Home movies not being shared on iTunes home sharing
I cannot connect home videos om my other mac via home sharing they will not show up on any connected device.
Does anyone know how to fix this issue on Itunes 11.5?
Hello Cws5214,
The following article provides information and troubleshooting steps that can help get Home Sharing working.
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Cheers,
Allen
Similar Messages
-
Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed any mobile programs associated with my non apple cellphone. This seems to have started happening after the last Itunes update I did as I was able to put music on my ipod touch a month or so ago. Is there some way to go back to an older version of itunes? I really have no idea what else to do since I followed every step on the trouble shooting page for windows 8.
I had this problem too and my roommate solved it!
Go to 'Settings'
'Music'
Scroll to the bottom and enter your password to log onto your home sharing
Then connect to iTunes and sync! -
Ipod touch 6.1.3 not being recognised by iTunes 10.7
Just got a secondhand iPod Touch. It is on 6.1.3 and I have iTunes 10.7 running on my iMac 10.6.8. As far as I can see 6.1.3 is supported on iTunes 10.7. I tried the Apple trouble-shooting page but to be honest it wasn't that helpful.
If I set up Home Sharing then I can Home Share using the iPod Touch...which says that I do have connectivity at some level. Just that it is not being recognised by iTunes and so I am unable to load my apps or transfer any music over.Many thanks lllaass
I had gone through the first part without success but had decided not to go through the second stage. But following your recommendation I did just that and it works! -
TS3716 ipod nano is not being recognized by iTunes.
My ipod nano 2nd generation (and working perfectly) is not being recognized by iTunes.
Any suggestions?Does the iPod work OK?
Have you tied resetting the iPod? Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Next would be to place the iPod in recovery mode and then restore via iTunes. If iTunes does not see the iPod then the iPod is not usable. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
Ipod Touch 4th generation 32G not turning on, not charging.
I have used multiple cords on both computer USB and wall USB converters. I let it sit there for over 20 min with each attempt.
It is not being detected by Itunes or my Windows 7 64bit OS. I have tried all 4 of my USB ports (both USB 2.0 and 3.0), with 3 different chargers.
Holding home and power button will not reset.
Tried taking it out of "DFU" mode but Itunes won't detect it, I didn't think that would work anyway.
NO DAMAGE, I have been very careful with it, aside from a few minor scratches. (that you can't even see unless the light reflects them)
My Itunes is up to date, as is my OS.
All I'm getting is a blank black screen. It has been working fine on this computer before. I have no idea what could have happened. I'm at my wits end here.See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod Classic (60GB) Clickwheel is not being recognised in iTunes although the iPod shows in 'My Computer'. The problem started with an error message in iTunes saying "Could not complete sync as devise may have become corrupt" and suggested I restore the iPod to factory settings which I have done several times. I've carried out an error check in the iPod properties. I've completely removed iTunes and all related software components in the correct order and reinstalled version 10.5.3. I have been through the 5 R's numerous times but still the iPod is not being recognised in iTunes. I have Windows XP, I'm tearing my hair out now so any help or suggestions would be great
Try and force iPod into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPod
Note: You need to be patient and repeat the above many times to recover your iPad -
I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode. Anyone know what's going on?
Try and force iPod into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPod
Note: You need to be patient and repeat the above many times to recover your iPad -
my iphone 5 is disabled and is not being read by itunes, itunes is giving me a prompt of my passcode, but that screen is not showing, please help me able my iphone.
+Do a DFU recovery:+
+1. Open iTunes.+
+2. Connect the iPhone+
+3 Press both the home and sleep/wake buttons until the Apple icon appears (ignore the red slider if it shows).+
+4. Continue pressing the home button alone until iTunes sees your phone in recovery mode.+
+5. Follow the prompts to restore the iPhone.+
If not, take it down to mobile dealers that can reset your phone for you. All data will be lost. -
Why isn't my iPod 6th generation not being recognized by iTunes?
Why isn't my iPod 6th generation not being recognized by iTunes?
