Home network not displayed in AirPort list

My home wireless network suddenly won't show up on my 1st-gen MacBook. It is showing up on other computers, and other networks are showing up on my MacBook - it's only the combination of the two that isn't working.
I have tried basically svery solution I can find on these and other forums, including restarting the Macbook, turning AirPort off and on, rebooting the router, and reinstalling AirPort Update 2007-002. Nothing has worked. I can't run network diagnostics because I can't select the network in the list - it's like the network doesn't exist to the MacBook.
The router is a SMC Barricade-G. I've never had a problem like this before.
MacBook Core Duo   Mac OS X (10.4.9)  

Resetting and renaming the router didn't help. I have a feeling that I may just have to get a new one. Any other suggestions would still be appreciated, though.
Also, I can connect to the router through Ethernet.

Similar Messages

  • I'm having lot of instability in my home network since the last airport update. Am I alone In this?

    I'm having lot of instability in my home network since the last airport update. Am I alone In this?

    Just curious. Have you opened disk utilities application in the utility folder and select your drive, and run repair permissions. This may or may not help. It also may take awhile if it has never been done. Good luck!

  • Custom playbar does not display in the list of available widgets

    I followed the steps described in the "Skins" page of the Captivate 5 help outlined here:
    http://help.adobe.com/en_US/captivate/cp/using/WSc1b83f70210cd101126156ac11c7f147d6b-8000. html
    Now my problem is, that my custom playbar is not displayed in the list of available playbars (neither in the Project->Skin Editor->Playbar nor in the list of widgets). If I just duplicate one of the existing playbar files in Gallery/Widgets/Playbars it's listed without problems.
    I use Flash CS5 to edit the playbar and tried to publish it as AS3 and AS2 - no success.
    Are there special settings I need to set in the publishing settings to get my playbar in the list? Anything else I'm missing?!
    Thanks,
    Peter

    Try putting the swf for the playbar in ...\Adobe Captivate 5\en_GB\Gallery\Playbars\AS3\

  • Infopath forms are not displaying in the list

    Hi,
       I have created an info path form template after customizing a list form using infopath designer. But it is behaving weird. After submitting the form it is not displaying in the lists allitems view rather it is displaying from designer but directly
    under the list not in the items folder.
    1) Any idea why this is happening?
    2) What is the use of NaN.xml? why it gets created in the list?

    Yes, it sounds very simply, but there is a very tiny little broken piece causing lots troubles.
     It’s tiny piece, so the solution is going to be very simple. On the other hand, it’s hard to find out because it is very tiny broken piece.
    I have feeling that you made a mistake while saving/publishing or filename in submit option (I don’t think List InfoPath form let you set up different submit option).
    Sometimes, it is much faster and easier to re-do it again. I recommend you to following the article below. You can skip most but please pay attention on the start (beginning of Part 2 – Customizing)) and on the end (Part 4 - Publishing)
    http://msdn.microsoft.com/en-us/library/office/gg180738(v=office.14).aspx
    Once you follow the best practice written in the article and make it work, then you may realize the difference and mistake.
    백상하 - Stop hacking my blog http://blog.naver.com/agilepoint
    쉐어포인트 배움터 http://sharepointkorea.com

  • Some .htm file not displaying in Topic List, but displaying in RH11 folder

    Hi All,
    We are running a project using RH 11, team consist of 3 person (include me)
    But we have problem with many  .htm file from my 1st coworker, file not displaying in Topic List in my Robohelp and 2nd coworker.
    Although we already get the latest file again and again
    But .htm file displaying in all our RH11 folder.
    In my 1st coworker RH, all file displaying in Topic List also RH11 folder, but when file generated then
    Many files from 1st coworker, hyperlink is not working well (broken link / file not found)
    Does anyone have experience about this problem
    Thanks

    First of all, make sure you do not have the following files in source control: .cpd, .pss, .ldb.
    These files contain local information that can cause problems when in source control.
    Then try this:
    Everyone deletes the .cpd file.
    Everyone gets the latest files for the whole project from source control.
    Open the project.
    Does everything now display correctly?
    If yes, you need to make sure you delete the cpd file before opening the project each day, and also during the day if you know a co-worker has made changes that you need. This file is a database which includes a list of all the files Robohelp knows about. When other people are adding and removing files, this information no longer matches properly. I recommend doing a Get Latest in these situations as well, just to make sure Robohelp can find the correct information.
    If you are still not seeing the correct files repeat the above process, but at step 2, pick the options to Overwrite local files. I can't say where you will see these options - they may be two checkboxes in a dialog box when you select Get Latest - it will depend on your source control application.
    Hope this helps.

