Home Network - MB Pro/PC/Mac Pro - Can't see an internal Mac Pro Drive
Hi folks... I'm the MacBook Pro user in the house.
3 drives in the Mac Pro - One is FAT32 formatted.
It has all the shared movies/music for the house on it (PC user also uses it)
I can't access the internal FAT32 drive from my macbook pro... all on leopard, no probs in seeing the other 2 drives on the mac pro.
any solutions?
Hmm.
Can the PC see the drive?
Is the Mac Pro running Leopard?
~Lyssa
Similar Messages
-
Can see Windows PCs from Mac, but can't see (and access) Mac from PCs
Yesterday, I ran into a strange problem which I'm not able to figure out.
I share an office with some engineers, who have their computer environment (server, network), all running Windows (XP and Vista on the PCs, Windows 2003 for the server).
Within that environment, I have 2 PCs (both XP) and an iBook G4 (Leopard 10.5.4.). I have also a printer (Epson Laser), which is connected to the office network, and an Airport Extreme Base Station.
Until last week, I could connect from my PCs to my iBook (wirelessly), and from the iBook I could connect to my PCs, the server, and via the server print on my printer (again, all wirelessly).
Over the weekend, I took out the Airport Extreme Base Station (to help with an issue at home - see my thread over at Printing), and yesterday I brought it back to the office and installed it again.
And since I re-installed the Base Station, this is the problem:
1. from PCs, I can't see the iBook (can't attach a PC drive letter - eg. I:\), and therefore can't access it
2. from the iBook, I can't print to my printer - furthermore, when I select the Printing preference and click "Add Printer", no printers whatsoever show up (the list stays blank), whereas before the engineers' printer (some Minolta Bizhub with Bonjour) would show up as well
3. I can, however, access the Windows server from my iBook
Any ideas what's going on? I tried to solve this, but gave up quickly (no way I can possibly figure this out), plus I have this issue at home (can't print wirelessly to a printer attached via USB to a Time Capsule - I can, however, print to the same printer if I attach it to the previously used Airport Express!) - 2 problems and mounting headaches!
I am thinking about re-installing the whole system (take off all data, do a complete wipe and start afresh…), but don't like to spend a whole day doing this…
Again, thanks for any advice!
JanYou only need one computer to configure the Base Station - and since you can easily do this from your PC, you really don't need to be able to do it from your Mac as well. I suggest you stop worrying about this, leave your Base Station running with the current firmware version, and use your PC if you ever need to make a configuration change.
Note that NO Base Station software needs to be installed on the Mac, for the Mac to be able to connect wirelessly to the Base Station. If your Mac is currently unable to establish a wireless connection to the Base Station, you have a different problem - and one that won't be solved by installing the Airport Admin Utility or downgrading firmware on the Base Station. Incidentally - what type of wireless security are you using on the Base Station - WEP or WPA? A base station configured to use WPA security will only be accessible by a Mac running at least MacOS 10.3. -
Can't see added internal or external drives?
I have an XPS-8500, Windows 7 / 64bit with a 2TB internal plus 30GB SSD. I have had some signs of the internal hard drive having problems. I have tried to add additional drives, ( internal Seagate 500gb, external WD My Book 3TB ) to do backup up can't get the computer to see either of these. Device manager see's them but can't get a drive letter assigned. Device manager also reports "Other Devices" "unknown device". With this combo, ( internal plus ssd ), does that mean I cannot add any other drives. I was told on another forum that the drives are only seen on port 0 & 1?? I have tried tools like DISKPART and Disk Manager to format and use the New Volume Wizard but they always time out with an error:
"The operation failed to complete because the Disk Management console view is not up-to-date"
Any help would be appreciated.
My Bios says RAID
Sata0/Port0 Main drive ( c: )
Sata1/Port5 DVD Samsung 224
Sata2/Port2 My New Drive, 500 gb seagate
Sata3/Port3 DVD Samsung 203b
MSata1/Port1 Samsung SSD 32GThanks for all the suggestions, I learned a lot of stuff between various forums but in the end I simply bite the bullet and did a system recovery using the disks I made upon purchase of the machine a few years back. I felt I could not get around that I had some OS system files that were corrupted ( says the output of scannow ). The main hardrive was failing and getting worse on each use. I did not have a system repair disk ..... and the list goes on and on.
After the restore, I reloaded all my software, downloaded hundreds of MS Updates. Had to re-configure the bios and set the ssd for raid and caching with the new drive accelerated. The new drive is only 500gb versus the oem 2 TB, but I'll pick up something else soon. The WD 3TB discovers. I have it partitioned into 2, 1.5 TB partitions.
Everything is functioning fine. I created a system repair disk. I have scheduled backups and will be creating a system image. Hard drives do not last forever, but this time I will be prepared ( lesson learned ).
