Home phone using up all my monthly data
I recently purchased the home phone service and it's using all of my data. Help me
Lets get it figured out, Ceekay1220! Which model device is it? Do you disconnect the device when done using? Do you have a secured password setup? Share details so that we can help!
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport
Similar Messages
-
I have bought movies from itunes and now they are on my computer why is it that each time I try to watch the movie it re downloads and uses up all my internet data? How do I prevent this and make it so it just plays from my stored version on my computer hard drive? Please help.
Welcome to the Apple Community.
Watch it from Computers > movies and not movies > purchased. -
I have unlimited data, so why do I receive the text stating I've used 50% of my monthly data allowance and that my data may be restricted for the remainder of my bill cycle? I've been with Verizon 15+ years and don't think its necessary to be screwed out of my unlimited plan... I heard something last year regarding Verizon limiting the unlimited plan if someone reached a certain point of usage... I'd like to have some clarity on this issue...
FuzzyBug wrote:
I have unlimited data, so why do I receive the text stating I've used 50% of my monthly data allowance and that my data may be restricted for the remainder of my bill cycle? I've been with Verizon 15+ years and don't think its necessary to be screwed out of my unlimited plan... I heard something last year regarding Verizon limiting the unlimited plan if someone reached a certain point of usage... I'd like to have some clarity on this issue...
call *611 or go to a verizon corporate store and fix it. Hopefully it will be an easy fix. -
Got error code 50 in middle of phone syncing lost all back up data? How do I restore?
while upgrading my wife's Verizon iphone to iOS5, on my macBook pro, at the very end of the restoring from back up, I got error code 50, then was asked to look for backup to restore to, only option was to back up from my phone. All of her data is gone. How do I restore that now?
Restore the device again using the most recent backup.
If there is no more recent backup and the pictures were not copied off the device prior to the original restore, they are gone. Same goes for videos taken with the device.
Contacts are designed to be synced to a supported application on the computer or a cloud service, simply sync them back.
Any content acquired from iTunes should be on iTunes on the computer, simply sync it back. -
Will upgrading my phone remove my 4GB per month data plan?
Hello,
I'm currently on a month to month contract in a family plan which has 4GB for $30 per month. I was told by a Verizon rep in store that upgrading the phone and extending the contract by two years would force me to choose a new data plan... but when I review the purchase online, it doesn't seem to indicate that I will be losing this.
Will I lose my 4GB per month data if I upgrade my phone and get the two year contract?
Would upgrading another device on the family plan to the phone that I want, and then switching the new device over to the line that has the 4GB per month plan allow me to keep that data plan?
Sorry if this has been talked about already. I've seen a lot of discussion about the unlimited data plan, but haven't seen anything about the 4GB per month plan.
Thanks!It sounds like you have a promo deal, double the data - there is no 4GB plan right now, there is 2 GB for $30. If you do the upgrade in the (corporate, not an authorized reseller) store, and the rep is a good one, you MAY (emphasis on MAY) be able to keep the 4GB for $30. If it's an authorized reseller, you'll lose it since they can only choose from surrently available plans and options.
If you are seeing no change online, and you can keep your current plan, it sounds good. I'd check my bill carefully though, as it was a promo deal and I don't know if the terms transfer to a new contract. -
Calendar on iPad.
Month view, tap MARCH 2013, calendar closes to home screen.Try removing any all-day events from the calendar for the 1st April 2013 e.g. if you are syncing the calendar from somewhere else (e.g. Outlook on a PC or iCal/Calendar on a Mac) then change it to a timed event instead of all-day - it seems that there is a problem with all day events on that date which is when the clocks change due to daylight saving.
-
I have 10GB of Other Data. How can I restore my phone without losing all of my data?
I have 10GB of Other Data on my phone. If I restore from backup, all of the Other data is still there. Do I understand correctly, that I can restore to factory settings and then load all of my apps, music, etc back onto my phone from my computer? If so, how do I do that? What data will I lose by doing this?
