mine, but it kept ringing my phone.....& when I ring my number it rings out where?....I don't know.
I would appreciate any advice...or any words to soothe me - Thank you.
I think it was moved because your problem sounds like a crossed line, which is why your Internet has stopped.
You need to report a fault to 151, or online here Reporting Phone Faults
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
Similar Messages
-
Re: 2nd home hub 5, Infinity still keeps disconnec...
Hi Everyone..
Hopefully someone could shed some light on this wierd issue I'm having.. and in a way I'm glad to see its not just me having the same issue as Jamesvolvo...
After three engineer visits, well actually two visits as the 1st engineer was booked out between 8am and 1pm slot, but turned up after 3:30pm when I'd gone back to work.
As far as I can tell, this dropout problem became more noticeable within the last 4+ weeks where suddenly getting shouts from the family 'has the broadband gone down' and when checking the hub 5 seeing it with its blinking orange/red light and a red/orange B symbol (the light eventually returning to green and then blue) and the dropout consistency ranging from a few minutes uptime to a few hours uptime.
Also on top of the hub5 loosing it's WAN link on a few occastions I noticed that when the broadbad went down/up, I was unable to hear a dial tone when trying to call out on the landline and a phonecall from a mobile to the landline number would after allow me to hear a dial tone (where there was none before).
So 2nd engineer came out, nice chap.. and looked at the wiring at the infinity master socket, the socket at the front door and the splitter/bridge connection (which was put in when I went from BT ADSL to Infinity by BT contractors) etc.. and told me that it'd all been wired up wrong and was impressed that anything was working. So he made the necessary re-wirings and tested the line and the broadband and found no faults.
So the next day or so I then get a call from the wife informing me that she can't dial out on the landline and that there was no dialtone. So when I got home from work I then went round (again), powercycling the phones and making sure that they were connected into the sockets correctly and even tested (as per BT line fault diagnostic process) into the infinity enpoint test socket.. still no dial tone.. so again I dialed the landline from my mobile and after the phone rang and I hung up, I then found I got a dial tone. (yay).
Checking the hub5 WAN syslogs I saw the same behaviour as jamesvolvo - (see below - ive filtred out all the other lines just to show the up/down/up/down cycles)
08:24:10, 29 Apr. (60063.610000) PPPoE is up - Down Rate=38274000Kbps, Up Rate=9999000Kbps; SNR Margin Down=16.3dB, Up=14.1dB
08:23:19, 29 Apr. (60012.570000) PTM over DSL is up
08:22:41, 29 Apr. (59973.970000) PTM over DSL is down after 963 minutes uptime
08:22:41, 29 Apr. (59973.960000) PPPoE is down after 963 minutes uptime [Waiting for Underlying Connection (WAN Ethernet 2 - Down)]
08:22:35, 29 Apr. (59968.290000) PPP LCP Send Termination Request [User request]
16:19:35, 28 Apr. ( 2187.920000) PPPoE is up - Down Rate=39952000Kbps, Up Rate=9999000Kbps; SNR Margin Down=16.6dB, Up=14.2dB
16:11:06, 28 Apr. ( 1679.170000) PTM over DSL is down after 13 minutes uptime
16:11:06, 28 Apr. ( 1679.160000) PPPoE is down after 12 minutes uptime [Waiting for Underlying Connection (WAN Ethernet 2 - Down)]
16:11:01, 28 Apr. ( 1673.900000) PPP LCP Send Termination Request [User request]
15:58:10, 28 Apr. ( 902.870000) PPPoE is up - Down Rate=39952000Kbps, Up Rate=9999000Kbps; SNR Margin Down=16.5dB, Up=14.1dB
115:56:41, 28 Apr. ( 814.350000) PTM over DSL is down after 6 minutes uptime
15:56:41, 28 Apr. ( 814.340000) PPPoE is down after 5 minutes uptime [Waiting for Underlying Connection (WAN Ethernet 2 - Down)]
15:51:19, 28 Apr. ( 492.570000) PPPoE is up - Down Rate=39952000Kbps, Up Rate=9999000Kbps; SNR Margin Down=16.3dB, Up=14.1dB
15:49:52, 28 Apr. ( 405.600000) PTM over DSL is down after 0 minutes uptime
15:48:35, 28 Apr. ( 328.270000) PTM over DSL is down after 2 minutes uptime
15:48:35, 28 Apr. ( 328.260000) PPPoE is down after 1 minutes uptime [Waiting for Underlying Connection (WAN Ethernet 2 - Down)]
15:48:30, 28 Apr. ( 323.290000) PPP LCP Send Termination Request [User request]
15:46:58, 28 Apr. ( 245.670000) PPPoE is up - Down Rate=22400000Kbps, Up Rate=4789000Kbps; SNR Margin Down=6.4dB, Up=5.6dB
So I called out BT again and again got the BT fault manager leaving me a voicemail saying not to worry but they had found 'something' on the local network and would also send an engineer to the CAB and test my connection from there saying that the engineer wouldnt need access to my home as the previous engineer had already done the re-wiring and tested it all ok.
