Home sharing now not working with Apple TV 6.0.1/ iTunes 11.1.3.8

It was stupid of me to accept my Apple TV's notice of a new upgrade, which I accepted, and it is now version 6.0.1.  I upgraded my iTunes to 11.1.3.8.  Now my Apple TV doesn't recognize my Home Sharing with my computer.  I've reset the Apple TV to download the latest software again, and still nothing.  Before the update everything was fine.  This is not some Windows 8/firewall/network issue.  This is an Apple TV/iTunes/Home Share issue.  I have restarted Home Sharing multiple times in iTunes with my account without any success.  Please help.  Thanks.
Mark

Hi guys! I have just found a solution in a different thread - huge thanks to Toploader21120:
1) open control panel.
2)Choose Network and internet
3)Select the VIEW NETWORK STATUS TASKS under NETWORK and SHARING CENTER section
4) Choose the active network connection. It is usually name " wireless Network Connection 1" or something similiar.
5) Click the properties button
6) If the Internet PROTOCOL VERSION 6(TCP/IPv6) is checked, uncheck it, then click OK.
7) Click CLOSE
8) Restart iTunes and try to use the Home Sharing feature again.

Similar Messages

  • Home sharing does not work with apple tv

    Can anyone help me.  I used to be able to stream all content from my home master computer to my Apply TV.  Now it suddenly does not work.
    Apple TV itself works just fine.  I can also airplay using it with out IPADs.
    I have uninstalled and reinstalled Itunes.  Reset the modem/router.  Reset Appletv.  Tried with Norton disabled.  etc.
    Nothing seems to work. 
    I keep getting the 'Turn on your home sharing in Itunes' message.   But it is on.
    Help is appreciated.

    Welcome to the Apple Community.
    Sometimes just disabling Norton isn't enough, you may need to hunt down every last file it has written to your computer then re-install iTunes. I understand Norton can be quite a nasty little intrusion.
    I know very little about PC's or security software as I have neither, but the following article might help you.
    Troubleshooting Security Software

  • Home sharing does not work with new mountain lion update.

    home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

    Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
    If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
    My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

  • My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

    My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

    My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

  • Home sharing is not working in apple tv after upgrading apple tv to 4.2.2.  I've had apple tv working just fine for some time now and after upgrading, it stop working and prompts me in Apple tv to turn on home sharing in Itunes.  It's on.

    It asks me, in apple tv when I go to my "Library" to turn on home sharing.  It's on.  When I turn it off and back on I can access my itunes stuff fine for a day or two and then it doesn't work again.  I've tried unplugging appletv, reboot the router (att uverse), and then plug in apple tv again and it doesn't help.  it's still give me the message.  the only thing that works, temporarily, is to turn off home sharing and turn it back on.
    I'm using itunes version 10.5.0 on windows 7.  can someone help me with this?   I can't run up and down the stairs all the time.  I have bad knees and other conditions that stop me from doing that.  Please help.
    Thanks.
    Jim.

    Hey all,
    I've been having similar problems so I put a packet analyzer on the network to see what's really happening. (Apologies in advance if this post is too techno-babbly...)
    Some background:
    How do Apple devices find each other over the network?
    iTunes with home shaing turned on sends out a message to a special IP address called a multicast (224.0.0.251, in this case.) All your Apple devices listen to this multicast address and respond over that same address. This process applies to iTunes, AppleTV and Apple Remote at least (those are the things I've been testing with.)
    How do Apple devices communicate with each other once they're found?
    Once they find each other, they establish a Transmission Control Protocol (TCP) communication session. This connection is only between two devices. In this case, iTunes and AppleTV or Apple Remote and AppleTV. The TCP session is how data gets transferred between devices.
    The problem:
    I captured the protocol traffic between my PC and AppleTV first with the firewall software turned off. In my case, I use Norton 360. What I see is iTunes and AppleTV communicating over the multicast address every 100 seconds. My iTunes usually 'disappears' from AppleTV and the Apple Remotes within about 5 minutes so I left the firewall off for half an hour and everything worked fine. I turned the firewall software back on and then restarted everything. iTunes then did the device discovery and all the devices found each other. Then, after a period of about five minutes of inactivity, the multicast discovery protocol stopped being sent by my PC. Why? I really don't know. From watching the apple protocol's timing, contents and behavior, I see nothing wrong with the implementation. I've done troubleshooting on other location-based multicast protocols for work and have seen some dumb things but Apple's protocol is done correctly and behaves exactly as I would expect.
    The solution:
    I put a rule into my firewall software explicitly allowing the multicast IP address and also the local subnet that my devices use. I then moved the new firewall rules to the top of the list to ensure that they will be 'hit' before any of the other rules in the list. After that, I left the firewall on and tested for a while then left everything idle for an hour. When I came back, everything still worked. I would suggest that replacing your firewall software won't necessarily help you here. You just need to make sure that the rules for the Apple stuff are put in manually and are at the very top so that another deny rule in the list doesn't trigger before the new permit rules. Hopefully it goes without saying but doing the above leaves your PC completely wide open on the local network so, if you use wireless, please be sure to use encryption on it.
    Hope that helps...