Thank you!If restoring from a backup still shows the "Other" data, it's likely contained as a part of the backup. You can restore the device and resync that data (apps, music, etc) back to the device. The things to pay attention to would be things like contacts, calendars, and notes -> would want to make sure those were synced with an account of some sort, or saved elsewhere to transfer back to the device. Also, items like messages can't be synchronized back over to the device, unless it's from a backup.
-
My iMac has changed all my dates to 5 Jan 13 in iPhoto, finder and in Yahoo messenger archives. Any ideas? All other operating systems seem to be normal.
Have you verified that the iPhoto applications is not in the Applications folder or somewhere else on the hard drive?
To do so download and use Find Any File to search for "iPhoto.app" because FAF can search areas that Spotlight can't. If the application is somewhere else on the HD FAF will find it. However, I doubt that it will be there but it's worth a search.
OT -
No home phone service for more than two months
I am sending this note on behalf of my mother. She has been waiting for technical services to her home phone for more than two months. She has received dates where a technician would come out to repair her services in which she has left work early or stayed home on weekends no avail. My mom is not in best health and has a child with disabilities living in the home and it is imperative that her services are working. It is frustrating to her to pay for a service she's not receiving. This is the worst customer service experience from Verizon.
I am asking for immediate resolve to this issue and to work with us to assure payment for time where phone has not worked Will not be charged to her account. Please contact me {edited for privacy}.Hi lmatthews522,
Please go to your profile page for the forum by clicking on your name, and look at the top of the middle column where you will find an area titled "My Private Support Cases". There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal. -
I seem to have used up all my wi-fi broadband extremely quickly (I have huge broadband limit) using my iphone, and not sure if I have something incorrectly set up in the settings of my iphone that has allowed this to happen? Any ideas? Haven't been watching any movies or downloading anything major.
Hickeysm,
Do you mean your the download limit set by your Internet Service Provider for all broadband use? Or the data allowance from your phone network provider for your iPhone?
If you mean the phone contract's data allowance, I have a similar problem. I had a message from O2 yesterday to say I've used 80% of my monthly data allowance, which is very unusual for me. I may have found the cause which is that my iPhone is reluctant to connect to Wifi, and when it does, no data moves; so it's been accessing data with 3G. Nothing wrong with my wifi (iPad and iMac connect without problems).
I'm suspecting the iOS 5.1 update. Has anyone else had similar problems since taking it? -
Are there any known good home phone systems for the Home Phone Connect
I've had the Home Phone Connect now for several months. I have had a Panasonic KX-TG7641 for a good while now. I bought this system to connect a cell phone through the Bluetooth to make a receive calls at home. This cell phone stayed docked in the charger next to the Panasonic base station. There were a few extra steps involved in order to make calls using the Bluetooth and every time my mother-in-law visits it is an extensive training process to show her how to use the phone. Every. Time. She. Makes. A. Call.
I saw the HPC and figured I could simplify the system and since the cell we kept connected was off contract, I got the HPC for free and signed up for 2 years with it. This was a mistake. While I can always hear the callers on the line, they sometimes report that I am too garbled to understand. Today I knew I was going to be on the phone on hold for a while, so I used my home phone handset for comfort (vice holding my Galaxy up to my head for an extended period of time)
After a 30 minute on-hold with the Veterans Administration I finally got through to an operator who informed me she could barely hear me/broken and garbled. Where I have my HPC at it is right in a window and I have steady 2 bars on it always. I told her I could call back on my cell phone, but she insisted we power through it so I wouldn't have to wait again on hold. Well we eventually made it through the call.
After hanging up I used my Google powers to see what the issue it/how to fix it. It appears that the people that have issues when using the HPC also have Panasonic phones/base stations connected to it. This might be because Panasonic phones are widely available and are the most common ones in use, but it might also be in that something is incompatible between the 2 systems. Odd, since the way it connects is similar to an old POTS. Could it have something to do with the DECT 6.0 that hey use (on the 1.9GHz band) where other older devices use standard 2.4 or 5.8?Thank you for the tip. Sorry if it's the wrong forum. I don't post here often. I searched for the Home Phone Connect under devices and found it under "Other" so figured this was the best place to post it. Could you point me to the correct place for the HPC discussions?