Joemt. -
Can't see the other Mac on the network
I have a iMac G5 and a MacBook Pro connected via wirelss at home. Sometimes I can't see the other Mac in the Network folder, however I can connect to the other Mac (even I can't see them in the network folder) by afp the IP address via Safari... I have enabled the "personal file sharing" option in both of the machine.
Help please.
SamuelSam,
I've had the same problems numerous times myself: the other Macs don't show in the network folder. Why? I'm not too sure myself, I've been given several possible explanations by the geniouses in San Francisco. However, the best trick to connect is via the Finder 'Go to' menu. The very last item should say something like "Connect to server..." -which is the same as the 'Command-K' combination of keys. That'll bring up a list of the last few servers on the network, and al you have to do is choose the one you want, and voilà!
* Guy -
PLEASE HELP I CAN HEAR SOUND BUT CAN'T SEE VIDEO(final cut pro x)what gonna on?os x lion 10.7.4(11e53)
What's the video exactly? Open into the QT player and report what it says in the movie inspector or post a screen shot.
-
I cannot print any email or web pages over a wireless home network. I know that I can print my files over this network, just not anything from the web or emails using Firefox. I am using Windows 7 and printing to an Epson.
== This happened ==
Every time Firefox opened
== when I set up the wireless home network.The most likely reason for this is that the wrong printer is chosen in the File->Print window.
In Firefox, go to File->Print and click the dropdown box with printer names. Ensure that the correct network printer is selected, then try printing again. -
Mac Mini – can't see Internal HD after adding SSD-.
I have installed a SSD in my brand new Mac Mini – it was shipped with the 1TB drive.
I booted up and got the blinking Question Mark Folder.
• So, I booted up with option held down; I could see the SSD and the Apple 1TB (which has Mavericks system installed).
• No problem I thought – it probably needed me to choose the start up disk
• Opened Disk Utility; I can see both drives; that's good! I thought I'd format the SSD while I was here, so I did.
• Quit out of Disk Utility to get Start Up Disk options – both discs missing. Oh, dear.
• So booted up again and did an internet recovery; putting a system (Mountain Lion) onto the new SSD (whereas before it was an empty, erased Disk).
• This took an hour over the net but it worked. I booted up with it and it very fast – but the Apple internal 1TB is missing.
Weird part:
• Opened Disk Utility on the computer; I can see only see the new SSD; so I opened Disk Utility to see if I could view the internal, nope - not there.
• So I thought I would be scientific and boot up again holding OPTION down; opened disk Utility; and viola – there's both drives; each with a system and OK according to Disk Utility.
So in a nut shell – when I boot up with Disk Utility holding OPTION I can see the internal BUT when I am booted up as normal with the new SSD; and open Disk Utility; I can't see the internal.
Shall I just erase the 1TB internal and start again? I spent a bit of time Migrating my old machine to this 1TB; so would like to not to have to do that gain.
Thanks
BarryHi 66 Firebird,
I have similar issue.
I can see my Samsung 840 Pro 256 SSD and original 1TB hard drive in Internet recovery mode. But it did not allowed to format 1TB drive. As soon as software installed into SSD and booted from it, my 1TB vanishes.
Do you have any luck?
What did you to get your 1TB back? -
My home sharing on itunes is on but can't see it on my apple tv any one knows why...?
It will allow your homesharing, airplay, airprint, propreitary apple networking support, and other features. You should absolutely try to enable it. Some routers, even when the ports are opened, just don't work perfectly with Bonjour broadcasts. But you might be able to get it to work. Look to see if anybody else with your router has already figured this out in the eircom forums.
-
I have installed Elements 13 on my Mac but can't see how to open it. When I click on the disk icon on the desktop it takes me to an information page that gives no information about opening Elements 13. How do I open the software so that it can be used?
Unfortunately, when I open applications, adobe photoshop elements 13 folder does not appear in the adobe folder. It appears as a disk on the desktop, only.
-
Can you connect iPad to Mac mini, Can you connect iPad to Mac mini
Can you connect iPad to Mac mini, Can you connect iPad to Mac mini?
Every Mac Mini has a USB port. Every Mac Mini can run iTunes. The only catch is that you need to be running Mac OS X 10.5.8 (Leopard) or later. So in general, yes, an iPad can connect to a Mac Mini.
-
did update to iOS 7 now I can't access FaceTime , says can connect to network , I am connected to wifi can only see my Ipad on find my iPhone can't locate my iPhone 5 though?
Hi, Abril_Perez17.
