Home Hub and RJ45? not working correctly

Recently i had a few problems with the Wireless on the Home Hub 3, so i switched and used an RJ45 and boy my speeds shot from 30-40mbs to 77mbs i was all happy, then the upload part of the speed test came along and it spent forever trying to do an upload test then came back error.  I refreshed the page and no internet or webpage would load, so i trouble shoot the network and it works again so i try again and the same thing happens any time i try to upload my connection drops from the hub and i have to troubleshoot to fix the problem, i heard somewere that the homehub is funny with an RJ45 =/ i am not wanting to go back to wireless scince the i get faster on a RJ45 is their a way to fix this Issue ?

Hi
All 5 PCs, the vision box & printer here are hard wired using Cat5 cable & RJ45 connectors and in 6 years we have never had a problem.
I make my own cables and they are a bit fiddley, so despite looking fine the pins don't always connect properly and you get all sorts of issues especially if the cable moves.
My recommendation would be that you firstly change the cable, preferably to one that you know works properly.
Regards
Tim

Similar Messages

  • I have an iPhone 4 on contract and its not working correctly , what should I do ?

    I have an iPhone 4 on contract , I only have this 5 and a half months and the iPhone is not working correctly and i do not have insurance .. What should I do ??

    It sounds like you did not purchase it at the Apple store? That doesn't matter - you can still take it to Apple to troubleshoot it.
    You can also try to troubleshoot it with the help of the folks here - if you want to do that, let me know and I'll ask that your post be moved to the iPhone forum where you're more likely to get knowledgeable answers, ok.

  • T42p vista fn + f3 and fn + f4 functions (turn off screen and sleep) not working correctly

    Hi -- I recently installed windows vista on my T42p.  It works fine except that the fn+f3 and fn+f4 functions do not work as expected.  Before installing the hotkeys driver, the fn+f4 function worked correctly while f3 did not (going to sleep worked, turning the monitor off did not).  I then installed the recommended hotkeys driver.  Now fn+f4 makes the monitor turn off while f3 does nothing ... fn+f4 is supposed to put the laptop to sleep.  On top of this, if i select "sleep" from the start menu, the computer turns the monitor off instead of going to sleep.
    Presumably, the sleep button could still be telling the computer to go to sleep, but the actual operation of going to sleep is now broken?  Just a guess.  Anyways -- anyone know how to resolve this so that fn+f3 turns my monitor off and fn+f4 puts my computer to sleep?

    I've too this problem, but more, my sound mute wasn't worked (for deblock, but it can block it few second before...) 5 days in 5-6 instalation of three version of winxp: winxp ru x64 sp2, winxp es/ru sp3 x32.
    eventually I've found and ran "TPOSDSVC.exe" in instalation directory and it give an opportunity  deblocking the sound volume!!!!!!!!!!!! and I don't need more functions 
    volume levels and brightness adjustment worked well without OSD (before I ran TPOSDSVC.exe) and with OSD.
    and now I don't know worked this bustered sound driver in winxp x64.
    ThinkPad T61 7664

  • Time change for daylight savings and Alarms not working correctly

    we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
    Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

    Read here:
    http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

  • Internal Mail Routing Between HUB servers Is Not Working Correctly

    Howdy, Been scratching my head on this one for a while. 
    First off, running Exchange 2010 Sp3 RU5 across the board. 
    I have attached a diagram of our environment for visual aid. Please take a look as it makes more sense. 
    I have drawn the correct mail flow in black and what is happening in red.
    Forest A Site A, has a dedicated edge, dedicated Hub and dedicated CAS 
    Forest A Site A child domain 1, has a multi-roled MBX,HUB,CAS
    Forest A Site B child domain 2, has a multi-roled MBX,HUB,CAS
    Forest B Site C, has a multi-roled MBX,HUB,CAS
    Mail flows TO child domain 2 just fine, but outgoing mail from that same domain keeps routing through HUB in child domain 1 instead of HUB in forest root domain. 
    The send connector for the organization in Forest A is configured to only send through the dedicated HUB server in Forest A. The Receive connector in Forest A's HUB is also configured correctly. But no matter what i do, mail outgoing from child domain
    2 continues to flow to child domain 1 instead of through the dedicated HUB server. 
    Mail needs to flow so for now i added the HUB in child domain 1 as a source server in the organization's send connector and set up the receive connector in child domain 1 to allow a work around for now. 
    I think this is an issue in the routing group connector but its just a guess. Any ideas? 

