Home movies on dvd are not recognized by I movie

Why is my home made dvd not recognized by imovie? I tried handbrake and even that didn't recognize the source

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion or later:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion and Mavericks even though they have it preinstalled.) You don't have to install QuickTime 7.

Similar Messages

Hard drive and dvd are not recognized in the setup menu, what could be wrong?

The hard drive and dvd drive are not recognized on the setup menu for my Pavilion a4316f desktop computer. Could it be a failure of the controller? Can a PCI controller be used to replace the mother board controller?
This question was solved.
View Solution.

The Recovery process would erase you hard drive, and attempt to install a fresh OS. Decidely a bad choice if you wanted to save your data files. The Recovery sets are "tattoo" with the BIOS hardwafre configuration. It will not, IMHO, recognize the PCI Sata card.
You mentioned the Recovery program on the hard drive actually requested the installer of the controller (PCI card). Try running from that.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Dvd are not recognized

Hi there
in many communities iMac users report the same problem I have, but no clear solution found so far.
My specs:
- iMac 27" (from mid 2010)
- 3.2 Ghz Intel Core i3
OS: OS X 10.9.1 (13B42)
DVD-ROM OPTIARC
DVD RW AD-5680H, Revision: 3AHB
Issue:
- Many original DVD's are not recognized anymore...since a few weeks, before almolst no DVD was rejected.
-> It seems the more DVD's I try, the less my iMac can read....
No configuration changes, I've only made the regular oficial updates coming from Apple.
Any solution ideas, but cleaning the lenses? Much apreciated!

Have you tried a lens cleaning disk. One that uses dry brushes and no liquids? Have you looked into the OS X Mavericks: Use Apple Diagnostics or Apple Hardware Test?
OT

DVDs Are Not Recognized

I updated my PowerMac (2.0GHz G5, 3GB RAM, LaCie dual-layer DVD burner) to 10.5.6. I tried burning a DVD (copied from a VHS tape and converted to a VIDEO_TS folder, and burned via Toast), and everything was fine, but it crashed halfway through burning the DVD. That's happened before (ever since switchig to Leopard), but not recently. So, I put in another DVD+R and the same thing happened. So, I restarted the machine, and now it won't even recognize that there's a disk in the drive.
So, I powered down and restarted the machine and the same thing happens. I also tried DVD+R DL, and they're not recognized, either. I haven't tried putting in a DVD movie yet, though.
Any ideas?
TIA

Thanks for the replies.
I tried to mount blank DVD-R and DVD+R discs with sudo mount /dev/sr0 /mnt/CD.
I keep getting the answer: mount: no medium found on /dev/sr0.
On some discs it returns with:
mount: wrong fs type, bad option, bad superblock on /dev/sr0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
but I have not been able to find a pattern for when it will do this.
I ran smartctl -T permissive -i /dev/sr0 with a disc in the drive and got this response:
=== START OF INFORMATION SECTION ===
Vendor: MATSHITA
Product: DVD-RAM UJ-832
Revision: 1.00
Device type: CD/DVD
Local Time is: Fri Jan 31 06:18:51 2014
device Test Unit Ready [medium or hardware error (serious)]
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
Temperature Warning: Disabled or Not Supported
My first thought is that the two thinkwiki pages that I posted have links to firmware updates far past 1.00. However, I still can't tell which drive I have.

Context Menu: Facebook Home (News Feed) Images Are Not Recognized

You only see context menu items if they apply to the situation. If you right-click on an image, you will see items such as: View Image, Copy Image, Copy Image Location, Save Image As, etc. There is no exception for images which are a hyper-link. But in Facebook Home (News Feed), images of posts do not apply to the situation. Whereas images of Users' Profile Pictures (little images shown next to user's name in posts and in comments) DO apply.
So if you right-click on an image of a post, you won't see items such as "Copy Image Location". You will have to click on that image, and in the next page (the full-page preview of the post) right-click on the image in order to copy its location or save it to local drive.
Am I doing anything the wrong way, or is this a shortcoming of Firefox in features and options?