Wouldnt you believe it, the engineer needed access to my home so I had to dash back from work to meet the engineer who was in the process of re-wiring the connection in the street. He'd found some water in the black cylinder under the pavement, so cut the wiers and put on new connectors etc and then went inside the house to test the line and broadband (again). And as with previous tests, no fault found.
He did give me a heads up as to not to keep calling BT (openreach) out, as the line tested ok and if i kept doing this, BT would no doubt start charging me for the callouts.
This kind of leaves me in a bit of a wierd position as where do I go from here? he suggested that I get BT to change the hub 5 from the mk1 to the mk2 that had just come out to see if that would fix the issue, but could not tell me straight why I was having this issue, I even showed him a video I took on my phone of the problem when I lost he dial tone and the testing I did, (BT phone LCD showed NO LINE) as if thats not enough proof that I have an intermittent problem!! and showed him the WAN syslosg to which he agreed "something definately wasn't right" and just re-iterated that it woudl be worth getting the latest hub 5 out of BT's doors.
So im having to post here to see if anyone has an answer as I'd hate to incur any costs from BT.. (£139??) Hopefully this forum moderator will see the issues we're having and help us out.. (other than making a seperate/new thread with the information I already posted in here)..
Regards
DeltaOskarMikeHi Imjolly
Thanks for getting back to me.
Here's the information - although I've sanitised what I think is personal information...
ADSL Checker
BT BROADBAND AVAILABILITY CHECKER
Telephone Number xxxxxxxxxxx on Exchange THATCHAM is served by Cabinet xx
Featured Products
Downstream Line Rate(Mbps)
Upstream Line Rate(Mbps)
Downstream Range(Mbps)
Availability Date
HighLowHighLow
FTTC Range A (Clean)
80
64
20
20
Available
FTTC Range B (Impacted)
79.6
52.9
20
12.2
Available
WBC ADSL 2+
Up to 7
4.5 to 11
Available
WBC ADSL 2+ Annex M
Up to 7
Up to 1
4.5 to 11
Available
ADSL Max
Up to 5.5
4 to 8
Available
WBC Fixed Rate
2
Available
Fixed Rate
2
Available
Other Offerings
FTTP on Demand
330
30
Available
Fibre Multicast
Available
Copper Multicast
Available
Troubleshooting > helpdesk
1. Product name: BT Home Hub
2. Serial number: xxxxxxxxxxxxx
3. Firmware version: Software version 4.7.5.1.83.8.204 (Type A) Last updated 22/01/15
4. Board version: BT Hub 5A
5. DSL uptime: 0 days, 01:25:00
6. Data rate: 9999 / 38274
7. Maximum data rate: 22729 / 75117
8. Noise margin: 13.9 / 16.4
9. Line attenuation: 19.4 / 15.7
10. Signal attenuation: 19.4 / 15.7
11. Data sent/received: 14.4 MB / 191.9 MB
12. Broadband username:
13. BT Wi-fi: Yes
14. 2.4 GHz Wireless network/SSID: BTHubxxxxxx
15. 2.4 GHz Wireless connections: Enabled (802.11 b/g/n (up to 144 Mb/s))
16. 2.4 GHz Wireless security: WPA2
17. 2.4 GHz Wireless channel: Automatic (Smart Wireless)
18. 5 GHz Wireless network/SSID: BTHubxxxxxxxx
19. 5 GHz Wireless connections: Enabled (802.11 a/n/ac (up to 1300 Mb/s))
20. 5 GHz Wireless security: WPA2
21. 5 GHz Wireless channel: Automatic (Smart Wireless)
22. Firewall: Default
23. MAC Address: xxxxxxxxxxxxx
24. Modulation: G.993.2 Annex B
25. Software variant: AA
26. Boot loader: 1.0.0
I've not done a quiet line test but will go though that process if/when I have a problem with the no dial tone next time.
