Home hub 5 will not connect to second user on vist...
I have a pc with vista o/s I want to connect to a BT Hub 5 via TP Link to wifi. There are 2 user accounts set up on the pc. I have configured TP link to connect automatically on both user accounts. When user A logs on the connection is made - albeit rather slowly. However when user B logs on there is no connection and user B has to wait ages before being able to manually connect. It makes no difference whether user B logs on from boot up or after switching from user A. Am I missing something? Can I connect without using TP Link?
Welcome to this user forum.
What do you mean by "via TP Link to wifi"?
You would normally connect directly to the HH5 using the wireless card in the PC, or by using an Ethernet connection.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
Similar Messages
-
HP Color Laserjet CP1215 on XP home network will not print from second computer.
Win XP SP3 home network with two computers and one HP Color Laserjet CP1215 printer(USB) that is shared. Computer one prints just fine, but second computer cannot print.
Print job goes to the queue and says "printing" and stays there for about two minutes and then says "error - printing" and then I have to delete the print job from the print queue.
Downloaded latest CP1215 print driver and installed it to second computer, added printer just fine. No errors until the print job enters the queue. Downloaded the CP1215 Diagnostic Utility, but it will not work on second computer. Have not tried it on first computer when job errors.
Message Edited by remleys_west on 06-23-2009 10:29 AM
Message Edited by remleys_west on 06-23-2009 10:35 AMThe Firewalls are disabled and from my laptop you can view all of the shared
Folders on the Desktop with the CP1215 attached via USB.
When I issue the print from my laptop that is on the same network, you see the
print file show up in the CP1215 print queue of the Desktop the CP1215
is USB attached to and then disappears about 15 seconds later. Here is
how it appears on in the Desktop CP1215 Print Queue before it disappears
Doc Name Status Owner Pages Size Submitted Port
E-mail print Printing Guest 1 547 KB 2:00pm 08/26/09 USB003
I've also download/installed the latest drivers. When I reinstall the CP1215 on my laptop from
the Desktop, the "PRINT TEST PAGE works from the Laptop but then all print commands after
that do not work.
I see from my Google search I'm not the only one having this problem
ANY IDEAS what to try next?
Wes -
InDesign CS3 will not open for second user
I am running InDesing CS3 on a iMac 10.4.11. InDesign, Photoshop and Illustrator all open for my admistrative user account. I recently created a second user account that is unable to open InDesign even though Photoshop and Illustrator open just fine. I checked the permissions for all three programs and it appears that they are all set exactly the same. Does anyone have any idea why I am only able open InDesign for my user account but not for this new user account.
~Thank You
Andrew5.0.3 should not have installed after 5.0.4 (that's a problem with the installer), and it may have added problems. First things to try, though, before we get down to uninstalling and reinstalling again, are trashing the prefs (Replace Your Preferences), trying a new user account, and starting with extensions disabled (hold down the Shift key when you boot).
If it comes to reinstalling again, you should probably also run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3) before reinstalling, and make sure you have the correct update which you can download again from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4029 -
Workflow will not run for second user.
I've created a workflow that simply resizes photos and all works fine until I log in as the other user try to run it and it stops saying check properties. I imagine this is some kind of permission issue but I've made sure there is access to the directory where the files will write to and added read/write to the app itself and still nothing. Any ideas?? Cheers
Just to clarify, I created the workflow with User A, logged in as User B using photos that I had uploaded with User B so it already has read/write permissions. I've copied files to the target directory to make sure that works, and it does. Seems like it's all in place, but obviously somethings amiss!
-
IPod shuffle 4th generation will not connect to iTunes.
iPod shuffle 4th generation will not connect to iTunes. Windows Vista and iTunes, all updates current. Cables secure & connected. Device driver will not load. iPad will connect when tried with several other computers. When I try to connect it will hang iTunes until I re-boot. iPad does NOT appear in Windows Explorer either.
Oh, so the iPad DOES work fine connected to the same computer and the same port. I thought you said it did not in the first post, but maybe you got that working (or I misunderstood before).