  • Airplay and home sharing does not work with my 2nd gen apple tv

    though my 2nd gen apple tv with version 7 and my iphone 4s with ios 8.0.2 are connected to the same wifi network, airplay and home sharing doesnt show up in my itunes nor in my phone! what should i do?

    Hello there, Ashwin.
    The following Knowledge Base articles offers up some great steps for troubleshooting issues with both AirPlay and Home Sharing, respectively:
    Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
    http://support.apple.com/kb/ts4215
    and
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Home Sharing will not work with my Windows 8 64bit with new itunes.  All of my Apple TVs will not see my library and my iphones will not function with the "Remote" App.  They all did before.  Only thing that has changed is new PC/itunes.  Any Ideas?

    Installed a new Windows PC on my home network.  PC is Windows 8/64bit. with latest version of itunes 11.1.4.62 for 64bit.  My itunes works, but I can not get Home Sharing to function now.  None of my Apple TV's can see my computer library and prompt me to turn it on.  All of my iphones, pods, pad, can not use the "Remote" app.  When you prompt your phone in Remote App to "add library" and you get the code....iTunes doesnt give you the remote screen where you can enter the code.  I have reloaded iTunes, reset my router, updated all devices.  You can turn on "Home Sharing" on iTunes, but then it closes and doesnt seem to link my devices like it use to.  Also, when the new version of iTunes is up on my PC, you can see the other devices to AirPlay to like you could before.  However, I can send items from my iphone to stream to an Apple TV, I just cant link them all like I could before and control the music playing to multiple Apple TV.  Growing fustrated.  Any ideas, would be helpful.

    Cunning1_
    You are a legend!!  I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!!  I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!!  Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
    Whatever - one step and now I can enjoy my music through my house again!
    Thank you, Thank you, Thank you 

  • Home sharing does not work with iTunes 12

    I have been using home sharing with iTunes a lot, mainly to stream TV shows from my Mac Pro (2008) to my Apple TV (3rd Gen). But after installing Yosemite and iTunes 12 it doesn't work any longer. My Apple TV finds the iTunes Library, but can't connect with it. At the same time home sharing worked just fine with my iPhone 5 and iPad 2 (iOS 8.0.2). After installing iOS 8.1 home sharing with my iOS devices doesn't work, too – same problem as with Apple TV: iTunes library is found but devices can't connect with it.
    I already tried to solve the problem with the suggestions on Apples troubleshooting page:  Fehlerbehebungsmaßnahmen für die Privatfreigabe
    My setup:
    Mac Pro (2008) with OS X 10.10 (14A389), iTunes 12.0.1.26, connected via Ethernet and WiFi
    Router: Fritz!Box Fon WLAN 7270
    iPhone 5 with iOS 8.1
    iPad 2 with 8.1
    Apple TV (3rd Gen), newest software update, connected via Ethernet
    Any ideas, what the reason for that problem could be and how to solve it?
    Thanks a lot in advance.
    BTW: Sorry for my English. I am not a native speaker.
    Greetings from Germany

    I had the same problem after updating to iTunes 12 and using my iPhone 6.
    I have solved it by doing these simple steps:
    1. Turn off Home Sharing in iTunes. Close it.
    2. In your iOS 8 device, Turn on Home Sharing: Settings/Music/Home Sharing
    3. Open back iTunes
    It looks like in one of the updates, possibly iOS 8.1, had signed off Home Sharing completely.

  • Music home sharing does not work for my ipad1 since my last itunes update.

