Home Network and Wifi Privacy

We have 3 computers - a desktop, a laptop, and a teen's laptop.  All running Window 7.  Desktop is wired to router, laptops on Wi-Fi.  We need the laptop and desktop to share printer, files, folders, and all actions.  The teen needs
to be able to access printer (connected to the desktop).  Question is, how to protect the privacy of desktop and laptop when teen's friends come over and logon to the wifi.  May be a dumb question, with a really obvious answer, but in looking at
the answers on the forum, can't seem to find one that applies quite right.  Thanks!

You will have to do some research and reading to get a grasp of networking.  Here are a couple of links to read:
http://windows.microsoft.com/en-US/windows7/start-here-to-set-up-a-home-network-in-windows-7
http://windows.microsoft.com/en-us/windows/setting-home-network#1TC=windows-7
http://windows.microsoft.com/en-us/windows7/products/features/homegroup
http://windows.microsoft.com/en-US/windows/homegroup-help#homegroup-start-to-finish=windows-7&v1h=win81tab1&v2h=win7tab1
The above should get you started and hopefully answer some questions.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

  • I have ipad2, using wifi home network and ios7. Why I cannot play youtube...help!

    I have ipad2, using wifi home network and ios7. Why I cannot play youtube...help!

    You don't download anything at all. The feature is built into the iPhone 4 already. Your carrier has to support the feature and there might be an extra charge to use it.
    You can read about how it works here.
    iOS: Understanding Personal Hotspot - Support - Apple

  • I found a wifi network called linksys and it let me connect to the network for a while but now it wont let me. it says that the ipad 2 is unable to connect and we have tried to connect to the home network and it didnt pick up the signal.

    but my laptop will. so my grandson restarted the home network and the ipad 2 still wont pick it up. but my laptop will pick the home network.

    Start here.
    http://www.apple.com/support/ipad/assistant/wifi/
    http://support.apple.com/kb/TS1398

  • Hello my iphone 3g can not connect to home network via wifi

    Hello to all, with my iphone 3g can not connect to home network via wifi. This only happens if I apply protection to the network. Unprotected my Iphone connects fine. Obviously the password to write error-free. I can not figure out what depends on this factor, however, another iphone connects fine. Help me please.

    I have a similar,but slightly different problem. My iphone 4 recgonizes my home wifi and shows it under Settings, but will not access it, no signal shown, just 3G.  It will access other wifi signals.  My wife's iphone works fine, as does an ipad and macbook.  This is new for my iphone, about 2-3 days.
    Help!  I reset network settings and rebooted the router (Apple), no avail

  • I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network.  Does anyone know where to find this?  It's a password that I set myself, not the one that came with my router.

    I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network.  Does anyone know where to find this?  It's a password that I set myself, not the one that came with my router.

    It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
    Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
    Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
    The network password will appear in the box.
    Quit Keychain Access.

  • Home Network and printer sharing with XP and Vista

       I have a home network and printer wired on my PC desktop which runs XP.  My Vista laptop has been connected to internet and printer through the home network for past 6 years flawlessly.  However, since October my Vista laptop cannot
    connect to the network printer, but internet has been working fine. 
       I've tried to uninstall/reinstall, update drivers, connect via TCP/IP but printer isn't located by add printer wizard.  When I plug printer directly into laptop via USB it works fine.  I also have tried another xp desktop in the house
    and that cannot locate the printer also.     Help!
    Thanks in advance,
    Medic

    What have you tried so far?
    Have you seen this yet...
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1770.html
    http://docs.info.apple.com/article.html?artnum=25609

  • I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

    I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
    Can anyone please advise what I am doing wrong?

    Hi LowLuster
    Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

  • Recently I was working on my home Network and lost my Password for my Home wireless connection. After many attempts, I remembered the password and was able to get in. Now the MacBook Pro only works at home on a Hard wire connection. I have an additional 9

    Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?

    I seem to have fixed it by putting <div  class="clearfloat"></div> after the navigation bar?

  • Share iTunes Library on home network and edit from all computers?

    I'd like to share my iTunes library on the 3 Macs on my home network and be able to edit the library (add songs, edit titles, add cover art, etc.) from any of the computers. Is there a way to do this? Thanks!

    We're attempting to work out the same trick on another thread.
    http://discussions.apple.com/message.jspa?messageID=6450437#6450437

  • Connect Fios to Cat5e home network AND Coax connections?