NOTE: When things are working properly, the shuffle will not appear in Windows Explorer (except when actively syncing), unless you have Enable disk use turned on for the shuffle. So not seeing it in Windows Explorer may not be a problem.
Is this shuffle a new purchase... so it did not previously work for you on this computer? If so, make sure that the shuffle end of the USB cable is fully inserted into the headphones jack. The fit can be tighter than expected, and it may seem connected, but is not. For a surprising number of people, this was the problem.
In iTunes, is the sidebar (along left side of window) visible. If it is hidden, from the iTunes menu bar, under View, select Show Sidebar. When there are no devices connected, the heading DEVICES should not appear in the sidebar. When you connect your iPad, DEVICES should appear, with the iPad listed below. If you connect the shuffle, it is be added to the list under DEVICES. To confirm, you do not see the shuffle listed there under DEVICES, when it is connected?
When you connect the shuffle, does its light on the shuffle do anything? -
My new Iphone will not connect to my home wi-fi, unless I am standing beside the router. Why is this and how do I fix it? I have previously connected it to another hub before trying to connect to my home wi-fi. Would this of had an effect?
If you have connected to other wi-fi successfully, then your wi-fi should be working. Try power cycling the router. Disconnect it from power for about 30 seconds and then restart it. After it has come back, try connecting again.
-
My iPad will not connect to my home wi-fi network?
My iPad will not connect to my home wifi network? I tried turning off wifi on the iPad, & turning off the device itself. I also tried turning off my router. Today I tried re-setting wifi on the General section of Settings. Nothing seems to work.
This occurred on Sat. when I was trying to download books from a public library. I lost the wifi connection, & it would never join the network again, so I told the device to Forget this Network.
I have another iPad2 which connects to my wifi just fine. The iPad that doesn't connect, does connect fine to other networks.Have you tried a Reset of Network Settings on the Device...
iPad User Guide iOS 5
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
Also. Have you tried a Reset...
Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons. -
IPhone WiFi will not connect to home network.
iPhone will not connect to home network. WiFi is on and correct password is entered. iPhone error msg says incorrect password. Reloaded network software and did not activate password but iPhone still shows network as locked.
Some people who experience issues connecting to or even seeing there Wireless network should follow these steps.
These steps are just a guideline and its not 100% that it will fix your issue.
Mainly, if the issue persists, its possible there is an issue with your iOS settings or a hardware failure within your iPhone or iPad, specifically the Wifi adapter.
You would want to follow these articles to do a reset & restore prior to saying it is a hardware issue.
#1: Reset: http://support.apple.com/kb/HT1430
#2: Restore: http://support.apple.com/kb/HT1414
You will need to access your Admin control panel for your router.
If you have an Airport Extreme BaseStation, you just need to open the Airport Admin Utility found in Applications > Utilities Folder.
Enter your credentials and you will have access to the settings from there.
For a PC: Do NOT use the CD that came with your router. That is used for people who do not know how to setup a router properly and these settings will not be available for you in most cases.
If you are using anything other than an Airport BaseStation:
Open a web browser:
In the address bar, type:
192.168.1.1 (Mainly used for Asus, Linksys, etc) or 192.168.0.1 (D-link,Belkin)
How to figure out what the IP address is to type in?
Windows:
Hold down the windows key, then press R. This brings up the run box. In that box type "cmd" (without the quotes) and press enter. In the black box that pops up, type "ipconfig" (without quotes) then hit enter. Your default gateway is the IP address for your router. It will start with 192.168.....
Take that number and put it into the address bar in your browser and hit enter. It will then ask you for a user name and password. For linksys, it's admin for both. If you have another brand, just google "default password for ******" replacing the asterisks with the brand name of the router. Once you have entered the correct user name and password, you're there.
Mac:
1.From the Apple menu, select System Preferences.
2.In System Preferences, from the View menu, select Network.
