Home Hub 5 VPN issues after firmware upgrade

Hi all, hope you can help...
I use Check Point SecureClient to connect to work, it connected perfectly until this morning and it It fails with a "failed to update policy" error.
Nothing else had changed, and I could connect to my VPN using my 3G MiFi, so I checked the home hub and the firmware had been upgraded to Software version 4.7.5.1.83.8.204 yesterday evening.
I've spent all day on the phone and chat to BT, and the best they could offer was a call to the tech team who might charge me for fixing this!
Has anyone managed to get round this issue? Is it a known fault? Is a new router the best option, if so which can be configured with the minimum of guesswork?

Have you tried the VPN setting on the Homehub?
http://192.168.1.254/index.cgi?active_page=9121
If you found this post helpful, please click on the star on the left
If not, I'll try again

Similar Messages

PC Suite Issues after Firmware Upgrade of N73

Hi,
A new Firmware finally became available for my N73. The version number of this firmware is 4.0735.3.0.2.
After upgrading my firmware, every time I connect my phone via bluetooth or USB i get the "The connected mobile phone does not have PC Suite support installed" message. When I try the Help -> Reinstall PC Suite Support option, nothing happens on the phone.
I am able to view my messages via Windows Explorer (but they do not appear in PC Suite below the phone image), do a sync with Microsoft Outlook, sync with Lifeblog, etc - no problems. The only thing that does not work is installing applications via the Nokia Application Installer. Whenever I try to install an application, I get an "Operation Failed" error on the PC, and nothing happens on the Phone. I have tried installing various apps (fring, snake, Conversation) but all result in the same error.
I have tried this in Windows Vista (with latest updates) and on a clean install of Windows XP SP2.
Summary of my Configuration:
Phone: N73 (RM-133)
Product Code: 0542457
Firmware: V 4.0735.3.0.2
Operating System 1: Windows Vista
PC Suite Version: 6.85.14.1
Bluetooth Stack: IVT BlueSoleil 5.0.5.178
Operating System 2: Windows XP SP2
PC Suite Version: 6.83.14.1
Bluetooth Stack: Standard Microsoft Bluetooth Stack
Has anybody experienced similar issues? Can anybody help me? Any help will be appreciated.

I have never had such issues with my N73 - same firmware on three different systems. I have upgraded the firmware 4 or 5 times. The fact that your phone refuses to install via Application Installer makes me think that there is some issue with the phone itself - corrupted temp folder or something. If the problem irritates you too much, backup the phone and do hard reset (hold *, Green key and 3 while powering on).
Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
If I've helped, use the Kudos button to thank

Login issue after Firmware Upgrade Ver.4.21.5 for WRT54g v2

I just updated the firmware to Ver.4.21.5. After I log in to the router, each time I change Tabs or I save a change I am prompted for the Admin password. This is annoying, but not a limiting factor for changing settings. Is there a fix for this?
Thanks

davekstl wrote:
I just updated the firmware to Ver.4.21.5. After I log in to the router, each time I change Tabs or I save a change I am prompted for the Admin password. This is annoying, but not a limiting factor for changing settings. Is there a fix for this?
Thanks
u can reset the router and reconfigure it . it should not keep on prompting anymore .
I believe that I can make it

Crippled 192.168.1.1 page after firmware upgrade

hi,
i recently upgraded the firmware of my WRT160N V2 to 2.0.03.
but since then when i login i get a crippled page on 192.168.1.1 with not even a menu. so i cant even downgrade. is there something i can do?

It is good to know that the issue is resolved
After firmware upgrade it is always recommended to reset and reconfigure the router and I think that is why you were unable to see the menu on the setup page of your router.

PC-Suite sync fails after Firmware upgrade of E65

After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
- PC-Suite updated to 7.0.9.2
- Outlook 2003
- XP Prof.
Any ideas?
Solved!
Go to Solution.

The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
Does somebody has an idea?

Performance Issues after an Upgrade

Hello!
We are experiencing performance issues after we upgraded to a new version of Hyperion (11.1.2.1). At this point, I am not too sure about the actual causes for this degrade in performance but I am trying to narrow down the causes and need your inputs. Please help me with your ideas.
1) What could be the causes/factors for the performance to degrade after an upgrade?
2) Does the performance of a script depend on the user credentials i.e. who is launching the script? Whether it’s the super admin of the application/application owner or an application specific admin?
3) Does the performance of the scripts depend on the place you are launching it from? For example - will the performance differ if it’s launched from MaxL Vs EAS?
Please let me know your thoughts on this.
Thanks,
- Krrish

There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
HTH-
Jasmine.

Performance issues after iOS4 upgrade

hello everyone,
I had notices few issues after I upgraded my iPhone 3GS:
1- The screen is not rotating (when reading e-mails of flipping photoes).
2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
3- my Ipod is not working.
4- I could not restore my device via the itune.
my big question is there a real tangible benifit for this new upgrade?
I really appreciate if you can help me soon
thanks.