I'll double check later when I'm home on my computer to see iff the problems being reported are all using the DECT 6.0 (1.9GHz). Might be causing some interference of some sort. -
Is it possible that my Extreme and Expresses are draining monthly data allowance?
I hope someone can answer this, as I'm having a real issue with brand new installations of satellite internet. We have a 10GB/mo allowance on the accounts, and on one of the accounts that feeds a main house, I have 1 new Extreme and 3 new Expresses to try and grab the signal in bedrooms. The house is and has been empty since installation of the very first month, yet according to the provider, we have used almost all of the data allowance for the month.
There is no computer equipment in the house that could be "updating" automatically or iClouding or anything like that. It is a closed large house, that no one goes in but me periodically to check on until it will be occupied in Oct. The satellite company is trying to look at what is happening but they are not well versed in Apple routers and wanted me to ask if its possible that the Extreme and Expresses are doing something in updating or communicating with each other that would drain the usage by "talking" or "downloading" or accesing the internet.
Thanks!I'm certain. This is a large farm estate and I installed 4 separate accounts in 4 separate locations. The one that gets 24/7 usage in the office with 1 PC, an airbook and iPhone (and I never shut down the PC at night so its always online) used 7GB in a month. This uses a Time Capsule but stands alone and doesn't communicate with any other router. Another system is at the pool house area and also uses and Extreme but doesn't link to anything else (no Express) This has also been an empty building as no people are in residence until Oct. It used only .2GB in a month (bear in mind I speed tested and looked at YouTube to check the speed).
This is why it was stunning that the main house with basically the same set up as the Pool House and no people used 8.5GB. The only thing different is that it is communicating with 3 Expresses in that building.
I'm fast realizing 10GB a month is meager compared to what most people are used to, but this is all that is available. We have been used to having only landline DSL at a rate of 756k-1MB and no cell service, so people will be thrilled if we have enough speed to see a YouTube video. Because of our situation no one has ever used the web for gaming or Netflix or anything like that - it was impossible. People just want to be able to do what I do in the office - email, check the web for news. My boss does like Skype, but he doesn't hang on it. His Skype calls last about 1 minute (LOL!) and he may do that once a day to our Europe office when he is in residence, but the majority of the time the place is empty, so I'm hoping this will suffice.
Thanks! You have basically answered what we needed to know - the Extreme and Express aren't doing anything extraordinary that would cause a massive drain of GB. Have a wonderful weekend! -
Re: retrieve monthly data
Hi,
I have 5 years of monthly data. how can I retrieve all the monthly data where the month is less than current month?
Thanks.
Gianselect *
from your_table
where date_column < add_months(sysdate, -1)
This will give you all the data from a month ago today, so this will give you all of the data after Jan 19 2007. -
hi gurus,
plz check my report using for all entries where i am give data in selection screen from date to date as 3.01.2007 to 4.02.2007
my code does not provide me data between above date to date.
it fetch data from other date like 26.06.2006 to some other
plz check code and give me solution for it.
TABLES: bseg, bkpf.
*ALV grid_data
TYPE-POOLS: slis.
INTERNAL TABLES
TYPES: BEGIN OF it_output,
bukrs TYPE bseg-bukrs, "Company Code
belnr TYPE bseg-belnr, "Accounting Document Number
gjahr TYPE bseg-gjahr, "Fiscal Year
buzei TYPE bseg-buzei, "Number of Line Item
augdt TYPE bseg-augdt, "Clearing Date
shkzg TYPE bseg-shkzg, "Debit/Credit Indicator
dmbtr TYPE bseg-dmbtr, "Amount in local currency
kostl TYPE bseg-kostl, "Cost Center
hkont TYPE bseg-hkont, "G/L Account
matnr TYPE bseg-matnr, "Material Number
werks TYPE bseg-werks, "Plant
erfmg TYPE bseg-erfmg, "Quantity in unit of entry
blart TYPE bkpf-blart, "Document type
bldat TYPE bkpf-bldat, "Document Date
budat TYPE bkpf-budat, "Posting Date
monat TYPE bkpf-monat, "Fiscal period
cpudt TYPE bkpf-cpudt, "Document Entry Date
usnam TYPE bkpf-usnam, "User name
tcode TYPE bkpf-tcode, "Transaction Code20
bktxt TYPE bkpf-bktxt, "Document Header Text
waers TYPE bkpf-waers, "Currency Key
awtyp TYPE bkpf-awtyp, "Reference procedure
awkey TYPE bkpf-awkey, "Object key
END OF it_output.
