Home network stopped functioning after FIOS installation

I have 2 desktops running XP and a wireless laptop running Vista. With my old router, I was able to transfer files and print.
After the FIOS installation, the three computers don't "see" each other. All 3 have internet connectivity and no problems with
email. The 2 destops are cabled to the router (MI424WI) and the laptop uses wireless. My printers are cabled to one of the
desktops. It is most inconvenient only have 1 PC that can print. I've tried the "Set up a network" wizard on the XP machines
but it doesn't change anything.
Any ideas would be appreciated.
Solved!
Go to Solution.

The firewall hint did the trick. I tweaked Norton 360 on the desktops and I can now print and file share. Thanks much, Justin!
Jack

Similar Messages

IPhone 5S home button stopped working after iOS 8.3 update

My home button stopped working after I updated it to the iOS 8.3. My finger print can still unlock the phone but the home button won't work.

What you are describing sounds more like a hardware issue than a software issue. Make an appointment at the genius bar of your local apple retail store and have the device evaluated.
Make a Genius Bar Reservation (or cancel an existing reservation)
http://www.apple.com/retail/geniusbar/
Sign in using your Apple ID

My MacBook keyboard and track pad stopped functioning after pairing an Apple wireless mouse and keyboard. Any suggestions?

My MacBook keyboard and track pad stopped functioning after pairing an Apple wireless mouse and keyboard. Any suggestions?

I deleted the mouse by selecting it in the bluetooth options and clicking the minus tab. I went ahead and reinstalled OS X right afterwards. Right now I am having to use a USB mouse and keyboard. I disconnected both prior to start up. I get a widow that shows a demonstration on how to install batteries into a wireless mouse only way to pass that screen was to reattach the USB mouse. Then with a fresh startup no resolve.

By creating wireless network with Airport Express, original wireless network stops functioning

I want to use the Airport Express to create a second wireless network downstairs. Upstairs I already have a wireless modem/router (Draytek 2850). The signal downstairs however is to weak. When I create the wireless network on the Airport Express, this works perfectly. However after the creation, the wireless part of the Draytek modem/router stops functioning. The wired part keeps working, but when I connect to the wireless part I access anything. Why is that?
The Express is set to Bridge modus and under TCP/IP I've selected that the IPV4 configurations has to go via DHCP.

I set the Network Name the same as the SSID, security type on the router is Mixed(WPA/WPA2)/PSK, which on the AX is WPA/WPA2 - personal I guess. The password is the same as the DrayTek.
Yes, WPA/WPA2 Personal on the AX is the same as the Draytek's wireless security option.
The radio channel of the Draytek router is 6, the channel of the AX is 11. Do I miss anything here?
No, it looks like you have all of the right settings as far as I can tell ... and you already stated that the AX is in bridge mode, i.e., Connection Sharing = Off (Bridge Mode) ... correct?
If so, I would recommend performing a complete power recycle of your networking components, as follows:
Power-down the DrayTek, and AX. Order is not critical.
Power-up the DrayTek; wait at least 10-15 minutes to allow it to stablize.
Before powering-up the AX, verify that you can gain Internet access via a wireless connection to the DrayTek. If so, continue.
Power-up (plug-in) the AX; wait at least 5-10 minutes to allow it to stablize. It should have a steady green status light. If not, use the AirPort Utility to determine the reasons why it doesn't from the Status page of the Utility.

My home network is broken after installing Yosemite

I have an iMac (early 2010), a Macbook Pro (early 2011) and a PC running Windows 7.
After installing Yosemite on both my Macs, all home network operations between the apple devices has gone south. Browsing folder on remote computer, transferring files between the computers - either via finder or through shared libraries on iTunes - everything is now crawling or simply stuck.
I thought my router may be the problem, but the Windows machine is working just fine when copying files to and from a Mac device.
Any solutions out there please?

I have an iMac (early 2010), a Macbook Pro (early 2011) and a PC running Windows 7.
After installing Yosemite on both my Macs, all home network operations between the apple devices has gone south. Browsing folder on remote computer, transferring files between the computers - either via finder or through shared libraries on iTunes - everything is now crawling or simply stuck.
I thought my router may be the problem, but the Windows machine is working just fine when copying files to and from a Mac device.
Any solutions out there please?

TC guest network stopped working after last update

Hi, I got the new 2TB TC. And it was working fine. Since I updates it to 7.7.3. The guest network stopped assigning IPs. I can see it and change the settings but I can't join it anymore. It was working fine before.
I Am setting it from iOS devices not a Mac.
The TC is in bridging mode.
I Also tried restoring it to default settings.
Any ideas how to fix this?
Thank you.