    This used to work, but since I updated itunes on my computer a few months ago, I cannot see the shared library on  my ipad. My ipad runs iOS5, and my computer has itunes11. I have tried all the tips in the support section. Tonight I saw the shared library under MORE while e ipad was linked to the computer via USB. As soon as I disconnected the cable, I lost the shared library.
    The WiFi connection is fine, however. I am using it now to connect and ask this question.
    Furthermore, why does my ipad not see my itunes music on the cloud? My work computer is logged on to my mac account and can play my music there, but my ipad cannot see the cloud or do home sharing anymore. Is this a strategy to force me to buy a newer ipad?

    Hi Wink65,
    If your iPad is not able to see the Home Sharing music, I would recommend trying some steps in this article:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Specifically, I'd pay special attention to steps 3 and 6, but a full run-through of the article would be the most thorough.
    Cheers,
    - Ari

  • Updated itunes now home sharing does not work

    i updated my itunes from 10.2 to the new 10.3 but now my home sharing does not work. the apple tv can not see the computer..my apple tv has the latest updated software as well. any help would be appreciated.. this seems to be an on going thing with apple lately where updated software causes more hea

    Troubleshooting Home Sharing
    Troubleshooting Home Sharing with Apple TV (2nd generation)

  • HT204291 After updating software on my Apple TV home sharing will not work. Both Apple TV and iMac have home sharing on but when Computer is selected on Apple TV I just get a message saying "turn home sharing on".  But it is.  How can I solve this problem

    I have just updated the software on my Apple TV since then home sharing will not work though I had not used it since installing iOS6 on my iPad 3.  Home sharing is shown to be on on the Apple TV and on on my iMac.  The Apple TV is connected to the router with an ethernet cable and all functions work correctly apart from my computer.
    I have done the following. 
    Switched off the Apple TV and rebooted, did the same with iMac
    Turned off home sharing then turned it on.
    Checked that home sharing is on on both devices.
    Selected Computer
    Get a message telling me to turn home sharing on - IT IS!
    Tried using airplay mirroring on the iPad but the airplay function is missing from iPad.
    It is so annoying since before iOS6 and updating the Apple TV software everything worked perfectly.  Any help would be very gratefully received.
    Thanks

    Hi Everyone,
    hope this message finds you all in time. The recent Apple TV update 5.1 is terrible. Apple knows it is which is why (thankfully for some relentless user -I have no idea who but I believe it was under threat) they have allowed to sign 5.0.2 again which means you can downgrade your Apple TV 2 and 3 to a 5.0.2 version via iTunes. Who knows how long they will keep the window open but I have downgraded my ATV early this morning. I couldn't post this earlier because I was out all day but I am doing it now.
    Here's how to do it:
    1) Connect your ATV to your computer via a Mini USB (not included with ATV but included with many other electronic devices) - in order for your ATV to appear in iTunes you must FIRST plug the USB cable to your computer and ATV and only THEN plug the power cable.
    2) Download your ipsw restore file from Apple.
    5.0.2 (ATV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
    5.0.2 (ATV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
    3) In iTunes select yout ATV, hold SHIFT and click on Restore
    4) Find and choose the downloaded IPSW file in the Open Dialog Box and hit Next
    5) As long as Apple still signs that version the Restore process will begin and will take a few minutes to complete.
    Enjoy!
    raadore

  • Home Sharing does not work. It's time for Apple to act.

    My specific question: Does anyone from Apple read these discussions *and* use the information to fix iTunes?
    My issue (and I've given up on this): Home Sharing does not work and it needs to be fixed. I use a Windows 7 based PC and can successfully access my iTunes library from my iPad, meaning all network requirements are met. However many artists and albums do not appear. I know this is not about the tagging/data for the albums.
    I found recommendations in these forums regarding the iTunes database (.itl), that this is a sign that the database is corrupted, and how to re-create it from the xml version. I used this technique and it did fix the problem - all albums and artists appeared. But within a day or so, they disappear again, meaning the .itl file is corrupted again and has to be re-created again. Also - if the .itl file is corrupted, then why does everything appear fine in iTunes? Somewhere, somehow the data are good enough to make iTunes work properly.
    Bottom line: If you can't get the basics right, then Home Sharing does not work. Some very helpful forum commenters said it could have something to do with the anti-virus software, but that is just passing the buck.  I should not have to know how to do all this. I should be able to turn on Home Sharing and enjoy the music from my iPads, iPhone, etc. Imagine you have to know how fuel injection works and be able to fix it every two days just to use your car - you should be able to turn the key and drive.
    There are more problems - I won't even get into how the album won't display properly on the iPad and other annoyances.
    Apple? Are you listening? Home Sharing does not work. It is the opposite of the image projected of easy-to-use, people-friendly products.
    I suggest you either make it work or turn off the feature.
    Joe

