Home sharing iMac and MacBook Pro: not all songs are playable

Hello
I set up Home Sharing between my iMac and MacBook Pro so that I could stream the music that's on the iMac to the MacBook Pro. On the MBP there are no songs, all of them are in Apple Lossless format on my iMac. I first tried to use "‘share my library on my local network" but because I wanted the play count to go up as well I chose for "Home Sharing". Setting up was simple. After all preferences were adjusted, I opened iTunes on the MBP and it immediately found the shared iMac library. There's now only one problem: not all songs are playable. Some don't even start. How is this possible and what do I need to do to resolve this?
FYI: the iMac is connected via ethernet to my cable modem which sends a wireless Wi-Fi signal to the MBP. Signal quality is excellent.
Also, is it possible that playcount is only available with Home Sharing and not with "share my library on my local network"?
Thanks!

It very well could be the antivirus app, most are intrusive and debilitate rather than enhance performance and should be removed using the developers instructions. You haven't really told us anything useful such as any settting you may have changed. However if you began working backwards resetting any changes and uninstalling the apps added since the performance issue started then you probably will find your issue. 

Similar Messages

  • Can some one help me reinstall my MP640 software on my Imac and macbook pro? as the software does not recognise os 10.7.5

    My Imac and macbook pro stopped accessing my MP640 via the home wifi set up, so I sent all the canon software to the trash on both computers, thinking I should reinstall the software I got with the printer, but the software does not recognise os 10.7.5. I am using a netgear modem. I also use time machine to back up to time capsule.

    Your Canon Pixma MP640 driver:
    http://support.apple.com/kb/DL899

  • I have 2 IMacs and MacBook Pro- can not work on FCP simultaneously when my network ports are on (open). How do I go about changing this?

    Hi!
    I have 2 IMacs and MacBook Pro and can not work simultaneously on FCP on all workstations when the network port is open. Can anyone help me on this?

    Did you purchase Final Cut Pro from the Mac app store? Or install it from disk? If from disk, you may have installed it on all machines using the same serial number, and using all of them simultaneously violates the license agreement. If you purchase from the App store the licensing is different and that may not apply.

  • WD My Passport 1TB USB external drive randomly ejects from my iMac and MacBook Pro.  I have tried two separate USB cords.  I have updated the firmware.  I have tried it on my MacBook, two different Macbook Pro's, and my iMac.  All give the

    WD My Passport 1TB USB external drive randomly ejects from my iMac and MacBook Pro.
    The drive is approximately 4 years old.  When the drive is plugged in, I can see the data.  It appears to be working properly.  The only problem is that everyone of my Apple Machines are ejecting it.   Several years ago, this drive connected to Mac machines with no problems.   I have tried two separate USB cords.  I have updated the firmware.  I have tried it on my MacBook, two different Macbook Pro's, and my iMac.  
    All give the same result of random ejection of the drive and the error message of:
    Disk Not Ejected Properly
    Eject "1TB Passport HD" before disconnecting or turning......
    Searching through the web, it seems this is an common/known problem.   Does anyone know the solution?
    Thanks,

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • IPhoto not working after trying to share iPhoto between iMac and MacBook Pro

    I tried to share my photos on both my iMac and MacBook pro. It deleted all my photos in my MacBook and now it won't let me even open iPhoto in my iMac and gives me the following message "You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto."
    How do I rectify this? Purchase iPhoto from the App store?

    What version of iPhoto do you have on each system?
    It sound like you propbably have a newer version of iPhoto on the MBP - and thay you opened the iMac iPhoto library using the newer iPhoto - if you did you were warned that doing this would convert the library and that the older version of iPhoto could no longer open the library - the error message you list says that this is what you did
    If you did the only options are to restore your iMac backup from before you converted the library, upgrade iPhoto on the iMac the same version you have on your MBP purchasing from the App store or use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -  to downgrade your library
    LN

  • HT5268 Just purchased Imac and Macbook pro and upgrades to Mountain Lion. Java will not run with one important site where my Grandson is in Kindergarten out of state with in room camera. What to do. This is very disappointing and non of apple geniuses kno

