Home sharing and air play not working with 11.1.1.11

I upgraded to recent i Tunes and now I cannot access Airplay or Home Sharing
help

Hi there neztrop,
You may find the troubleshooting steps in the articles below helpful.
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
-Griff W.

Similar Messages

To Apple engineers: Home sharing and wifi sync not working after fresh install

Have been using wifi sync and home sharing on my Macbook 5,1 since its early debut.
Since Macbook 5,1 is old i am using it to stream MP4 files to my Apple TV.
The functionality has been working fine throughout the OSX iterations; then came Mavericks.
Now my iTunes library will not sync with Apple TV3, nor will my iPhone 5/iPad 3 wirelessly sync with my iTunes library.
For some reason since upgrading to Mavericks the thing wont work under normal boot.
Restarting in Safe mode solves the problem. Assuming it was some erroneous configuration i went through troubleshooting steps to try and resolve it.
First i uninstalled any third party apps.
Then i repaired, went through Maintenance and Cleaning of the system using Onyx
Then i tried manually removing third party boot kexts from the System Library and user Library
Then i tried reinstalling OSX via the recovery partition (cmd+r on boot time)
Finally i tried a full system erase and reinstall via an external bootable Mavericks USB.
After all these steps the problem persists.
There should be no hardware failure since it works fine in Safe mode and doing a clean install verifies that there are no third party conflicts with the system since iTunes was executed immediately after booting up for the first time.
This raises the concern that there seems to be some sort of system kext misconfiguration by the Apple engineers.
When executing iTunes the following errors are being displayed in the system log (via Console):
22/07/14 20:09:41,949 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 1
22/07/14 20:09:41,954 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 2
22/07/14 20:09:41,958 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 3
22/07/14 20:09:41,962 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 4
22/07/14 20:09:41,966 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 6
22/07/14 20:09:41,970 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 7
22/07/14 20:09:41,974 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 8
22/07/14 20:09:41,978 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 9
22/07/14 20:09:41,982 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 10
22/07/14 20:09:41,987 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 11
22/07/14 20:09:41,991 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 12
22/07/14 20:09:41,995 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 13
22/07/14 20:09:41,999 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 14
22/07/14 20:09:42,004 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 15
22/07/14 20:09:42,008 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 16
22/07/14 20:09:42,012 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 17
22/07/14 20:09:42,016 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 18
22/07/14 20:09:42,020 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 19
22/07/14 20:09:42,024 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 20
22/07/14 20:09:42,028 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 21
22/07/14 20:09:42,032 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 22
22/07/14 20:09:42,036 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 23
22/07/14 20:09:42,041 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 24
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91A980CD60 Christophoross-MacBook.local. (AAAA) that's already in the list
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91A980D1F0 2.0.6.6.4.5.E.F.F.F.2.1.3.2.2.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91AA016F60 Christophoross-MacBook.local. (Addr) that's already in the list
22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91AA0173F0 5.1.168.192.in-addr.arpa. (PTR) that's already in the list
22/07/14 20:09:43,088 com.apple.usbmuxd[42]: LOCKDOWN_V2_BONJOUR_SERVICE_NAME is _apple-mobdev2._tcp,921707f2
22/07/14 20:09:43,140 xpcd[196]: restored permissions (100600 -> 100700) on /Users/christophoros/Library/Containers/com.apple.MediaLibraryService/Container.plist
22/07/14 20:09:43,466 com.apple.SecurityServer[14]: Session 100020 created
I hope someone came across a similar issue and has some light to shed on the matter.
This has been ongoing since Mavericks came out.
Thanks for reading through

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own"

Home share and air play dropping connection on all apple devices !!!

Why is home sharing and air play dropping my connection on AP 1 and AP 2 since the update? This is ridiculous to not be fixed yet or put in place before Lion release

I've been using Home Sharing since it came out. But last night after I had rented a TV show on my iMac Home sharing just wouldn't work from my AppleTV2.
I could see my Mac, select the TV show, but it wouldn't play. Network connectivity was fine. Then I went to my Mac and tried to stop and start HS. It wouldn't authenticate.
Was there a problem on Apple's end?
This morning it appears working? Is yours working now...

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with my apple ID. Please Help me I speak Spanish so if my English is not ok I´m sorry about it.
Do you think that apple has to reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s??

I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more. I am not always somewhere I can charge my phone.
Your points are true; however it doesn't help me......

HT4972 2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store. Is there any way to find out which apps will work with 2nd generat

2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store? Is there a way to find out if the App will work before you download?

Look to the app developer to provide that information when browsing the iTunes Store.
The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
If you aren't happy then sell it and buy a new one.

Savevid and keepvid are not working with os 10.7.3-Is there a fix?

savevid and keepvid are not working with os 10.7.3-Is there a fix?
Is anyone else having this problem?

