Home Page Structure and Components
We are facing some performance problems with the home page of our intranet (based on SAP EP5 SP6 - Migration to EP6 is starting) and we fair that the number of objects on the home page is dramatically impacting the load time.
We are interested to get the following informations for other companies :
o How many objects / components are loaded on the home page ?
o To have a printscreen of the homepage
o To have an overview of the laoding time (average) of the homepage.
In our situation we have about 100 objects on the homepage and the average response time is about 9 sec. I will post a printscreen soon.
Thanks for your responses - Philippe
Hi Philippe
Read How to
Optimize And Fine-Tune SAP Enterprise Portal 5.0 document
if u haven't it mail me on [email protected] i'll send it u.
regards,
kaushal
Similar Messages
-
Dynamic Structure and Components Issue
Hi,
I have a requirement of creating an inbound idoc program and populating dynamic structures. The program for the dynamic structure creation is as follows: ( I have been referencing Heilmans Blog ): The part for the inbound idoc creation works fine. The data will come in a flat file with Table name and 15 characterstcis. The table name is known at runtime. I need to create the dynamic table, find out the components and then populate the custom table with the dynamically created structures.
Custom table: 4 components
Internal table from file: 15 components with value.
There could be more than one table in the flat file and not all components or char in the flat file is mapped to the table.
I have been able to code the part where the components in the structure and the file components are in the same order. The problem is if the components in the structure and the file components are not in the same order. I would appreciate some inputs in this issue.
The part that has to be worked out is:
IF NOT L_TABNAME IS INITIAL.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
ENDIF.
*& Report /FACTGLB/GTDMI_VARTAB_IDOCS02 *
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-07-02
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
REPORT ZGTDMI_VARTAB_IDOCS_DYNAMIC
NO STANDARD PAGE HEADING
LINE-SIZE 150
LINE-COUNT 55
MESSAGE-ID zfactglb.
**Include for Global Data Declaration
*INCLUDE /FACTGLB/GTDMI_VARTAB_TOP02.
**Include for Selection Screen
*INCLUDE /FACTGLB/GTDMI_VARTAB_SEL02.
**Include for Sub Routines
*INCLUDE /FACTGLB/GTDMI_VARTAB_FORMS02.
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP
*& Include /FACTGLB/GTDMI_VARTAB_TOP
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-07-02
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
TYPE POOLS
*Type declaration for ALV display
TYPE-POOLS : slis.
Include .
type-pools: col, "#EC *
icon, "#EC *
sym, "#EC *
abap. "#EC *
Target structure definitions
tables:
E1CUVTM, "#EC *
E1DATEM, "#EC *
E1CUV1M, "#EC *
edp21, "#EC *
edi_dc40, "#EC *
edi_dd40, "#EC *
edi_ds40. "#EC *
GLOBAL TYPES
TYPES : BEGIN OF ty_vartab.
include structure E1CUVTM.
TYPES: END OF ty_vartab.
TYPES : BEGIN OF ty_vartabdate.
INCLUDE STRUCTURE E1DATEM.
TYPES : END OF ty_vartabdate.
*Structure for data retreived
TYPES : BEGIN OF ty_vardetails.
INCLUDE STRUCTURE E1CUV1M.
TYPES : END OF ty_vardetails.
*Structure for data retreived from table tabinput.
TYPES : BEGIN OF ty_tabinput,
lines type string,
END OF ty_tabinput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_dsninput, "#EC *
LINE(101) type c,
END OF ty_dsninput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_newinput, "#EC *
LINE(101) type c,
flag(1) type c,
END OF ty_newinput.
*Structure for keeping the values of all the custom tables
TYPES : BEGIN OF ty_custom_tabs,
matnr TYPE matnr, "Material Number
werks TYPE werks_d, "Plant
lgort TYPE lgort_d, "Storage Location
qunty TYPE P DECIMALS 2, "Standard Order Quantity
det_loc TYPE CHAR6, "Detail Location
class TYPE CHAR2, "Class
rate TYPE P DECIMALS 2, "Rate
END OF ty_custom_tabs.
*Type declared for the internal table and work area which will store
*fields for error log
TYPES : BEGIN OF ty_error_log,
matnr TYPE matnr, "Material Number
mtart TYPE mtart, "Material Type
sel_data TYPE char10, "No of selectyed data
END OF ty_error_log.
*Structure for keeping the output data
TYPES : BEGIN OF ty_final,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
END OF ty_final.
TYPES: begin of TY_CONTENTHD,
VTNAM(018) type C,
FLAG(001) type C,
end of TY_CONTENTHD.
TYPES: begin of TY_CONTENT,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
Z_VARCOND TYPE VARCOND.
TYPES: end of TY_CONTENT.
TYPES: begin of TY_CONTENTTAB,
VTNAM(018) type C,
COMP1(30) TYPE C,
CHAR1(030) type C,
COMP2(30) TYPE C,
CHAR2(030) type C,
COMP3(30) TYPE C,
CHAR3(030) type C,
COMP4(30) TYPE C,
CHAR4(030) type C,
COMP5(30) TYPE C,
CHAR5(030) type C,
COMP6(30) TYPE C,
CHAR6(030) type C,
COMP7(30) TYPE C,
CHAR7(030) type C,
COMP8(30) TYPE C,
CHAR8(030) type C,
COMP9(30) TYPE C,
CHAR9(030) type C,
COMP10(30) TYPE C,
CHAR10(030) type C,
COMP11(30) TYPE C,
CHAR11(030) type C,
COMP12(30) TYPE C,
CHAR12(030) type C,
COMP13(30) TYPE C,
CHAR13(030) type C,
COMP14(30) TYPE C,
CHAR14(030) type C,
COMP15(30) TYPE C,
CHAR15(030) type C,
FLAG(001) type C.
TYPES: end of TY_CONTENTTAB.
TYPES: BEGIN OF TY_E1CUVTM,
MSGFN TYPE MSGFN,
VAR_TAB TYPE APITABL,
STATUS TYPE RCUTBST,
VTGROUP TYPE RCUTBGR,
AUTHSTRUC TYPE RCUTBBE,
AUTHENTRY TYPE RCUFNBI,
FLDELETE TYPE FLLKENZ,
DBTABNAME TYPE TABNAME16,
DBCONACTIVE TYPE DBCON_ACTI,
PRESDEC TYPE VTDCT,
END OF TY_E1CUVTM.
TYPES: BEGIN OF TY_E1CUV1M,
MSGFN TYPE MSGFN,
VTLINENO TYPE VTLINENO,
VTCHARACT TYPE ATNAM,
ATWRT TYPE ATWRT,
ATFLV TYPE ATFLV,
ATAWE TYPE MSEHI,
ATFLB TYPE ATFLB,
ATAW1 TYPE MSEHI,
ATCOD TYPE ATCOD,
ATTLV TYPE ATTLV,
ATTLB TYPE ATTLB,
ATPRZ TYPE ATPRZ,
ATINC TYPE ATINC,
VTLINENO5 TYPE VTLINENO5,
END OF TY_E1CUV1M.
TYPES: BEGIN OF TY_E1DATEM,
MSGFN TYPE MSGFN,
KEY_DATE TYPE SYDATUM,
AENNR TYPE AENNR,
EFFECTIVITY TYPE CC_MTEFF,
END OF TY_E1DATEM.
TYPES: BEGIN OF ty_vtnam,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Name of variant table
dbtab_name type tabname16, "Custom table Name
error TYPE char1, " Indicates error in data format
reas TYPE char50, " Reason for failure
END OF ty_vtnam.
Get data type for characteristic
TYPES: BEGIN OF ty_cabn,
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
atfor TYPE atfor, "Data type of characteristic
atson TYPE atson, "Indicator: Additional Values
atprt TYPE atprt, "Check table
atprr TYPE atprr, "Name of Check Report Program
atprf TYPE atprf, "Function Module for Checking Values
anzdz TYPE anzdz, "Number of Decimal Places
check TYPE char1, "Indicates check required or not
END OF ty_cabn.
Get field names of variant table
TYPES: BEGIN OF ty_cuvtab_fld,
vtint TYPE vtint, " Internal number of variant table
atinn TYPE atinn, " Internal characteristic
vtpos TYPE vtpos, " Item number of characteristic in variant
*mod-012
DBFLD type NAME_FELD,
*mod-012
exist TYPE char1, " X Indictaes characteristic is part of fil
END OF ty_cuvtab_fld.
Store all data in internal table
TYPES: BEGIN OF ty_file,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
flag TYPE char1,
error TYPE char50,
END OF ty_file.
To check for duplicates
TYPES: BEGIN OF ty_dupl,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
slnid TYPE slnid,
END OF ty_dupl.
