Home Server 2011 Stopped Working

Hey there. I work with a windows Home Server 2011 and recently it wasn't accessing a certain report that I need. I restarted it to see if that would fix it. When it restarted, it went through the Windows loading screen, then went to a black screen. I could
not get it to boot into safe mode. After about 10 minutes of nothing, I hard reboot it. I did this process 2 or 3 more times to no avail. Now the server will not even power on. Does anyone have any ideas or suggestions to troubleshoot this?

Hi amazingbass,
As you mentioned the server not even power on, it mostly is some hardware may have issue, please contect your hardware vendor for the first step troubleshooting. Bas on my experience and from your description the server went black screen and can not complete
startup it some times caused by the disk corrupt, you can focuse this issue first.
Best regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

All 30 minutes my Macs (iMac/Snow Leopard, MacMini/Lion) are loosing the connection to the Windows Servers (2 Networks: Home with Home Server 2011 (Server 2008) and Office with Home Server V1 (Server 2003)).

Hallo,
Ich betreibe im Büro und zu Hause jeweils einen Microsoft Home Server. In beiden Netzwerken ist neben diversen Windows Rechnern auch ein Mac vorhanden.
Die jeweilige "Konfiguration" ist wie folgt:
- Apple MacMini (Late 2011, als HTPC) mit Lion per Wlan über AVM Fritzbox 7390 an Microsoft Windows Home Server 2011 (Windows Server 2008).
- Apple iMac (Late 2010, Arbeitsplatzrechner) mit Snow Leopard per Lan über AVM Fritzbox 7270 an Microsoft Windows Home Server V1 (Windows Server 2003)
Alle Betriebssysteme sind auf aktuellem Stand.
Die Fritzboxen laufen mit der jeweils aktuellen Firmware
Nun zu dem Problem:
Beide Macs unterbrechen ca. alle 30 min den Kontakt zum Server. Die Verbindung wird zwar ca. 1-2 Minute später wieder aufgebaut, aber am MacMini (HTPC) macht sich dadurch bemerkbar, daß der Film oder die Musik für obige Zeitspanne stoppt und danach weiterläuft. Beim iMac (Arbeitsrechner) kann ein zuvor vom Server geladenes Dokument dann nicht mehr gespeichert oder gedruckt werden.
Der MacMini hat dieses Phänomen direkt bei der Verbindung mit dem WHS gezeigt. Der iMac hat jedoch zuvor ca. 1,5 Jahre ohne Probleme funktioniert. Dieses Problem tritt bei dem iMac (Snow Leopard) erst seit ca. 6-9 Monate auf.
Da unterschiedliche WHS und OS X Versionen betroffen sind und auch unterschiedliche Fritzboxen verwendet werden und scheint ein allgemeines Problem im Zusammenspiel Windows/OS X vorzuliegen.
Bei dem iMac fällt der genaue Zeitpunkt der Verbindungsunterbrechung nicht auf.
Bei dem MacMini läßt sich der Zeitpunkt dagegen relativ leicht bestimmen. Aus der Ereignisanzeige beim Windows Server ergibt sich leider kein eindeutiges Fehlerbild. Zu dem jeweiligen Zeitpunkt taucht aber relativ oft, aber nicht immer (!), in "Windows-Protokolle Sicherheit" der Fehler 4625 ("Fehler beim Anmelden eines Kontos") auf. Dies würde auf eine Rechteproblematik hindeuten. Das Konto des Mac kann aber alles was ihm auf dem WHS erlaubt ist.
Beim Suchen nach einer Lösung (bisher leider erfolglos) bin ich u.a. auch über das Problem des Server Infrastructure License Services (silsvc) beim Windows Small Business Server 2011 Essentials gestolpert (auch alle 30 min!). Vielleicht ein Zusammenhang?
Hello,
I run the office and at home each a Microsoft Home Server. In both networks, in addition to various Windows computers, a Mac is available.
The particular "configuration" is as follows:
- Apple MacMini (Late 2011, as HTPC) with Lion via wifi via AVM Fritzbox 7390 to Microsoft Windows Home Server 2011 (Windows Server 2008).
- Apple iMac (Late 2010, desktop PC) with Snow Leopard by Lan on AVM Fritzbox 7270 on Microsoft Windows Home Server V1 (Windows Server 2003)
All operating systems on current conditions with all patches and updates.
The Fritz boxes running with the latest firmware
Now to the problem:
Both Macs are loosing every 30 minutes the contact to the server. The connection is "re-"established about 1-2 minutes later. On MacMini (HTPC), the film or music is stopped for the above period. Thereafter, the film / music goes on. With the iMac (workstation) a document loaded from the server can no longer be saved or printed.
The MacMini has shown this phenomenon directly in connection with the WHS. However, the iMac has been working about 1.5 years with no problems. This problem only occurs for about 6-9 months
Because of different WHS and OS X versions are affected and also different Fritz boxes are used and it seems to be a general problem in the interplay Windows / OS X to be present.
When the iMac is the exact date of disconnection does not occur.
With the Mac Mini, the time can however be determined relatively easily. From the Event Viewer on Windows Server is unfortunately no clear error image. At the particular time but appeared relatively often, but not always (!) In Windows Security Logs the error 4625 (Failed to log on an account) on. This would indicate a rights issue.
Searching for a solution (so far unsuccessfully, unfortunately), I stumbled over the problem of the Server Infrastructure License Services (silsvc) in Windows Small Business Server 2011 Essentials (every 30 min!). Maybe a connection?

