Home server

Hi, I hope this is the right section of the forum to post my question. I want to build a home server with a spare atom htpc and I want to base it on arch. However I have searched a lot on the internet I haven't found good web interfaces to control it.
The home server will have the following features:
- backup/restore
- printer sharing
- store/access files ( samba or nfs as I have only linux and macos machines )
- streaming audio/video
- search for files on the server
So my main concerns are a good service to index the files and a web interfaces to manage all the functions. I mean a web interface like that of freenas, freevo and amahi.

Indeed: webmin for the easy configuration (although the CLI is not that hard to set up what you would want) and take a look here to index the files:
http://lucene.apache.org/tika/
I have plans to install Tika to our server, but I haven't got the time (read: other priorities). It has the added bonus that it is a part of apache, which you will need for webmin and maybe for other websites that come with some of your packages (f.e. mediatomb has a webGUI). So the extra dependencies for this indexer are low or even non-existent.

Similar Messages

Windows Home Server 2011 and Windows 8.1 desktop

My questions is whether a Windows Live account and a local account can be combined in Windows 8. I asked this question in Microsoft Community and
an MS employee said I should ask my question here.
Is there a way to have both active?
I want to reap the benefits of having a live account to keep everything in sync and fully utilize the features of Windows 8.1 but I have a Windows Home Server 2011 that requires that I have a local user account that matches the server side so that I can
use resources on the server.
I've seen lots of tutorials for switching between the two account types but nothing for combining them.
Is this even possible?
Thanks in advance

Your question has not been answered.
Windows Home Server 2011 does not use domains, so even if you had Windows 8.1 Pro, you'd still be left without a solution. I have one PC with Windows 8.1 Enterprise and that does work with Home Server; and a laptop with Windows 7 Pro and that works fine
too. Like you, I have issues with Windows 8.1 Pro.
Does anyone from Microsoft Server actually read these posts?
@PeterPensive,
the OP's original question was relating to "linking/combining" an MS Account with a Win8.x local account. That question was answered. (the answer is no), so, for a WHS scenario, linked accounts aren't possible, but, in Win8.x, an MS Account might be suitable
for use with WHS.
Are you confirming that an MS Account on Win8.x works ok with WHS?
< Also, this is a community-driven forum - MS staff rarely, if ever, participate here.. >
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How do I add my phone's Wi-Fi Mac address to my home server so that I can use my home Wi-Fi with my phone?

Hello. I am using an Android cell phone and, though the phone sees my home server name and accepts my password, it won't connect. I understand that I may have to add my phone's Wi-Fi Mac address to my home server in order for it to allow my phone access, but I have no idea how I might do that. Could someone help me with this? Thank you.

Tdalso wrote:
How do I add a phone number so I can use either my US or Canadian number (depending on where I am) with iMessage and Facetime on both my iPhones?
You need to log out of iMessage and Facetime, make sure your number is correct in Settings/General/About, then log back in again to send a new activation request.

For home server...

I have a PowerMac G4 MDD that I'm using for my home file server. I have a copy of OS X 10.4 server and would like to setup a complete environment for my home, Mail, Web, iChat, DNS, Time, File servers...
I'm not an IT person by trade, just hobby. So my knowledge is limited. I currently have a FreeBSD server doing most of this work already but would like to move it to OS X. Because of my FreeBSD home server I'm pretty familire with what the services do, just not what is needed to set it up to begin with in OS X.
My problem is that although I know quite a bit about UNIX and such, I don't know anything about what needs to be setup in addition to the services I want, and in what order they need to be set up? For instance, the term directory has a completely seperate meaning then what I'm use to and this is exaserbating my confusion...
Is there a howto or guide somewhere that is written for some one of my limited knowledge of formal IT abilities to help setting up a home based server (for idiots).
Thanks for any help.
RPR

if you have experience with configuring and using freebsd, you're already ahead of most people who are likely to setup os x server.
start with the server documentation here: http://www.apple.com/server/macosx/resources/
check john de troye's tips doc: http://tinyurl.com/8qb77l
there are also some quick setup guides like this one around the web: http://wiki.bssd.org/images_up/6/65/LeopardServer.pdf
check http://afp548.com and its forums for details on troubleshooting and extending os x server.