Get previously loaded characteristic values for internal table (CHAR)
TYPES: BEGIN OF ty_cuvtab_valc,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
valc TYPE atwrt, " Characteristic Value
END OF ty_cuvtab_valc.
Get previously loaded characteristic values for internal table (NUM)
TYPES: BEGIN OF ty_cuvtab_valn,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
val_from TYPE atflv, " Internal floating point from
END OF ty_cuvtab_valn.
Store column positions of characteristics
TYPES: BEGIN OF ty_col_pos,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Variant table name
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
field TYPE fieldname, "Field name
req TYPE char1, " Required or not
vtpos TYPE vtpos, " Item number of characteristics
DBFLD type NAME_FELD, " Field Name of Custom table.
END OF ty_col_pos.
Store valid values for characteristics
TYPES: BEGIN OF ty_cawn,
atinn TYPE atinn, " Internal characteristic
atzhl TYPE atzhl, " Int counter
atwrt TYPE atwrt, " Characteristic Value
atflv TYPE atflv, " Internal floating point from
lkenz TYPE lkenz, " Deletion indicator
END OF ty_cawn.
Store error messages for individual lines
TYPES: BEGIN OF ty_error,
vtnam TYPE vtnam, " Variant table name
fname TYPE fieldname, " Fieldname
atnam TYPE atnam, " Characteristic name
atwrt TYPE atwrt, " Characteristic value
row TYPE char5, " Row id
END OF ty_error.
Begin TPR# 4618
To store unique number for variant
TYPES: BEGIN OF ty_vnt_ma,
vtnam TYPE vtnam,
unique_no TYPE ZGTDM_UNQN,
no_chr TYPE ZGTDM_NO_CHR,
END OF ty_vnt_ma.
TYPES: BEGIN OF ty_dbtab,
vtint TYPE vtint,
vtnam TYPE vtnam,
DBTAB_NAME TYPE TABNAME16,
END OF ty_dbtab.
To find out concatenated number for
TYPES: BEGIN OF ty_split,
f1 TYPE char6,
END OF ty_split.
TYPES: BEGIN OF ty_charval,
char TYPE char30,
END OF ty_charval.
TYPES: BEGIN OF TY_DATA,
name TYPE string,
value(15) type c,
END OF TY_DATA.
DATA: I_DATATAB TYPE STANDARD TABLE OF TY_DATA.
TYPES:
TUMLS_MESSTYPE type /SAPDMC/LS_MESSTYPE,
TUMLS_MESSTYPETXT type EDI_TEXT60,
TUMLS_MESSCODE type EDIPMESCOD.
TYPES:
TUMLS_TABNAME TYPE TABNAME, "#EC *
TUMLS_SEGMENT TYPE TABNAME. "#EC *
TYPES:
TUMLS_PATHFILE TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILENAME TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILETEXT TYPE /SAPDMC/LS_FILETEXT.
TYPES:
BEGIN OF type_errorline,
msgty type SYMSGTY,
id type SYMSGID,
msgno type symsgno,
par1 type symsgv,
par2 type symsgv,
par3 type symsgv,
par4 type symsgv,
END OF type_errorline.
TYPES:
type_errortab TYPE SORTED TABLE
OF type_errorline
WITH NON-UNIQUE KEY id msgno par1 par2 par3 par4.
DATA:
LV_INDEX TYPE SY-INDEX,
LV_INDEX2 TYPE SYINDEX,
LV_TABLE1 TYPE REF TO DATA,
LV_TABLE2 TYPE REF TO DATA,
LV_TABLE3 TYPE REF TO DATA,
LV_TABLE4 TYPE REF TO DATA,
LV_LINE1 TYPE REF TO DATA,
LV_LINE2 TYPE REF TO DATA,
LV_LINE3 TYPE REF TO DATA,
LV_LINE4 TYPE REF TO DATA,
LV_OFFSET1 TYPE SYTABIX,
ST_IS_LAYOUT_ALV TYPE SLIS_LAYOUT_ALV,
L_IT_FCATLOG_ALV TYPE SLIS_T_FIELDCAT_ALV,
L_IT_FLDCAT TYPE LVC_T_FCAT.
GLOBAL INTERNAL TABLES
DATA : i_newinput TYPE STANDARD TABLE OF ty_newinput INITIAL SIZE 0."#EC *
DATA : i_contentheader1 TYPE STANDARD TABLE OF ty_contenthd INITIAL SIZE 0."#EC *
DATA : i_contenttab1 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab2 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab3 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab4 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab5 TYPE STANDARD TABLE OF ty_contenttab INITIAL SIZE 0."#EC *
DATA : i_E1CUV1M TYPE STANDARD TABLE OF E1CUV1M INITIAL SIZE 0."#EC *
DATA : i_errortab TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
GLOBAL WORK AREAS
**Internal Table for the structure TY_T001L
DATA : wa_vartab TYPE ty_vartab. "#EC *
DATA : wa_vartabdate TYPE ty_vartabdate. "#EC *
DATA : wa_vardetails TYPE ty_vardetails. "#EC *
DATA : wa_tabinput TYPE ty_tabinput. "#EC *
DATA : wa_dsninput TYPE ty_dsninput. "#EC *
DATA : wa_newinput TYPE ty_newinput. "#EC *
DATA : wa_gnewinput TYPE ty_newinput. "#EC *
DATA : wa_ginput_data TYPE ty_newinput. "#EC *
DATA : wa_final TYPE ty_final. "#EC *
DATA : wa_content TYPE ty_content. "#EC *
DATA : wa_contenthd TYPE ty_contenthd. "#EC *
DATA : wa_contentheader type ty_contenthd. "#EC *
DATA : wa_contenttab TYPE ty_content. "#EC *
DATA : wa_content1 TYPE ty_content. "#EC *
DATA : wa_contenthd1 TYPE ty_contenthd. "#EC *
DATA : wa_contentheader1 type ty_contenthd. "#EC *
DATA : wa_contenttab1 TYPE ty_content. "#EC *
DATA : wa_contenttab2 TYPE ty_content. "#EC *'
DATA : wa_contenttab3 TYPE ty_content. "#EC *
DATA : wa_contenttab4 TYPE ty_content. "#EC *
DATA : wa_contenttab5 TYPE ty_contentTAB. "#EC *
DATA : wa_E1CUVTM TYPE E1CUVTM. "#EC *
DATA : wa_E1CUV1M TYPE E1CUV1M. "#EC *
DATA : wa_E1DATEM TYPE E1DATEM. "#EC *
DATA : wa_error_tab TYPE solisti1. "#EC *
INTERNAL TABLES AND WORK AREAS FOR BDC
*Internal Table to store the data to display the error message
DATA : i_errormsg TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
*Internal Table to store the data to display the error message
DATA : i_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
DATA : itab_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
**Work area to store the data to display the error message
DATA : wa_errormsg TYPE solisti1. "#EC *
**Internal table which will store data for the error log
DATA:i_error_log TYPE STANDARD TABLE OF ty_error_log INITIAL SIZE 0."#EC *
GLOBAL VARIABLES
DATA: G_FILE TYPE string. "#EC *
DATA : g_ctr_input_recs(5) type c. "#EC *
DATA: g_ctr_output_recs(5) type p. "#EC *
data : g_msg(100) type c. "#EC *
data: g_struct_file TYPE string. "#EC *
data: g_login type FILEINTERN. "#EC *
data: g_phyin type string. "#EC *
DATA: g_lprnt type RSPOPSHORT. "#EC *
DATA: g_FNAME1 TYPE STRING. "#EC *
DATA : g_repid TYPE repid, "#EC *
g_exit(1) TYPE C, "#EC *
gx_variant type disvariant. "#EC *
DATA : g_lines TYPE i . "#EC *
data : g_save(1) type c. "#EC *
DATA : g_splid TYPE rspoid . "#EC *
data: p_login type FILEINTERN. "#EC *
data: p_phyin type string. "#EC *
DATA:
go_table TYPE REF TO cl_salv_table,
go_sdescr TYPE REF TO cl_abap_structdescr,
go_tdescr TYPE REF TO cl_abap_tabledescr,
gdo_data TYPE REF TO data,
gdo_handle TYPE REF TO data,
gs_comp TYPE abap_componentdescr,
gt_components TYPE abap_component_tab.
FIELD-SYMBOLS:
TYPE table.