I had it working right out of the box when I bought it, there was no double NAT warning or error message, unlike now I have to ignore the double. NAT error message for the light on the TC to turn back to green again.

Home button stopped working after 1 week

I've had my new iPad mini 2 for a grand total of 1 week and the home button stopped working. Fortunately Best Buy exchanged it for me. Is this a common issue?

No.

Networking on Ubuntu VM stopped functioning after latest VMWare tools upgrade

when configuring the latest VMWare tools, I receive the following error:
"The vmxnet driver is no longer supported on kernels 3.3 and greater. Please upgrade to a newer virtual NIC. (e.g., vmxnet3 or e1000e)"
I have followed instructions on a few different posts to try to fix this, and none have worked.
I have tried running the vmware tools configuration script with --clobber-kernel-modules=vmxnet - that didn't help.
I tried changing ethernet0.virtualDev = "vmxnet" to "vmxnet3" in the .vmx file - that didn't help either.
Running Ubuntu 14.04 on VMWare Player 6.0.6 build-2700073 on Windows 7. The VM image in question is Ubuntu 14.04 on Linux kernel 1.13.0-43.
This is for bridged mode (which I need) - running in NAT mode works fine.
$ uname -a
Linux ubuntu 3.13.0-43-generic #72-Ubuntu SMP Mon Dec 8 19:35:06 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
dust@ubuntu:~/Desktop/vmware-tools-distrib
$ sudo ./vmware-install.pl --clobber-kernel-modules=vmxnet
The previous installation was made by the tar installer (version 4).
Keeping the tar4 installer database format.
You have a version of VMware Tools installed. Continuing this install will
first uninstall the currently installed version. Do you wish to continue?
(yes/no) [yes]
Uninstalling the tar installation of VMware Tools.
Stopping services for vmware-tools
vmware-tools stop/waiting
Stopping services for vmware-tools-thinprint
vmware-tools-thinprint stop/waiting
File /etc/pulse/default.pa is backed up to /etc/pulse/default.pa.old.8.
update-initramfs: Generating /boot/initrd.img-3.13.0-43-generic
update-initramfs: Generating /boot/initrd.img-3.13.0-39-generic
The removal of VMware Tools 9.6.5 build-2700074 for Linux completed
successfully.
Installing VMware Tools.
In which directory do you want to install the binary files?
[/usr/bin]
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc]
What is the directory that contains the init scripts?
[/etc/init.d]
In which directory do you want to install the daemon files?
[/usr/sbin]
In which directory do you want to install the library files?
[/usr/lib/vmware-tools]
The path "/usr/lib/vmware-tools" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]
In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]
The path "/usr/share/doc/vmware-tools" does not exist currently. This program
is going to create it, including needed parent directories. Is this what you
want? [yes]
The installation of VMware Tools 9.6.5 build-2700074 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes]
Initializing...
Making sure services for VMware Tools are stopped.
The module vmci has already been installed on this system by another installer
or package and will not be modified by this installer.
The module vsock has already been installed on this system by another installer
or package and will not be modified by this installer.
The module vmxnet3 has already been installed on this system by another
installer or package and will not be modified by this installer.
The module pvscsi has already been installed on this system by another
installer or package and will not be modified by this installer.
The module vmmemctl has already been installed on this system by another
installer or package and will not be modified by this installer.
The VMware Host-Guest Filesystem allows for shared folders between the host OS
and the guest OS in a Fusion or Workstation virtual environment. Do you wish
to enable this feature? [yes]
Before you can compile modules, you need to have the following installed...
make
gcc
kernel headers of the running kernel
Searching for GCC...
Detected GCC binary at "/usr/bin/gcc".
The path "/usr/bin/gcc" appears to be a valid path to the gcc binary.
Would you like to change it? [no]
Searching for a valid kernel header path...
Detected the kernel headers at "/lib/modules/3.13.0-43-generic/build/include".
The path "/lib/modules/3.13.0-43-generic/build/include" appears to be a valid
path to the 3.13.0-43-generic kernel headers.
Would you like to change it? [no]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-OyHNrF/vmhgfs-only'
/usr/bin/make -C /lib/modules/3.13.0-43-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-headers-3.13.0-43-generic'
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/backdoor.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/backdoorGcc64.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/bdhandler.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/cpName.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/cpNameLinux.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/cpNameLite.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/dentry.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/dir.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/file.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/filesystem.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/fsutil.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/hgfsBd.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/hgfsEscape.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/hgfsUtil.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/inode.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/link.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/message.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/module.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/page.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/request.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/rpcout.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/stubs.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/super.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/transport.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/vmci.o
CC [M] /tmp/modconfig-OyHNrF/vmhgfs-only/kernelStubsLinux.o
LD [M] /tmp/modconfig-OyHNrF/vmhgfs-only/vmhgfs.o
Building modules, stage 2.
MODPOST 1 modules
CC      /tmp/modconfig-OyHNrF/vmhgfs-only/vmhgfs.mod.o
LD [M] /tmp/modconfig-OyHNrF/vmhgfs-only/vmhgfs.ko
make[1]: Leaving directory `/usr/src/linux-headers-3.13.0-43-generic'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
      MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-OyHNrF/vmhgfs-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-OyHNrF/vmhgfs-only'
cp -f vmhgfs.ko ./../vmhgfs.o
make: Leaving directory `/tmp/modconfig-OyHNrF/vmhgfs-only'
The vmxnet driver is no longer supported on kernels 3.3 and greater. Please
upgrade to a newer virtual NIC. (e.g., vmxnet3 or e1000e)
The vmblock enables dragging or copying files between host and guest in a
Fusion or Workstation virtual environment. Do you wish to enable this feature?
[yes]
VMware automatic kernel modules enables automatic building and installation of
VMware kernel modules at boot that are not already present. This feature can be
enabled/disabled by re-running vmware-config-tools.pl.
Would you like to enable VMware automatic kernel modules?
[yes]
Thinprint provides driver-free printing. Do you wish to enable this feature?
[yes]
Disabling timer-based audio scheduling in pulseaudio.
Detected X server version 1.15.1
Distribution provided drivers for Xorg X server are used.
Skipping X configuration because X drivers are not included.
Creating a new initrd boot image for the kernel.
update-initramfs: Generating /boot/initrd.img-3.13.0-43-generic
vmware-tools-thinprint start/running
vmware-tools start/running
The configuration of VMware Tools 9.6.5 build-2700074 for Linux for this
running kernel completed successfully.
You must restart your X session before any mouse or graphics changes take
effect.
You can now run VMware Tools by invoking "/usr/bin/vmware-toolbox-cmd" from the
command line.
To enable advanced X features (e.g., guest resolution fit, drag and drop, and
file and text copy/paste), you will need to do one (or more) of the following:
1. Manually start /usr/bin/vmware-user
2. Log out and log back into your desktop session; and,
3. Restart your X session.
Enjoy,
--the VMware team
$ ~