3.Select the appropriate port. For example, choose Ethernet for broadbandconnections, AirPort for wireless, or Internal Modem for dial-up.
4.Click Advanced... , and in the sheet that opens, click the TCP/IP tab.
The number next to "Router:" is your default gateway.
Once you get into your admin panel do these setting changes.
1.On the router change the channel for the 2.4mhz band to channel 1, 6, or 11 (recommended), rather than auto.
2.Also set that channel width to 20hz only, rather than 20hz or 40hz (Auto)
3.Make sure Security is set to WPA/WPA2-Personal. Anything else will cause issues. (of course, make sure you know your password for security)
4.Make sure to Apply/Save these settings. Sometimes the wireless connectivity will go out during this change and will come back on within 15-30 seconds.
5.On the iPhone/iPad go to Settings > Wi fi > click the blue arrow beside the network > Select Forget network
6.Go to Settings > general > reset > reset network settings
7.Power the phone off and on. Connect again
For additional assistance in troubleshooting Wifi connection problems go here: http://support.apple.com/kb/TS1398 -
My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly. -
I have OS 10.8.2 and use wireless at home just fine.
When I visit a friend with only a cable modem internet my Mac Book Pro will not connect.
I see that the Mac Book Pro is picking up the internet when I check the internet preference section but it will not open Safari.
What do I need to do connect via a cable modem?You need to power off the modem for 15-30 seconds, then power back up and then connect. The modem is remembering the last connection (your friend).
-
My ipod (version 6.1.3) was connectiong to my home wi-fi just fine until I uploaded new music from my itunes via my laptop. Now my ipod and my iphone will not connect to my wireless network. I've uplugged my wireless network and reset my network settings etc... nothing seems to work. Please help!
Does the iOS devices connect to other networks?
Does the iOS devices see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Since both iPhone and iPod stopped connecting I suspect a problem with your network. -
My ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wifi.
- Reset the iPod. nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
I have a 3rd Generation iPod that will NOT connect to our internet connection at home. Message on screen keeps saying it is 'unable' to connect. Yes I have already reset to default factory settings, No we do not have our service encrypted or password protected, anyone else have any other viable suggestions as to how to fix this problem?
Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!
try this.
get back into your router's settings and start deleting devices that are not connected to your router.
you can also delete the ones that are connected - they'll connect again.
on the DHCP side of it, increase the amount of users that can connect/log in to your router.
see if that sorts it out for you.
good luck. -
I recently purchased an iPad after using a laptop and PC for years. I use a wireless router connected to a DSL line at home and have been using the iPad without difficulty for about a month and tonight it will not connect to the Internet. There is not a problem with the DSL or router. I am using the laptop now. Could someone please give this eectnically challenged individual assistance?
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
Maybe you are looking for
-
Customer/vendor could not be determined for intermediate document
does any one know how to solve this problem, i got this error for an inbound idoc 820 (remmitance advice).
-
Screen Saver - can't use any iPhoto images
I know that there have been reports of the mosaic screen saver with iPhoto not working, but I can't get any type of photo screen saver working with iPhoto. If I click on an iPhoto event, album or just iPhoto, I get the spinning ball for about 30 minu
-
Sequence number throwing error.
Gurus, I am currently at the schema "rawfeed" in "dev" database. I created a DB link to the "prod" database to the schema 'prod_schema" 1) select distinct job_group as grp from prod_schema.test_table@prod. Gives me result as: CIAZ ID0PA IDS1R IEMRR2)
-
Error in FI Posting for J2IUN - Utilization
I am doing J2IUN (CENVAT Utilization) I gave all the input and executed. It went in and i selected amount which needs to be paid. Then i simulated it and its perfect. When i clicked on SAVE, it gave error: Error in FI posting 20100721 Message no. 8I2
-
Oracle Lite Mobile Server Standalone Version
We are planning to run the Mobile Server in the DMZ and wanted to run the Mobile Server as standalone on it's own box. I found in the documentation that Oracle does not recommend to run the standalone version in production. Oracle recommends that the