    Hi,
    Active Directory IP site links costs are based on relative network speed compared to all network connections in the WAN and are designed to produce a reliable and efficient replication topology. Therefore, in most cases, the existing IP site link costs should
    work well for Exchange 2010 message routing. However, if after documenting the existing Active Directory site and IP site link topology, you verify that the Active Directory IP site link costs and traffic flow patterns aren't optimal for Exchange 2010, you
    can make adjustments to the costs evaluated by Exchange.
    You can use the Set-AdSiteLink cmdlet to assign an Exchange-specific cost to an Active Directory IP site link.
    More details refer to the following articles:
    Controlling IP Site Link Costs
    Set-AdSiteLink
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Clientless VPN and Java not working correctly

    In a recent discovery we found that the newest version of java will not work with our Cisco SSLVPN setup
    We are using an ASA5510 with 8.0.4 IOS version and 6.1.3 ADSM version and most users use an mstsc.exe smart tunnel to rdp into our terminal server farm.
    Our laptops are being imaged with Java 6 update 3 (this works fine) then upgraded to Java 6 update 11, after which the smart tunnel appears to launch but a connection cannot be established. Reinstalling the older version of Java resolves the problem.
    I was wondering if anyone else has encountered a similar problem and found a workaround. Currently, company equipment is not being upgraded to the latest version of Java but personal equipment is a different story.

    To get the old downloader back follow the directions below.
    # In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
    # Click '''I'll be careful, I promise!''', to continue to the about:config page.
    # Filter '''browser.download.useToolkitIT'''.
    # Double click and '''make sure it says true.'''
    # You now have the classic downloader back! Yay!
    Any issues or confused?
    * http://kb.mozillazine.org/About:config

  • PSE 11 - MacOX 10.7.5  Printing Wide Format Printer and Profiles Not Working Correctly

    Macosx 10.7.5
    When I start up PSE11  and go to print I set up the paper size then select a Printer Profile.  When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
    I then go and try to print it again.   Now it all works as it should beutiful colours and spot on.  all other print following this works.
    Then I shut down PSE11.   Start it up again.  Guess what  first print is a mess again.   all others after are fine.
    I uninstalled PSE11, deleted prefs.  and reinstalled PSE11.    Same thing..   first print a mess all others ok.
    the issue can be replicated consistantly......
    no problems with PSE10 or PSE9
    any suggestions?????
    cheers elo

    Thank You for your suggestions.
    I have been printing using PSE for over  14 years going back before the term PSE came up.  I have done this professionally using profiles from others and those I generate myself..
    All the things you  mentioned have been done.
    The main  point missing in your suggestions is   It is only the first print every time I open up PSE11 that does not work...
    at completion of print I immediately go back to the file command and say print and then bypass all settings and print again.   this time and every other print aafter are perfect...      I did not change one single setting...
    I know about printer and adobe settings etc.     but thanks for going through the list it was a good reminder of how to remember everything sometimes we rush and forget something...
    Finally    It works PSE6, PSE9, PSE10, CS5, Lightroom 4.   I think I have the settings right......
    Any suggestions for how to get PSE11 to force the settings for the first print would be appreciated..
    Only thing I have not done is upgrade to the latest version of the epson driver.  Released less than a month ago to provide support for mountain lion.(iam only on lion)  Maybe just maybe???   you never know.   Will try this when I finish by next batch of prints.
    I will back up as I do weekly...    Still have the old driver from way back in release 10.5.8   will try to fire up to 10.5.8 and see what happens....
    cheers elo
    Message was edited by: Elo Laugesen

  • Apple tv - home sharing and AirPlay not Working.

    today i got a apple tv2 and i have the ipod touch 4g and itunes on my laptop, did itunes update 10.3.1 losted my apps and music from itunes but some how back them up. updated my ipod touch to the 4.3.3 and today did the same with my apple tv 4.2.2. the thing is when i open itune and turn on home sharing and do the same on my apple tv, i cant see my music files from itunes or movies and the same if i try it on the ipod apps,cant pick up the apple tv or itunes. i dont no why i cant fix this, been doing this for 8 hours now. can some one help me out??

    verify you you set up home sharing correctly:
    iOS: Setting up Home Sharing on your device
    also see Troubleshooting Home Sharing with Apple TV (2nd generation)
    and Troubleshooting Home Sharing

  • Keyboard and mouse not working correctly after installing Windows 8.1

    I was forced to upgrade my computer to Windows 8.1. My keyboard worked fine until the sytem did a reboot. Numbers on keypad stopped typing and letters were being capitalized when the caps lock was off and the numbers across the top will only type the symbol above the numbers. 
    I looked up this problem and it seems I need to enter UEFI settings and disable Intel XHCI mode. When I get into the UEFI settings I cannot make any selection from the startup menu. Both my keyboard and mouse stop working. 
    Any suggestions?
    This question was solved.
    View Solution.