Did you alresady try these suggestions? iPod not recognized in iTunes and Mac desktop and iPod not appearing in iTunes
-
My ipad (mini) and ipod are not being recognised by itunes?
When connecting both my ipad(mini) and ipod(7th gen) they are not being recognised by itunes. I last connected just over a month ago and everything was fine. When I last connected I also connected my old ipod(3rd gen) to add new playlists beforing giving to someone else. When I first plugged in I got a message saying that the cable was not Apple authorised - both my cables are cables supplied with my ipod/ipad so came from Apple? When I run diagnostics it says
"Most recent devices not currently connected, - iPod Nano (3rd Gen) and iPad Mini running firmware 6.1.3" This is the first time I have tried to connect since updated my iPad with IOS7? Please help I wanted to put Christmas playlists on both devices.....!Device Not Recognised > http://support.apple.com/kb/TS1538
-
IPhone not being recognized by iTunes
My iPhone is not being recognized by iTunes. I have iPhone original version with the latest software OS update. The phone was reset because of unrelated problems, and I need to connect to iTunes for it be operational! iTunes 9.1 on my computer... my iPad syncs with no problem but the iPhone is not even showing up as a device on the iMac or MacBook!
I have followed the steps on the Apple Support website, but the problem persists. What to do next?
thanksYour computer detail provided indicates you have a Mac and the link you provided is for Windows - at least for the software conflicts portion the link went directly to, although some of the troubleshooting steps are similar.
Here is the link for OS X.
http://support.apple.com/kb/TS2050 -
My Ipod 7th gen is not being recognized by itunes and Windows 8.1.
Hello. My ipod 7th gen is not being recognized by itunes and Windows 8.1. When I connect my ipod to my computer, itunes will open automatically and a message bar below will appear:
I have followed all the instruction in the support and itunes still unable to deted my ipod. The funny thing is, if i uninstall itunes, Windows 8.1. will detect my ipod but when itunes is installed, both itunes and windows 8.1. cannot detect my ipod. Thank you in advance for all your help.the message box says like this:
An ipod has been detected but could not be identified properly. Please disconnect and reconnect ipod, then try again. If the problem persists, unisntall itunes then install itunes again. -
My Ihone 4s is not being recognized by Itunes.There seems to be no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!
Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.
-
My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.
At present I have no power to the Gen 7, so need to get some power to it I think. I pressed the buttons as you suggested, but nothing is showing up at this point. Thank you for your response as the more I can rule out before I take it back the better I think.
-
My iPad mini is not being recognised by iTunes 12, can anyone help?
Version 8.1.2 iPad mini 1st gen
I am unable to sync as it is not being detected by itunes
i am using a windows pc windows 7Hello there, fuuthat.
When your iOS device isn't recognized or detected in iTunes, the following Knowledge Base article offers up some great, in-depth steps for troubleshooting:
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Maybe you are looking for
-
We suddently started seeing some slow inserts on some test boxes. All boxes are on RedHat 5 and 10.2.0.1. We have a multi-tier web application conencting to the DB using connection pool and inserting about a 100000 records in a table. They first do a
-
Urgent: Error in magrating assets by LSMW
When I use LSMW - convert data, the system end up a ABAP dump. What does it mean? Runtime Errors UC_OBJECTS_NOT_CONVERTIBLE Date and Time 2008.05.23 10:28:56 Short text Data objects in Unicode programs cannot be converted. 发生了什么
-
Hello Experts, I have need to change BOM Status in CS02 to be inactive when we save it . The steps I do are :-- 1. Goto CS02.enter material , plant BOM Usage 2. Click on header level ,and now whatever be the BOM status , but when we go to save i
-
Multiple SRM Issues (Org, SC, Attributes)
Hello, Please help me troubleshoot these issues. I have all the Product Hierarchy, Category replicated from ECC 1) But I see nothing in COMMPR01 2) I am not able to assign Product Category in Extended Attributes tab 3) When I try to "Free text" procu
-
change to english on pro8600