This may be related to a new feature embedded in iOS7 that shows all purchased music by default. Go to Settings > Music, then turn off Show All Music. See if the issue ceases once the feature has been disabled. This information is located on page 63 of the user guide below.
iPhone User Guide
Regards,
Jason H. -
Airplay mac mini can't see apple tv, but itunes does
it seems that my mac mini can't see my apple tv for airplay, macbook on same lan does see it
both are connected via ethernet, mac mini has hands off installed
i try to use guest account but can't see from there tooI'm not referring to the latest version, I'm asking if your mini is 2011 or newer?
Click the link I posted previously. -
For Boot Camp, if you save a file when you are on the Windows side, when you return to the Mac side, can you see the file or can it only be "seen" on the operating side you create it in?
Why don't you (generic most every post lacks critical details) be clear and say you never used Mac OS etc.
But, I did try to anticipate and give you what you needed.
Excel is one of those rare programs that, if they are extremely large complex spreadsheets still tend to run better under Office for Windows.
A VM won't do for that but it does make it easier to transition. As in: install Windows natively, then use VMware Fusion or Parallels to attach to the partition and OS. That way you can run Windows as Guest OS VM under Mac; and still run Windows natively dual-boot when needed.
The word "see" was not what you wanted, was it? really? you want to open and make changes and keep it on Windows side rather than Save As or copy to Mac
You use Windows and don't know it has NTFS (NT FileSystem)?
http://en.wikipedia.org/wiki/NTFS
http://en.wikipedia.org/wiki/Hierarchical_File_System (HFS) native file system used by Apple
And there is much more UEFI style "bios" and other things I suppose.
Great thing about Google and encyclopedias or dictionary, you can look up what you don't know. -
I recently updated my IMac software to the latest version, now i can't see by WD back up drive in time machine. its conected to the firewire port ok and i can see it if i check firewire connections. The drive works ok on an old windows laptop. Any ideas.
leedssparky wrote:
Is it possible that i did this whilst updating the OS software whilst leaving the WD drive connected.
It's a good idea to eject and disconnect external HDs, just in case, but that shouldn't cause a problem.
Why when setting up time capsule, does it only look for WIFI drives through airport.
I think you're confusing Time Machine (the backup software) with a Time Capsule (Apple hardware combining a wireless router and HD). Unless you have a Time Capsule you want to back up to, there's no point to clicking the Set Up Time Capsule button, if that's what you mean:
I've attached the Firewire bus from system profiler, dont understand why i can see it there but not in TM.
There seems to be some sort of problem with the drive, since Disk Utility thinks it's fixed, but immediately the problem returns (per the first sample you posted).
How old is the drive?
If it's within the warranty period, you might want to contact WD or the place you bought it. -
Can't see Tiger installer in external drive
I want to reinstall Tiger from the disk after erasing my startup drive - on my G4, which has a broken superdrive.
Right now I have Tiger installed and when I insert the Panther installer in the external drive and restart, I can choose to boot from the Panther install disk. However, when I insert the Tiger install disk, I can't see it in the external drive. (I only inserted the Panther disk as a test.)
The Tiger install disk is black with a gray X.
Does anyone know why I might be able to boot from the Panther installer but not the Tiger installer?
Thank you,
DebbieI put the Tiger DVD in the iMac and started in Target Mode - I see the firewire icon on the screen. I booted the G4 with the Option key held down, but I just saw the G4 startup disk and back and forward arrows.
When I chose the forward arrow, this is what I saw:
Default Catch
code 300 at
%SPRO: ff8494a0
%SRRI:0000b030
Paraphrasing now:
Welcome to Open Firmware
Type mac-boot return to continue booting
I tried typing mac-boot return, but got another version of the same screen.
Maybe you are looking for
-
Table Editor not working with reference
Java work on references right.. I have a static Vector in my main class. Then i have a JTable in one of the subsequent classes which will come up on one of the action performed events. now this JTable has a DefaultCellEditor which here is a JComboBox
-
In java ,how to access the user-defined type of pl/sql?
in my application,i using the following code to access the pl/sql type self-defined,but it throws run-time exception,how can i resolve it?String sqlStr="{call BossStat.dunStat(?,?,?,?,?,?)}"; OracleCallableStatement ocstmt=(OracleCallableStatement)co
-
Access Denied When Attempting to Deploy an SQL Report Built in VS
------ Deploy started: Project: SQL Reports, Configuration: Debug ------ Deploying to http://localhost:82/ReportServer Error rsAccessDenied : The permissions granted to user 'ALLIEDFIT\rculver' are insufficient for performing this operation. Where ex
-
Battery not full charge even I charged it over the night.
I bought Classic 5days ago, and it can charge 100%. But suddently, from 2 days ago, I can not charge full battery even charged it throught the night. It stuck at 43% or some level percent. I found many people like me. For the example is this review t
-
how can we get phone to work after trying to update it has froze on the connect to itunes screen?