Home screen wallpaper after the update? HELP
I can't set my wallpaper to my homescreen, is this something we can't do as owners of the 3g?
you don't get this feature with the 3G, only the 3GS and later...
Similar Messages
-
Iphone4 froze after the update - HELP
On updating my iphone4 to the current i0s my iphone froze on the itunes logo and the usb caple shows up on the screen.I also tried DFU mode but that didnt help. i also waited for like 7 hours yet nothing happened! i also removed itunes and downloaded it again and installed it yet no luc. itunes wont even recognize my device so please help me i dont want my iphone to die
you don't get this feature with the 3G, only the 3GS and later...
-
N82 Lcd Screen Problem After the Update (20.0.062)
Hi Everyone...
After i have updated the firmware of my phone to 20.0.062,
the LCD of it show red scratches... hmmm... very annoying when i view pictures and videos on my phone... How can i fix it? Please help me...take it to a nokia repair center, remember to backup your phone before you take it.
Blackberry Bold -
1 am pdt update time
See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.
-
When setting photo as lock screen/home screen wallpaper, quality is reduced
When setting a photo as the wallpaper for my lock screen/home screen the photo quality is dramatically reduced. This appears to be an issue since updating to iOS 8, as I have not changed my home screen wallpaper yet since updating, and when setting the same photo as my lock screen now, there is a noticeable difference. This only seems to be a problem when using landscape photo. Anyone else had this problem?
Hi Mara,
This is apparently a bug in iOS 7. Take a look at the posts to the right under "More Like This". Several users have come up with creative workarounds for this. Hopefully it will be fixed soon in an upcoming release!
Cheers,
GB -
I was updating my ipod touch to iso 6.1 (i think) and when my ipod restarted after the update it froze on the loading bar so i held the lock and home buttons down to restart my ipod it showed the apple logo for a few seconds then the screen went random colours. I tried to let the battery drain then plug it into the computer but it doesen't recognize it when i connect it.
Please help!!!Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I updated my iPhone 3G today and after the update it said on iTunes that my sim was not compatible and my iPhone screen went on to slide for emergency/connect to itunes. Ive tried restoring it but it hasnt worked. Please help!
Unless the iPhone was purchased as unlocked very recently directly from an Apple Store (the only place in the US where unlocked iPhones are sold, and then only since June), which from the symptoms I doubt is the case, then it was locked to AT&T and jailbroken to make it work with an Irish cell carrier. Updating the operating system has now relocked the iPhone back to AT&T.
Only the cell carrier can institute an official unlock, one which will hold across updates of the operating system, and AT&T will not do so for any reason. All we can advise here is that you return the iPhone to your uncle and purchase an iPhone there in Ireland.
Regards. -
Hi My grandparents just bought an iPod Touch for me from Dubai, UAE. I can't see any facetime on the home screen nor in the settings. I've read that it's not possible. But is it possible if I get my OS updated again from India?
There is no way you can activate Facetime on an iPod touch purchased in the UAE. The government there required Apple to lock off Facetime at the hardware level and there's no way to unlock it. Reinstalling iOS, regardless of country, will not help. If you want Facetime, you will need to sell your UAE-version iPod and buy one there in India.
Regards. -
Hi,
My ipad air getting close all apps automatically within seconds while connecting wifi. This issue is started after the updation of the iSO 8, Please help me to rectify this issue.
Expecting some quick solution in this regard,
Thanks
Prabhu(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset -
Hello!
I have a MacBook Air. I have got a software update notification couple of days ago. I've clicked on it today, and it started installing updates.
But, I have got a notification telling that not all updates were installed successfully, then I have clicked on "Restart" from the notification box. Then my Mac restarted and the white screen with Apple logo and the update progress appeared (like what always happens during updates).
The problem that while the update progress reached around half the way, my Mac shutdown. I tried many times to turn it on, it turns and the same white screen appears and the update starts again and shuts down.
Please Help me!
MacBook Air (11-inch Mid 2009)Welcome to Apple Discussions
You did not state whether you installed the update while on battery (not mains) power. You are warned not to apply certain updates without being connected to a charger & mains power.
Also remove any attached peripherals.
Reboot in Repair mode (command-R at start) and use Disk Tools-Disk Utility-Disk First AId to repair your disk, and as long as you're there repair permissions. Next quit Disk Tools and reinstall the OS. After completing that successfully reboot, log in and do a combo update.
You must have more than enough (not just enough) empty (free) disk space for the update. -
After the update of iOS7 my iPad screen flickers
After the update of iOS 7 my iPad screen flickers and when scrolling the pages the screen gets blurry. In App Store some app will not download or it will buffer for long and will turn off. Any suggestion?
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
IOS4 update home screen wallpaper
The iPod touch update to get a home screen wallpaper can you do something?
Wallpaper is not supported on iPod Touch 2G. Only if you have an iPod Touch 32GB or iPod Touch 64 GB.
-
So I updated my iPhone 5s to version 7.0.6 yesterday, and now my iPhone music isn't working properly. It won't sync the playlists that I added after the update though when it's plugged in on iTunes it says that the music is synced. When I select a song in a playlist on the phone it shuffles through the playlists for like 3 seconds and picks a totally different song to play. I tried reinstalling iTunes, I tried restoring the iPhone, is it just a bug with the update? Nothing works. Any solutions are welcome.
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
-
After The updating for IOS I can't find my hotspot even after the latest update IOS 7.0.4 ! I can't use my IPad as a modem any more again!
please I need some one to tell me how can I return my hotspot option?Hi there Buhamdaaan,
You may find the information in the articles below helpful.
iOS: Understanding Personal Hotspot
http://support.apple.com/kb/ht4517
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/ts2756
-Griff W. -
I just updated firefox TODAY 8/17/11 and after the update i can't open firefox unless i restart my computer or i delete firefox going to windows task manager and process, also, i can't open a new window, it won't allow it. please help me, everything works on IE, Google Chrome and Safari, everything went wrong after the update
Hey Elaine07!
I have an article here that can help you with that issue. This article will help you make sure you have uninstalled iTunes correctly and help you troubleshoot the launch issues you are seeing:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Take care, and thanks for visiting the Apple Support Communities.
-Braden
Maybe you are looking for
-
"Firefox is already running" error
I am running Windows 7 with 3 different user profiles, all of which run Firefox seamlessly, but one. I have tried the different options listed on the main forum for this; however, the issue persists. I have uninstalled and reinstalled the application
-
How to assign file extension and custom icon to executable?
Hi all, I was reading an old thread about this issue: http://forums.ni.com/ni/board/message?board.id=170&thread.id=116925 I need to try to do this. My application uses a custom file extension (i.e. .abc). Upon installation I would like to: 1. Ass
-
I used to have a Yahoo tab shown when yahoo was opened. Now it says "Getting Started" How can I get my Yahoo tab back? Thank you.
-
Resources are not configurable under RMCM and User
Hi I am using UCCX 8 with CUCM. Whatevere Agnet / end user I am making in CUCM its coming to UCCX. But I can not getting them onder RMCM. When I am going uder tools>viewuser and clicking one user and Configuring resources its gives error "Error Occur
-
Macbook Air late 2008 running extremely slow
I just bought a Macbook Air late 2008 online & when i recieved it it had been wiped out and set back to it's original favroty settings. The battery is completely dead so it must be charged at all times. Everytime I use the laptop it is extremely slow