TYPES: BEGIN OF it_bkpf,
bukrs TYPE bkpf-bukrs,
belnr TYPE bkpf-belnr,
gjahr TYPE bkpf-gjahr,
blart TYPE bkpf-blart,
bldat TYPE bkpf-bldat,
budat TYPE bkpf-budat,
monat TYPE bkpf-monat,
cpudt TYPE bkpf-cpudt,
usnam TYPE bkpf-usnam,
tcode TYPE bkpf-tcode,
bktxt TYPE bkpf-bktxt,
waers TYPE bkpf-waers,
awtyp TYPE bkpf-awtyp,
awkey TYPE bkpf-awkey,
END OF it_bkpf.
DATA: lt_output TYPE it_output OCCURS 0 WITH HEADER LINE.
DATA: lt_bkpf TYPE it_bkpf OCCURS 0 WITH HEADER LINE.
ALV DECLARATION DATA *
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
it_heading TYPE slis_t_listheader,
it_sort TYPE slis_t_sortinfo_alv,
it_events TYPE slis_t_event,
it_alv_event TYPE slis_alv_event,
gv_repname TYPE syrepid,
gv_save TYPE char1,
is_layout TYPE slis_layout_alv.
SELECTION SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK bl WITH FRAME TITLE text-011.
SELECT-OPTIONS: s_bukrs FOR bseg-bukrs NO INTERVALS,
s_blart FOR bkpf-blart,
s_budat FOR bkpf-budat.
SELECTION-SCREEN END OF BLOCK bl.
START OF SELECTION *
START-OF-SELECTION.
PERFORM get_data.
End of Selection *
END-OF-SELECTION.
PERFORM build_field_catalog.
PERFORM eventstab.
PERFORM display_data.
FORMS *
*& Form get_data
Get Data
FORM get_data .
SELECT bukrs
belnr
gjahr
buzei
augdt
shkzg
dmbtr
kostl
hkont
matnr
werks
erfmg
INTO TABLE lt_output
FROM bseg
WHERE bukrs IN s_bukrs.
IF sy-subrc = 0.
SORT lt_output BY belnr.
DELETE ADJACENT DUPLICATES FROM lt_output COMPARING ALL FIELDS.
ENDIF.
IF NOT lt_output[] IS INITIAL.
SELECT bukrs
belnr
gjahr
blart
bldat
budat
monat
cpudt
usnam
tcode
bktxt
waers
awtyp
awkey
INTO TABLE lt_bkpf FROM bkpf
FOR ALL ENTRIES IN lt_output
WHERE bukrs = lt_output-bukrs AND
belnr = lt_output-belnr AND
gjahr = lt_output-gjahr."AND
blart IN s_blart AND
budat IN s_budat ." AND
blart = 'SA' OR
blart = 'SB' OR
blart = 'AB' OR
blart = 'ZC'.
*sort lt_bkpf by blart budat.
DELETE lt_bkpf WHERE blart NOT IN s_blart AND
budat NOT IN s_budat.
ENDIF.
SORT lt_bkpf BY bukrs belnr.
SORT lt_output[].
DELETE ADJACENT DUPLICATES FROM lt_output COMPARING ALL FIELDS.
LOOP AT lt_output.
READ TABLE lt_bkpf WITH KEY bukrs = lt_output-bukrs
belnr = lt_output-belnr
budat = lt_output-budat
BINARY SEARCH.
IF sy-subrc = 0.