    My new IMac and Macbook Pro are each loaded with Mountain Lion. Have Office for Mac also
    When I try to see my Grandson on webcam out of state the login will not activate. For PC use I needed Java and Active X to let it run. My Java is checked as ready to go but nothing happens. Otherwise these are great computers. Please help me through the process. The Geniuses at my apple store can't understand what to do.
    [email protected] or [email protected]

    By default, OS X does NOT come with Java installed nowadays. You need to open the Java Preferences app found in Utilities; when you do that the first time, it will inform you of the fact and offer to install the product for you.
    Afterwards, due to a major security issue we had back in the first quarter of the year, the plugin is disabled by default. You need to revisit the Preferences and enable manually. It will auto-disable if unused in awhile.
    Lastly, you may have to adjust which Java instance is being used, the 32-bit or the 64-bit. Default is 64-bit, but some applets crash & burn or outright refuse to run in such a platform. You can prioritize which version you prefer by dragging on top in the Preferences.

  • AirDrop used to work between my iMac and MacBook Pro. Now, when I try to transfer a file (either direction) I get a message that my certificate is invalid or that the file has not been accepted. What do I do?

    AirDrop used to work between my iMac and MacBook Pro. Now, when I try to transfer a file (either direction) I get a message that my certificate is invalid or that the file has not been accepted. What do I dot correct this?

    Message was edited by: leroydouglas
    better yet, try this solution:
    https://discussions.apple.com/message/12351186#12351186

  • Airport extreme loses internet connection all the time with imac and macbook pro

    I keep losing the internet connection with airport extreme on my imac and macbook pro but NOT with my pc

    Ok, so when you say you lose internet connection, is it disconnecting from your wireless network so there are no bars?
    And are there usually full bars?

  • Home sharing problem between macbook pro and win7 pc

    I tried to enable home sharing between my macbook pro and my windows 7 desktop to copy songs (mac --> pc and vice versa). I can share my mbp itunes library to my pc, but i can't do it the other way. i tried troubleshooting, from turning home sharing on and off on both computers, to restarting my router, but still to no avail. i want to copy songs from my pc to my mac this time as i've purchased some songs on the pc and want to sync them with my mac. please help me on this.

    Welcome to the Apple Community.  
    The following article(s) may help you.
    Troubleshooting Home Sharing
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings

  • I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    Irelandbound wrote:
    thank you, I have the adaptors so glad that would work.  I just heard adaptors burn out often.  So Just thought for my main iMac computer, a plug would be best.  I will get one once I move.
    Any other suggestions or things I should know about apple products in Ireland.  I know there are no Apple stores there.
    An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
    I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
    You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
    Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
    Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
    If you have something that doesn't have that input power spec, it would require a transformer.
    On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out.

  • Imac and Macbook pro can no longer see one another

    I'm not sure why, but all since I upgraded to Yosemite, I can no longer see my iMac on my Macbook Pro and vice versa. I could always see the computer that I needed to connect to in finder, or I could connect with my iCloud password. As of today, I can no longer access my iMac from my Macbook Pro and that's a problem. If someone could provide directions (dumbed down version) explaining how to connect the computers from scratch, I would greatly appreciate it. I am fine with setting it up again but I can't recall how I did it.  Thanks so  much. I did upgrade both my iMac and MacBook pro to Yosemite over the weekend.
    Model Name: iMac
      Model Identifier: iMac11,3
      Processor Name: Intel Core i3
      Processor Speed: 3.2 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache (per Core): 256 KB
      L3 Cache: 4 MB
      Memory: 4 G
      SMC Version (system): 1.59f2
    Model Name: iMac
      Model Identifier: iMac11,3
      Processor Name: Intel Core i3
      Processor Speed: 3.2 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache (per Core): 256 KB
      L3 Cache: 4 MB
      Memory: 4 GB
      SMC Version (system): 1.59f2

    Ensure Sharing preferences are set correctly for both devices.

  • What's the best way to share my Aperture and FCPX projects between an iMac and MacBook Pro?

    Greetings,
    I own both an iMac and MacBook Pro and I'm interested in figuring out the best way to have access to my iTunes, Aperture and Final Cut Pro X files not only when I'm at home using the iMac, but when I'm out and about with the MBP.
    I'm sure there are others among us who require a similar setup so I was hoping you guys could share with me how you solved this little problem, and also inform me of any potential negatives for your method so that I'm well prepared. Thanks.