GLOBAL CONSTANTS
CONSTANTS c_msgar TYPE rslgarea VALUE 'F8'. "#EC *
CONSTANTS c_msgid TYPE rslgsubid VALUE 'E'. "#EC *
CONSTANTS c_urgnc TYPE char04 VALUE 'HIGH'. "#EC *
CONSTANTS C_X(1) TYPE C VALUE 'X'. "#EC *
CONSTANTS C_Y(1) TYPE C VALUE 'Y'. "#EC *
CONSTANTS C_Z(1) TYPE C VALUE 'Z'. "#EC *
CONSTANTS C_E(1) TYPE C VALUE 'E'. "#EC *
CONSTANTS C_SAP(3) TYPE C VALUE 'SAP'. "#EC *
CONSTANTS C_MOD(3) TYPE C VALUE 'MOD'. "#EC *
CONSTANTS C_MD1(3) TYPE C VALUE 'MD1'. "#EC *
CONSTANTS C_MD2(3) TYPE C VALUE 'MD2'. "#EC *
CONSTANTS C_MD3(3) TYPE C VALUE 'MD3'. "#EC *
CONSTANTS C_MD4(3) TYPE C VALUE 'MD4'. "#EC *
CONSTANTS C_MD5(3) TYPE C VALUE 'MD5'. "#EC *
constants: c_000001(6) type c value '000001', "#EC *
c_e1cuv1m(7) type c value 'E1CUV1M', "#EC *
c_02(2) type c value '02', "#EC *
c_009(3) type c value '009', "#EC *
c_0001(4) type c value '0001'. "#EC *
constants: c_e1datem(7) type c value 'E1DATEM'. "#EC *
constants: c_e1cuvtm(7) type c value 'E1CUVTM'. "#EC *
GLOBAL INTERNAL TABLES FOR ALV DISPLAY
*Internal tables for ALV Field cat
DATA :
i_fieldcat_ov TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_dtl TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_ov1 TYPE lvc_t_fcat, "#EC *
i_events TYPE slis_t_event. "#EC *
GLOBAL WORK AREAS FOR ALV DISPLAY
*Work area for ALV Field layout
DATA : wa_layout TYPE slis_layout_alv. "#EC *
*Work area for Field Cat. Table
DATA : wa_fieldcat TYPE slis_fieldcat_alv. "#EC *
GLOBAL VARIABLES FOR ALV DISPLAY
DATA : g_event TYPE slis_t_event. "#EC *
DATA : g_top_of_page TYPE slis_t_listheader. "#EC *
DATA : g_ok_code TYPE char4. "#EC *
DATA : g_variant type disvariant. "#EC *
GLOBAL CONSTANTS FOR ALV DISPLAY
BAL handling
data: iv_log_handle type BALLOGHNDL. "#EC *
data: is_log_header type bal_s_log. "#EC *
data: iv_object type bal_s_log-object value 'CAPI'. "#EC *
data: iv_subobject type bal_s_log-subobject value 'CAPI_LOG'."#EC *
data: iv_tcode type bal_s_log-altcode value 'SE38'. "#EC *
*MOD-005
RANGES:
R_MESTYP FOR EDIDC-MESTYP, "#EC *
R_CREDAT FOR EDIDC-CREDAT, "#EC *
R_CRETIM FOR EDIDC-CRETIM, "#EC *
R_SNDPRT FOR EDIDC-SNDPRT, "#EC *
R_SNDPRN FOR EDIDC-SNDPRN. "#EC *
DATA:
L_MESSTYPE TYPE TUMLS_MESSTYPE. "#EC *
*MOD-005
data: p_sndprn TYPE EDI_SNDPRN, "#EC *
p_sndprt TYPE EDI_SNDPRT, "#EC *
p_sndpor TYPE EDI_SNDPOR. "#EC *
data: p_rcvprn TYPE EDI_RCVPRN, "#EC *
p_rcvprt TYPE EDI_RCVPRT, "#EC *
p_rcvpor TYPE EDI_RCVPOR. "#EC *
data:
init_E1CUVTM type E1CUVTM, "#EC *
prev_E1CUVTM type E1CUVTM, "#EC *
init_E1DATEM type E1DATEM, "#EC *
prev_E1DATEM type E1DATEM, "#EC *
init_E1CUV1M type E1CUV1M, "#EC *
prev_E1CUV1M type E1CUV1M. "#EC *
Source structure definitions
data:
begin of LSMW_TAB_CONTENT, "#EC *
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
end of LSMW_TAB_CONTENT.
Counters
data:
g_cnt_VAR_TAB type i, "#EC *
g_cnt_TAB_CONTENT type i. "#EC *
Counter ct_xxxxxxxxxx: number of transferred records
data:
ct_edi_dc40 type i, "#EC *
cs_edi_dc40 type i, "#EC *
ct_E1CUVTM type i, "#EC *
cs_E1CUVTM type i, "#EC *
ct_E1DATEM type i, "#EC *
cs_E1DATEM type i, "#EC *
ct_E1CUV1M type i, "#EC *
cs_E1CUV1M type i. "#EC *
Global data definitions and data declarations
DATA: wa_cabn TYPE ty_cabn,
wa_cawn TYPE ty_cawn,
wa_file TYPE ty_file,
wa_vtnam TYPE ty_vtnam,
wa_cuvtab_fld TYPE ty_cuvtab_fld,
wa_cuvtab_valn TYPE ty_cuvtab_valn,
wa_cuvtab_valc TYPE ty_cuvtab_valc,
wa_col_pos TYPE ty_col_pos,
wa_error TYPE ty_error,
wa_dupl TYPE ty_dupl,
wa_dupl_file TYPE ty_dupl.
DATA: wa_vnt_ma TYPE ty_vnt_ma,
wa_split TYPE ty_split.
DATA: wa_charval TYPE ty_charval. "#EC *
Internal table
DATA: i_cabn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_temp TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_atinn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_file TYPE STANDARD TABLE OF ty_file, "#EC *
i_file_tmp TYPE STANDARD TABLE OF ty_file, "#EC *
i_vtnam TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab_fld TYPE STANDARD TABLE OF ty_cuvtab_fld, "#EC *
i_cuvtab_valn TYPE STANDARD TABLE OF ty_cuvtab_valn, "#EC *
i_cuvtab_valc TYPE STANDARD TABLE OF ty_cuvtab_valc, "#EC *
i_col_pos TYPE STANDARD TABLE OF ty_col_pos, "#EC *
i_cawn TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_n TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_c TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_i TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cuv_error TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_dupl TYPE STANDARD TABLE OF ty_dupl, "#EC *
i_dbtab TYPE STANDARD TABLE OF ty_dbtab. "#EC *
DATA: i_vnt_ma TYPE STANDARD TABLE OF ty_vnt_ma, "#EC *
i_split TYPE STANDARD TABLE OF ty_split. "#EC *
DATA: i_dupl_file TYPE STANDARD TABLE OF ty_dupl. "#EC *
DATA: i_charval TYPE STANDARD TABLE OF ty_charval. "#EC *
Constants
CONSTANTS: c_char TYPE atfor VALUE 'CHAR', "#EC *
c_date TYPE atfor VALUE 'DATE', "#EC *
c_time TYPE atfor VALUE 'TIME', "#EC *
c_varcond TYPE atnam VALUE 'Z_VARCOND'. "#EC *
Field Symbols
FIELD-SYMBOLS: TYPE ANY.
Variables
DATA: g_raw(500) TYPE c, "#EC *
g_invalid TYPE char1, "#EC *
g_error TYPE char1, "#EC *
g_message TYPE char50, "#EC *
g_slnid_c TYPE slnid, "#EC *
g_slnid_n TYPE slnid, "#EC *
g_row TYPE char5. "#EC *
DATA: g_varcond TYPE varcond, "Variant condition "#EC NEEDED
g_split_var TYPE i. "#EC *
Types: begin of ty_charname,
name type atnam,
end of ty_charname.
data: wa_charname type ty_charname, "#EC *
i_charname type standard table of ty_charname. "#EC *
data: cnt_i type i, "#EC *
g_tabix type char10. "#EC *
Types: begin of ty_itab_zedidc40.
include structure edi_dc40.
TYPES: end of ty_itab_zedidc40.
Types: begin of ty_itab_zedidd40.
include structure edi_dd40.
TYPES: end of ty_itab_zedidd40.
DATA: itab_zedidc40 type standard table of
ty_itab_zedidc40 initial size 0. "#EC *
DATA: itab_zedidd40 type standard table of
ty_itab_zedidd40 initial size 0. "#EC *
DATA: wa_itab_zedidc40 type ty_itab_zedidc40.
DATA: wa_itab_zedidd40 type ty_itab_zedidd40.
