Home sharing ok on iMac but not on iPad

Hello everyone- I am the proud owner of a brand new iMac (just arrived yesterday).
As part of this switch from the PC world I also went with Apple TV.  Currently at home I have an iPad (3G) and 2 daughters each with their own MacBook Pros.
In trying to set up home sharing, I have found that I can see the 2 duaghter's iTunes library (they have their own iTunes/Apple ID) on the iMac and, with some messing around, even on the Apple Tv device.  However, I cannot see anything other than my own (shared) library on the iPad.
Before posting I scoured the internet and this forum because about the last thing I wanted to do was post a question which had already been posted.  If I have somehow missed a similar posting please accept my newbie error.
Thank you.

Here are some help articles that may help you:
iOS- Setting up Home Sharing on your device
iTunes- Setting up Home Sharing on your computer
Setting up Home Sharing for Apple TV (2nd and 3rd generation)
Troubleshooting Home Sharing
Understanding Home Sharing

Similar Messages

  • Home sharing works for movies but not music?

    I have Home Sharing turned on my imac.  It works fine streaming movies and tv shows to my Apple TV, Mac Mini and ipads.  The media is stored on a NAS.
    My problem is with music.  When on the ipad, I open the Home Sharing folder. Only half a dozen albums show up.  The artwork is all mixed up.  On Songs, there are several hundred, but they are not properly listed (eg a hundred or so under "A", but they do not begin with the letter "A".
    I've tried retarting everything.
    I've tried deleting the library and rebuilding.
    I've tried creating a new library on imac.
    I've tried creating a new library on NAS.
    Nothing seems to work.
    Any ideas anyone?
    thanks

    After digging and reading since I posted this question, I finally found the issue. My Cisco VPN client was set to stateful firewall (always on). When I turned off this setting, all machines worked for iTunes sharing. The Vista box was coincidentally working because the Cisco VPN client 4.6 didn't work on Vista.

  • I am able to access home sharing on one computer but not the other

    Both computers have updated versions of iTunes. I am able to access my brother's iTunes, which is on hard wire as well as mine, but I am unable to access my mom's laptop which is on the Wi-Fi. Does that make a difference for they are all part of the same network. I am able to see her home share on the left bar, but it just loads for a while then disappears. Also, she is able to access my home sharing from her laptop which just baffles me even more.

    Power cycle the router and try 192.168.1.1 instead.

  • Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

    Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?

    Thanks for the interest. Preferences are similar on both machines: screen sharing, file sharing, printer sharing & scanner sharing all ticked and radio button for Screen Sharing is ON.
    My confusion is that I can get a network connection to the iMac by selecting "go to server" on the PowerMac running 10.5.8 but am unable to make the iMac connect to the PowerMac using similar selections. When ethernet cable is plugged in the PowerMac shows up on the finder bar on the iMac, but it does not allow either screen sharing or connection to occur - a dialog box tells me to check System Prefs and Network connection.
    I'm hoping to export a large file of photos from iPhoto on my iMac to my wife's PowerMac and hoped to achieve this with an ethernet network connection.

  • HT4352 I'm using the correct APPLE ID and password for Home Sharing on my computer but my AppleTv is not accepting it?  What's up with that???

    I'm using the correct APPLE ID and password for Home Sharing on my computer but my AppleTv is not accepting it?  What's up with that???

    I have the exact same issue. I also tried resetting my password. I can log in to iTunes on my laptop with the new password, on to my iPhone iTunes, but my Apple TV says it cannot recognize my password. I just did an Apple Tv software update a few days ago.
    I am able to log in to Netflix on my Apple TV just fine. I did not have to re-enter my password for that.
    Very frustrating. I hope Apple can figure this out soon and post a fix.
    Thanks for any advice.  Cheers.

  • I have set up home sharing for my music, but the playlists are not available. I have made the entire library available via 'Preferences' but no success with playlists. Any suggestions?

    I have set up home sharing for my music, but I can't access playlists, although I made the entire library available through 'Preferences'. Can anyone suggest a solution?

    ok i actually got a id set up and allegedly home sharing is on but the thing is the ipod when syncing keeps saying it can only use one itunes library do i want to erase my songs? i do not want to erase my songs. my itunes library i originally used is on my other computer which has no more disk space to add music to and this computer the xp also has not enough disk space to put both libraries on .. PLEASE PLEASE help!