    Thank you for posting a response. Fortunately, I didn't have to try your solution because the computer resolved itself. 

  • Email counter and connection not working correctly after updates

    How do I fix the email counter on my dock bar it shows that I have 214 unread and they have all been read?
    Also, my email is constantly asking me to enter my password to establish connection this is after I have been working in email and sending and receiving emails fine.  Does anyone have a fix for this?

    I did find the problem with the counter.  It had to do with my Gmail account not my other email account.  I still haven't found the answer to the question of my connections to my email accounts are dropping and need me to enter my password though.  I have made sure that the passwords is correct that is entered.

  • QueryExecute and QuerySaveAsFolder not working correctly

    Hi,
    I have a strange problem using the Filter Tokens with QueryExecute and
    QuerySaveAsFolder.
    I create a filter using the following token commands.
    FilterCreate(150;FALSE)
    FilterGroupBegin(17833584;316)
    FilterSetText(17833584;331;"DM*"; 225; "DMS nummer")
    FilterGroupEnd(17833584)
    EnvPrefFullName()
    QueryExecute(;17833584;4;654;Libraries:"PODOM.UTR-DMS01.DMS001";;):
    When running this on my development test installation of GW 7.0.1 the
    result window opens and the result is displayed. When looking at the
    properies of the search it tells me correctly '...where DMS nummer
    contains "DM*"'.
    When trying the same software on the production installation (same versie
    of GW client) the result window opens and nothing is dispayed, teh
    properties showing an empty search.
    When using the QuerySaveAsFolder like this
    QuerySaveAsFolder("Basismap van ddinformatica\Dossierkast\Zoek resultaat
    (12.43.52)";"DDI document
    selectie";0;1;"";17833584;4;654;;Libraries:"PODOM. UTR-DMS01.DMS001";;)
    Again on the development PC everythink works like intented, on the
    production PC the result is empty. But the properties of the search are
    looking correct '...where DMS nummer contains "DM*"'. So ther should be a
    result. When I open the advanced function of the search, change nothing
    and click Ok, the result is displayed correctly.
    Can someone explain to me what I'm doing wrong? As far as I understand
    the token commends are correct.