Home Sharing in Itunes 9 on Windows Home Server

I have installed iTunes 9 and have started using Home Sharing. I want to be able to use Home Sharing with my WHS (Windows Home Server) as our music is stored there and we have iTunes on all computers, plus 2 iphones and iPods.
This would need a Home Sharing server (service) to run on the WHS. Has Apple produced such a piece of software or can I install the Home Sharing component of iTunes 9 on my server? I am advised (by Microsoft) that installing iTunes 9 is not a good idea on WHS as WHS is designed to run services not user apps.
Any suggestions or has Apple someting in plan?
It seems that sharing between PCs is a bit behind the times when many people have moved over to Home Servers or NAS drives.

I too would like to would like to know how to implement iTunes on Windows Home Server (WHS) so my Music library can be stored on a redundant source that is always available to be accessed from any PC in the house. Does Apple have a way to do this or plans to create a product for WHS?
I understand Firefly can be used to stream music content on a WHS, but think this should be a complete iTunes solution with a common library and allow playlist storage from iTune clients that connect to it.

All 30 minutes my Macs (iMac/Snow Leopard, MacMini/Lion) are loosing the connection to the Windows Servers (2 Networks: Home with Home Server 2011 (Server 2008) and Office with Home Server V1 (Server 2003)).

Hallo,
Ich betreibe im Büro und zu Hause jeweils einen Microsoft Home Server. In beiden Netzwerken ist neben diversen Windows Rechnern auch ein Mac vorhanden.
Die jeweilige "Konfiguration" ist wie folgt:
- Apple MacMini (Late 2011, als HTPC) mit Lion per Wlan über AVM Fritzbox 7390 an Microsoft Windows Home Server 2011 (Windows Server 2008).
- Apple iMac (Late 2010, Arbeitsplatzrechner) mit Snow Leopard per Lan über AVM Fritzbox 7270 an Microsoft Windows Home Server V1 (Windows Server 2003)
Alle Betriebssysteme sind auf aktuellem Stand.
Die Fritzboxen laufen mit der jeweils aktuellen Firmware
Nun zu dem Problem:
Beide Macs unterbrechen ca. alle 30 min den Kontakt zum Server. Die Verbindung wird zwar ca. 1-2 Minute später wieder aufgebaut, aber am MacMini (HTPC) macht sich dadurch bemerkbar, daß der Film oder die Musik für obige Zeitspanne stoppt und danach weiterläuft. Beim iMac (Arbeitsrechner) kann ein zuvor vom Server geladenes Dokument dann nicht mehr gespeichert oder gedruckt werden.
Der MacMini hat dieses Phänomen direkt bei der Verbindung mit dem WHS gezeigt. Der iMac hat jedoch zuvor ca. 1,5 Jahre ohne Probleme funktioniert. Dieses Problem tritt bei dem iMac (Snow Leopard) erst seit ca. 6-9 Monate auf.
Da unterschiedliche WHS und OS X Versionen betroffen sind und auch unterschiedliche Fritzboxen verwendet werden und scheint ein allgemeines Problem im Zusammenspiel Windows/OS X vorzuliegen.
Bei dem iMac fällt der genaue Zeitpunkt der Verbindungsunterbrechung nicht auf.
Bei dem MacMini läßt sich der Zeitpunkt dagegen relativ leicht bestimmen. Aus der Ereignisanzeige beim Windows Server ergibt sich leider kein eindeutiges Fehlerbild. Zu dem jeweiligen Zeitpunkt taucht aber relativ oft, aber nicht immer (!), in "Windows-Protokolle Sicherheit" der Fehler 4625 ("Fehler beim Anmelden eines Kontos") auf. Dies würde auf eine Rechteproblematik hindeuten. Das Konto des Mac kann aber alles was ihm auf dem WHS erlaubt ist.
Beim Suchen nach einer Lösung (bisher leider erfolglos) bin ich u.a. auch über das Problem des Server Infrastructure License Services (silsvc) beim Windows Small Business Server 2011 Essentials gestolpert (auch alle 30 min!). Vielleicht ein Zusammenhang?
Hello,
I run the office and at home each a Microsoft Home Server. In both networks, in addition to various Windows computers, a Mac is available.
The particular "configuration" is as follows:
- Apple MacMini (Late 2011, as HTPC) with Lion via wifi via AVM Fritzbox 7390 to Microsoft Windows Home Server 2011 (Windows Server 2008).
- Apple iMac (Late 2010, desktop PC) with Snow Leopard by Lan on AVM Fritzbox 7270 on Microsoft Windows Home Server V1 (Windows Server 2003)
All operating systems on current conditions with all patches and updates.
The Fritz boxes running with the latest firmware
Now to the problem:
Both Macs are loosing every 30 minutes the contact to the server. The connection is "re-"established about 1-2 minutes later. On MacMini (HTPC), the film or music is stopped for the above period. Thereafter, the film / music goes on. With the iMac (workstation) a document loaded from the server can no longer be saved or printed.
The MacMini has shown this phenomenon directly in connection with the WHS. However, the iMac has been working about 1.5 years with no problems. This problem only occurs for about 6-9 months
Because of different WHS and OS X versions are affected and also different Fritz boxes are used and it seems to be a general problem in the interplay Windows / OS X to be present.
When the iMac is the exact date of disconnection does not occur.
With the Mac Mini, the time can however be determined relatively easily. From the Event Viewer on Windows Server is unfortunately no clear error image. At the particular time but appeared relatively often, but not always (!) In Windows Security Logs the error 4625 (Failed to log on an account) on. This would indicate a rights issue.
Searching for a solution (so far unsuccessfully, unfortunately), I stumbled over the problem of the Server Infrastructure License Services (silsvc) in Windows Small Business Server 2011 Essentials (every 30 min!). Maybe a connection?