*MOD-009
data: itab_ze1cuvtm type e1cuvtm, "#EC *
itab_ze1datem type e1datem, "#EC *
itab_ze1cuv1m type e1cuv1m. "#EC *
data: wdocnum(16) type n value 0. "#EC *
data: wsegnum(6) type n value 0. "#EC *
data: witemno(10) type n value 0. "#EC *
data: witemno_new(10) type n value 0. "#EC *
data: witemno_gst(10) type n value 0. "#EC *
data: witemno_qst(10) type n value 0. "#EC *
TYPES: BEGIN OF ty_input_data1, "#EC *
line(560) type c,
flag(1) type c,
END OF ty_input_data1.
DATA: i_input_data type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: i_input_data1 type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: wa_input_data type ty_input_data1. "#EC *
DATA: g_cnt_input_recs type i. "#EC *
DATA: g_flg_error type c. "#EC *
DATA: l_lines type i. "#EC *
DATA: l_lines_varcond type i. "#EC *
DATA: l_lines1 type i. "#EC *
DATA: l_tabix type i. "#EC *
DATA: wa_input_data1 type ty_input_data1. "#EC *
DATA: FILE TYPE STRING.
Fields that are made available to the user:
DATA:
g_cnt_records_read TYPE i, "#EC *
g_cnt_records_transferred TYPE i, "#EC *
g_cnt_transactions_read TYPE i, "#EC *
g_cnt_transactions_transferred TYPE i, "#EC *
g_cnt_idocs_package TYPE i. "#EC *
data: v_log_handle type balloghndl. "#EC *
DATA: gt_curr_edi_dc40 TYPE STANDARD TABLE OF edi_dc40 initial size 0."#EC *
DATA: gt_curr_edi_dd40 TYPE STANDARD TABLE OF edi_dd40 initial size 0."#EC *
DATA: wa_curr_edi_dc40 TYPE edi_dc40. "#EC *
DATA: wa_curr_edi_dd40 TYPE edi_dd40. "#EC *
internal table for error messages during conversion
DATA: g_error_tab TYPE type_errortab, "#EC *
wa_errortab TYPE type_errorline. "#EC *
DATA: g_edidd_segnam type EDI4SEGNAM, "#EC *
g_edidd_hlevel type EDI4HLEVEC. "#EC *
DATA: g_segnum(6) TYPE n.
DATA: g_objecttype(2) type C.
DATA: P_FNAME(128) TYPE C VALUE '/usr/sap/trans/vartabheader'. " MODIF ID MD1 OBLIGATORY.
DATA: P_FNAME1(128) TYPE C VALUE '/usr/sap/trans/vartabcontent'. " MODIF ID MD1 OBLIGATORY.
DATA: alv_fldcat TYPE slis_t_fieldcat_alv,
it_fldcat TYPE lvc_t_fcat.
field-symbols: .
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
data: l_wa_data TYPE TY_CONTENT,
l_tabname TYPE tabname,
itab_data TYPE standard table of TY_CONTENT.
DATA: l_len_slnid TYPE i, "#EC NEEDED
l_len_varcond TYPE i, "#EC NEEDED
l_temp_slnid TYPE i, "#EC NEEDED
l_temp_slnc TYPE char5, "#EC NEEDED
l_temp_varcond TYPE varcond, "#EC NEEDED
l_sub_var TYPE i, "#EC NEEDED
l_val_split TYPE char10. "#EC NEEDED
DATA: l_invalid. "#EC NEEDED
DECLARATION FOR SELECTION SCREEN
*selection-screen skip 1.
*For all the input field entries
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
*Parameter for Input File Name:
PARAMETERS: p_inpt TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File Variant table
PARAMETERS: p_inpt1 TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File variant Content
SELECTION-SCREEN END OF BLOCK bl1.
IDoc creation
selection-screen begin of block idocpars
with frame title text-006.
parameters:
p_trfcpt as checkbox default C_X MODIF ID MD3,
p_packge(5) type n default 1 MODIF ID MD3.
selection-screen end of block idocpars.
SELECTION-SCREEN BEGIN OF BLOCK bl5 WITH FRAME TITLE text-038.
Radio Buttons :
parameters:
rb_idocp RADIOBUTTON GROUP RB3 DEFAULT 'X' USER-COMMAND UCOM MODIF ID MD6,
rb_custt RADIOBUTTON GROUP RB3 MODIF ID MD6.
SELECTION-SCREEN END OF BLOCK bl5.
SELECTION-SCREEN BEGIN OF BLOCK bl3 WITH FRAME TITLE text-032.
Radio Buttons :
parameters:
rb_apsrv RADIOBUTTON GROUP RB1 DEFAULT 'X' USER-COMMAND UCOM MODIF ID MD4,
rb_convt RADIOBUTTON GROUP RB1 MODIF ID MD4,
rb_idoc RADIOBUTTON GROUP RB1 MODIF ID MD4,
rb_proc RADIOBUTTON GROUP RB1 MODIF ID MD4.
SELECTION-SCREEN END OF BLOCK bl3.
SELECTION-SCREEN BEGIN OF BLOCK bl4 WITH FRAME TITLE text-037.
Radio Buttons :
parameters:
rb_appct RADIOBUTTON GROUP RB2 DEFAULT 'X' USER-COMMAND UCOM MODIF ID MD5,
rb_conct RADIOBUTTON GROUP RB2 MODIF ID MD5,
rb_cust RADIOBUTTON GROUP RB2 MODIF ID MD5.
SELECTION-SCREEN END OF BLOCK bl4.
INITIALIZATION
INITIALIZATION.
Check selection-screen entries *
*AT SELECTION-SCREEN.
PERFORM sub_get_physical_file USING p_fpath p_fname.
PERFORM sub_get_physical_file1 USING p_fpath1 p_fname1.
AT SELECTION SCREEN
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
PERFORM sub_get_file. " CHANGING p_fname. "#EC *
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname1.
PERFORM sub_get_file1. " CHANGING p_fname1. "#EC *
AT SELECTIHi,
I now have a requirement for the following:
Duplicate VARCOND if I Use small letters and capital letters. Sequential number also duplicated.
Here is the code and would appreciate if someone could shed some light on the issue.
*& Report ZVARTABDYNFINAL
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-08-25
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
REPORT ZVARTABDYNFINAL NO STANDARD PAGE HEADING
LINE-SIZE 150
LINE-COUNT 55
MESSAGE-ID /factglb/gta_custdev.
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP
*& Include /FACTGLB/GTDMI_VARTAB_TOP
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-08-25
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
TYPE POOLS
TYPE POOLS
TYPE POOLS
*Type declaration for ALV display
TYPE-POOLS : slis.
Include <icon>.
type-pools: col, "#EC *
icon, "#EC *
sym, "#EC *
abap. "#EC *
Target structure definitions
tables:
E1CUVTM, "#EC *
E1DATEM, "#EC *
E1CUV1M, "#EC *
edp21, "#EC *
edi_dc40, "#EC *
edi_dd40, "#EC *
edi_ds40. "#EC *
GLOBAL TYPES
TYPES : BEGIN OF ty_vartab.
include structure E1CUVTM.
TYPES: END OF ty_vartab.
TYPES : BEGIN OF ty_vartabdate.
INCLUDE STRUCTURE E1DATEM.
TYPES : END OF ty_vartabdate.
*Structure for data retreived
TYPES : BEGIN OF ty_vardetails.
INCLUDE STRUCTURE E1CUV1M.
TYPES : END OF ty_vardetails.
*Structure for data retreived from table tabinput.
TYPES : BEGIN OF ty_tabinput,
lines type string,
END OF ty_tabinput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_dsninput, "#EC *
LINE(101) type c,
END OF ty_dsninput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_newinput, "#EC *
LINE(101) type c,
flag(1) type c,
END OF ty_newinput.
*Structure for keeping the values of all the custom tables
TYPES : BEGIN OF ty_custom_tabs,
matnr TYPE matnr, "Material Number
werks TYPE werks_d, "Plant
lgort TYPE lgort_d, "Storage Location
qunty TYPE P DECIMALS 2, "Standard Order Quantity
det_loc TYPE CHAR6, "Detail Location
class TYPE CHAR2, "Class
rate TYPE P DECIMALS 2, "Rate
END OF ty_custom_tabs.
*Type declared for the internal table and work area which will store
*fields for error log
TYPES : BEGIN OF ty_error_log,
matnr TYPE matnr, "Material Number
mtart TYPE mtart, "Material Type
sel_data TYPE char10, "No of selectyed data
END OF ty_error_log.
*Structure for keeping the output data
TYPES : BEGIN OF ty_final,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
END OF ty_final.
TYPES: begin of TY_CONTENTHD,
VTNAM(018) type C,
FLAG(001) type C,
end of TY_CONTENTHD.
TYPES: begin of TY_CONTENT,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
Z_VARCOND type VARCOND.
TYPES: end of TY_CONTENT.
