Home share almost there, but need HELP!

I have one Win7 laptop and one XP laptop. Setup home share on each (share is setup on both computers, authorized both, same local net). XP laptop sees the other computer's share and when I click on it I see the songs/files just as expected. However, on the Win7 I can see share name of the XP computer but when I click on it, it does not show anything only acts like its loading then positions the cursor back on the music tab. nothing showing under the share.
Any ideas? I've turned off my virus protection (Security Essentials), rebooted, stopped and started the share, plugged directly into my router.....no change.
I was previsouly on version 9+ on both systems and it did not work and now I'm on the latest version of Itunes for both systems.
Help!

However, on the Win7 I can see share name of the XP computer but when I click on it, it does not show anything only acts like its loading then positions the cursor back on the music tab. nothing showing under the share.
Hmmmm. Experimental advice, but perhaps have a check through the following document. (In principle, a LSP issue might stuff up Home Sharing, although I've not met an example of it in the wild yet.)
Apple software on Windows: May see performance issues and blank iTunes Store

Similar Messages

Aggregated planning in SNP...almost there but need more guidance...

Gurus,
I am working on Aggregated SNP for our company.
1. I have created a Loc Prod hierarchy. The hierarchy has 1 real Location under a pseuso Location and has 6 real products under pseudo header product.It looks like the screenshot below.
2. I do not have a PPM hierarchy or a Resource hierarchy
3. I run the Location heuristic for the header AGG_MFIBER@ Location 1010. I get the correct Pl orders for the header product. The Source Determination is set to Only Sub level.
4. I am able to disaggregate the header values to the sub-products fine.
5. But when I look at the Planned orfders for the sub products I see that there is no source of supply even though I have the PPMs for them.
Do I need to create a PPM hierarchy and then disaggregate it for the system to get the lower level PPMs?
I will work on it next week but if I can get some help it will save me a great deal of time.
Thanks in advance,
Subash

Hi Cyrille,
How are you? It has been long....
This may end up in a long exchange....
1. I struggled for sometime before I was able to set up the LOC Hier and PROD Hier and generate the LOCPROD Hier, as my screenshots show.
2. I was able to run SNP for AGG_MFIBER and then disaggregate it to sub products. That is when I found the source of supply issue. I saw that the Header product did not have a SOS and created an SNP PPM manually. This is just after I posted the message.
3. After that I tried to create a SNP PPM Hierarchy. I was able to add AGG_MFIBER to level for header PPM. After that I added all the sub products in the above LOCPROD Hierarchy and was able to save the same. I went to the edge table /SAPAPO/RELDHPPM and saw 57 entries.
4. After that I ran SNP for AGG_MFIBER with Source Determination at 'Only Sublevel', the system created planned orders to cover the requirements but it still did not pick up the source of supply for AGG_MFIBER.
5. Then I changed the Source Determination from 'Only Sublevel' to 'Only Header level' and executed SNP. This time it put ONE planned order only for the header material in the second period but it did pick up the Source of Supply.
Still trying to understand the logic...
Any ideas here as I try to get further...
Thanks again,
Subash
Message was edited by: Subash Nanjangud
Cyrille,
After working thru the day on this issue I have been able to make things work...I will update the details tomorrow morning..
Thanks,
Subash

Can you use home share where there are 2 itunes on the same computer but under different user profiles?

Can you use 'Home Share' where there are 2 itunes on the same computer, but under different user profiles?

check out method one from this support article -> How to use multiple iPods, iPads, or iPhones with one computer

Bought a new macbook and want to manually manage music onto my iphone 4s but when i click 'manually manage' and then 'apply' i get the message saying it will erase everything already on there. Need help please!

Bought a new macbook and want to manually manage music onto my iphone 4s (as it is already full of music from old windows laptop) but when i click 'manually manage' and then 'apply' i get the message saying it will erase everything already on there. Need help please!

Before you sync your iPhone make sure that all the music that was synced to your phonereviously has been copied to your iTunes on the new MacBook Pro. Then when you connect your phone you will be able to either sync all music or select only those playlists that you want on the phone.

I am new to this but need help. Lion and iCloud have never worked on my desk top or MacBook Pro. Slow or Stop! Is there any way to fix the problem?