Hi, and thank you for your reply!
My reason for not posting this in the server forum is that I suspect it is a clien issue. All my other clients connect happily to the server which leads me to believe the server is configured correctly.
Only my the two MacBook Pro's are having problems.

TS1490 i am running Windows Home Server 2011 and iTunes can't seem to connect to the iTunes Store nor run Genius on my Library. What do I need to do?

I am running Windows Home Server 2011 and have installed iTunes on my dedicated server, attached to my router. I can't connect to the iTunes Store nor run Genius on the server ONLY (iTunes runs fine on by two other PCs and my Apple TV and I share the libary that resides on the server). I am running a very current version of iTunes 64 bit. I have run the connectivity test and it failed.
My guess is that there is some setting in the Server software that i need to change to let iTunes access urls or computers on the internet. Does anyone have any experience with this software combination?
Thank you

Some guy managed to get this to work. The following link is for iTunes 10.5 but it should work for the current release.
http://social.microsoft.com/Forums/en-US/whs2011/thread/bd62ee3d-a933-4cad-ae9b- fd38adc994c0
Good luck!

HP MediaSmart Home Server EX 490 won't boot up and can't recover - running Windows XP

Recently my Home Server launched successfully and I had it available on my new home network. I played a video on .api format via ethernet cable to my tv and I could see the server in my network directory.
A few days ago I tried to access the server with a brand new MacBook through a wireless browse. I couldn't access as a guest so I decided to try to launch it with a direct ethernet connection from the old PC which I used to set up the server in 2010 (running Windows XP 2002 edition SP3).
The server did not boot up properly and i have had a flashing red light since in the status light (far right) on the front of the server.
I have attemped a recovery using the disks that came with the server and following instructions from HP support when I needed to recover it once before (while it was still under warrantly and supported by HP). The recovery process looked like it was working until it reached an "Unidentified Error" at Stage 4.
Has anyone got any advice about how I could resintall the OS on the Server in this state while making best endeavour to not lose the data? Is the OS on the SYS drive and is that the lowest drive? Can I take the other drives out and rebuild the OS then put them back in and access the data? HP have had me chasing wild geese for hours over the phone and I'm ready to explode.

Correction: Recovery process failure at Step 2 of 4

Windows Home Server and iTunes

Hi, I have the following setup (all machines on GBit LAN):
- a Windows Home Server machine with all my music on it (currently stored raw on the filesystem)
- 3 Windows XP machines
- 2 iPods
I would like an authoritative answer on how to setup iTunes on my network so that:
- I can maintain a central, organised store of my music on the Windows Home Server
- I can access all my music and podcasts on the PCs without having to copy it locally
- I can sync my iPods normally
I would like to avoid 3rd party software such as Firefly if at all possible. The WHS machine runs headless (as is normal practice) so any solution should avoid the use of desktop apps like iTunes on the server.
As WHS is gaining widespread acceptance as a home file and media server, if Apple do not have a suggested setup for iTunes/WHS I would suggest it would be a good idea to develop one.
Please note, with respect, I would like to avoid speculation. If you haven't actually done the above and proven the solution, please refrain from speculating to avoid people (myself included) going down potential dead ends.
Thank you