    Best is a subjective term, as it will ultimately come down to preference. The fastest however, would be to wait until they market has a few thunderbolt drives available for purchase...
    But like the first poster stated, a firewire 800 drive, would be the more convenient choice for now. Or you could set the shared folder on your iMac to be avaible on your network and use it to allow your MBP to access it wirelessly.
    Obviously whatever you change, just save it back to the same folder on the iMac. Keep in mind it will not be as fast as the first suggestion (unless it is a wired network), but may be usefull for smaller files.
    However, you should have everthing backed up via an external drive, that is always useful...

  • Files disappearing iMac and MacBook Pro with iCloud

    Just converted to Apple one month ago buying iMac and MacBook Pro.
    iMac at office, MacBook at home.
    My documents are mostly texts with Microsoft Word and numbers with Microsoft Excel.
    I am using the new beta preview Word and Excel.
    I copied everything (15 Go) to iCloud.
    Not only the files don't synchronize between computers, they disappear.

    You'll have to give yourself permission to the files. Do a +Get Info+ via the Finder, click the padlock at the lower right, and enter your Admin password.
    Then click the plus sign at the bottom, and select your user account. That will give you Read rights. Click the arrows in front of +Read Only+ and select +Read & Write.+
    If they're all in a folder, do this on the folder, then click the "gear" icon and select +Apply to enclosed items.+ That may take a while if there are a lot of files.

  • My iMac and MacBook Pro have stopped being able to find one another.

    I have been sharing files between my iMac and MacBook Pro.  Recently they have stopped being able to detect one another.  When I look in the sidebar of the Finder window, neither computer shows the other.  I have file sharing enabled for both computers.  This is a recent problem, and I'm not sure what has changed.  I may have updated software - but don't remember what or when, as I tend to automatically do so when an update becomes available.  I would appreciate any help that you can give.
    Thanks,
    Linda

    Eric,
    Thank you.  I had all my settings right - I had checked and double checked.  The one thing I had failed to do - which is the one thing that often helps - is to shut everything down and restart.  I shut the router and the computers down and restarted them one at a time.  They are once more talking to each other.
    Thank you again,
    Linda

  • IMac and Macbook Pro no longer connecting to the Wifi?

    Hi there,
    I've been in London this weekend, only to return home to find issues connecting to my wifi. Weirdly, it's only the iMac and Macbook Pro having trouble, everything else is connecting fine e.g iPad, Phone, Android Tablet etc.
    I'm getting disconnected around every 20 seconds and cannot figure it out! It's so frustrating as I'm wondering if there's been an update released for OS X that it has downloaded recently? Especially seeing that when I run windows from bootcamp on my iMac, it doesn't disconnect. And I also don't believe it's an issue with the hub.
    Has anyone got any suggestions? I've tried removing the network and re-adding, help for about an hour but still not much use.
    Thanks, Matt

    Wi-FI connection drops
    Wi-Fi Problems in OS X Yosemite
    Wi-Fi Problems in OS X Yosemite (2)
    Wi-Fi Problems in OS X Yosemite (3)
    Wireless Diagnostics
    Also try turning off Bluetooth.

Maybe you are looking for

  • How can i delete my old apple id account?

    please someone can tell me,how delete my old apple id account?

  • XDO Log shows - java.io.UTFDataFormatException: Invalid UTF8 encoding

    We have a XDO Region in our OA Page - that calls XML Publisher Report taking as input a XML File generated from a concurrent program. The concurrent program calls a PL/SQL Program to generate the XML File. The XML File has the encoding fetched from s

  • Error id: 10000

    So I bought a new Playbook a week or so ago. I'm trying to purchase applications on the AppWorld but when I try to download something, I get an error ID 10000.  Reading around, some people suggested the following: - Hard Reboot - Security wipe and re

  • Affecting Flash from HTML

    Hello, I'm trying to affect my flash movie from HTML. For example, if I have a google adsense module, and I want to trigger something in flash each time that link is hit, how would I go about doing that? Any help would be much appreciated!

  • Why is the font garbled in my keynote presentation?

    I saved a keynote presentation yesterday (notebook theme) and all was fine; this morning, though, the font (Bradley Hand ITC) is spaced wrongly, as if it's typed over itself... Weird. I can change the font as a workaround, but I'd prefer not to have