There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
HTH-
Jasmine.

T410i SSD user and master password problem after firmware upgrade

Hello.
I have problem with my Corsair Force 3 120GB SSD. After firmware upgrade of SSD my master and user HDD passwords are no longer valid. I'm stuck on BIOS screen and cannot unlock my SSD. After firmware upgrade procedure i got BSOD. Same happened during firmware upgrade on my previous SSD (INTEL X25-M 80GB) but after restart everything was OK. Please help!
Previous firmware version: 1.3
Current firmware version: 1.3.3
SSD connected to another computer shows RAW partition data, but firmware version is 1.3.3 - seems like update was successful.

My X301 Intel x18 got bricked also after a BIOS update then secure erase (was going to sell it). I plugged it to a USB kit and onto a desktop and it was recognised and able to format. But plugging it back to the lenovo it is still a brick. My lucky star there was warranty it was replaced by lenovo.
You may want to try it and extract the data, if it works. And hopefully you can still format it and made it work pluggin back to the lenovo.

VPN Client Issue after Vista Upgrade

Not sure if this should be posted here, if not please let me know.
My organization has recently implemented Vista via an Upgrade-in-Place Process that takes an imaged system (Windows XP Pro - 32bit) and upgrades the system with a network image of Windows Vista Enterprise. Applications are left installed and herein lies my problem.
I'm using Cisco VPN Client 5.0.04, the client worked fine before the upgrade, after the upgrade, not so well.
While troubleshooting I noted the Cisco Systems VPN Adapter was no longer listed as being installed under Network Adapters in the Windows Device Manager, there was however an adapter, labled 6to4 adapter with an exclamation point. I went through the uninstall process for the Cisco VPN Client, rebooted and reinstalled. When trying to connect, I can use one of two pcf files (both are a back up of one another), the first connection profile goes through the motion of connection, tries to contact the security gateway, and states "Not Connected"
I enabled logging on the connection and tried again. Here's an excerpt from that log:
09:37:18.278 04/21/09 Sev=Warning/2 CERT/0xA3600038
Successfully added Key Usage fields to be matched.
7 09:37:19.792 04/21/09 Sev=Warning/2 CERT/0xA3600038
Successfully added Key Usage fields to be matched.
8 09:37:20.338 04/21/09 Sev=Warning/2 CERT/0xE3600001
Failed to launch application using cert pipe due to error: 0x800b010a.
9 09:37:20.338 04/21/09 Sev=Warning/2 IKE/0xE300009B
Failed to generate signature: Signature generation failed (SigUtil:97)
10 09:37:20.338 04/21/09 Sev=Warning/2 IKE/0xE300009B
Failed to build Signature payload (MsgHandlerMM:489)
11 09:37:20.338 04/21/09 Sev=Warning/2 IKE/0xE300009B
Failed to build MM msg5 (NavigatorMM:312)
12 09:37:20.338 04/21/09 Sev=Warning/2 IKE/0xE30000A7
Unexpected SW error occurred while processing Identity Protection (Main Mode) negotiator:(Navigator:2263)
Has anyone seen this behavior after an upgrade from XP to Vista? I'm I going to have to start with a fresh install? I appreciate any suggestions or advice.
Thanks,
Jimi

I finally figured out this problem and I feel it should at least be shared for another person who runs into this problem.
The problem was resolved by loading my personal certificates (the one that is read by the smart card reader and used to authenticate me on VPN) needed to be added to the personal certificates folder in the Local Machine layer.
I did this by opening up an MMC window --> Adding the certificates snap-in (in windows 7 it distinguishes 3 different layers, so choose the local user and the computer layer) --> and then copying the certificates in the personal folder located under Certificates - Current User into the personal folder located in Local Machine.
The most likely reason this happened to me is that the image I was working with had security settings blocking the certificates to be read at the current user level and not at the local machine level. Therefore, it's a problem with out image and the security policies put in place at the registry level and/or group policies placed in Active Directory. This is more of a workaround than an actual fix to the problem, but at least it pinpoints where the break is happening.
Now I can push the image back to the developers to review the security policies placed in the image.

N96 Home screen changed after firmware upgrade

I just updated my N96 fimware and now my home screen top bar shows different icons, the last two now show icons for downloaded applications. What settings have changed and how do I change back to my original icons.

Hi there.
The firmware upgrade does reset a few settings. It is easy to change things though....
Click on Tools > Settings > General > Personalisation > Standby Mode > Shortcuts
You can then change the shortcuts to whatever you want.
Hope that helps.....
There are 10 types of people in the world. Those who understand binary and those who don't.