A massive thanks from me too after discovering the problem when I started work this morning at 2.30am - not something you need that time of day! Did exactly as written and bingo, missing tool icons appeared BUT, and there's always a but...
I have THE SAME problem in Quark with some of the static areas in the measurement (F9) bar. Can anyone suggest what might fix this? I have restarted just ONCE after turning on Extension Manager at start-up.
Hardware:
Apple Macintosh MacPro 2x2GHz Dual-Core Intel Xeon
RAM: 6Gb (667MHz DDR2 FB-DIMM)
HDD's (internal): 1x160Gb / 1x500Gb / 2x1500Gb
Software (OS)
OS: Mac OS 10.7.3 (updated to this 06.02.2012)
Problem software: QuarkXPress 8.5
Thanks in advance for any advice / help...
Paul

I started to download Maverick but then read that Word and Excel do not work with Maverick. I hit pause on the download. How do I stop the download. In non technical terms please!

How do I stop the download of Maverick on my MacBookPro? I started downloading then discovered that 2008 Word and Excel do not work with Maverick. I have too many files in the 2008 version to upgrade them at this time. I just need instructions in non technical terms to stop the Maverick download.

I did the same as Tapmr and have paused the "upgrade". So am I to understand that the upgrade only downloads and will not automatically install it? I am an extreme novice here, and cannot afford any issues after I upgrade/download. I don't know how to make a clone copy as you suggested either.
I need assurance that if the upgrade is allowed to continue that I will be able to delete the upgrade downloaded and continue on as before with my regular system.

PSE13 trial version and it will not work with Windows 7

I have downloaded PSE13 trial version and it will not work with Windows 7

I have been using PSE 13 for 3 months with no problems. When I launch the Editor in PSE 13 this is what I get -
"Adobe Photoshop cannot run on this computer because this version of Photoshop requires Windows 7 or later"
RAM 12.0GB
64 bit operating system
Intel(R) Core(TM)I7CPU 920 @ 2.67GHz
Windows 7 SP1
Hope this helps.
Lynne

HT204291 Enlarging photos with air play not working

I am trying to enlarge my photo by pinching and it does not work.
I have mirroring turned on
What can I do?

Hello there, kgreasko.
The following Knowledge Base article offers up some great steps for troubleshooting Airplay Mirroring:
About AirPlay Mirroring in OS X
http://support.apple.com/kb/HT5404
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Home Sharing in iTunes no longer working with Lion....

Anyone else having this problem?? I have not seen it as a topic.
We have 2007 iMacs so chips do not support Air Drop. However, I would not think Air Drop would be required for home sharing in iTunes.
Moving to Lion has not been a very good experience for me so far with peripherals, but to lose home sharing in iTunes on top of it... I don't even want to finish this sentence.

I just discovered that after the iTunes update and the Lion update, my iTunes wouldn't update anything except what was in the library already. New songs, apps, movies all equaled bupkiss. I went into advanced settings and saw that my library location was blank. I'm using an external drive for my music. So there's a bug, since it would play everything thing in the library but was unsure where the library was so that it could write to it. I just relocated my media drive and now sharing and updating the library works fine.

How can I get multiple users to be able to share the music on iTunes? I've tried Home Sharing, but it does not work properly.

How can I get home sharing to work on my mac mini for multiple users? It says it is working, but it never shows up in the left hand column.

Gino Cerullo,
Thanks for your response. I tried all that myself. In fact, last night, it all worked fine on all users. This morning, no Home Sharing would show up. It is really weird because some setting must have changed, but I did not knowingly changed anything, and now all the obvious fixes don't work. In fact, if I turn off Home Sharing and turn it back on, then it comes up only until I hit the "done" button on the set up page and then it goes away from the left hand column again. The ADVANCED drop down tab says it is on, but it is not there.
Thanks anyway.
Edzell

Ios 7 air drop not working with mountain lion air drop

Hi, didn't see an iOS 7 forum, so I'm posting it here since I was testing it out on my iPhone 5.
I tried to use air drop to share photos b/w my iPhone and my MBP running mountain lion, both has air drop enabled, but I couldn't see either on the air drop window.
is iOS 7 air drop not compatible with OSX air drop??
bluetooth and wifi are on for both machines.
thanks

I have a Logitech Ultrathin Keyboard Folio i5. Also, even before reading your suggestions, I moved my phone hand set away from the iPad. There aren't any other sources within 10 feet although the phone base is within 30 feet. The WiFi router is about 5 feet away. Haven't had a chance to "troubleshoot" the connection.
Have you any suggestions for Air Drop or Air Print? My Pixma MP 450 which in excellent working order isn't compatable with either OS 10.9.x or iOS 7.
Canon suggested a Pixma MG 3520 which was hellatious to set up, requiring a big download and both a USB cable and Ethernet connection to the router, and isn't working with the iPad.
Clearly, technological "advancements" are for teeny boppers who spend their time taking phone pictures, sending mindless messages and listening to music. Oh, to be 14 again.
Sorry about the bitters. Rare opportunity to vent to adults.