Sorry, I had missed your reply.
You can right click an element on a web page and open the built-in Inspector to see which element gets selected.<br />
If you get the normal context menu there some other element gets selected.
Current Firefox versions have a lot of built-in web developer tools including an Inspector and Style editor.
*https://developer.mozilla.org/en/Tools
*https://developer.mozilla.org/en/Tools/Page_Inspector
*https://developer.mozilla.org/en/Tools/Page_Inspector/HTML_panel

Movie files are not recognized

MacBook is from late 2007 OS X 10.5.8. Last December, I had to change harddrive and after the new harddrive, movies (from DVD´s or attachment with .mvw format) are not recognized. Quick Time Player and DVD Player are installed.
YouTube, streaming movies, news clips etc are OK
Any hints?

cceder,
QuickTime cannot handle all kinds of video unless you install extra tools, such as Perian:
http://perian.org/
Alternatively, you can try VLC media player, which supports most video and audio formats.
~Lyssa

Previously burned DVD's not recognized

Since I upgraded to SL- I've started having problems with my Optical drive (I think).
Previously created older movies burned on DVD-Rs (G5 PPC) when inserted in my iMAC are not recognized as DVDs.
Instead I get a message that I've inserted a blank CD (not DVD) in the machine.
These movies used to play just fine on my iMAc and still do on stand-alone players.
My Mac further indicates that these are blank CDs -and can be re-burned (which should be impossible).
Also, if I insert an older DVD with a PAPER label, the optical drive spins down and stops dead.
Non-paper label disks spin normally.
Am I looking at a failing optical player-- failed software, or both?
any help appreciated.

"My Mac further indicates that these are blank CDs -and can be re-burned"
You cannot "reburn" DVD -Rs.
"Also, if I insert an older DVD with a PAPER label"
As a precaution, never insert a DVD or CD that has a paper label. The drive heat can sometimes melt the glue leaving little pieces of paper inside the slot drive during ejections, burning, etc. Reason why I hate slot drives. Wish Apple bring back the tray drives.
If I were you, I would clean my drive "several" times w/a drive cleaner, repair permissions and restart the computer after each burning session.
If little pieces of paper are stuck inside the drive, you will have no alternative but to take your computer to a repair shop for removal & cleaning.

Textboxes are not recognizing

hi
This is ravi
I am working with OATS function scripting.After my record was completed when i tried to play back the script some of the text boxes data are not recognizing by the tool.
Eg:when i am recording the script i am using country name as denmark and submit the form.When the script was playback i was able to see denmark in the textbox but after submitting the form i got the warning message box as "please enter the country name".so i was unable to move furthur.
so can any one please help me regarding this issue.
Thanks in advance.

Ravi,
Check your script and make sure it has the dynamic variable tags around it. Also -- I find that with fill in the blank and submit via button tests that first clearing the box, then typing into the box, then clicking the button works better than say, over-typing what was in the box and hitting "enter/return".
You might also check:
case-sensitivity, perhaps it needs to be Denmark and not denmark. Perhaps there is an extra space or something like that.
In addition, sometimes it will think that your "text box" is somewhere different on the screen than it actually is -- so it "does" your action but the wrong information is sent. To fix this, do things slower and don't use short-cuts or hotkeys to complete actions.
I hope these help.
--tiff

Empty CD-Rs are not recognized

Hello,
I cannot burn empty CD-Rs, because they are not recognized. When I put an empty CD-R into my LG burner K3B tells me that no medium is inserted. CD-RWs and DVDs are working.
Any ideas? What additional information should I post?
Thanks
Albert

Some entries in system profiler:
ATA-Bus:
MATSHITADVD-R UJ-85J:
Modell: MATSHITADVD-R UJ-85J
Version: FAV1
Seriennummer:
Absteckbares Laufwerk: Nein
Protokoll: ATAPI
Einheiten-Nummer: 0
Socket-Typ: Intern
Los Power Polling: Ja
MATSHITA DVD-R UJ-85J:
Firmware-Version: FAV1
Verbindungstyp: ATAPI
Brennen möglich: Ja (Geliefert/Unterstützt von Apple)
Cache: 2048 KB
DVD lesen: Ja
Beschreibbare CD: -R, -RW
Beschreibbare DVD: -R, -RW, +R, +RW, +R DL
Schutz vor Pufferunterschreitung beim Brennen von CDs: Ja
Schutz vor Pufferunterschreitung beim Brennen von DVDs: Ja
Schreibstrategien: CD-TAO, CD-SAO, DVD-DAO
Medien: Nein
IOCDStorageFamily:
Version: 1.4
Zuletzt geändert: 29.09.06 06:19
Informationen: 1.4, Copyright © 1998-2005 Apple Computer Inc., All Rights Reserved
Ort: /System/Library/Extensions/IOCDStorageFamily.kext
kext-Version: 1.4
Lade-Adresse: 0x92a000
Gültig: Ja
Identifiziert: Ja
Abhängigkeiten: Erfüllt
Integrität: Korrekt
CDs & DVDs:
Version: 1.4
Unterstützt von: Apple
Sichtbar: Ja
ID: com.apple.preference.digihub.discs
Ort: /System/Library/PreferencePanes/DigiHubDiscs.prefPane