  • I downloaded some home movies onto my IMac but could not find a way to burn them to a DVD.  Does Apple have software to do this or do I need to purchase one.  If so, what is recommended.

    I downloaded some home movies onto my IMac but could not find a way to burn them to a DVD.  Does Apple have software to do this or do I need to purchase one.  If so, what is recommended.

    but could not find a way to burn them to a DVD.
    Do you want to create a video DVD that will plan on a TV set via a DVD player or just burn the video files to a data DVD disk for storage?
    If the former the read the following:
    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Softwareor eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  Select Size = Medium or Large.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process.
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    However, there are video DVD authoring apps that are available at the App Store that will create a video DVD disk.  They won't be as extensive as iDVD but can create a simple video DVD.
    iDVD 7.1.2 is compatible with iDVD but we don't if it will be with the next system generation.

  • Cannot home share the game app purchased at iTunes store. Home sharing music works. Home sharing books works. But, when I try to copy the game app, it says my computer is not authorized. What am I doing wrong?

    Cannot home share the game app purchased at iTunes store. Home sharing music works. Home sharing books works. But, when I try to copy the game app, it says my computer is not authorized. What am I doing wrong?

    I've been struggling with a similar issue myself and just figured it out.  Some of my content had been purchased with an older Apple ID that I don't use any more.  When I authorized my second computer, I only authorized it for my new Apple ID, not my old one.  When I tried to copy my library to the new computer, many songs, apps, etc. reported the error "could not be copied because this computer is not authorized".  It drove me crazy because I knew the computer was authorized and much of my library came over just fine.
    Finally I selected some of the problem items, selected "Get Info" from the menus, and saw that they were all purchased by my old Apple ID.  I then authorized my old Apple ID on my new computer, and all of my files are copying correctly now.
    Would be great if the message said something like "...because this computer is not authorized for Apple ID [email protected]"

  • Home Sharing shared tv shows/movies but not music

    I turned on Home Sharing in my MacBook Pro, but I noticed it isn't listed on the left hand side in iTunes.
    I turned on Home Sharing on my ATV3 but it doesn't list my computer on the computers menu.
    Do I need iCloud Match in order to listen to my music library on the ATV3? I would have thought it would be there via home sharing? On the ATV3, my purchased movies and tv shows are in there, so where is my music llibrary?
    Thanks..

    From what you are saying, your movies and TV shows aren't there (or at least not by virtue of home sharing), redownloading of purchased content isn't done with home sharing.
    If home sharing was working correctly, you would have access to all your iTunes content from the computers section of the Apple TV, not just the movie/TV show sections.
    Your problem appears to be that home sharing isn't working. there may be a number of reasons for this and hence why I asked you to check whether both devices were using the same network. Other reasons might be that a firewall or anti-virus software is blocking home sharing.

  • What is difference between Shared ,Exclusive and Exclusive but not commulat

    what is difference between Shared ,Exclusive and Exclusive but not commulative lock modes plese tell me

    Lock objects are used to synchronize access to the same data by more than one program.
    The lock mode controls whether several users can access data records at the same time. The lock mode can be assigned separately for each table in the lock object. When the lock is set, the corresponding lock entry is stored in the lock table of the system for each table.
    There are three types of lock modes
    1.Exclusive
    2.Shared
    3.Exclusive not cummulative
    Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
    Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
    Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
    please go through these links:
    http://help.sap.com/saphelp_nw04/helpdata/en/a2/3547360f2ea61fe10000009b38f839/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eeb2446011d189700000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eebf446011d189700000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eed9446011d189700000e8322d00/frameset.htm
    briefly :
    You can lock the table or record by using following types of locking:
    1) Exclusive (E) the locked data can only be displayed or modified by single user i.e the owner of the object. Access to other users is denied.
    2) Shared (S) several users can access the same record simultaneously, but only in display mode and except the first one, who has asked for the data in update mode.
    3) Exclusive not cumulating (X) it is similar to exclusive lock. It allows only a single user access. E can be called several times from the same transaction. In contrast, a lock type X can be called only once during the transaction. Any other call for this lock is rejected.
    Activation of Lock Object
    1) When you activate the lock object, the functions are automatically generated. And these are ENQUEUE-EZN and DEQUEUE-EZN. EZN is name of the lock object.
    2) While ENQUEUE is used in program to set the code over the selected data depending upon the lock object arguments. DEQUEUE is used to release the lock.
    Thanks
    Seshu