    Hi again,
    I talked to Tommy last week at the GroupWise DevLab in Brussels, and he
    ask me to upload a sample code:
    Form:
    object Form1: TForm1
    Left = 1020
    Top = 562
    Width = 388
    Height = 306
    Caption = 'Form1'
    Color = clBtnFace
    Font.Charset = DEFAULT_CHARSET
    Font.Color = clWindowText
    Font.Height = -11
    Font.Name = 'MS Sans Serif'
    Font.Style = []
    OldCreateOrder = False
    Position = poScreenCenter
    PixelsPerInch = 96
    TextHeight = 13
    object Label1: TLabel
    Left = 8
    Top = 12
    Width = 48
    Height = 13
    Caption = 'Library ID:'
    end
    object Label2: TLabel
    Left = 8
    Top = 36
    Width = 22
    Height = 13
    Caption = 'Field'
    end
    object Label3: TLabel
    Left = 8
    Top = 60
    Width = 41
    Height = 13
    Caption = 'Contains'
    end
    object Edit1: TEdit
    Left = 64
    Top = 8
    Width = 121
    Height = 21
    TabOrder = 0
    Text = 'domddi.poddi.CNVPost'
    end
    object Edit2: TEdit
    Left = 64
    Top = 32
    Width = 121
    Height = 21
    TabOrder = 1
    Text = 'DMS nummer'
    end
    object Edit3: TEdit
    Left = 64
    Top = 56
    Width = 121
    Height = 21
    TabOrder = 2
    Text = 'CN*'
    end
    object Button1: TButton
    Left = 192
    Top = 8
    Width = 75
    Height = 23
    Caption = 'Search'
    TabOrder = 3
    OnClick = Button1Click
    end
    object Button2: TButton
    Left = 192
    Top = 40
    Width = 75
    Height = 23
    Caption = 'QueryFolder'
    TabOrder = 4
    OnClick = Button2Click
    end
    object Memo1: TMemo
    Left = 8
    Top = 80
    Width = 361
    Height = 185
    TabOrder = 5
    end
    object cbUseGroup: TCheckBox
    Left = 280
    Top = 8
    Width = 89
    Height = 17
    Caption = 'Use Group'
    Checked = True
    State = cbChecked
    TabOrder = 6
    end
    end
    Source:
    unit Unit1;
    interface
    uses
    Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls,
    Forms,
    ActiveX, ComObj, Dialogs, StdCtrls;
    type
    TForm1 = class(TForm)
    Label1: TLabel;
    Edit1: TEdit;
    Label2: TLabel;
    Edit2: TEdit;
    Label3: TLabel;
    Edit3: TEdit;
    Button1: TButton;
    Button2: TButton;
    Memo1: TMemo;
    cbUseGroup: TCheckBox;
    procedure Button1Click(Sender: TObject);
    procedure Button2Click(Sender: TObject);
    private
    procedure Search(SaveAsFolder: Boolean);
    public
    end;
    var
    Form1: TForm1;
    implementation
    {$R *.dfm}
    procedure TForm1.Search(SaveAsFolder: Boolean);
    var
    ReturnString: String;
    FilterHandle: String;
    CommandStr: String;
    user: String;
    Commander: Variant;
    Res: Integer;
    begin
    Commander := CreateOleObject('GroupWiseCommander');
    Res := Commander.Execute('FilterCreate(150;FALSE)', FilterHandle);
    if Res = 0 then
    ShowMessage(ReturnString);
    Memo1.Lines.Add('FilterHandle : ' + FilterHandle);
    if cbUseGroup.Checked then begin
    CommandStr := 'FilterGroupBegin(' + FilterHandle + ';316)';
    Memo1.Lines.Add(CommandStr);
    Res := Commander.Execute(CommandStr, ReturnString);
    if Res = 0 then
    ShowMessage(ReturnString);
    Memo1.Lines.Add('ReturnString : ' + ReturnString);
    end;
    CommandStr := 'FilterSetText(' + FilterHandle + ';331;"' + Trim
    (Edit3.Text) + '";225;"' + Edit2.Text + '")';
    Memo1.Lines.Add(CommandStr);
    Res := Commander.Execute(CommandStr, ReturnString);
    if Res = 0 then
    ShowMessage(ReturnString);
    Memo1.Lines.Add('ReturnString : ' + ReturnString);
    if cbUseGroup.Checked then begin
    CommandStr := 'FilterGroupEnd(' + FilterHandle + ')';
    Memo1.Lines.Add(CommandStr);
    Res := Commander.Execute(CommandStr, ReturnString);
    if Res = 0 then
    ShowMessage(ReturnString);
    Memo1.Lines.Add('ReturnString : ' + ReturnString);
    end;
    if SaveAsFolder then begin
    Commander.Execute('EnvPrefFullName()', User);
    //User := 'Basismap van ' + User + '\Dossierkast\Zoek resultaat (' +
    FormatDateTime('hh.mm.ss', now) + ')'
    User := User + ' Home\Cabinet\Zoek resultaat (' + FormatDateTime
    ('hh.mm.ss', now) + ')';
    CommandStr := Format('QuerySaveAsFolder("%s";"DDI document
    selectie";0;1;"";%s;4;654;;Libraries:"%s";;)', [User, FilterHandle,
    Edit1.Text]);
    end else
    CommandStr := Format('QueryExecute(;%s;4;654;Libraries:"%s";;)',
    [FilterHandle, Edit1.Text]);
    Memo1.Lines.Add(CommandStr);
    Res := Commander.Execute(CommandStr, ReturnString);
    if Res = 0 then
    ShowMessage(ReturnString);
    Memo1.Lines.Add('ReturnString : ' + ReturnString);
    end;
    procedure TForm1.Button1Click(Sender: TObject);
    begin
    Search(False);
    end;
    procedure TForm1.Button2Click(Sender: TObject);
    begin
    Search(True);
    end;
    end.

  • HFR Range from and to - Not working correctly for hierarchies?

    Hi All,
    Can anyone help me with my below issue relating to ranges in Oracle’s Hyperion Financial Reporting Studio tool.
    The issue I’m experiencing is that when I create a report and use the ‘Add Relationship’ -> ‘Range’ option for my month dimension, the correct months are returned as long as the start month and end month are not the same.
    In our setup we have 2 month hierarchies, one for the fiscal year (July to June) and another for the calendar year (January to December). The problem that I’m noticing in the report, is that when I enter a range from July to July, that instead of returning July, it returns July, August, September, October, November, December, January, February, March, April, May, June, July. My though it that it is looping through both the fiscal and the calendar hierarchies to return the range, instead of only the fiscal hierarchy. Both these hierarchies have the same members, however ordered differently.
    Does anyone know of a way to resolve this within HFR?
    I noticed that when creating the range, there is an option to ‘select a hierarchy’. At the moment there is only 1 choice ‘ Period’, however I’m curious if I could create and link a hierarchy to the fiscal hierarchy, that this might resolve the problem?
    Any ideas?
    Thanks,
    Lance