TYPES: begin of TY_CONTENTTAB,
VTNAM(018) type C,
COMP1(30) TYPE C,
CHAR1(030) type C,
COMP2(30) TYPE C,
CHAR2(030) type C,
COMP3(30) TYPE C,
CHAR3(030) type C,
COMP4(30) TYPE C,
CHAR4(030) type C,
COMP5(30) TYPE C,
CHAR5(030) type C,
COMP6(30) TYPE C,
CHAR6(030) type C,
COMP7(30) TYPE C,
CHAR7(030) type C,
COMP8(30) TYPE C,
CHAR8(030) type C,
COMP9(30) TYPE C,
CHAR9(030) type C,
COMP10(30) TYPE C,
CHAR10(030) type C,
COMP11(30) TYPE C,
CHAR11(030) type C,
COMP12(30) TYPE C,
CHAR12(030) type C,
COMP13(30) TYPE C,
CHAR13(030) type C,
COMP14(30) TYPE C,
CHAR14(030) type C,
COMP15(30) TYPE C,
CHAR15(030) type C,
FLAG(001) type C.
TYPES: end of TY_CONTENTTAB.
TYPES: BEGIN OF TY_E1CUVTM,
MSGFN TYPE MSGFN,
VAR_TAB TYPE APITABL,
STATUS TYPE RCUTBST,
VTGROUP TYPE RCUTBGR,
AUTHSTRUC TYPE RCUTBBE,
AUTHENTRY TYPE RCUFNBI,
FLDELETE TYPE FLLKENZ,
DBTABNAME TYPE TABNAME16,
DBCONACTIVE TYPE DBCON_ACTI,
PRESDEC TYPE VTDCT,
END OF TY_E1CUVTM.
TYPES: BEGIN OF TY_E1CUV1M,
MSGFN TYPE MSGFN,
VTLINENO TYPE VTLINENO,
VTCHARACT TYPE ATNAM,
ATWRT TYPE ATWRT,
ATFLV TYPE ATFLV,
ATAWE TYPE MSEHI,
ATFLB TYPE ATFLB,
ATAW1 TYPE MSEHI,
ATCOD TYPE ATCOD,
ATTLV TYPE ATTLV,
ATTLB TYPE ATTLB,
ATPRZ TYPE ATPRZ,
ATINC TYPE ATINC,
VTLINENO5 TYPE VTLINENO5,
END OF TY_E1CUV1M.
TYPES: BEGIN OF TY_E1DATEM,
MSGFN TYPE MSGFN,
KEY_DATE TYPE SYDATUM,
AENNR TYPE AENNR,
EFFECTIVITY TYPE CC_MTEFF,
END OF TY_E1DATEM.
TYPES: BEGIN OF ty_vtnam,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Name of variant table
dbtab_name type tabname16, "Custom table Name
error TYPE char1, " Indicates error in data format
reas TYPE char50, " Reason for failure
END OF ty_vtnam.
Get data type for characteristic
TYPES: BEGIN OF ty_cabn,
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
atfor TYPE atfor, "Data type of characteristic
atson TYPE atson, "Indicator: Additional Values
atprt TYPE atprt, "Check table
atprr TYPE atprr, "Name of Check Report Program
atprf TYPE atprf, "Function Module for Checking Values
anzdz TYPE anzdz, "Number of Decimal Places
check TYPE char1, "Indicates check required or not
END OF ty_cabn.
Get field names of variant table
TYPES: BEGIN OF ty_cuvtab_fld,
vtint TYPE vtint, " Internal number of variant table
atinn TYPE atinn, " Internal characteristic
vtpos TYPE vtpos, " Item number of characteristic in variant
*mod-012
DBFLD type NAME_FELD,
*mod-012
exist TYPE char1, " X Indictaes characteristic is part of fil
END OF ty_cuvtab_fld.
Store all data in internal table
TYPES: BEGIN OF ty_file,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
flag TYPE char1,
error TYPE char50,
END OF ty_file.
To check for duplicates
TYPES: BEGIN OF ty_dupl,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
slnid TYPE slnid,
END OF ty_dupl.
Get previously loaded characteristic values for internal table (CHAR)
TYPES: BEGIN OF ty_cuvtab_valc,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
valc TYPE atwrt, " Characteristic Value
END OF ty_cuvtab_valc.
Get previously loaded characteristic values for internal table (NUM)
TYPES: BEGIN OF ty_cuvtab_valn,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
val_from TYPE atflv, " Internal floating point from
END OF ty_cuvtab_valn.
Store column positions of characteristics
TYPES: BEGIN OF ty_col_pos,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Variant table name
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
field TYPE fieldname, "Field name
req TYPE char1, " Required or not
vtpos TYPE vtpos, " Item number of characteristics
END OF ty_col_pos.
Store valid values for characteristics
TYPES: BEGIN OF ty_cawn,
atinn TYPE atinn, " Internal characteristic
atzhl TYPE atzhl, " Int counter
atwrt TYPE atwrt, " Characteristic Value
atflv TYPE atflv, " Internal floating point from
lkenz TYPE lkenz, " Deletion indicator
END OF ty_cawn.
Store error messages for individual lines
TYPES: BEGIN OF ty_error,
vtnam TYPE vtnam, " Variant table name
fname TYPE fieldname, " Fieldname
atnam TYPE atnam, " Characteristic name
atwrt TYPE atwrt, " Characteristic value
row TYPE char5, " Row id
END OF ty_error.
Begin TPR# 4618
To store unique number for variant
TYPES: BEGIN OF ty_vnt_ma,
vtnam TYPE vtnam,
unique_no TYPE ZGTDM_UNQN,
no_chr TYPE ZGTDM_NO_CHR,
END OF ty_vnt_ma.
TYPES: BEGIN OF ty_dbtab,
vtint TYPE vtint,
vtnam TYPE vtnam,
DBTAB_NAME TYPE TABNAME16,
END OF ty_dbtab.
To find out concatenated number for
TYPES: BEGIN OF ty_split,
f1 TYPE char6,
END OF ty_split.
TYPES: BEGIN OF ty_charval,
char TYPE char30,
END OF ty_charval.
TYPES: BEGIN OF TY_DATA,
name TYPE string,
value(15) type c,
END OF TY_DATA.
DATA: I_DATATAB TYPE STANDARD TABLE OF TY_DATA. "#EC NEEDED
TYPES:
TUMLS_MESSTYPE type /SAPDMC/LS_MESSTYPE,
TUMLS_MESSTYPETXT type EDI_TEXT60,
TUMLS_MESSCODE type EDIPMESCOD.
TYPES:
TUMLS_TABNAME TYPE TABNAME, "#EC *
TUMLS_SEGMENT TYPE TABNAME. "#EC *
TYPES:
TUMLS_PATHFILE TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILENAME TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILETEXT TYPE /SAPDMC/LS_FILETEXT.
TYPES:
BEGIN OF type_errorline,
msgty type SYMSGTY,
id type SYMSGID,
msgno type symsgno,
par1 type symsgv,
par2 type symsgv,
par3 type symsgv,
par4 type symsgv,
END OF type_errorline.
TYPES:
type_errortab TYPE SORTED TABLE
OF type_errorline
WITH NON-UNIQUE KEY id msgno par1 par2 par3 par4.
DATA:
LV_LINE2 TYPE REF TO DATA.