Canon Pixma MP-540 (and other) does not work with Cups 1.4

Since Cups 1.4 my printer does not work
its 100% about Cups 1.4 beceause after an downgrade to 1.3 it worked perfect. After upgrade to 1.4 again nothing worked.
So my question, could there be maybe a package called cups-legacy. I heard about other Canon printers + non canon printers which not work with Cups 1.4 in case of binary distributed drivers

I had a similar problem with my MP780 and solved it by adding a custom udev rule. See http://wiki.archlinux.org/index.php/Cup … ermissions. This is my udev rule:
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="04a9", ATTR{idProduct}=="1707", GROUP:="lp", MODE:="0660"
and lsusb output:
Bus 001 Device 003: ID 04a9:1707 Canon, Inc. PIXMA MP780 Scanner
. Hopefully this will be fixed by hal/devicekit/udev upstream but it all seems a bit of a jumble atm, to me anyway.

Crystal report 8.5 export to csv and rtf format not working with office 2013

Hi Experts,
Crystal report version 8.5 hangs and eventually crash when i export my report to csv or rtf format on windows 7 with office 2013 installed, code is written in VB 6 although the same scenario is working with office 2010 installed.
i debugged the code and found the application hangs at function Report.Export(False).
below is the code snippet
       .PDFExportAllPages = True 'ePDFExportAllPages
       .PDFFirstPageNumber = ePDFFirstPageNumber
       .PDFLastPageNumber = ePDFLastPageNumber
       .RTFExportAllPages = True 'eRTFExportAllPages
       .RTFFirstPageNumber = eRTFFirstPageNumber
       .RTFLastPageNumber = eRTFLastPageNumber
       .UseReportDateFormat = eUseReportDateFormat
       .UseReportNumberFormat = eUseReportNumberFormat
       .UseReportNumberFormat = eUseReportNumberFormat
       .XMLAllowMultipleFiles = eXMLAllowMultipleFiles
       .XMLFileName = eXMLFileName
     Report.Export (False) ----Application hangs here and eventually crash
Looking forward for your help, as it is very urgent
Regards
Mohit

Hi Mohit
CR 8.5, being about 15 years old, does not support Windows 7. I am surprised this works for you with MS Office 2010 and to be honest, I'd consider my self lucky there. The fact that is does not work with office 2013... well, like I said, lucky with Office 2010 and your luck ran out with Office 2013.
Your option; rewrite the app in VS 2010 / 2012 / 2013 and use the CR Assemblies for VS .NET from SAP Crystal Reports, Developer Version for Visual Studio .NET. The CR Java SDK would be another option.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

HT4352 I have followed all the instructions on home sharing and it used to work perfectly. With the new apple OS upgrade my apple TV now longer sees anything, even though I I applied all home sharing settings again. Anyone know how to fix this?

I am trying to get home sharing to work on the applie tv and its not working after a Mac OS update. It has not worked for about a month and use to work fine. Has anyone else experienced this problem. Is Apple working on a fix for the problem? Is there a work around?
Thanks,
Anthony

A frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is the service being blocked on the network. Make sure your network isn't hidden, has a unique name, that MAC address authentication is disabled, security is set to use WPA 2 Personal and that there is only one router/device acting as a DHCP server and providing NAT services.
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
53
TCP/UDP
DNS
DNS
80
TCP
HTTP
AirPlay, iTunes Store
123
TCP/UDP
NTP
Network Time
443
TCP
HTTPS
AirPlay, PhotoStream, iTunes Store
554
TCP/UDP
RTSP
AirPlay
1900
UDP
SSDP
Bonjour
3689
TCP
DAAP
iTunes, AirPlay, HomeSharing
5297
TCP
Bonjour
5298
TCP/UDP
Bonjour
5350
UDP
NAT
Bonjour
5351
UDP
NAT
Bonjour
5353
TCP/UDP
MDNS
Bonjour, AirPlay, HomeSharing
8000-8999
TCP
iTunes Radio Streams
42000-42999
TCP
iTunes Radio Streams
49159
UDP
MDNS (Win)
Bonjour, AirPlay
49163
UDP
MDNS (Win)
Bonjour, AirPlay
Refer to your router manual/manufacturer for any settings that are specific to that model.
Another frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is security software, in many cases configuring it correctly, disabling it or even uninstalling it can help, but in some cases the security software can cause problems that simply reconfiguring, disabling or uninstalling cannot reverse.
If you are consistently unable to activate AirPlay, have tried all the steps in this article and have security software installed on your system, you might benefit from contacting its provider or participating in any online forums they run to discuss the matter with them.

Home sharing and air play not working with 11.1.1.11

Similar Messages

Maybe you are looking for