I am new to this but need help. Lion and iCloud have never worked on my desk top or MacBook Pro. Slow or Stop! Is there any way to fix the problem?

We need more information. I'm not sure what you mean by both Lion and iCloud have never worked.

TS3408 I keep on getting this error message on my Yahoo and Safari You're almost there, but your web browser doesn't support the newest version of Yahoo! Mail

I keep on getting this error message on my Yahoo and Safari all of a sudden;
You're almost there, but your web browser doesn’t support the newest version of Yahoo! Mail
The links it gives to upgrade don't work !
I have Safari Version 5.1.7 the latest for Snow Leapord. I get the same error message on Firefox and Google Crome aI even dowmloaded another Brower for Mac still got he same error message ! I have used the Disk Utility to rparir files and rest Safari. I have deleated Firefox then downloaded a fresh version, still the same error messages ! Please help it's driving me nutts.

Perky --
You do not need any "Cleaner" app for Macs. I would not be at all surprised if that didn't actually damage your Mac, especially if it were MacDefender. Applejack is OK, but I'm not sure what it erased. Do you know?
You also don't need any Virus Barrier. That could also mess things up.
The fact that all of your browsers are now messed up indicates that it is not a Safari problem, but more system-wide.
Did you check here?
http://help.yahoo.com/l/us/yahoo/mail/yahoomail/technical/

I keep on getting this error message on my Yahoo mail. You're almost there, but your web browser doesn't support the newest version of Yahoo! Mail

I keep on getting this error message on my Yahoo mail all of a sudden;
You're almost there, but your web browser doesn’t support the newest version of Yahoo! Mail
The links it gives to upgrade are blocked
I have latest version of FireFox 19 and Snow Leopard. I get the same error message on Safari and Google Crome aI even downloaded another Browser for Mac still got he same error message ! I have used the Disk Utility to repair files and rest Safari. I have deleted Firefox then downloaded a fresh version, still the same error messages ! Please help it's driving me nuts.

You can check for problems caused by a possibly corrupted user agent.
See:
*https://support.mozilla.org/kb/Finding+your+Firefox+version
*https://support.mozilla.org/kb/websites-say-firefox-outdated-or-incompatible
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

I am un able to send mail as it gets stuck in my outbox. I am sure the solution is simple but need help?

I am un able to send mail as it gets stuck in my outbox. This is a recent phenomena. I am sure the solution is simple but need help?

I looked everywhere for a solution - and I finally figured it out! Deleting my accounts didn't work, but here is what worked. This worked when my Gmail accounts were not sending properly. I'm not sure if it works for other e-mail services.
1. While in Mac Mail, click "Mail" in the top left corner of the screen
2. Click "Preferences"
3. Click "Accounts"
4. Select your account that isn't sending properly
5. In "Outgoing Mail Server (SMTP)" there will be two options - Gmail & Gmail (offline)
Make sure that "Gmail" is selected and NOT "Gmail (offline)"
If you navigate to another section in Preferences, it will ask you to SAVE - make sure you save your changes!
It worked for me, hope it works for you!

Hi there, I need help .. I have 2 gen ipod touch and I restore my ipod around 11:00 pm and now its 1:20 am and on my screen its the iTunes logo and the usb cord and when I plug my charger in my laptop .. iTunes comes up and this what it saids "iTunes has

hi there, I need help .. I have 2 gen ipod touch and I restore my ipod around 11:00 pm and now its 1:20 am and on my screen its the iTunes logo and the usb cord and when I plug my charger in my laptop .. iTunes comes up and this what it saids "iTunes has detected an ipod recovery mode. you must restore this ipod before it can be used with iTunes" so what do I do.. do I let my ipod died right out & then try it .. because I restore it ,... it was beening to slow... so please help me ?

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

HT201269 I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone I purchased 2 weeks ago when my Iphone was stolen. I don't know how to get the money or music on new phone?

Need help with Itunes transferrs and can I use my Edge phone as a router?

I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone
Is this an iPhone?
Set it up using the AppleID you used on the previous iPhone.