Unfortunately I dont have a corded phone but for sanity's sake will no doubt get a cheap one from somewhere 9even if its just for future line testing) to eliminate any issues with the cordless bt phone I have.
Broadband doesnt appear to drop when I recieve a call and when I have had no dial tone in th epast I still have had broadband access. Although i know that on one occasion the hub5 did its usual sidconenct/reconnect (giving me broadband) but when checking the phone - there was no dial tone.
Also the title/problem description should change as its been moved - should be "Hub 5 keep disconnecting/reconnecting frequently"
Note: Looking at the same reported behaviour on other threads I can see as a last update from StephanieG (Community manager) below...
Re: HH5 New Software Version 4.7.5.1.83.8.204
on 23-02-2015 12h31
Hi Guys,
We can confirm that our technical team have rolled out a fix to all affected Home Hub 5As, so your service should be back to normal. The fix is a configuration change to the current firmware 4.7.5.1.83.8.204. We apologise for this issue and thank you for your patience.
This thread will now be locked. If you are continuing to experience any issues with your broadband connection, it will be due to a problem with your own connection. Please could you start your own thread about the issue, so that the community and the mod team can look at your problem individually.
So does this mean there's an additional fix to firmware release 4.7.5.1.83.8.204 ? as it appears that the fix was on or after 23/2/15 and my last firmware update was 22/1/15..
Regards
DeltaOskarMike -
Home hub 3, Bt infinity keep rebooting and resynci...
About a month ago, my link started playing up.
about 2 or 3 times an hour it loss sync or something and we lost the Internet for about 1 or 2 minutes
and about every 2 or 3 hours the home hub reboots.
has anyone got any ideas on how to sorting it out?
RogerAre you experiencing these dropouts via Ethernet or via Wireless? You could try a factory reset of the hub, on the back of the hub there is a pinhole where you stick a pen in and push to reset it back to default settings.
Regards Edd
Check your Line
BT Speedtester -
IPod touch keeps loosing my home hub as the default wifi connection
Can any one tell me how I can keep the Home hub as my default wifi connection when I am at home. Currently I will set it to connect to the Home hub and it does no problem. then when I stop using it for a while it becomes disconnected and I have to reconnect it manually again which can be a bit of a nuisance.
Any help on this and why it is happening would be much appreciated thanx ahead of timeyes it is thats not the problem its staying logged on it seems after a period of inactivity it unlocks itself and locks on to a free wifi network like BTzone which although that is great for out and about stuff but not at home when I have my own network.....any ideas would be appreciated as to why this is happening and how I can stop it thanx ahead of time
-
The wifi on my iPod keeps going off. I go to settings, turn wifi back on and click on my home hub in choose a network zilch!!! message pops up 'Unable to join the network'!! Can anybody please suggest a solution. I am not really a tech type but if given clear instruction I may be able to solve this menace. Thanks
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Re: Home Hub Manager Default Password
Dear Sir/Madam
I am a 70 year young lady but not a wiz kid!