Hi, and thank you for your reply!
My reason for not posting this in the server forum is that I suspect it is a clien issue. All my other clients connect happily to the server which leads me to believe the server is configured correctly.
Only my the two MacBook Pro's are having problems.

Windows Home Server 2011 and Windows 8.1 desktop

My questions is whether a Windows Live account and a local account can be combined in Windows 8. I asked this question in Microsoft Community and
an MS employee said I should ask my question here.
Is there a way to have both active?
I want to reap the benefits of having a live account to keep everything in sync and fully utilize the features of Windows 8.1 but I have a Windows Home Server 2011 that requires that I have a local user account that matches the server side so that I can
use resources on the server.
I've seen lots of tutorials for switching between the two account types but nothing for combining them.
Is this even possible?
Thanks in advance

Your question has not been answered.
Windows Home Server 2011 does not use domains, so even if you had Windows 8.1 Pro, you'd still be left without a solution. I have one PC with Windows 8.1 Enterprise and that does work with Home Server; and a laptop with Windows 7 Pro and that works fine
too. Like you, I have issues with Windows 8.1 Pro.
Does anyone from Microsoft Server actually read these posts?
@PeterPensive,
the OP's original question was relating to "linking/combining" an MS Account with a Win8.x local account. That question was answered. (the answer is no), so, for a WHS scenario, linked accounts aren't possible, but, in Win8.x, an MS Account might be suitable
for use with WHS.
Are you confirming that an MS Account on Win8.x works ok with WHS?
< Also, this is a community-driven forum - MS staff rarely, if ever, participate here.. >
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

TS1490 i am running Windows Home Server 2011 and iTunes can't seem to connect to the iTunes Store nor run Genius on my Library. What do I need to do?

I am running Windows Home Server 2011 and have installed iTunes on my dedicated server, attached to my router. I can't connect to the iTunes Store nor run Genius on the server ONLY (iTunes runs fine on by two other PCs and my Apple TV and I share the libary that resides on the server). I am running a very current version of iTunes 64 bit. I have run the connectivity test and it failed.
My guess is that there is some setting in the Server software that i need to change to let iTunes access urls or computers on the internet. Does anyone have any experience with this software combination?
Thank you

Some guy managed to get this to work. The following link is for iTunes 10.5 but it should work for the current release.
http://social.microsoft.com/Forums/en-US/whs2011/thread/bd62ee3d-a933-4cad-ae9b- fd38adc994c0
Good luck!

Cannot connect from iMac to Windows Home Server 2011 shares

Hi guys,
I am having dificulties connecting from iMac to Windows Home Server 2011 shares.
First of all it takes so long time to discover the share in iMac, which it's called "mediaserver". After finding it i cannot connect and gives "Connection Failed: message. If i choose "Connect As.." option i wait some time and then pops out with an error: "There was a problem connecting to the server "mediaserver". The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
If i try from Finder -> Go -> Connect to Server ... write in Server Address : smb://mediaserver it fails. But if i write the IP address, like: smb://192.168.1.42 it works after couple of tries. If i try now to Make an Alias for the share i get "The operation can't be completed. An unexpected error occurred (eror code -8060)."
Has anyone experienced these problems ? I have updated to Mac OS X version 10.7.3. Could that be the problem ?
Any help will be much appreciated.
Thank you in advance,
Simi

You need to reinstall the updated WHS connector for Mac. You should then be able to access your shares on WHS 2011.
The problem I'm having is I can't get Time Capsule to recognize the WHS 2011 mapped folders that show up on the desktop as a drive, so Backup won't work.