Today my iPod touch 4 generation was dropped. now it just has a white screen. i tried reseting it by clicking the home and lock buttons but nothing helped. what is my problem and how do i fix it?

Today my iPod touch 4 generation was dropped. now it just has a white screen. i tried reseting it by clicking the home and lock buttons but nothing helped. what is my problem and how do i fix it?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

You're almost there, but your web browser doesn't support the newest version of Yahoo! Mail

You're almost there, but your web browser doesn’t support the newest version of Yahoo! Mail
I have the latest Mozilla Firefox 19.0.2 but the newest version of Yahoo Mail don't work,what can' i do?

your useragent (the information the browser sends to websites to identify its version) go overwritten probably by some sort of toolbar/adware. please refer to this article in order to reset the user-agent settings in firefox: [[Websites say that Firefox is outdated or incompatible even though it's the latest version]]

Ok so I have a free standing iSight Cam, is it possible to use it with my white MacBook ? and if so how do I go about it ? I've tried researching for updates, drives but need help.

Ok so I have a free standing iSight Cam, is it possible to use it with my white MacBook ? and if so how do I go about it ? I've tried researching for updates, drives but need help. Can someone give me some direction ?

jpatricio787 wrote: ... is it possible to use it with my white MacBook ?...
OK so yes, but if, and only if:
(1) your MacBook has a Firewire port (not all do)
- and -
(2) your old external iSight camera works (not all do)
- and -
(3) your MacBook is working properly.
If you are not certain whether your MacBook model has Firewire, you can search MacBook Technical Specifications for your model. Alternatively, check the User Guide Manual that came with your MacBook for the information you need to be certain.
If you are not certain that your old external iSight camera works, you can test it using the suggestions in this link.
jpatricio787 wrote: ... if so how do I go about it ? ...
Follow the instructions in your iSight User's Guide to connect and turn on the iSight. Then launch the Apple app you want to use with your iSight. If you need more information about using an app, search for "camera" (without the quote marks) in the Help menu choice for the app.
jpatricio787 wrote:... Can someone give me some direction ?
If you need more direction, post back the specifics of what you still need. We will offer further direction based on the details of your reply.
Message was edited by: EZ Jim
Mac OSX 10.9.3

Purchasing MBA but need help on upgrades.

Hello, I am purchasing an MBA, but need help on upgrades based on the following; I will be attending medical school in the fall, I take a wide range of photos of my family on my iPhone that I play with on certain apps and do store them in the cloud and computer, I have a medium iTunes libaray but will get bigger with the additional apps for school, I am a moderate gamer (I play games online as well as my kids do, but nothing that will take up a ton of space when downloaded like Assassins Creed) and I plan on running MS Office. I've already decided to upgrade to the 8GB but I can't decide if I should upgrade to the 512GB Flash or stay with the 256GB and upgrade from the i5 to i7 or stick with it. I don't plan on buying another until I graduate. I am new to the Mac World outside of the use of my iPhone which convience me to convert from my awful PC. Can you MBA experts relay some advice on a good route. I appreciate it, Thanks

My rule of thumb is to buy the largest drive storage available. Especially since the Air models can't be upgraded to a larger size in the future. I also like to buy the most amount of RAM offer and as with the storage space on the Air models can't be upgraded once purchased. So Bite the Bullet and spend the money to get both the most RAM and the largest storage offered as neither can be increased later on. Also I suggest you spend the extra money on the Applecare extended warranty because to fix any Mac once the standard warranty is over is very expensive. You have until the one year standard warranty runs out to buy the Applecare extended warranty.

All of my photos are displayed as BW because somehow I've saved a quick develop preset and it saves as BW. This is for all of my photos. I can individually undo them but need help in how to get rid of the preset so it goes to Default. thanks

All of my photos are displayed as BW because somehow I've saved a quick develop preset and it saves as BW. This is for all of my photos. I can individually undo them but need help in how to get rid of the preset so all photos goes to Default or as shot. thanks

Go to the develop module and highlight all of the images in the filmstrip at the bottom of the screen. Then activate Auto-sync and click on the Reset button. That should reset all of the images to your camera default settings.

Home share almost there, but need HELP!

Similar Messages

Maybe you are looking for