  • Help... Have ate in living room & bedroom & I could works fine on iPhone4 as well as ipad2 wifi. I have home sharing enabled on all but when I rented a movie it was all good & charged but the download took over 24 hours & only in the bedroom.... Please he

    Help... Have ate in living room & bedroom & I could works fine on iPhone4 as well as ipad2 wifi. I have home sharing enabled on all but when I rented a movie it was all good & charged but the download took over 24 hours & only in the bedroom.... Please help

    The remote app can either automatically find libraries available on a network (with home sharing available) or if you haven't got home sharing enabled, you can manually pair an itunes library with the remote app (using a number that is generated by the app and then typed into the itunes library).
    That is why I am so confused, as it seems to be the home sharing that is the problem!

  • How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

    Can you give me a screenshot of the User Accounts window in Control Panel?
    Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

  • I am trying to import songs to my new macbook pro from my old computer using home sharing. Both computers say that home sharing is now on but neither show up in each other's library menu. I am logged on with the same apple id for both computers.

    I am trying to import songs to my new macbook pro from my old computer using home sharing. Both computers say that home sharing is now on but neither show up in each other's library menu. I am logged on with the same apple id for both computers. and both are on a stable wireless connection

    Logging into itunes store on each machine wth different Apple IDs is OK Autorising each others machines with the other Apple ID is OK. This is completley separate from Home Sharing
    For Home Sharing to work you need to
    File > Home Sharing > Create Home Share.
    You need to select one of the two Apple IDs you are using and ENTER THIS ON BOTH MACHINES WHEN CREATING THE HOME SHARE.
    Home sharing will then work

  • 2 atv's both have home sharing enabled but one asks to turn on home sharing on my pc but it is on so can only use one at a time to watch movies from my computer

    2 atv's both have home sharing enabled but one asks to turn on home sharing on my pc, but it is enabled on pc so I  can only use one at a time to watch movies from my computer

    Both atv,s are on the same network, they are wirless and the computer can see them and they are named different.
    what ever one i switch on first gets to stream from my computer and the other one asks for home sharing to be switched on, then if i switch both off and start the other one first it gets to stream and the other one which worked asks for home sharing to be turned on. i have hidden all functionality, netflix etc as these are for my 7yr old kids.

  • Have turned Home sharing on in "File", but if I try choose the sharing tab in "Edit", "Preferences", It says Bonjour needs to be activated.  Where do I do this?

    I'm trying to share my libraries on different PCs.  I have turned Home sharing on in "File", but if I try choose the sharing tab in "Edit", "Preferences", It says Bonjour needs to be activated.  Where do I do this?

    Try updating iTunes on your PC. Hopefully it'll re-install or fix the Bonjour issue.

Maybe you are looking for

  • Unable to startup in any mode - HELP!!

    Had continuous reboot issue. Tried all the usual methods to get to hard drive (recovery disk, disk utility, restore from backup, download OSX Mavericks, safe mode).  All failed (reboot at some time during the process or showed the drive could not be

  • Can I open a CS6 Photoshop file in Adobe Photoshop Touch for Phone?

    I am trying to rountrip a ps file to/from Adobe Photoshop Touch for Phone to/from CS6 Photoshop on a mac. Is it possible? It seems (so far) I can create a .psdx on the phone and edit on my desktop, but once editing in CS6 PS, I can't get that file ba

  • Apple Airport Extreme Base Station for PPPoE, DHCP and NAT with ActionTec DSL modem

    I just spent several hours trying to track down proper instructions for setting up my Apple AEBS to do the PPPoE, DHCP and NAT while connected to an ActionTec M1000 (no wireless module).  It turns out my initial set ups on both devices were correct,

  • Problem with image on timeline

    Hi, This problem happened out of nowhere. I have been working with FCE for a few months now. All the sudden, when I put the image on the timeline, it automatically zooms every image to the upper left hand side. I have already tried the button "always

  • Video input with DAC-100 and FCE

    I am having trouble getting video into FCE using a DAV-100 breakout box. FCE says the camara is connected but the controls won't work and the video does not show up unless I use the capture method. Does anybody know if there are any settings in FCE t