    If your database is constantly becoming corrupt, you have a problem on your computer, it is nothing to do with homesharing. The corrupt database does not affect iTunes because that uses another file. It's not passing the buck, by considering whether anti-virus software might be causing this, this is the sort of stuff anti-virus software does (although I'm not saying that's what it is in your case-I don't know at this stage), you can't hold Apple accountable for badly written software that you have put on your computer yourself.
    If you can't correctly identify what is causing your problem, you are never going to fix it.

  • HT202157 New apple is not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.

    I got new Apple TV 10 days back,its not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.
    I can only see pics and video saved in my iphone. No other options are working.The worst part is that its not asking wifi passoword.
    Not able to connect istores and itunes.
    I cannot do software update. Can anyone help in this content?

    Thanks Brian- I am not connecting it with iphone teethering. I am using it with my DSL wifi.
    I am using it with ethernet cable then its working fine.If i am trying to use it with WIFI then its giving error.
    I tried using Netwrok testing but its giving same error.

  • My home sharing is not working on my apple tv

    my home sharing is not working on my apple tv, i've turned it off and put it back on but it still doesn't connect to apple tv can someone please help because it's doing my head in

    The following article(s) may help you.
    Troubleshooting Home Sharing
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

  • Since updating to itunes 11, Home Sharing is not working

    Since updating to itunes 11, Home Sharing is not working.
    I am running Windows 7, 64-bit.
    All mobile devices are up to date with ios, including 2 apple tvs (2 & 3), iphone 4s and 3gs, ipad1 & ipad2.
    I've rebooted twice, turned home sharing off, then signed back in. Still nothing.  Rebooted the mobile devices.  No joy.
    Curiously, wi-fi sync is also not working - the devices are not showing up in itunes unless I plug them in. 
    Please Help!

    Yes, you guessed. After some rebbots it stopped working again .So it seems it is not a Firewall issue. Kept looking and found a suggestion in a forum to disable IPv6, apparently iTunes for Windows doesn't work well with IPv6. So I did, and after several rebbots and tests, both Home Sharing and Apple TV 1st Gen are working. To disable IPv6, follow this link
    http://support.microsoft.com/kb/929852
    It has an MS Fix It that will do it for you. Or if you wnat to go manual, follow this discussion, this guy was having the same issue several months ago
    https://discussions.apple.com/thread/3507281?start=75&tstart=0
    So far IPv6 is just being rolled out, and it will be a few years until everybody abandons IPv4 and go only with IPv6, so you shouldn't have any issues disabling it. And by then iTunes -I hope- should be fixed to work correctly with IPv6. Try it, and if you find any issues you can always enable IPv6 using another MS Fix it program, or manually reverse what you did
    Hope it is fixed this time!

Maybe you are looking for

  • POR transferred into MM(Backend) system in Extended Classic Scenario

    I am working on standard EBP-SUS Extended Classic Scenario. We have SRM Server 7.0 SP9  As we are successfully send PO from EBP to SUS. Issue : On working to Purchase Order Response,i am getting POR sent by SUS to EBP but we are not getting it replic

  • Cannot connect to the Internet via PPPoE in Windows manually?

    In Lion there is a little triangle after the Wi-Fi name (SSID) that can connect and disconnect the Internet via PPPoE. But how to do the same thing in Windows? Is it possible? And there is also a bug in Mac OS --- if you choose to show the connected

  • Choosing colors with eyedropper-it picks as background color

    Confused! I have read the help and viewed   a Jan Kalibi tut on using the color picker and painting. The instructions say that the eyedropper tool is supposed to choose the foreground color, but... If I choose the Eyedropper tool  it is  choosing and

  • Game progress between devices

    I have a iPad air and iPhone 5s. I play a game on my iPad then go to play the same game on my iPhone but all of my progress is lost. Is there any way you can transfer progress automatically? Any help on this would be great

  • X6 USB Connection failure HELP PLEASE :(

    Hi all i'm new here, i've just bought a Nokia X6 16GB, and upon plugging it into the pc via usb, the device has no response, I have tried all settings on the device, e.g. pc suite, and mass storage, and ask upon connection, but when plugging the cabl