one of the links i tried (as mentioned above): Notes of a Programmer: VMWare Tools Failed to Load on Ubuntu 13.10 (Saucy)   - it did not help.

Home Sharing Stops Working After a Few Minutes

Since upgrading to 10.6.1.7, iTunes spontaneously stops Home Sharing after some minutes of playing back content via my Apple TV Gen 3. The Apple TV which had just been in the middle of playing content, reverts back to the home screen with a message about Home Sharing at the top. If I then click on Computers, it informs me that I should turn on Home Sharing in iTunes. It is already turned on as I was just in the middle of using it. The computer and the Apple TV are plugged into the same switch. The only work-around that I've found is to exit the iTunes application an restart it each time that it fails every few minutes. This makes watching content incredibly exasperating. Are there any better work-arounds with more longevity? This problem effectively makes the Apple TV a worthless device, and I may be returning it soon.

Same issue exactly. Best thing to di is contact Apple so that they become aware of this regression. Below is what I have been posting:
Home sharing with the new Apple TV / iTunes update is just broke. Only works for a bit unless you restart iTunes or disable / re-enable Home Sharing. Use to work great until the last updates. This is not a network (router, firewall, ...) issue - just a (bad) regression in Apples software. Hopefully they fix this soon, hard to believe its been broke this long already. The Remote app update also fails to connect to Apple TVs (but does connect to iTunes) for many people as well. Poor QA all around. :(
I have yet to see any suggestion that actually works other than reverting to previous versions of fwr / iTunes - which is a pain / joke to do.
There are a *ton* of posts about this:
https://discussions.apple.com/message/18078180#18078180
https://discussions.apple.com/message/18078351#18078351
https://discussions.apple.com/message/18078326#18078326
https://discussions.apple.com/message/18078599#18078599
https://discussions.apple.com/message/18078600#18078600
https://discussions.apple.com/message/18087017#18087017
https://discussions.apple.com/message/18082439#18082439
https://discussions.apple.com/message/18086263#18086263
https://discussions.apple.com/message/18083552#18083552
https://discussions.apple.com/message/18103713#18103713
https://discussions.apple.com/message/18106478#18106478
etc...