GLOBAL INTERNAL TABLES
DATA : i_newinput TYPE STANDARD TABLE OF ty_newinput INITIAL SIZE 0."#EC *
DATA : i_contentheader1 TYPE STANDARD TABLE OF ty_contenthd INITIAL SIZE 0."#EC *
DATA : i_contenttab1 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab2 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab3 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab4 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab5 TYPE STANDARD TABLE OF ty_contenttab INITIAL SIZE 0."#EC *
DATA : i_E1CUV1M TYPE STANDARD TABLE OF E1CUV1M INITIAL SIZE 0."#EC *
DATA : i_errortab TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
GLOBAL WORK AREAS
**Internal Table for the structure TY_T001L
DATA : wa_vartab TYPE ty_vartab. "#EC *
DATA : wa_vartabdate TYPE ty_vartabdate. "#EC *
DATA : wa_vardetails TYPE ty_vardetails. "#EC *
DATA : wa_tabinput TYPE ty_tabinput. "#EC *
DATA : wa_dsninput TYPE ty_dsninput. "#EC *
DATA : wa_newinput TYPE ty_newinput. "#EC *
DATA : wa_gnewinput TYPE ty_newinput. "#EC *
DATA : wa_ginput_data TYPE ty_newinput. "#EC *
DATA : wa_final TYPE ty_final. "#EC *
DATA : wa_content TYPE ty_content. "#EC *
DATA : wa_contenthd TYPE ty_contenthd. "#EC *
DATA : wa_contentheader type ty_contenthd. "#EC *
DATA : wa_contenttab TYPE ty_content. "#EC *
DATA : wa_content1 TYPE ty_content. "#EC *
DATA : wa_contenthd1 TYPE ty_contenthd. "#EC *
DATA : wa_contentheader1 type ty_contenthd. "#EC *
DATA : wa_contenttab1 TYPE ty_content. "#EC *
DATA : wa_contenttab2 TYPE ty_content. "#EC *
DATA : wa_contenttab3 TYPE ty_content. "#EC *
DATA : wa_contenttab4 TYPE ty_content. "#EC *
DATA : wa_contenttab5 TYPE ty_contentTAB. "#EC *
DATA : wa_E1CUVTM TYPE E1CUVTM. "#EC *
DATA : wa_E1CUV1M TYPE E1CUV1M. "#EC *
DATA : wa_E1DATEM TYPE E1DATEM. "#EC *
DATA : wa_error_tab TYPE solisti1. "#EC *
INTERNAL TABLES AND WORK AREAS FOR BDC
*Internal Table to store the data to display the error message
DATA : i_errormsg TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
*Internal Table to store the data to display the error message
DATA : i_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
DATA : itab_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
**Work area to store the data to display the error message
DATA : wa_errormsg TYPE solisti1. "#EC *
**Internal table which will store data for the error log
DATA:i_error_log TYPE STANDARD TABLE OF ty_error_log INITIAL SIZE 0."#EC *
GLOBAL VARIABLES
DATA: G_FILE TYPE string. "#EC *
DATA : g_ctr_input_recs(5) type c. "#EC *
DATA: g_ctr_output_recs(5) type p. "#EC *
data : g_msg(100) type c. "#EC *
data: g_struct_file TYPE string. "#EC *
data: g_login type FILEINTERN. "#EC *
data: g_phyin type string. "#EC *
DATA: g_lprnt type RSPOPSHORT. "#EC *
DATA: g_FNAME1 TYPE STRING. "#EC *
DATA : g_repid TYPE repid, "#EC *
g_exit(1) TYPE C, "#EC *
gx_variant type disvariant. "#EC *
DATA : g_lines TYPE i . "#EC *
data : g_save(1) type c. "#EC *
DATA : g_splid TYPE rspoid . "#EC *
data: p_login type FILEINTERN. "#EC *
data: p_phyin type string. "#EC *
GLOBAL CONSTANTS
CONSTANTS c_msgar TYPE rslgarea VALUE 'F8'. "#EC *
CONSTANTS c_msgid TYPE rslgsubid VALUE 'E'. "#EC *
CONSTANTS c_urgnc TYPE char04 VALUE 'HIGH'. "#EC *
CONSTANTS C_X(1) TYPE C VALUE 'X'. "#EC *
CONSTANTS C_Y(1) TYPE C VALUE 'Y'. "#EC *
CONSTANTS C_Z(1) TYPE C VALUE 'Z'. "#EC *
CONSTANTS C_E(1) TYPE C VALUE 'E'. "#EC *
CONSTANTS C_SAP(3) TYPE C VALUE 'SAP'. "#EC *
CONSTANTS C_MOD(3) TYPE C VALUE 'MOD'. "#EC *
CONSTANTS C_MD1(3) TYPE C VALUE 'MD1'. "#EC *
CONSTANTS C_MD2(3) TYPE C VALUE 'MD2'. "#EC *
CONSTANTS C_MD3(3) TYPE C VALUE 'MD3'. "#EC *
CONSTANTS C_MD4(3) TYPE C VALUE 'MD4'. "#EC *
CONSTANTS C_MD5(3) TYPE C VALUE 'MD5'. "#EC *
constants: c_000001(6) type c value '000001', "#EC *
c_e1cuv1m(7) type c value 'E1CUV1M', "#EC *
c_02(2) type c value '02', "#EC *
c_009(3) type c value '009', "#EC *
c_0001(4) type c value '0001'. "#EC *
constants: c_e1datem(7) type c value 'E1DATEM'. "#EC *
constants: c_e1cuvtm(7) type c value 'E1CUVTM'. "#EC *
GLOBAL INTERNAL TABLES FOR ALV DISPLAY
*Internal tables for ALV Field cat
DATA :
i_fieldcat_ov TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_dtl TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_ov1 TYPE lvc_t_fcat, "#EC *
i_events TYPE slis_t_event. "#EC *
GLOBAL WORK AREAS FOR ALV DISPLAY
*Work area for ALV Field layout
DATA : wa_layout TYPE slis_layout_alv. "#EC *
*Work area for Field Cat. Table
DATA : wa_fieldcat TYPE slis_fieldcat_alv. "#EC *
GLOBAL VARIABLES FOR ALV DISPLAY
DATA : g_event TYPE slis_t_event. "#EC *
DATA : g_top_of_page TYPE slis_t_listheader. "#EC *
DATA : g_ok_code TYPE char4. "#EC *
DATA : g_variant type disvariant. "#EC *
GLOBAL CONSTANTS FOR ALV DISPLAY
BAL handling
data: iv_log_handle type BALLOGHNDL. "#EC *
data: is_log_header type bal_s_log. "#EC *
data: iv_object type bal_s_log-object value 'CAPI'. "#EC *
data: iv_subobject type bal_s_log-subobject value 'CAPI_LOG'."#EC *
data: iv_tcode type bal_s_log-altcode value 'SE38'. "#EC *
*MOD-005
RANGES:
R_MESTYP FOR EDIDC-MESTYP, "#EC *
R_CREDAT FOR EDIDC-CREDAT, "#EC *
R_CRETIM FOR EDIDC-CRETIM, "#EC *
R_SNDPRT FOR EDIDC-SNDPRT, "#EC *
R_SNDPRN FOR EDIDC-SNDPRN. "#EC *
DATA:
L_MESSTYPE TYPE TUMLS_MESSTYPE. "#EC *
*MOD-005
data: p_sndprn TYPE EDI_SNDPRN, "#EC *
p_sndprt TYPE EDI_SNDPRT, "#EC *
p_sndpor TYPE EDI_SNDPOR. "#EC *
data: p_rcvprn TYPE EDI_RCVPRN, "#EC *
p_rcvprt TYPE EDI_RCVPRT, "#EC *
p_rcvpor TYPE EDI_RCVPOR. "#EC *
data:
init_E1CUVTM type E1CUVTM, "#EC *
prev_E1CUVTM type E1CUVTM, "#EC *
init_E1DATEM type E1DATEM, "#EC *
prev_E1DATEM type E1DATEM, "#EC *
init_E1CUV1M type E1CUV1M, "#EC *
prev_E1CUV1M type E1CUV1M. "#EC *
Source structure definitions
data:
begin of LSMW_TAB_CONTENT, "#EC *
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
end of LSMW_TAB_CONTENT.
Counters
data:
g_cnt_VAR_TAB type i, "#EC *
g_cnt_TAB_CONTENT type i. "#EC *
Counter ct_xxxxxxxxxx: number of transferred records
data:
ct_edi_dc40 type i, "#EC *
cs_edi_dc40 type i, "#EC *
ct_E1CUVTM type i, "#EC *
cs_E1CUVTM type i, "#EC *
ct_E1DATEM type i, "#EC *
cs_E1DATEM type i, "#EC *
ct_E1CUV1M type i, "#EC *
cs_E1CUV1M type i. "#EC *
Global data definitions and data declarations
DATA: wa_cabn TYPE ty_cabn,
wa_cawn TYPE ty_cawn,
wa_file TYPE ty_file,
wa_vtnam TYPE ty_vtnam,
wa_cuvtab_fld TYPE ty_cuvtab_fld,
wa_cuvtab_valn TYPE ty_cuvtab_valn,
wa_cuvtab_valc TYPE ty_cuvtab_valc,
wa_col_pos TYPE ty_col_pos,
wa_error TYPE ty_error,
wa_dupl TYPE ty_dupl,
wa_dupl_file TYPE ty_dupl.
DATA: wa_vnt_ma TYPE ty_vnt_ma,
wa_split TYPE ty_split.