I just want to know the default password of the hub so that I can change the router to wireless.
Thank you for your help
Looking forward to hearing from you at your earliest convenience
Yours faithfully
HHuguetteAvila wrote:
Dear Sir/Madam
I am a 70 year young lady but not a wiz kid!
I just want to know the default password of the hub so that I can change the router to wireless.
Thank you for your help
Looking forward to hearing from you at your earliest convenience
Yours faithfully
H
Hi and welcome to the forum
Your Home Hub "should" already have wireless enabled. What version of Hub do you have?
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button. -
<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/858808]]</blockquote>
Home page reset not working. I follow directions and say Yes
to question re New home page, but system keeps defaulting to existing home page.What '''''is''''' the web page that has taken over the homepage feature?
-
Home Hub keep dropping the connection
Hi, getting rather fed up with this now, i have a HH2 and phoned BT and spoke to someone in India he tested what he could and decided to send me another Home Hub 2.0.
In the mean time i changed all the filters on the sky tv and the land line socket, got new HH and fitted it, went to change setting and password and it dropped out, so i did this again and again and again and well you get the idea, same old problem different day, i do downloads and leave the computer on of a night and in the morning i have no connection, not just once but all the time, during the day at anytime i get drop outs frequently and its really gets on my nerves resetting the poxy hub
Any ideas?.....thanks
DafHi, i ran the test and its asking me this
Go to the start menu, click Settings, Control Panel and the Network Connections folder.
Select the Connection that you use to connect to your ISP.
Change the Username to: speedtest@speedtest_domain and blank the Password.
Set this connection as your default and click Ok.
Double click the connection and wait for the message "Connected".
Once this has successfully Connected, click the button below:
I havent got a clue what its on about and i tried, since i posted i have had to reboot the hub 3 times today, not good at all, since i came from a ISP that was better than what im getting and cheaper!
I am on a wireless Belkin N
Im sorry i cant do what the computer is asking as i dont know how, if you can bare with me and list in laymens turns i might be able to do it?
Thanks for your time, shame BT cant come round and sort the mess out ...pigs may fly -
I am trying to connect my new ipad to my BT Home Hub but keep getting a message saying that I am unable to join the Home Hub network. Any advice?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
What is the default MTU setting for bt home hub 4?
Hi everyone, I am setting up a non-bt modem/router, and I am being asked for a MTU value. Please can you tell me what the default mtu was for the bt home hub 4 (my old router)? Since I'm on the same line that's the value I need. If it helps, I think I'm on adsl 1 since my predicted line speed is about 1.5 Mbps. Thanks!
Solved!
Go to Solution.MTU IS 1500 by default
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
PC keeps disconnecting from home hub.
Got a very annoying problem, for some reason my computer keeps disconnecting from my home hub. Its got much worse recently and I have no clue what is doing it. Sometimes it can stay disconnected for a couple of hours and when you finally get the connection back it says it cant connect to the Internet. Also my network adaptor cant find my hub but it will find my neighbours even though the hub is just down the stairs from my PC. Signal it good-excellent. There are 2 other computers using the same hub but the are totally unaffected by this.
Would really appreciate some help.from your comments I assume you are using wifi
you can try downloading inssider3 (istumbler if MAC) and then run it. This will show the broadcasting networks round about you and their channels including your own. If you then enter your router and change your wireless channel to a free or less congested channel.
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Home hub 3 keeps disconnecting ethernet device
I have a home hub 3 and a iomega home media network hard drive which is connected via one of the ethernet ports on the home hub. On my old Home hub the device connected fine however on my new home hub 3 it connected at first for a day and then disconnected and will not connect again. I menetioned this to the infinity engineer who surgetested I could have one of the older Hubs or it had faulty ethernet ports. I have tryed chaning the ethernet port, but when I look at the advanced settings of the hub and look at connected devices it reports not connected for the Iomega drive. How do I log a fault call to get a replacement hub, or can I force a firmware update. mine has version V100R001C01B031SP09_L_B.