MOVE: lt_bkpf-gjahr TO lt_output-gjahr,
lt_bkpf-belnr TO lt_output-belnr,
lt_bkpf-blart TO lt_output-blart,
lt_bkpf-bldat TO lt_output-bldat,
lt_bkpf-budat TO lt_output-budat,
lt_bkpf-monat TO lt_output-monat,
lt_bkpf-cpudt TO lt_output-cpudt,
lt_bkpf-usnam TO lt_output-usnam,
lt_bkpf-tcode TO lt_output-tcode,
lt_bkpf-bktxt TO lt_output-bktxt,
lt_bkpf-waers TO lt_output-waers,
lt_bkpf-awtyp TO lt_output-awtyp,
lt_bkpf-awkey TO lt_output-awkey.
MODIFY lt_output.
ELSE.
DELETE lt_output.
ENDIF.
ENDLOOP.
ENDFORM. "get_data
thanks jayantHi Jayant,
You cannot retrieve data first from BSEG and then from BKPF.
It is not correct and you cannot get the correct data.
You should use BKPF which is header table first and then
using for all entries retrieve data from BSEG.
Use date field in the select statement condition for BKPF table retrieval and
you don't have posting date field in BSEG.
If you do like this, it will definitely work.
Retrieve data from BKPF using date condition in SELECT statement.
Then, using for all entries retrieve from BSEG.
Reward if helpful. -
Hi Friends,
Good day,
I want to get the previous month balance.
Here is the my business scenario. I am going to enter the month and year then i can get the values corresponding to this month and year, but in this i want previous month data for one object or one measure.In that query i set the two filter
Enter Month Name:
Enter the Year:
Say for ex, if i enter August means i need all august month data plus i need previous month balance for balance object.if i suppose enter January and year is 2008 means. I need December month data for year 2007 for the balance object and for remaining i need January month Year 2008 data.
Any Suggestions,
Thanks lot,
Regards,
-B-Hi Balaji,
You are a lucky guy, that's why getting these much reply. Congratulations friends for your good replys. I also find a solution with access database and if and mod operation.
temp.Yr ; = @prompt('Enter Year:','A','Time period\Year',Mono,Free,Persistent,,User:0)
AND
temp.Mth ; = @prompt('Enter Month:','N','Time period\Month',Mono,Free,Persistent,,User:0)
OR
temp.Yr ; = @prompt('Enter Year:','A','Time period\Year',Mono,Free,Persistent,,User:0) - (IIF(@prompt('Enter Month:','N','Time period\Month',Mono,Free,Persistent,,User:0)=1,1,0))
AND
temp.Mth ; =( (@prompt('Enter Month:','N','Time period\Month',Mono,Free,Persistent,,User:1)+10)mod 12)+1
The filter contain...
............year equal to @year
........and
............month equal to @month
or
............year equal to @year
........and
............month equal to @month
Regards
Eldose
Maybe you are looking for
-
private void btn_Click(object sender, EventArgs e) if(textBox1.Text == "") errorprovider1.SetError(textBox1, "fill the field");//count the error if(textBox2.Text == "") errorprovider1.SetError(textBox2, "fill the fiel
-
I am using Nightly-Elm 21.0a1 Recently Ctrl + Shift + T stopped working. History --> Recently Closed Tabs still works. Other hotkeys also still work. I already tried Safe Mode, didn't work. In a new profile it does work. This guy (https://support.moz
-
Anonymous FTP User created by the system lacks the user name
I'm experiencing some problems and inconsistencies in the Mac OS X Server 10.4.7 FTP service. First I'll report this behaviour to evaluate if it's worth a bug report. I read in the that the user with user name 'Anonymous FTP User" and short name 'ftp
-
Help! Project Damaged, All Tracks Disappeared!
My project, which was fine the last time I opened it, now gives me the following messages when I try to open it: "Minor correction of project has taken place (1)" then "Warning! Project may be damaged" When the files opens all the tracks are gone! If
-
Converting Queires created in BI 7.0 to BIW 3.x
Hi, I have a problem wherein i have created the Queries in BI 7.0 and now, after some decisions it is being decided that the Queries has to be created in 3.x version instead of BI 7.0. Since there would be wastage of lots of efforts, i would like to