How do you view Windows Home Server 2011 Video on iPad 2

I have uploaded iPhone 4s .mov files from iPhone 4s to Windows Home Server 2011. The iphone can play these back but the iPad Safari reports downloading but does nothing after that. Will not play video. I can email the iPhone 4s video to iPad 2 and view the video but just not through web browser.

Lancem631-
I think your MOV files are compatible with the iPad, but are not recognized as being compatible in Safari. This is something that should be reported by providing feedback to Apple at <iPad Feedback>. If more people report the problem, Apple is more likely to fix it.
To work around the problem, you can convert the MOV files to MP4, which should be compatible. One program that can do this conversion is HandBrake. <Download HandBrake>
Fred

Officejet pro 6830 & windows home server 2011

Our Officejet Pro 6500 just died, and I replaced it with an Officejet Pro 6830. The printer is connected to our server, which runs Windows Home Server 2011. While installing I learned there is not a driver for Home Server 2011? I also discovered that my wife cannot print wirelessly because the printer is hardwired to the network. Really? Everything worked with the printed that died. These two issues are pretty major for us. Are there workarounds?

Your Win8 PC is likely to have come with UEFI and uses GPT hard disks, so you need to install a hotfix on the server to allow it to back up the client PCs.
There’s a separate fix for each server version:
SBS 2011 Essentials
http://support.microsoft.com/kb/2781270
Windows Storage Server 2008R2 Essentials
http://support.microsoft.com/kb/2781274
Windows Home Server 2011
http://support.microsoft.com/kb/2781272
Install the hotfix, reboot the server, and you should be able to back up the PC, although in my experience, you also need to exclude any partitions on the PC that don't have drive letters.
John
-- John Murdoch APOJ Ltd

Can I install windows home server 2011 on a mac mini?

Hey guys and girls...
Can I install windows home server 2011 on a mac mini? If so how?

WHS is 64-bit. Genius are really not versed in Boot Camp or Windows, let alone anything not on the "approved" list of Windows versions.
Most of the problems are with burning ISO, or the SuperDrive. It should have seen the NTFS partition. Disk Utility is known to be trouble, burning it on your Mac Mine but iwth Windows 7....?
Seeing you have Windows 7, format the partition to NTFS 160GB you want and then exit and boot WHS installer.
Or run the install from Windows 7.
In past, WHS supported TimeMachine, streaming video, supported iTunes (that was broken/disabled it seems by Apple with 10.0), as well as even SuperDuper backups.
Main idea is to have some network attached drives.
Netgear ReadyNAS Ultra2 Review
Newegg - HP StorageWorks X310 Windows Home Server
I have both a ISO and Burned it to a dvd useing windows 7 built in ISO burning software, Its a 64 bit copy (got from microsoft download website from my dads microsoft account).
It is enouth for the OS but it runs slowish on the mac mini (latest core 2 duo 2.4ghz model) The Idea was to have it backup my pc and laptop to a usb drive and act as a media centre pc (connected to av receaver and tv and on a gigabit network with a 2TB nas)
Since it looks like this may not work, whats the best way to make it into a media centure? mac osx? windows 7? plex? whats best and good?
I'd avoid USB like the plague. Why not use your PC instead? If I was going to use a Mini for WHS, I'd just use the Mini solely for Windows and not have OS X (you can boot OS X off an external drive anyway).

Upgrade from Windows Home Server 2011

Even though Windows Server 2012 Essentials is being mentioned as a replacement for Windows Home Server 2011, there doesn't seem to be any documentation or mention of can you upgrade from Windows Home Server 2011 to Windows Server 2012 Essentials?
Will this work with the beta download and will we then be able to upgrade this version to the RC and/or release version?
As you may guess I have a Windows Home Server 2011 and am interested in looking at Windows Server 2012 Essentials to see what it offers me. The storage spaces sounds exactly what I want to replace the drive extender on the previous home server version. The
problem is that I don't mind sacrificing my present server box by installing the beta but it would be nice if it actually retained what settings it could via an upgrade option, which I could then have a chance of using with a proper release version.