    My Verizon fios system was recently installed.  My home is wired for a Cat5e home network and standard Coax in all rooms.  The fios system is currently connected to the Coax connections and the TVs and Fios router all work fine.  Problem is that I would also like to use the Cat5e connections for devices that access the internet that don't have wireless capability and are not proximate to the Fios router.  Is it possible to connect the ONT to my Cat5e home network so that I can connect other devices directly to the Cat5e outlets, and keep the existing Coax set-up?
    I understand that the standard Fios set-up only allows using either an Ethernet output or the Coax output, but not both.  Any suggestions?
    One option might be to move the router to the basement (where the equipment is located that I want to connect to the Cat5e network), but then the router will likely be too far from the rest of the house to receive the wireless signal.  In that case, is it possible to connect a wireless router in another location (I have a Belkin wireless router).  Or do I need to get another router from Verizon?

    DC_Sox_Fan wrote:
    I just spoke to Verizon Fios Tech Support and they claim that it is NOT possible to use both the Coax and Cat5e connections.  So, for those that have a Cat5e home network, but still want to use th Coax for TV, Verzon says you are out of luck.
    Thats not strickly true but its not bad info either. You cant use both the coax and cat5 at the same time for INTERNET. The coax internet port (moca) is not active at the same time as the ethernet port. However, many systems use the ethernet for internet and coax for TV.
    Depending on how your house is set up this can be accomplished many different ways.
    I would assume that you have some kind of utility closet were all the ethernet cables converge, where you could place the router so that it can connect to all the rooms. Is this correct? If so, is there also a coax connection in there? Again, if so, you could place the verizon router in the closet, connect the coax to the router for the link to verizon and the TV's and then connect the ethernet to the lan for the rest of the house. This would be the simplest way assuming that you have this type of connection available to you. there are many other ways but it would all depend on what you have available to you and how your house wiring is set up
    ====================================================================================
    Error exists between keyboard and chair.

  • N80 home network and WWW

    I have recently purchased an n80 and I am trying to get the home networking and internet functional through my wirless router. So far I have had little success. I have enabled upnp on my d-link router/modem . I have installed The simple center software on my laptop and uploaded files to share. I have setup an access point on my n80 and I have enabled sharing. The shared folders on the n80 have also been selected to share all files. The simple center software has been allowed to operate through xp's firewall. THe only thing I am not sure about is the port forwarding on the router. I have a trigger port and a public port in the applications gateway section of my router . I have entered the ports listed in the simple centers setting section (1900,49153,49154,49152). I have these numbers in both the trigger port and the public port on the TCP protocol.
    Occasionally I can connet to the internet. However when I close the connection down and try to start it up again sometimes it does not work , showing 'unable to perform operation'. The only way to re-establish the connection is to power the router down then backup(reset).
    The same goes for the home networking. I had no success a all on the first day of trying. Went to work. When I came back tried it again and it worked perfectlly ?? Now on the third day it is working ocassionally.
    Anyone else had simmilar problems ? If so any soultions would be appreciated ! The phone itself seems to be pretty glitcy. And battery life isnt the best either. Apart from that eh !

    Forget that - just sussed it out...
    I'm using v3.0617.0.6 (03-05-2006) RM-92, Nokia N80 (31.01)
    I can't seem to get anything using the browser - I constantly get "Out of memory" errors, even when trying to use GPRS.
    It moans something about "packet data" and then bombs out...

  • TS4006 can this find my iPhone app work if you are not connected to cellular data network and wifi

    can this app work without cellular data network and wifi, if yes then how exactly this work ?

    To use Find my iPhone you have to set it up on your iOS device before you lose it. Your device also needs to have iOS 5, be switched on and connected to wi-fi/3G.

  • Slow WiFi only on home network and only on Mac

    I have a 2010 MacBook Pro and internet downloads and especially viewing any videos (like youtube) are painfully slow at home. Videos basically load for a few minutes, play about 5 seconds of video, then load for a few more minutes. I know it is not the actual computer, b/c if I connect to another network elsewhere everything runs fine and fast. Also, it can't totally be my network since we have a few PC's on the same home network that are significantly faster with downloads. Things that take 20 seconds on my PC's take up to 10 minutes or more on the MacBook. Are there settings somewhere that I have wrong? Thanks, -Amy