  • Have added 3 range expanders to my home network now i find airport express will stream to my hifi but it stops every now and then as though it is buffering, any suggestions?

    Have added 3 range expanders to my home network now i find airport express will stream to my hifi but it stops every now and then as though it is buffering, any suggestions?

    Have added 3 range expanders to my home network now i find airport express will stream to my hifi but it stops every now and then as though it is buffering, any suggestions?

  • Firefox does not display frames, only lists. Help!

    popular websites, e.g. youtube, are not displayed properly in so far frames are not displayed, only clickable lists of text. Please help!

    It sounds like Firefox is, for some reason, not loading the CSS file for YouTube and other sites.
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    Please report back soon.

  • SharePoint 2013 site coll's created. Home page not displaying for any site collection in farm

    SharePoint 2013 site coll's created. Home page not displaying. Same issue for all site coll's in the farm. Done the basic checks. Any Ideas?

    Hi lakshita,
    Would you please check whether you can go to the page:
    http://siteurl/_layouts/settings.aspx page:
    http://siteurl/default.aspx page? If so, go to Site Features in site settings page, reactivate the Wiki Page home page feature, check the result.
    If not, please check whether there is related information in ULS log and event viewer log file? Does the page shows page not found or other errors? Check whether the site can be opened in other machine?
    Thanks,
    Qiao Wei
    TechNet Community Support

  • IPod Touch only connects to home network; not Airport, Starbucks, Panera...

    Before I start, I've read the FAQs and have looked through a number of topics already posted.
    I seem to have the opposite problem everyone else is having. My iPod Touch connects just fine to my home wireless... It connects and I'm able to browse the internet, download apps, etc without fail.
    However, when I was at the airport recently (both St. Louis and Dallas/Ft. Worth), my Touch would "connect" to the wireless there, but I couldn't go on the 'net or get new apps, etc. It was behaving as if I wasn't at a location with wireless access. When I returned home, I went to Starbucks, Panera, McDonald's... several places with free, open, easy-to-connect WiFi (and took my laptop to make sure that their wireless was working), and had the same problems as I did at the airport.
    Considering the best part of having wireless on the Touch is that you should be able to access it anywhere with WiFi, it seems kind of "useless" to have it only work at home (I have two computers at home; so it's not like I need to use the Touch for internet there).
    Any thoughts? Obviously, the whole "check your router settings" / "reset your router" answers are not going to help me, as I have no control over those, nor can I see them at these places. Help would be greatly appreciated!

    I'm having the same problem. My iPod Touch connects to my home network and another secure network for which I enter the network name and password. However I am unable to connect to any free WiFi, even when my laptop can access it with no problem. The signal is apparently strong; I can see all the bars on the upper left, but when trying to connect to Safari or the app store it says that there is no connection.

  • Network shows up on Airport list, but internet itself does not work.

    We have a desktop with Windows XP, and a Mac laptop that runs Leopard. We set up a wireless router in our apartment and put password protection on it. We are able to select our network from the airport list, and log in with our password, but when we try to use the internet (with safari, firefox, etc.) the pages won't load.
    We have full signal strength according to airport, and our internet connection works just fine on the PC. Any idea on how to troubleshoot?

    I wish I could help you, but I'm having EXACTLY the same problem. The PC connects fine, but my Macbook Pro won't connect. I have had no problem with this until about a month ago. (Before that all was fine. We even got a new modem, but no joy.)
    Moreover, though, when I try to connect from the modem via ethernet (dsl) it says I am connected to the net, but likewise the browser can't connect to the web.
    I rang the ISP and the modem supplier. They asked me to check that the modem setting allowed multiple computers to share the connection. My settings were already set to allow this, but you could at least check this out.