Has anyone found a way around this?
Message was edited by: postrooms

Windows Home Server and Apple TV 2

There are some old threads talking about Windows Home Server and the original Apple TV - the HP Windows Home Servers actually have excellent Mac support and out of the box with the Twonky Media Server that is bundled with the HP WIndows Home Servers would stream to the original Apple TV with no issue.
The wrinkle is the Apple TV 2 requires Home Sharing. I'm not going to debate good/bad - it is what it is. I was searching for a way to get my WHS working with my Apple TV 2 since I'm finally getting around to automating the transcoding of my Tivo files and I would much rather my WHS be my media server than my Mac. I came across this article that seems perfectly reasonable:
http://forum.wegotserved.com/index.php/topic/16359-whs-and-apple-tv-v2/
I haven't tried it yet, but it seems perfectly reasonable. Has anyone else tried it? I'll report back either way - if I remember to

"But can it be both simultaneously?
Both a server and a media machine that is showing a movie on your TV?"
Yes it can, no problems.
The Mini Server OSX is pretty much the same as the client Snow Leopard, complete with Front Row, iTunes, Mail, Safari etc, but no iLife09 supplied - you will have to pay extra for that.
It will do everything that Snow Leopard will do but has all the server capabilities too if you know how to set it up/use the software.
The only things I had trouble with was I can't find Migration Assistant and a strange quirk is that it won't share a USB connected printer across a network! No sign of printer sharing in System prefs but I guess you can do it via the Server config somewhere...
I just used CUPS to enable Bonjour printer sharing - works fine
I have been able to insatll everything I had on my previous CoreDuo Mini including Final Cut Express, iLife09, EyeTV, some bit torrent stuff - all works fine...
I really like the fact that I can plug two monitors in - I have the MiniDVI connected to a 50" plasma and 1080p Projector (using an HDMI splitter), the Mini Display port feeds a separate 20" widescreen monitor - when the plasma/PJ is switched off the main display automatically switches back to the 20" monitor
All in all this MiniServer is a great little HTPC - powerful and silent with 1TB of storage. The Server software is a bonus I haven't even looked at as yet

Cannot connect from iMac to Windows Home Server 2011 shares

Hi guys,
I am having dificulties connecting from iMac to Windows Home Server 2011 shares.
First of all it takes so long time to discover the share in iMac, which it's called "mediaserver". After finding it i cannot connect and gives "Connection Failed: message. If i choose "Connect As.." option i wait some time and then pops out with an error: "There was a problem connecting to the server "mediaserver". The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
If i try from Finder -> Go -> Connect to Server ... write in Server Address : smb://mediaserver it fails. But if i write the IP address, like: smb://192.168.1.42 it works after couple of tries. If i try now to Make an Alias for the share i get "The operation can't be completed. An unexpected error occurred (eror code -8060)."
Has anyone experienced these problems ? I have updated to Mac OS X version 10.7.3. Could that be the problem ?
Any help will be much appreciated.
Thank you in advance,
Simi

You need to reinstall the updated WHS connector for Mac. You should then be able to access your shares on WHS 2011.
The problem I'm having is I can't get Time Capsule to recognize the WHS 2011 mapped folders that show up on the desktop as a drive, so Backup won't work.

How do you view Windows Home Server 2011 Video on iPad 2

I have uploaded iPhone 4s .mov files from iPhone 4s to Windows Home Server 2011. The iphone can play these back but the iPad Safari reports downloading but does nothing after that. Will not play video. I can email the iPhone 4s video to iPad 2 and view the video but just not through web browser.

Lancem631-
I think your MOV files are compatible with the iPad, but are not recognized as being compatible in Safari. This is something that should be reported by providing feedback to Apple at <iPad Feedback>. If more people report the problem, Apple is more likely to fix it.
To work around the problem, you can convert the MOV files to MP4, which should be compatible. One program that can do this conversion is HandBrake. <Download HandBrake>
Fred

Officejet pro 6830 & windows home server 2011

Our Officejet Pro 6500 just died, and I replaced it with an Officejet Pro 6830. The printer is connected to our server, which runs Windows Home Server 2011. While installing I learned there is not a driver for Home Server 2011? I also discovered that my wife cannot print wirelessly because the printer is hardwired to the network. Really? Everything worked with the printed that died. These two issues are pretty major for us. Are there workarounds?

Your Win8 PC is likely to have come with UEFI and uses GPT hard disks, so you need to install a hotfix on the server to allow it to back up the client PCs.
There’s a separate fix for each server version:
SBS 2011 Essentials
http://support.microsoft.com/kb/2781270
Windows Storage Server 2008R2 Essentials
http://support.microsoft.com/kb/2781274
Windows Home Server 2011
http://support.microsoft.com/kb/2781272
Install the hotfix, reboot the server, and you should be able to back up the PC, although in my experience, you also need to exclude any partitions on the PC that don't have drive letters.
John
-- John Murdoch APOJ Ltd

Can I install windows home server 2011 on a mac mini?

