Home Sharing on more than 1 computer

There are 2 computer at my house that I'm trying to use on my apple tv. How do I get Apple TV to recognize the second computer. both are set to home sharing. I've turned on and off Home Sharing on the Apple TV and that is the only way I seem to be able to switch between the 2 computers. How can I have both available without the headache?

did you authorize all computers and ATV2 for the same iTunes store account ?
check out these support articles:
[_*Setting up Home Sharing for Apple TV (2nd generation)*_|http://support.apple.com/kb/HT4352]
[_*Troubleshooting Home Sharing with Apple TV (2nd generation)*_|http://support.apple.com/kb/TS3509]
also, these reads may prove helpful: one and two.
JGG

Similar Messages

  • Home Sharing between more than five computers

    Our family has 1 IMac, 2 MacbookPros, 2 iPhones, and 2 Ipads. I'm trying to set up Home Sharing between all devices and computers. Everything works except when I tried to set up our new IMac and got the message "Cannot setup more than 5 computers.....". Been looking all over the Apple support area and have as yet found anything. Hopefully I'll get a response here. Whoever helps, know in advance it is very much appreciated - Thank you.

    The limit of 5 computers applies to computer authorisations only. There is a limit to associated devices such as iPods etc but this also includes any authorised computers.
    Could you have perhaps had previous computers that you did not de-authorise before you parted with them. You can see how many computers are authorised by visiting your account settings in iTunes on your computer.

  • Can adobe software be shared across more than 1 persons computer?

    I was wanting to know if I buy the complete package can it be shared with more than 1 persons computer, possibly up to 3 people?

    If I read your intentions correctly, the answer would be no.   A single user license/subscription allows for working installations on two machines, only one of which can be in use at a given time.  It is not intended to be shared by a group.

  • So, I have created my home sharing from my base computer to my laptop. On my lap top I see the tab for home sharing but it will not let me connect to my computer to share my music over. I have done everything iTunes has told me to but it still won't work.

    So, I have created my home sharing from my base computer to my laptop. On my lap top I see the tab for home sharing but it will not let me connect to my computer to share my music over. I have done everything iTunes has told me to but it still won't work. Any help would make my day...

    I got some more info that may help.
    I put a cd on my laptop, and was able to share it to my computer... So the problem is only from my computer to my laptop. I tried the firewall thing and it did not help. I read the rest of the trouble shooting page, and nothing else applies. iTunes is an execption and already was. I can not think of anything else being my problem. Do you think I should re-install iTunes or would that be a waste of time? At this point I am about to just call Apple for some help because I am getting to stressed over this.
    Thanks

  • Home sharing comes up on computer, i click the library i want to see says downloading and then nothing

    Home sharing comes up on computer, i see the library i want to access,says downloading then nothing happens

    Hi Gary0129,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Cheers,
    - Judy

  • Can I use home sharing if the other computer is off?

    I have a Mac Book Pro and my husband has Dell Desk Top PC...can he use home sharing to hear my music if my Mac is not on?
    Also can he permanently put my library on his computer using home sharing?

    No your computer has to be on to  listen to the music.
    If your husband wants to listen to the music on your machine without it being on he would have to use the HomeSharing to import them to his machine

  • Tried to set up shared memory more than once?

    Hi all,
    Im getting a pop up error on 10.7.3.. It pops up very fast and is almost impossible to read.
    Having checked the console, this is the error..
    01/04/2012 13:59:12.457 com.apple.launchd.peruser.501: (com.facebook.videochat.'MyName'.updater[486]) Tried to setup shared memory more than once
    (Ive edited out my name from the string..)
    Can anyone tell me how to fix this?
    Thanks!

    I think this is a bug in some facebook-related software you have installed.
    Maybe update facebook stuff.

  • I'm trying to turn on home sharing with my notebook computer and I get error 3259

    Please help.  I can't turn on home sharing on my notebook computer because of error 3259.

    First remove iTunes and all associated software
    Removing and Reinstalling iTunes, QuickTime ... - Support - Apple  for xp
    Removing and reinstalling iTunes, QuickTime, and ... - Support - Apple for vista or 7
    Before reinstalling disable your antivirus software and firewall.

  • HT4527 I attempted home sharing, but my new computer is not finding my old.

    I attempted home sharing, but my new computer is not finding my old.

    Use one of the other methods mentioned in that article to move your media.

  • TS2972 home sharing will work from computer to apple tv but not the other way?

    home sharing will work from computer to apple tv but not the other way?

    Home sharing is one thing, physically copying is another thing.