    Hi Lance,
    IIRC Range uses the first (main) hierarchy - so you'll need to move the Fiscal year one to be first in the outline.
    Cheers, Iain

  • Dreamweaver and Fireworks not working correctly

    I am taking a DW8 class. I have MANY photos I want to use
    fireworks for. Installed free 30 trial of DW8 and Fireworks from my
    books CD. Did what DW8 said in creating web photo. Used Fireworks
    BUT when I clicked on the photo to enlarge I got the black box
    around it saying I could enlarge it NOT view it like a picture
    show. What I want is to have all photos per event show up and then
    let people click on the photo to see either that ONE OR ALL but
    full screen. What do I need to do? Should I try downloading the 30
    trial from this site for both programs instead of the CD from the
    DW8 instruction book?

    Hi
    The software crashes or freezes.  Fireworks will only let me save an item twice, after that, I get an error message that tells me I do not have permission to save that item because it is locked, so then have to save into a different folder or directory, crazy.
    When trying to uninstall in control panel, will not open the uninstall, think some kind of permission problem.
    I may just do a system restore back to how the computer was purchased, then install all programs again.............  See if that works first.  None of the other programs are doing this; however, just Adobe, so not sure what happened, just started working like this out of the blue.............?
    I am going into a long meeting this morning, so can only work on it in the afternoon.
    Thanks for replying...........
    Tracey
    Sent from Samsung tablet

  • RAM previewing and rendering not working correctly

    Hi,
    Today I was just about finished editing a video on CS6 and then when I'm about to add the last effect and render it it stuffs up on me:(. What happens is that while RAM previewing at some point during the loading of the preview it will stop loading, It will then proceed to play the ram preview on loop and when I press a button to stop it a small box pops up in the centre of my screen and the ram preview bar to show what has loaded (the one which shows green for parts that are loaded and blue for cached) turns black and sometimes other parts of after effects turn black. This has happened before and I fixed it by uninstalling and reinstalling After Effects about 6 times. I would do that this time though I would like to know the cause of it and any possible fixes as it is quite irritating. Another thing that may be happening is the RAM usage is slowly filling as I render. This has happened before on my laptop and I did not manage to fix it though it was not related to the first issue that time. The last time when it happened on my laptop the RAM usage eventually filled up to 100% and it would no longer render. I am not sure if it is happening this time as it is still currently rendering though I will update the thread if it does. Finally my render is going very slowly, I am not sure if this issue is realted to any of the above or if it is just the effects I am using though. My memory and multiprocessing settings are using 6 cores of 7 with 2 GB of ram allocated to each with multiprocessing on. My ram allocated for other programs is 6GB. To fix these Issues so far I have tried clearing the cache, purging the memory and image cache, restarting  my computer and reinstalling after effects. My specs are:
    i7 4770k non overclocked
    GTX 780
    G.Skill Ripjaws Z 2133mhz 32GB
    Samsung 840 pro
    Seagate Barracuda
    MSI Z87-G45
    H100i cooler
    Any reply is appreciated
    Thanks in advance
    Sam

    How much experience do you have with AE? Ram preview can be lengthened by adjusting the resolution of the composition window, different parts of the project can be previewed using the work area, and preview length and render time are both a function of composition frame size. Complex, memory intensive effects like particle systems will reduce the render time and the length of a ram preview. Without knowing the details of your composition it's hard to say if you are running into a bug, running out of resources, or experiencing normal behavior.

  • No Export options and Place not working correctly. InDesign CC 2014.

    I cannot place a file into a frame with cmd+d or File > Place.
    I get the preview on the cursor but won't place into a frame which I need to keep the frame effects and size options.
    - Also -
    I am not getting any options on Export - to change the output file type. Seems to be defaulting to PDF (print) in the dialogue box there is no dropdown.
    How do I fix this?
    I don't know how long this has been going on for as I don't use InDesign as much as other programmes but I am guessing since last update. I hate I am paying for this per month and have been sat on the phone and chat for over an hour waiting on a response. It is slowing my workflow down.
    I am fully updated.
    Creative Cloud Suite
    iMac Mid, 2011
    OS X Yosemite
    Version 10.10.2
    Processor: 3.1 GHz Intel Core i5
    Memory: 16GB 1333 MHz DDR3

    Try restoring your InDesign preferences:
    Trash, Replace, Reset, or Restore the application Preferences
    Note: If you're searching for the file as described in this article, you MUST MAKE YOUR HOME LIBRARY VISIBLE. It's hidden by default. In Yosemite or Mavericks, in the Finder, hold down the Option key to select Go > Library.

Maybe you are looking for