Please tell me how I can log this online so I do not have to ring India again!
Yours
AndrewNo problem about the delay in replying, as you put my name in the text of you message, I got an automatic alert
Yes, the problem with the Ethernet ports is in this thread.
http://community.bt.com/t5/BB-Speed-Connection-Issues/HomeHub-3-LAN-speeds-only-10Mb/m-p/238589/high...
The long term answer would be to connect your own Ethernet switch to the GigE port, and not to use the other ports.
I am not sure if the HH3 issue will be solved, as I suspect its a hardware design issue.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Ever since i have upgraded to IOS6 My connection to my BT Hub 3 wifi router keeps dropping out whenever i am streaming video. I have an Apple TV connected as well which is fine as are other devices, its just the Ipad since the move to IOS6. It is really frustrating and i had hoped the 6.01 release would have resolved it, but it didnt. I have seen other similar comments, i just want to know if this is a common known fault which Apple are going to fix.
The strength of Apple has always been 'it just works' , i can't help but feel that there are cracks appearing in this.
DavidSome things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I received my home hub 4 in October 2013 but after numerous calls to the BT Helpdesk I have now had to revert back to my home hub 2 to get a decent reliable signal Im currently paying for BT infinity unlimited but I'm seriously thinking and going to sky they seem to a more reliable product. I've phoned the BT Helpdesk and they are equally useless being on hold for 45 minutes and being transferred to be put on hold for a further 20 minutes with no resolution to the issues I've reported
Hi Dogandnophone,
I'm sorry that you're having problems with your BT home hub dropping out. Have you tried to manually change the wireless channel? Check out this link for help with this and let me know if it works.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
BT Infinity Home Hub 5 keeps disconnecting
We have the Home Hub 5 broadband for few months. We have been experiencing the regular (10-20) disconnections per day, without the internet connecting back automatically. We need to go back to networks and select connect (or sometimes disconnect, as the message is that the connection is limited) and then try to connect again. Despite having selected connect automatically on many occassions, that is never implemented. Sometimes, when the connection drops the router light changes to orange colour (for few seconds) and then get blue again, sometimes it seems to stay blue throughout.
Distance Selling regulations alone won't be of much use unless it has been less than 7 days since you received the HH5. If it is less than 7 days, contact them and inform that you wish to return the item - you do not need to give a reason.
If there is a fault then your contract is with whoever you purchased the items from. If BT directly then it is them you'll need to speak to, however I "believe" you have to give them "reasonable" time/chance to sovle the issue before a refund can be demanded.
Maybe you are looking for
-
how do i sort out error r6034 on my windows vista when i try to start itunes ??? the message box is from microsoft visual c++runtime library, it says an application has made an attempt to load the C runtime library incorrectly, P;ease contact the app
-
Hotmail Account Not Displaying Correctly in IE10
Hi there, I am having issues with my hotmail account which as of today is not displaying correctly in IE10. Everything was working correctly up until this morning. I can't get any emails to load and it looks terrible. I can't access folders either
-
Hey, Im looking to upgrade RAM on my Mac mini core solo, and found quite alot of options! Transcend RAM came up a few times and i had never heard of them, are they any good? the link to the RAM is here: http://www.orcalogic.co.uk/asp/AppleMac_mini_1.
-
ISE : Authentication for IKEv2
Just to check if anyone might be able to assist me regarind an issue that I am trying to work out a solution for. My Requirements are: Multitenant deployment using ASR1K with IKEv2 vpn authenticated with ISE or ACS and user databases in most cases wi
-
Best solution for multiple host tradingpartners
Hi guru's, I have the following situation: Customer currently has one department sending EDIFACT (over Generic Exchange) messages to trading partners. Customer now wants to add a new domain to the current installation, for a second department. Much l