  • Airport express not displaying in airport utility

    My airport express has been working just fine until today. I took it with me to Hong Kong, so that I could use it in my room to create a wireless network for my iPhone.  When I brought it home, I plugged it back in, and went to re-configure it for my family room. I use it for AirPlay mostly, as my speakers are plugged into it. After I went through the configuration change, there was an error, and the screen told me to close the Airport Utility and retry. Well, I've had no success since. I've reset the AE multiple times, and it still does not display in the airport utilty, and the AE itself flashes yellow.
    Any suggestions?
    Thanks,
    ted

    Update:  After leaving the utilty on for a while, and plugging the AE into the wall near my time capsule, it finally showed up in the window. I was then able to configure it properly. I guess I just needed to be more patient.

  • I have several questions: 1. When I connect my Iphone using Wi-Fi what can I then do? Why won't my Iphone recognize my home network run off of Airport Extreme, and the app Nike   Ipod sensor never activates.

    I went to Starbucks this morning and my Wi-Fi on my Verizon Iphone connected, what does this allow me to do? My Wi-Fi does not recognize my home network from which I connect wirelessly to my MacBookPro and to my Apple TV using Airport Extreme router, why? Lastly, what do about the app NIke + Ipod not working. The sensor does not activate even after walking a half mile.

    It might be best to ask only one question in each post otherwise you may never be able to mark them as solved.
    I went to Starbucks this morning and my Wi-Fi on my Verizon Iphone connected, what does this allow me to do?
    It should allow you to access the internet, read mail, etc.
    My Wi-Fi does not recognize my home network from which I connect wirelessly to my MacBookPro and to my Apple TV using Airport Extreme router, why?
    Try restarting your router (remove power for 30 seconds and restart). It may not be properly assigning an IP address to your iPhone.

  • AE not visible in Airport list/No wireless connection

    Hi
    I've been using an AE for the last few months to create a wireless network with a Pirelli Tiscali modem. It worked fine until about 2 weeks ago when it dropped out and became unusable. I've done many factory resets as well as others. Occasionally Airport picks it up and lets me configure the AE but then it disappears immediately. Basically it's just not visible in the Airport list. I've updated the firmware on the AE and have got iTunes 8. Any ideas? I want my wireless back!!

    Hi everyone
    i ran a disk permissions check and repair and got the following readout -
    Permissions differ on "System/Library/CoreServices/AirPort Base Station Agent.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    I guess it's bugged itself out but i have no idea how to 'fix' the problem.

  • Sharepoint 2010 - Home Page not displaying, all other pages work fine

    The web page URL <server>/sitepages/Home.aspx is not displaying when accessed. All other pages work fine. We changed the default welcome page to another page, and that works. When we try to access the Home.aspx, it displays "An unexpected error
    occurred" message. The Home.aspx only contains a couple of Lists, with Links, and a calendar. The other odd thing is that the Home.aspx displays in SharePoint designer in Advanced Edit mode, but won't display in a browser. Any ideas?

    Hi Isepic,
    1) Check the approval of the page (Home.aspx) whether it is in pending state .
    2) OR might be some problematic webpart is added in the page. You can try to close it and access. To do that,you can try to access the web part maintenance page of home.aspx and test by closing the webpart one by one.
         To access the maintenance page,pass the parameters ?contents=1 after the home.aspx
           For example, http://site url/home.aspx?contents=1
    3) Also,check the ULS logs after accessing the home.aspx to know what is happening.
    Please remember to mark your question as answered & Vote helpful,if this solves/helps your problem. 
    s p kumar

  • Connecting to Wireless Home Network w/o an AirPort Card

    I want to connect a CRT iMac that's incompatible with AirPort Extreme to a wireless home network.
    The problem is that every USB adapter I've seen is Windows-only.
    Does anyone know of any USB-wireless adapters that are compatible with OS X?

    Strider, it
    i is
    standard-Airport-ready, but as Henry observed, it's not worth spending twice as much as an ethernet bridge would cost. (At least not for a desktop.)
    (I was hoping to save some money by using USB but judging by the other Topic, that would be more trouble than it would be worth.)
    I have found one good deal on an ethernet bridge here http://store.yahoo.com/justdeals/me101au.html . Apparently the reason that it's inexpensive is that it was manufactured to be sold in Europe. Is there any reason that that bridge, with a U.S. power adapter, wouldn't work well on this side of the Atlantic?

Maybe you are looking for