Just clarifying about the 'upgrade path' and 32b vs 64b.
Yes, no in-place upgrade. However, one could theorise about some form of 'migration' being possible, where the list of users, the content of your shares, the current backups, would be 'moved' from old box to new.
I was in fact pretty sure no such process existed. (Wouldn't it be neat though? AND in future _at least theoretically_ possible, using processes similar to SBS AD migration.)
From this perspective putting the new box onto the network is similar to replacing WHSv1 with WHS11, in that nothing is carried over. No gain, but no lesser. Working on currently available information.
The later comment about the work laptop is, TTBOMK, a resounding 'NO'. When attempting to join a member of another AD the 'connect' process stated 'You must 1st remove the PC from the other AD'. I haven't tested this extensively but believe that PC's _capable_
of operating in an AD (Pro, vs Home, versions) will be made members of the WS12E AD. It is only PC's that do not have 'domain join' capability that are left in workgroup mode.
TTBOMK, AFAICS, so far, etc...

WVC80N & Windows Home Server 2011 R2

I have successfully installed my WVC80N on my network and can view it from my laptop and phone both when i am on my network and over the internet.
The problem i am having now is trying to get it to work with my Windows Home Server 2011 R2. I can not get it to display the video unfortunately and was wondering if anyone knew why this was happening. My best guess is that my Home Server has a port blocked that is used to receive the video.
Any help would be greatly appreciated.

It could be a browser setting on the server computer. Try to check the browser settings and you may need to adjust the firewall settings on the computer as well. And if possible, try to use another browser to view the video. By the way, even on local access for the camera or video it does not work?

Windows home server 2011

is still possible to purchase windows home server? we were given an old server we thought it would work great as a file sharing server but I can't seem to purchase windows home server 2011 any longer, I found used copies on Amazon but I'm afraid
I won't be able to activate it.

Hi
You can look at Windows Server 2012 foundation or Essentials. Maximum 15 and 25 users respectively.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Windows Home Server 2011 - Remote Desktop Issues

I had been using my administrator account to log into my headless Home Server remotely. Didnt have to do it often. I tried today and got:
"To log on to this remote computer, you must be granted the Allow log on through
Terminal Services right. By default, members of the Remote Desktop Users group have this
right. If you are not a member of the Remote Desktop Users group or another group that
has this right, or if the Remote Desktop User group does not have this right, you must be
granted this right manually."
How can I log into the machine to give myself rights? Am I going to have to yank it down out of the closet and hook it up to a monitor?

Your question has not been answered.
Windows Home Server 2011 does not use domains, so even if you had Windows 8.1 Pro, you'd still be left without a solution. I have one PC with Windows 8.1 Enterprise and that does work with Home Server; and a laptop with Windows 7 Pro and that works fine
too. Like you, I have issues with Windows 8.1 Pro.
Does anyone from Microsoft Server actually read these posts?
@PeterPensive,
the OP's original question was relating to "linking/combining" an MS Account with a Win8.x local account. That question was answered. (the answer is no), so, for a WHS scenario, linked accounts aren't possible, but, in Win8.x, an MS Account might be suitable
for use with WHS.
Are you confirming that an MS Account on Win8.x works ok with WHS?
< Also, this is a community-driven forum - MS staff rarely, if ever, participate here.. >
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

My iPhone 5 won't charge properly, computer doesn't recognise it and the home button has stopped working completely, it hasn't been dropped or water damaged at all, any ideas?

My Iphone 5 won't charge properly, computer won't recognise the device and also the home button has stopped working completely, it hasn't been dropped or suffered any water damage, anybody else had anything like this? and what are the solutions? thanks

If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.

My iPad 2 home button has stopped working I have tried the swivel from landscape to portrait whilst holding the button, I have tried holding the off button then the home button and I was told I could create my own home button in the settings but I can't!

My iPad 2 home button has stopped working all together, I have tried the swivel from landscape to portrait whilst holding the home button, I've tried pressing the off switch then pressing the home button, the other thing I was advised to do was create a home button in the settings under the accessibility option but I don't have the option I was advised to use under there! Help! It's really frustrating having to turn the device off everytim I want to switch apps and I really can't afford to send it away to be mended! Many thanks in advance

The accessibilty setting that was mentioned is:
* Enable AssistiveTouch
Enable AssistiveTouch which floats a virtual button on-screen which can mimic all hardware buttons on the device:
Settings>General>Accessibility>AssistiveTouch: turn ON
*Note* If you power off the device using the AssistiveTouch panel (tap the on-screen AssistiveTouch button, Device>Lock Screen (tap and hold to power off)), you will NOT be able to power on the device *if your Sleep/Wake (power) button is not functioning*. You will need to connect the powered off device either to a PC's USB port or an external charger to power the device back on.

My home button has stopped working on my iPod touch 4th gen. Is there a way to fix it?

My home button has stopped working all together!!!!! Any ideas how to fix??
Many thanks.

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Home Server 2011 Stopped Working

Similar Messages

Maybe you are looking for