HP 5524 Wireless does not work after firmware upgrade

HI,
I have just purchased an HP5524. After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully.
However, ever since wireless will not work. Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum. The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
Thank you

Hi,
Thank you for posting you query,
In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen instructions.
If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

E71 wlan issue after firware upgrade

I just upgraded by E71 to the latest software version. The upgrade went without any issues. After the upgrade I realised that t had removed all my contacts - so I had to restore my backup(I restored the SETTINGS as well). I was using a app for my 'WiFi' (for prioritizing my access points) and after the firmware upgrade - I could not see this app at all. The following are my issues now:
1. I cannot connect to my home wifi(WEP) - it was fine before the upgrade. The first time it says - 'Connection not available' and every subsequent time it irritates by showing 'WLAN already active. Please close the connection and retry'.
2. I have tried to restore the factory settings and it still does not work.
3. I have renamed my Access point to the ones that the app was using - still no luck.
So, what are my options now? Can somebody please help? I never thought a small software upgrade could spoil my whole evening!

Hello,
I have just had EXACTLY the same problem.
I have a Nokia E71 and it was working OK before the upgrade. I just used the latest Nokia Updater and latest nokia pc suite to upgrade to 500.21.009.
The upgrade performed perfectly, and after the upgrade I restored my backed up data.
I have the exact symtpoms as psankar. I have factory reset the phone and tried again. Same problem.
Connection not available, and then connection already active. Small Wireless icon appears at top right of screen, and stays there, but there is no active connection in connection manager.
The only way to remove the wifi icon and to get the phone to attempt to reconnect is to power off the phone, but then on reconnectig then you get connection not available and then the whole cycle begins again.
Help appreciated
TIA
Alex

Home Hub Type A new firmware

I note the following message posted by Admin:
Home Hub 3A firmware version 4.7.5.1.83.8.94.1.11 is being rolled out gradually, we started last week. This firmware includes bug fixes for the following issues that have been raised on the forum over the last few months (and longer):
Bug fixes for loopback functionality
Fix for dual boot Windows and Linux Ubuntu machines where previously it wasn't possible to obtain an Internet connection if you switched to Linux OS
Optimisation of Smart Wireless
You'll most likely receive the update before the end of January but we're taking our time with the rollout so it goes smoothly, fibre hubs will be first followed by adsl. We'll come back and update you if it's going to take longer to get everyone's 3A updated.
Whilst any improvements to functionality are welcome, I note that there is no mention of a) correction of the 'time bug', which of course has temporarily gone away since the clocks went went back in October; or b) any corrective action in relation to the mystery of the internittent slow speeds through the Type A's LAN ports i.e. wired speed dropping below 10mbps requiring a hub reset to restore. Any information in respect of these two bugs would be welcome especially the LAN speed issue which appears may be a hardware fault requiring a change to a type B hub!

this post by Stephanie confirms that 10mb problem will be fixed in update - although not mentioned in Stephanie's upgrade post
http://community.bt.com/t5/Other-BB-Queries/HomeHub-3-LAN-speeds-only-10Mb/m-p/691362#M35575
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

No power after firmware upgrade on nomad jukebox zen xtra

I have the nomad jukebox zen xtra 30gig that froze up over a year ago after i tried to install the firmware upgrade. After the unsuccessful attempt, the mp3 player stopped working.... I mean no power at all. I've changed the battery and recharged the battery from an outside source...still no luck. I can't even try any of the suggestions anyone gives on this site because I have no power.Does anyone have this problem? More important, does anyone have this problem and know of a solution?I've already set my pc back to wmp 0, I have the firmware on the desktop waiting. Now all I need is some power on this unit so that i can try some of the suggestions that seems to be working for people. Thank you

I have the same problem too, but my unit is a?Creative Normad Junebox Zen Xtra 40GB. I was trying to find a solution to my problem when I read about your problem. I have pressed the reset button, on / off switch, removed the battery, reinstalled the battery, and nothing seems to work. I was hoping you?might get a solution to this problem, so that I might be able to fix my MP3 player. If I hear of a solution, I will let you know, thanks for sharing. Issue:? While updating the firmware to the Zen Xtra 40 GB, the unit powered down and?has never came on again. There seems to be no real reason why the unit should not power up. The battery and the AC adapter are working correctly. I am very disappointed in Creative...

No contacs after firmware upgrade on N70

Hi
I did a firmware upgrade yesterday on my N70 using NSU. Of course I did a backup using the uptodate Nokia PC suite. After the firmware upgrade I saved the data back to the phone aagin using the Nokia PC suite. Everything looks good except that no contacts are there.
I did the upgrade again just to make sure that everything went OK with the same result.
Can some help or has the same problem?
Firmware V 5.0638.3.0.1 18-09-06 RM-84
PC Windows XP SP2
Nokia PC Suite 6.82.22.0
NSU 1.2.0en
Best regards
Chris

not sure about your PC Suite version but this has been well documented in these forums and I had the same problem and with N70. I think it was mentioned as a PC Suite issue, or a combined PC Suite issue N70 issue with many people reporting it. Anyway nothing you can do but enter your contacts or transfer from another phone

Home Hub 5 VPN issues after firmware upgrade

Similar Messages

Maybe you are looking for