MacBook Pro unable to boot up [Stop Sign], after rEFIt Installation

I was trying to install Windows on my MacBook Pro, Intel Based.
Followed this tutorial, http://riactant.wordpress.com/2009/02/25/install-windows-on-boot-camp-using-exte rnal-usb-optical-drive/
Downloaded and installed rEFIt and rebooted my MacBook Twice.
After rebooting twice, my MacBook no longer boots up.
It will stay at the apple logo until it turns into a stop sign, a circle with a slash across.
I have searched desperately for a method but came to no conclusion.
When i did command + s, It keeps saying "Searching for root device", or something along that line.
When I tried to boot from my Installation disc while holding down C.
I went into Disk Utility and my Mac HD was renamed to disk0s2.
I am very afraid that my data will be lost, all my freelance invoices and work will be gone.
I am unable to go into safe mode.
I am VERY sure this happened immediately after I installed rEFIt.
If only there's a way for me to somehow restore to the moment before I installed this software.

If you've never backed anything up because you weren't expecting to need backups, you would have lost all your data sooner or later no matter what else you did. Fooling unnecessarily with rEFIt just brought it about a little sooner.
Replace your hard drive before messing around with it any more. Once you get a new drive installed and your machine back up and running, mount the old one in an external enclosure and see whether data recovery software can salvage any of your files.
Data Rescue: http://www.prosofteng.com/products/data_rescue.php
FileSalvage: http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
Both utilities are offered in demo versions that will show you what the full version could recover before you have to pay for anything.

OKI C301 laser printer stopped functioning after latest OSX security update

Hi,
The printer was functioning perfecty before the update. It is connected to the the router and through Wi-Fi with an iMac and a MacBook Air.
After updating to 10.9.2 it pops an error message when trying to print anything.
Here are the first lines of the error message I get:
Process:         OKIHC004 [25701]
Path:            /Library/Printers/OKIDATA/Filters/OKIHC004.plugin/Contents/MacOS/OKIHC004
Identifier:      OKIHC004
Version:         2.0.0 (2.0.0)
Code Type:       X86 (Native)
Parent Process: cupsd [125]
Responsible:     cupsd [125]
User ID:         26
Date/Time:       2014-03-04 14:27:13.166 +0200
OS Version:      Mac OS X 10.9.2 (13C64)
Report Version: 11
Anonymous UUID: 6DEC289F-2E1E-E102-07E0-4700D1EFC10E
Sleep/Wake UUID: 1DAA4DED-30EE-41DD-82A3-3539DFA3BC4F
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
VM Regions Near 0:
--> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL /Library/Printers/OKIDATA/Filters/OKIHC004.plugin/Contents/MacOS/OKIHC004
    __TEXT                 0000000000001000-0000000000019000 [   96K] r-x/rwx SM=COW /Library/Printers/OKIDATA/Filters/OKIHC004.plugin/Contents/MacOS/OKIHC004
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.apple.CoreFoundation                0x9bfbad02 CFArrayGetValueAtIndex + 18
1   com.okidata.print.OKIHC004              0x00003249 IsIP(char const*) + 99
2   com.okidata.print.OKIHC004              0x00003d02 main + 842
3   com.okidata.print.OKIHC004              0x00002a4b _start + 209
4   com.okidata.print.OKIHC004              0x00002979 start + 41
Thread 1:
0   libsystem_kernel.dylib                  0x96786046 __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x93d46dcf _pthread_wqthread + 372
2   libsystem_pthread.dylib                 0x93d4acce start_wqthread + 30
Any ideas?

Thanks for your reply,
I 've checked that thread.
It seems that since then, OKI has acknowledged the issue and has instructions on their site
(which I had followed during setup, so the printer was working until now)
http://www.okidata.com/mac-mavericks-driver-support
When removing the OKIHC004.plugin file, I get this message
You need to install software to use this printer. To install the software, choose Software Update from the Apple menu. If the software for your printer isn’t available in Software Update, contact the manufacturer of your printer.
Another issue is that on OKI's site, my model is no longer listed when searching for drivers to download!
http://www.okidata.com/drivers