    So the RSSI and Transmit look okay (the speed 54 indicates a wireless G router). So your new Mac Book can run on wireless N protocal which is faster, so a thought for the future is an upgrade to a new router (which might solve all your problems). When I experienced much of what you are seeing, eventually I traced this to the WiFi router and got a new Airport express with N capability. I could have tried patching the router (mine was Netgear) but the added speed of the N standard pushed me onto a new router. My work PC's seemed to work okay on my old system and work great on the new Apple router.
    But if you can see the other networks and find channel 6 or 11 completely open I would recommend changing the Linksys router to one of those channels and seeing if anything improves. These channels have no overlap in frequency with each other, but are also the most popular. If these are taken it still would be worth a try. Other interferences such as cordless phones and microwave ovens and the like will also affect G protocol wireless so moving the channel helps skip around them as well.
    Before you make a change I suggest going to www.speedtest.net to verify your current performance. Maybe do this once in awhile for a day or so to get a measure of your current best and worst performance. This is a java applet that sends some packets to a local server and reads some down. It gives you a speedometer interface that gives you a Ping value (time for one packet to go between computers, should be in the 10 to 30 millisecond range) and then an upload speed and download speed. The web site actually keeps track of your speed values by date and time so you can review them as you make changes.
    I would pick the recommended server. They select one near by but not at Comcast. So this test looks at your service between Comcast and the world. Comcast actually has a localized version of this same program www.speedtest.comcast.net, and so it can test your speeds within your own network - basically to Comcast and back. So this tests your line to Comcast.
    Do this testing with your laptop connected by wire to your router (so this tests your speed without the WiFi) and then connecting to the internet via the WiFi. Without the WiFi and directly to Comcast's version of speed test, you should get the speed you are paying for from Comcast. The wired test to the speedtest.net suggested server gives you a more real world speed.
    Once you have these base lines then change wifi channels and see if that helps.

  • Wifi and home network and printing

    I just recieved my new MacBook Pro last week and certainly enjoying it, but have a few questions(bye the way, I'm a new Mac user):
    I have a Linksys wireless router in my home and able to access my shared files on my xp machine, but sometimes after the notebook goes into sleep mode and when it wakes it can no longer detect my pc. The PC can still access the notebook though. Any thoughts? And At that same time I am able to still access the internet.
    Also, the other night I received my first kernel panic attack and recieved the gray screen message and had to reboot. It happened while I was outside surfing the internet and I had lost my signal for internet and home network. I was picking up other wifi signal too and wondering if that could have caused it. I then made a call on my cordless phone and that is around the time of the kernel panic. Since then no Kernel panics. Again any thoughts? Should I be worried having a Kernel panic with a machine that is less then a week old?
    Look forward to your responses.
    MacBook Pro 2.2 ghz   Mac OS X (10.4.10)  

    You can have a go using a wireless bridge.. eg the airport express will do this.. you can join it to the iphone wireless running as a hotspot.. and then plugged into the TC wan port.. the TC has to be setup in router mode.. so this is going to give you double NAT errors.. and of course errors for all the time the hotspot is turned off.. but it can work. However you might find it requires you to manually connect up each time.. If you are really going to try and do this you will manage it.. but how fiddly it becomes might put you off after a week.
    You will chew up your 5GB very fast using any streaming media even radio. So be very careful to track the usage.
    Apple should have built in the TC the ability to plug in a wireless 3G modem.. via the USB but Apple have ceased to do adventurous stuff.
    If you give up the TC as main router there are plenty of better products on the market that will handle multiple wan connections.. !!

  • HT1338 my mac book pro is constantly "looking for networks" while connected using my home network and other wifi systems. how can i stop it?

    Why is my Mac Book constantly "looking for networks" while i am using wifi?

    If it is constantly searching for networks every five seconds or so, then it is the bluetooth - wifi problem discussed on other threads. I find that system preferences > network and clicking at the bottom on the 'Show wi-fi status in menu bar' button to switch it off, and then back onto the menu bar, solves the problem. Sometimes on waking I lose wi-fi completely and have to reload, but that's infrequent.
    Hopefully Apple will come up with a solution soon.

Maybe you are looking for

  • Excluding open sales order & Deliveries in Credit management

    Hi All,        I dont want to update all the open sales orders and deliveries in sales value in FD32. For this I have done the configuration and it is working fine. But after the configuration, system will delete the existing records in S066 & S067 a

  • HT4847 I have an old icloud account on my iPad wish to delete the email address in no longer valid and I can't remember the password how do I delet it

    Looking for help deleting an old icloud account the email address is no long valid I thought I changed this and deleted it previously but the iOS 7 update brought it back and won't let me delet any suggestions

  • Keyboard does not light evenly.

    My macbook pro 13" got drunk with a hole glass of vodka with peach.I took it to the techs and fix the motherboard and the sticky buttons(from the sugar) but i still have one problem, that none cared to mention to me and noticed it way to late. 90%of

  • Problem in bapi for vl01n

    Hi Experts, I have Written this below code to upload Delivery with refrence to sales orders with batch split . when i execute this program it is retuning the message  that the transfered sales order table is empty. If i change the document_catogy_sd

  • Centering background images problems

    Let's say I apply a background image to the body and center top the image like this ========================================================= <body style="background:url(BG_05.jpg); background-position:top center; "> </body> =========================