Hey guys and girls...
Can I install windows home server 2011 on a mac mini? If so how?

WHS is 64-bit. Genius are really not versed in Boot Camp or Windows, let alone anything not on the "approved" list of Windows versions.
Most of the problems are with burning ISO, or the SuperDrive. It should have seen the NTFS partition. Disk Utility is known to be trouble, burning it on your Mac Mine but iwth Windows 7....?
Seeing you have Windows 7, format the partition to NTFS 160GB you want and then exit and boot WHS installer.
Or run the install from Windows 7.
In past, WHS supported TimeMachine, streaming video, supported iTunes (that was broken/disabled it seems by Apple with 10.0), as well as even SuperDuper backups.
Main idea is to have some network attached drives.
Netgear ReadyNAS Ultra2 Review
Newegg - HP StorageWorks X310 Windows Home Server
I have both a ISO and Burned it to a dvd useing windows 7 built in ISO burning software, Its a 64 bit copy (got from microsoft download website from my dads microsoft account).
It is enouth for the OS but it runs slowish on the mac mini (latest core 2 duo 2.4ghz model) The Idea was to have it backup my pc and laptop to a usb drive and act as a media centre pc (connected to av receaver and tv and on a gigabit network with a 2TB nas)
Since it looks like this may not work, whats the best way to make it into a media centure? mac osx? windows 7? plex? whats best and good?
I'd avoid USB like the plague. Why not use your PC instead? If I was going to use a Mini for WHS, I'd just use the Mini solely for Windows and not have OS X (you can boot OS X off an external drive anyway).

Locked Out of Windows Home Server 2011 - Removed Password

Hi All
I made a bit of a boo boo. This relates to Windows Home Server 2011. Basically I needed my server to boot directly to desktop and not go to a login screen. I thought I know I will just remove the password (bad decision).
It now goes to the login screen and it won't let me login with no password. It says something about not being allowed.
So I am now stuck at the Login screen. I don't really want to have to re-install the OS again, so any help would be great.
Cheers

Hello neilmjones,
mmm, there is something strange: if you was able to reset password to blank, then the System was set to permit blank passwords (System Policies), so you should be able to login too.
Are you sure you reset password to blank ?
Answering to your first question, once you resolve login issue, you can follow this
Microsoft Support article
How to turn on automatic logon in Windows (even if it isn't reccomended) or this other Blog post How
to Enable Auto-Logon for your Server.
Note: Please, write here new TechNet Forums post link you opened on Windows Home Server 2011.
Bye,
Luca
Disclaimer: This posting is provided AS IS with no warranties or guarantees, and confers no rights. Whenever you see a helpful reply, click on [Vote As Help] and click on [Mark As Answer] if a post answers your question.

Upgrade from Windows Home Server 2011

Even though Windows Server 2012 Essentials is being mentioned as a replacement for Windows Home Server 2011, there doesn't seem to be any documentation or mention of can you upgrade from Windows Home Server 2011 to Windows Server 2012 Essentials?
Will this work with the beta download and will we then be able to upgrade this version to the RC and/or release version?
As you may guess I have a Windows Home Server 2011 and am interested in looking at Windows Server 2012 Essentials to see what it offers me. The storage spaces sounds exactly what I want to replace the drive extender on the previous home server version. The
problem is that I don't mind sacrificing my present server box by installing the beta but it would be nice if it actually retained what settings it could via an upgrade option, which I could then have a chance of using with a proper release version.

Just clarifying about the 'upgrade path' and 32b vs 64b.
Yes, no in-place upgrade. However, one could theorise about some form of 'migration' being possible, where the list of users, the content of your shares, the current backups, would be 'moved' from old box to new.
I was in fact pretty sure no such process existed. (Wouldn't it be neat though? AND in future _at least theoretically_ possible, using processes similar to SBS AD migration.)
From this perspective putting the new box onto the network is similar to replacing WHSv1 with WHS11, in that nothing is carried over. No gain, but no lesser. Working on currently available information.
The later comment about the work laptop is, TTBOMK, a resounding 'NO'. When attempting to join a member of another AD the 'connect' process stated 'You must 1st remove the PC from the other AD'. I haven't tested this extensively but believe that PC's _capable_
of operating in an AD (Pro, vs Home, versions) will be made members of the WS12E AD. It is only PC's that do not have 'domain join' capability that are left in workgroup mode.
TTBOMK, AFAICS, so far, etc...

Home server

Similar Messages

Maybe you are looking for