DATA: wa_charval TYPE ty_charval. "#EC *
Internal table
DATA: i_cabn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_temp TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_atinn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_file TYPE STANDARD TABLE OF ty_file, "#EC *
i_file_tmp TYPE STANDARD TABLE OF ty_file, "#EC *
i_vtnam TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab_fld TYPE STANDARD TABLE OF ty_cuvtab_fld, "#EC *
i_cuvtab_valn TYPE STANDARD TABLE OF ty_cuvtab_valn, "#EC *
i_cuvtab_valc TYPE STANDARD TABLE OF ty_cuvtab_valc, "#EC *
i_col_pos TYPE STANDARD TABLE OF ty_col_pos, "#EC *
i_cawn TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_n TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_c TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_i TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cuv_error TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_dupl TYPE STANDARD TABLE OF ty_dupl, "#EC *
i_dbtab TYPE STANDARD TABLE OF ty_dbtab. "#EC *
DATA: i_vnt_ma TYPE STANDARD TABLE OF ty_vnt_ma, "#EC *
i_split TYPE STANDARD TABLE OF ty_split. "#EC *
DATA: i_dupl_file TYPE STANDARD TABLE OF ty_dupl. "#EC *
DATA: i_charval TYPE STANDARD TABLE OF ty_charval. "#EC *
Constants
CONSTANTS: c_char TYPE atfor VALUE 'CHAR', "#EC *
c_date TYPE atfor VALUE 'DATE', "#EC *
c_time TYPE atfor VALUE 'TIME', "#EC *
c_varcond TYPE atnam VALUE 'Z_VARCOND'. "#EC *
Field Symbols
FIELD-SYMBOLS: <fs_vtnam> TYPE ty_vtnam, "#EC *
<fs_cabn> TYPE ty_cabn, "#EC *
<fs_cuvtab_fld> TYPE ty_cuvtab_fld, "#EC *
<fs_dupl> TYPE ty_dupl. "#EC *
FIELD-SYMBOLS: <FS_DYN_WA> TYPE ANY.
Variables
DATA: g_raw(500) TYPE c, "#EC *
g_invalid TYPE char1, "#EC *
g_error TYPE char1, "#EC *
g_message TYPE char50, "#EC *
g_slnid_c TYPE slnid, "#EC *
g_slnid_n TYPE slnid, "#EC *
g_row TYPE char5. "#EC *
DATA: g_varcond TYPE varcond, "Variant condition "#EC NEEDED
g_split_var TYPE i, "#EC *
g_split_var1 type i. "#EC *
Types: begin of ty_charname,
name type atnam,
end of ty_charname.
data: wa_charname type ty_charname, "#EC *
i_charname type standard table of ty_charname. "#EC *
data: cnt_i type i, "#EC *
g_tabix type char10. "#EC *
Types: begin of ty_itab_zedidc40.
include structure edi_dc40.
TYPES: end of ty_itab_zedidc40.
Types: begin of ty_itab_zedidd40.
include structure edi_dd40.
TYPES: end of ty_itab_zedidd40.
DATA: itab_zedidc40 type standard table of
ty_itab_zedidc40 initial size 0. "#EC *
DATA: itab_zedidd40 type standard table of
ty_itab_zedidd40 initial size 0. "#EC *
DATA: wa_itab_zedidc40 type ty_itab_zedidc40. "#EC NEEDED
DATA: wa_itab_zedidd40 type ty_itab_zedidd40.
*MOD-009
data: itab_ze1cuvtm type e1cuvtm, "#EC *
itab_ze1datem type e1datem, "#EC *
itab_ze1cuv1m type e1cuv1m. "#EC *
data: wdocnum(16) type n value 0. "#EC *
data: wsegnum(6) type n value 0. "#EC *
data: witemno(10) type n value 0. "#EC *
data: witemno_new(10) type n value 0. "#EC *
data: witemno_gst(10) type n value 0. "#EC *
data: witemno_qst(10) type n value 0. "#EC *
TYPES: BEGIN OF ty_input_data1, "#EC *
line(560) type c,
flag(1) type c,
END OF ty_input_data1.
DATA: i_input_data type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: i_input_data1 type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: wa_input_data type ty_input_data1. "#EC *
DATA: g_cnt_input_recs type i. "#EC *
DATA: g_flg_error type c. "#EC *
DATA: l_lines type i. "#EC *
DATA: l_lines1 type i. "#EC *
DATA: l_tabix type i. "#EC *
DATA: wa_input_data1 type ty_input_data1. "#EC *
DATA: FILE TYPE STRING.
Fields that are made available to the user:
DATA:
g_cnt_records_read TYPE i, "#EC *
g_cnt_records_transferred TYPE i, "#EC *
g_cnt_transactions_read TYPE i, "#EC *
g_cnt_transactions_transferred TYPE i, "#EC *
g_cnt_idocs_package TYPE i. "#EC *
data: v_log_handle type balloghndl. "#EC *
DATA: gt_curr_edi_dc40 TYPE STANDARD TABLE OF edi_dc40 initial size 0."#EC *
DATA: gt_curr_edi_dd40 TYPE STANDARD TABLE OF edi_dd40 initial size 0."#EC *
DATA: wa_curr_edi_dc40 TYPE edi_dc40. "#EC *
DATA: wa_curr_edi_dd40 TYPE edi_dd40. "#EC *
internal table for error messages during conversion
DATA: g_error_tab TYPE type_errortab, "#EC *
wa_errortab TYPE type_errorline. "#EC *
DATA: g_edidd_segnam type EDI4SEGNAM, "#EC *
g_edidd_hlevel type EDI4HLEVEC. "#EC *
DATA: g_segnum(6) TYPE n.
DATA: g_objecttype(2) type C.
DATA: P_FNAME(128) TYPE C VALUE '/usr/sap/trans/vartabheader'. " MODIF ID MD1 OBLIGATORY.
DATA: P_FNAME1(128) TYPE C VALUE '/usr/sap/trans/vartabcontent'. " MODIF ID MD1 OBLIGATORY.
field-symbols: <dyn_table> type standard table,
<dyn_table1> type standard table,
<dyn_wa>,
<dyn_wa1> TYPE ANY.
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
data: l_tabname TYPE tabname.
DATA: l_len_slnid TYPE i, "#EC NEEDED
l_len_varcond TYPE i, "#EC NEEDED
l_temp_slnid TYPE i, "#EC NEEDED
l_temp_slnc TYPE char5, "#EC NEEDED
l_temp_varcond TYPE varcond, "#EC NEEDED
l_sub_var TYPE i, "#EC NEEDED
l_val_split TYPE char10. "#EC NEEDED
DATA: l_invalid. "#EC NEEDED
*Include for Global Data Declaration
*INCLUDE ZGTDMI_VARTAB_TOPDYN.
*INCLUDE /FACTGLB/GTDMI_VARTAB_TOP02.
*Include for Selection Screen
*INCLUDE ZGTDMI_VARTAB_SELDYN.
*INCLUDE /FACTGLB/GTDMI_VARTAB_SEL02.
*Include for Sub Routines
*INCLUDE ZGTDMI_VARTAB_FORMSDYN.
*INCLUDE /FACTGLB/GTDMI_VARTAB_FORMS02.
*& Include /FACTGLB/GTDMI_VARTAB_SEL02 *
*& Include /FACTGLB/GTDMI_VARTAB_SEL
*& Include /FACTGLB/GTDMI_VARTAB_SEL
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-08-25
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
DECLARATION FOR SELECTION SCREEN
*selection-screen skip 1.
*For all the input field entries
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
*Parameter for Input File Name:
PARAMETERS: p_inpt TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File Variant table
PARAMETERS: p_inpt1 TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File variant Content
SELECTION-SCREEN END OF BLOCK bl1.
IDoc creation
selection-screen begin of block idocpars
with frame title text-006.
parameters:
p_trfcpt as checkbox default C_X MODIF ID MD3,
p_packge(5) type n default 1 MODIF ID MD3.
selection-screen end of block idocpars.
SELECTION-SCREEN BEGIN OF BLOCK bl3 WITH FRAME TITLE text-032.
Radio Buttons :
parameters:
rb_apsrv RADIOBUTTON GROUP RB1 DEFAULT 'X' USER-COMMAND UCOM,
rb_convt RADIOBUTTON GROUP RB1,
rb_idoc RADIOBUTTON GROUP RB1.
rb_proc RADIOBUTTON GROUP RB1.
SELECTION-SCREEN END OF BLOCK bl3.
INITIALIZATION
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INPT.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = C_X
CHANGING
FILE_NAME = P_INPT
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE e241.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INPT1.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = C_X
CHANGING
FILE_NAME = P_INPT1
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
-
I am going under Tools and Options, then Advanced -> Network -> Settings and changing the automatic configuration script for my work network. When I hit OK everything works. But when I close out Firefox, and then reopen it at a later time, it does not save the setting change I made and I have to do it all over again. This is also happening when I change my home page information as well...
See http://kb.mozillazine.org/Preferences_not_saved
-
How do I get my home page back and uninstall "home.mywebsearch"?