[solved] Network stopped working after update

Hi,
I have been working on this problem for some time now with no success. I searched the forums and found threads like this, which did not seem to work for me. I hope it is (as always) just a stupid mistake I made.
After a bigger update (not using the machine for half a year) I cannot get my network back to work. I am talking about wired network, though wireless network has a similar problem. I verified the hardware via a Windows dualboot.
I think this problem is DHCP related:
# dhcpcd enp2s0
dhcpcd[563]: version 6.0.5 starting
dhcpcd[563]: enp2s0: waiting for carrier
dhcpcd[563]: enp2s0: carrier acquired
dhcpcd[563]: enp2s0: carrier lost
dhcpcd[563]: enp2s0: waiting for carrier
dhcpcd[563]: enp2s0: carrier acquired
dhcpcd[563]: enp2s0: soliciting a DHCP lease
dhcpcd[563]: timed out
dhcpcd[563]: exited
I usually run NetworkManager and dhcpcd, but also tried wicd and dhclient which did not help either.
I have no idea which outputs can be helpful in this matter, so I will provide them on demand. Thanks in advance.
Last edited by CommanderCool (2013-09-11 09:40:26)

I just want to add that connecting with a static IP works flawlessly. I am trying to connect to a Fritz Box 7270, if that helps. I have the same problem on another machine. The problem occured with the update from dhcpcd 5.6.4-2 to 6.0.5-1, I guess, but I cannot be absolutely sure.
I already tried commenting out the "require dhcp server_identifier" option of dhcpcd, which did noch change anything. I am really lost here, so any hint would help.

Lost home network on WiFi after updating to 10.6.8

Updated my iMac and wife's Macbook to OSX10.6.8 and have lost WiFi connection to each other. We can both access the internet but her Macbook cannot access the printer connected to my iMac. We can connect without any problems using ethernet wire but, as we work in different parts of the house this wastes so much valuable working time carrying the laptop back and forth. It is not an option to go back to using wire links in our situation. We have tried all the suggetsions that have been offered in various forums but none of them work for us.
What has Apple done to us? We have both been singing the praises of Macs for years but this is beginning to shake our faith immensely!
If all else fails, how difficult is it to regress to a previous incarnation of 10.6?

Hi Bob
I'm still figuring my way around this so before you read any further this is nit an answer to your problem; however I am having the same problem, sort of; just a few days now I noticed that when connecting to the internet wirelessly via my router, the connection would inexplicably fail. In order to carry on working I connected the Mac to the router using ethernet and all is, and stays ok. Go back to trying to use a wirerless link, after a short period of time it fails again; I'm not too sure of the way things allwork but I notice that my wife's iPad is working fine wirelssly, as is my airport express, and indeed the printer. So wireless between my Mac and everything else bar the router is fine.
When trying to use the wireless option in network prefs, Ive noticed that after a certain period of time the ISP, Server and Network lights in Network Status under Diagnostics change from all green to either amber or red.
As I said this happened real sudden say 4 days ago. My Mac is new purchased December just gone. I'm really confused as to what to do, and sadly I'm not knowledgable to work oiut where the fault lies, is it my router somehow, or is it the Mac?
Any help would be greatly appreciated.

Wireless Network has "disappeared" after Leopard installation

We have 2 Macs, my MacPro (connected by wire to ADSL) and an iMac (connecting to my wireless router to the same ADSL line). The iMac uses Airport to reach my wireless router, connecting to "Joe's Network." (MacPro --> D-Link Modem --> D-Link Wireless Router --> iMac Airport) This has worked fine for about 2 years.
After installing Leopard yesterday, the iMac does not show "Joe's Network," and I don't know how to restore it. Other networks in the neighborhood show up in the iMac's Airport listing, and the unsecured ones CAN be connected to. This indicates to me that there is nothing wrong with the iMac. I unplugged and replugged the modem and router on my MacPro, but nothing is working.
Can someone point me in the right direction?

Ahh, welcome to the wonderful world of wifi under Leopard. Maybe you weren't aware that tens of thousands of people have been having endless problems with wifi whilst using Leopard .... I just got back from holiday - full signal yet no internet. Connect using ethernet and there it is - working perfectly. The culprit? Apple's very own Airport extreme base station, the new one which I bought thinking my old one was on the blink - nope.
Meanwhile Apple have not said a word about this in the last 8-10 weeks of utter misery for countless people - not a sausage. Many people are counting on 10.5.2 fixing this. I say don't count on it. Remember to complain to Apple as it is their own software/hardware that is at fault here. Meanwhile, they introduce a ... wifi laptop.... ooh the irony.

No phone service after FIOS installation

Can someone please help me. We have had no phone service since a crew installed FIOS on part of our street Sept. 20th. Went through troubleshooting online and final step is to call for help...hard to do since the phone has no dial tone.

Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Home network stopped functioning after FIOS installation

Similar Messages

Maybe you are looking for