DVD-Rs not recognized

My Memorex DVD-Rs are not recognized as being recordable... in otherwords in the disk Utility, it says that there is a 0 capacity.
All options in the Disk Utility are disabled.
There is an insert in the spool about firmware upgrades...
Do I really need this upgrade? Or is there something else I can do?
Macbook Mac OS X (10.4.8)

Hi Magicpixie,
Welcome to apple forum,
Is that only memorex or other brand also having similar problem?
Have you managed to burn with any other media or with that memorex before?
Actually that is normal, and you cannot make asumption it won't record by looking into disk utility, because the media is still blank and unformatted.
Try this:
Go to system preference > cd & DVDs > when you insert blank DVD > open finder > as soon as the disk icon appears:
Try to drag any files you want to burn and after that drag the dvd to the trash (it will changed into burning icon and it will burn).
Good Luck.

Fcpx: the video properties of this clip are not recognized.

The original footage is 300fps hi-speed video, shot with Casio Exilim EX-F1. Resolution 512x384, framerate 29.97
When I imported the footage into FCPX, I marked "Transcoding: Create optimized media". So I did.
Now I start a new project, drag the clip into the timeline and I get the message "The video properties of this clip are not recognized." andI can choose to import the clip as 640x480. But I don't want that, and why have I just transcoded into pro-res if FCPX itself cannot recognize the clip afterwards? What am I missing here?
For the record: I also bought Compressor4 and Motion5 so if they are needed for my solution, no problem. I tried importing the clip first into Compressor4 but couln't find a way to export into a FCPX-project.
Short note about myself: long time Premiere user, recently switched to Apple + FCPX.

I can't show you screenshots because I don't have access to FCP at the moment. Take the first clip you want to be in the project. Open it into the timeline using the Open in Timeline function. You can now blade this clip however you like. Cut the beginning, cut the end. Slice it however you want it. The audio will be separate from the video. You can collape it into a compound clip if you want. This only happens with the first clip. Leave the timeline open. In the event event browser, find the second shot you want. Mark In and Out points. Press the E key to append it to timeline. You want to insert a a different shot in the beginning. Move the playhead in the timeline back to the beginning. Find the shot you want in the browser. Mark in and out points. Press the W key to insert the shot. You want to add transitions. Select the clips in the timeline and press Cmd-T. You want to add a timeline. Put the playhead in the timeline wherever you want. Double click the title to put it into the timeline. Add more shots into the timeline. Do you see what's happening? You are editing your program into that first clip's timeline. The dimensions of that first clip remain intact in that timeline. When you export you're exporting that clip's timeline. As I said, it's not ideal, but it's a workaround. Basically FCP only works with standard video formats.

Adobe products are not recognized in my Internet Explorer 10 on my Win 7 64B professional

Adobe products are not recognized with my Internet Explorer. I cannot open PDF documents on websites and I cannot play MSN games since Flash Player is not found. I have tried manage add-ons and enable status without success. Can anyone supply detailed information on how to fix this problem?
C-adobe

Are you running IE10 in 64-bit mode? The Adobe Reader plugin is 32-bit, and can only run on a 32-bit browser.
Regarding Flash Player, do you have ActiveX Filtering enabled? Disable it.

My ipod shuffle and nano are not recognized by itunes 12

My ipod shuffle (4th generation) and my ipod nano (2013) are not recognized in itunes 12. I have windows vista and have tried all of the troubleshooting suggestions to no success. How can i fix this?

Hi DMG1946,
I'm sorry to hear you are having issues with your iPod shuffle after a recent update. If your iPod shuffle isn't being recognized in iTunes, but is showing up on your Mac, you may find the troubleshooting steps outlined in the following article helpful:
iPod shuffle troubleshooting and service FAQ - Apple Support
If necessary, you may also need to use one or both of the following procedures to reset your iPod shuffle:
Resetting iPod shuffle - Apple Support
About iPod Reset Utility - Apple Support
Sincerely,
- Brenden

My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please ad

My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise

Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
tt2

TS1363 "An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari

Home movies on dvd are not recognized by I movie

Similar Messages

Maybe you are looking for