When I open up Mozilla Firefox the home page has been changed from "comcast.net" to "http://home.mywebsearch.com/index... Is this from Firefox? What happened to my homepage? What is this page, and how do I go back to the home page comcast.net? Who is "Mindspark" since it says it's the owner of the site when I click for more details. It says if you want to uninstall this just go to the "start" menu, "control panel" and "add/remove program" and select "MyWebSearch Bar" but this is not listed to add or remove. Can you tell me what happened and how to get my home page back? Thank you.
== This happened ==
Every time Firefox opened
== TodayYes, Jason, and I would like to assure you that for not being spyware, malware, etc., this thing sure acts like it. It phones home constantly and manages to still remain on my computer...even after deleting the app from my programs. I've had to resort to a very aggressive spyware removal application to get rid of your company's crap toolbar and the verdict is still out on whether it did the job. I rate applications on not just their usefulness but on the size of their footprint and how easy they are to remove if I don't want them. On a scale from 1-10, (10 being the best) MyWebSearch gets a negative 2.
-
Home page folders (and icons inside) missing and contents of folders inaccessible
Hello Everyone!
8820 Version 4.5 (AT&T Service)
My home page consisted of 5 folders where I organized all my programs, plus the applications item at the bottom.
Out of the blue a few days ago, the folders disappeared (along with all the icons for programs that were in the folders) and all that is left is a faint outline of the rectangular shaped backgrounds on the left side of the screen that are stacked on top of each other. And the application item at the bottom also does not have any icons in it to access the programs.
So, now for instance, I cannot find and open my contacts program. But, I know the information is still there because I can use the voice dialing feature to call numbers I don't know.
The only icons I can access to get to programs is through the "toggle" feature (alt and esc). Here I have the PTT, messages, bbmesenger,home, phone, and browser icons which I can access.
I purchased the phone the end of last year and just updated to v 4.5 a few weeks ago.
What suggestions would anyone have of the best process to fix this problem?
Thanks in advance.
efree
Solved!
Go to Solution.I don't have it in fromt of me at the moment, but in going through the Application Loader there should be an Options or Advanced button you can hit. From within that screen you can select the option to wipe all applications or something like that. Doing do will erase everything off the device, and reinstall the OS. Let me know if you see that option.
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution. -
User profile and home page changed and Firefox hijacked by IE
I use Firefox with XP os with Kaspersky os. When I turned on computer it went through changing user profile.
Home page is changed to MSN-IE becomes the browser and all my files are gone. Computer hijacked. This is the second computer this has happened to.See these articles for some suggestions:
*https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
*https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
*http://kb.mozillazine.org/Preferences_not_saved -
Making my defined home page stick and stay at every launch of firefox
I followed the help topic for defining my home page and everytime I quit and relaunch firefox, my defined home page has not been saved and I get this page instead : http://www.searchqu.com/.
This link should help - https://support.mozilla.com/kb/Preferences+are+not+saved
-
I run 3.6.13 I tried to install beta 4. 11, it downloads and installs, it opens the home page, but that's it, the throb er works but Firefox does not respond, i mean like in nothing, it is dead, you click anywhere on the toolbar, and it is like a dead dog.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]] -
- Firefox 4.0 is used as preferred browser
- One can change the user home pages. The new homepages are found & work ok after closing and reopening Firefox.
- However, after rebooting the laptop (HP Elitebook), old Firefox home pages reappear, they replace the new ones.
- If I remember correctly this bug appeared already prior Firefox 4.0, this malfunction/ bug was noted in some last winter version before the v 4.0.
- Help/ Bug fix is appreciated!- Firefox 4.0 is used as preferred browser
- One can change the user home pages. The new homepages are found & work ok after closing and reopening Firefox.
- However, after rebooting the laptop (HP Elitebook), old Firefox home pages reappear, they replace the new ones.
- If I remember correctly this bug appeared already prior Firefox 4.0, this malfunction/ bug was noted in some last winter version before the v 4.0.
- Help/ Bug fix is appreciated! -
I can not print from my emails, since my email page changed fire fox is blocking them Please call and fix this I have not been able to print since last week i have business paper work I need to finish I can not spend any more time on this I have also been on the phone yahoo
<sub>edit: removed personal information for your protection. please note that we cannot offer support via telephone, so please continue in the forum. thanks for your understanding! (philipp)</sub>Hi Vicki, you also mentioned your home page changing. If Yahoo is your home page, this is normal as they keep updating things.
In some cases, if your home page is a specific server address instead of a more general address like
* http://www.yahoo.com/
* http://my.yahoo.com/
* http://mail.yahoo.com/
then Yahoo will need to redirect your browser to a different server.
Users have reported on this forum that this can lead to email problems like broken features as well as display glitches.
To make sure you get the server that Yahoo intends for you, please go to one of the above Yahoo addresses and follow the link to your email. Hopefully this will resolve any problem with the redirection and you can save the new address in place of the old one (home page, bookmark, etc.).
Also, when you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site. If Yahoo support did not already recommend this, here are the steps:
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help? -
Incorrect Sort Order - On Home Page - News and Announcements
On the Company sub-pages "News and Announcements" the sort order is correct. The most recently added News or Announcements is at the top of the list sorted by Publish Date.
However on the Home Page they are not.
Any ideas?
Thanks,
BG...Hi,
There is Enhancement Request on this problem created on Metalink (Bug 5571606) for about a year. It is marked as "Very desirable feature" but no info about when this desireable feature will be available. I asked Portal consultant at Oracle Services and was told, it depends on how many and how big customers would request this feature on behalf of their valid Support Contract.
So the only way I think is to create Service Requests on Metalink asking for patch.
I did in September 2006, what about you dear colleagues?
Regards Jiri Rohlicek -
Firefox opens with home page tab and blank tab.
When I start Firefox (2) tabs open, my home page tab first and a blank tab second.
Does this occur other times that you navigate to your home page, such as:
* Opening a new window (Ctrl+n)
* Clicking the Home button or pressing Alt+Home on the keyboard
''If so,'' there might be an extra vertical bar character toward the end of your home page setting. You can check that in the Options dialog:
orange Firefox button (or Tools menu) > Options > General
More info on that:
* [[Startup, home page and download settings]]
* [[How to set the home page]]
''If not,'' it's possible that there's something odd in the shortcut you use to start Firefox. You can check here:
right-click the icon > Properties > Shortcut tab
The target field should have this, no more, no less:
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -
When I try to download an article on Yhaoo home page the download freezes the computer and I have to use the " control alt delete " keys to turn off the download and get the computer running again.
How do I turn off the annoying and frustrating Mozilla Support page when booting up my computer? There ARE NO INSTRUCTIONS ON THE PAGE TELLING HOW TO DO THIS WWHHYYY NNOOTT !!!Update Your Firefox to latest version of Firefox 17.0.1
'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
my 32 gb iPad recently received the IOS 8 software. The iPad is responding more slowly, it takes an unacceptable amount of time to find a site or enter a search on other sites. My home screen background changed, the home screen enlarges and then shrinks, any suggestions?
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
But no, you will not be able to downgrade iOS. -
My bookmarks icon, which was located next to the homepage icon is missing. Please tell me how to restore the icon so I can have access to the bookmarks
Hi,
Please try this: '''View '''('''Alt '''+ '''V''') > '''Toolbars''' > '''Customize''' or right-click the '''+''' after the last tab, look for the '''Bookmarks''' icon (there may be two), click, hold, drag and drop it on an empty space in the toolbar. When the '''Customize...''' window is open you can also check if the icon is hidden below other icons by moving the other toolbar items.
[https://support.mozilla.org/en-US/kb/how-do-i-customize-toolbars Customize Toolbars]
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]
Maybe you are looking for
-
PC will not connect to wireless network
I have desktop P6620p with Windows 7. Until yesterday I was using mobile hotspot to connect to Internet via wireless connection. Yesterday evening I started having problems, I couldn't connect, the computer could not even find the wireless network th
-
A thin magenta line suddenly appeared, top-to-bottom (excluding the top white menu), in the middle of my display. Resolutions, display profiles make no difference. My desktop is black; I can see blue pixels interspersed with magenta pixels, and a som
-
I am unable to update my payment information in my profile without credit card information. I do not see "None" option below Visa, Master, Amex & Discover.
-
Documenting EUL and Workbook information
Recently, my current client asked me if there was any easy way to document all the EUL information in one file. I generated the below pdf document Check this http://www.appsbi.com/discoverer_eul_snapshot_report.pdf Sample Discoverer EUL and Workbook
-
How to make the scrollbar function with mouse scroll wheel?
Is there a way how to make my content scroll even with the mouse scroll wheel?... I have to edit the coding??