  • Can't load home shared library on one computer

    I have a MacBook Pro running Snow Leopard 10.6.2 and a Dell Studio 15 with Windows 7. Each has the very latest version of iTunes 9 on it and a 500 GB HD. The library I want to share is slightly more than 200 GB in size.
    My home sharing problem seems to differ from others' issues and I have not seen a discussion of the problem anywhere on the Web. Basically, both computers see the other's library as a home share and, when I try to access each, I get the appropriate screen with the "settings" and "import" buttons on the bottom. However, only the Mac actually gets access to the other computer's library. (On the Mac, I can both see and import from the Dell library.) The Dell, however, will just display the message "Loading [library name]" and does not complete that task. Eventually, it appears to time out, since the "loading" message stops displaying and I get dumped back to the main library listing. This happens whether the McAfee firewall is running or not. (When it is running, I've enabled the two ports referenced in the Apple Home Sharing Troubleshooting Guide found at Apple.com. but that has made no difference.)
    I thought the issue might be a memory one, since the library is so large. However, the Mac is running with 2 gigs of RAM and the Dell has 4 gigs. I understand that the OS X and Windows 7 overhead requirements are about the same, so, if anything, there probably is more memory actually available to iTunes on the Dell. The other thought I've had is that the Mac may have a better wireless receiver than does the Dell, so it is better able to pick up the Dell over the network than vice versa. However, both machines' network strength indicators suggest they see excellent signals.
    Any thoughts from the experts here? Thanks for any help you can offer.

    Just to flesh this out a bit, the problem persists when I connect both computers to a wired network that includes an XP desktop system. The Mac can see and import from both PCs, but neither PC can see the Mac or the other PC. The latter fact suggests to me that the issue lies with the PCs and not with the Mac's transmission of data. Anyway, this still does not work as advertised.

  • I am home sharing songs from my computer (library) to another authorized computer (library), the songs will import, but once i sync the iphone (4s) to this computer the songs are shaded and will not import onto the iphone, what the heck is going on?

    I am transfering songs from one computer to another using home share.  Both machines are authorized in home sharing.  The songs import from (my) windows computer to the other (my wifes) authorized MacBook Pro, computer just fine.  Once the songs are in the library and i try to sync her Iphone (4s) to her computer the songs ar greyed out and i can't play them nor see them under iPhone after sync is complete.  What the heck is going on?  BTW, the songs that i have imported are either songs i burned from a CD or songs i have purchased from the iTunes store, so they should sync no problem!?  Help please.

    screen print of issue...

  • How do I limit home sharing to my own computer and apple tv

    I have a renter in my home......how Can I use home sharing on my mac and apple tv without the renter having access to my computer

    The short answer: because Home Sharing isn't designed for sharing apps, and apps aren't designed to be shared.
    The longer answer:  Think of it like this...
    You download some music in iTunes.  With Home Sharing, another user can listen to it by streaming it over the network.  But the data itself is on your computer.  If you turn off the computer or take it off the network, the other user can't access it.
    But if you send another user the app, they aren't just streaming the data- they installed it on their iOS device.  Because they weren't the one that purchased it, such a transfer could easily be considered "piracy" or "stealing," and nobody likes that (least of all, Apple). 
    When iTunes sees this app, it obviously recognized it, as if saying, "Hey, how did you get this app on your device, if I have no record of you purchasing/downloading it from the iTunes store?"
    post edited to correct spelling errors

  • Why can't I get album LPs through home sharing to my other computer?

    I had just setup itunes on my second computer using the same account through home sharing and it all work well. I then bought an entire album from the itunes store with the LP. The LP automatically got on my first computer and is shown on my second. However i can't access it on the second computer. The text is faded as if it were being downloaded, but it isn't.  

    arcover1 wrote:
    The public places, businesses, stores have provided me their passwords and to no avail.
    When you go to such a place you need to do two things:
    Settings > WiFI ... select the place's network and enter the password.
    Generally (not every time, but very frequently), the place will have a "Terms and Conditions" you must agree to in order to use their WiFi.  Those Terms and Conditions will appear either once you enter the WiFi password, or as soon as you open Safari.  Let them appear and agree to them.

  • HT204291 After updating software on my Apple TV home sharing will not work. Both Apple TV and iMac have home sharing on but when Computer is selected on Apple TV I just get a message saying "turn home sharing on".  But it is.  How can I solve this problem

    I have just updated the software on my Apple TV since then home sharing will not work though I had not used it since installing iOS6 on my iPad 3.  Home sharing is shown to be on on the Apple TV and on on my iMac.  The Apple TV is connected to the router with an ethernet cable and all functions work correctly apart from my computer.
    I have done the following. 
    Switched off the Apple TV and rebooted, did the same with iMac
    Turned off home sharing then turned it on.
    Checked that home sharing is on on both devices.
    Selected Computer
    Get a message telling me to turn home sharing on - IT IS!
    Tried using airplay mirroring on the iPad but the airplay function is missing from iPad.
    It is so annoying since before iOS6 and updating the Apple TV software everything worked perfectly.  Any help would be very gratefully received.
    Thanks

    Hi Everyone,
    hope this message finds you all in time. The recent Apple TV update 5.1 is terrible. Apple knows it is which is why (thankfully for some relentless user -I have no idea who but I believe it was under threat) they have allowed to sign 5.0.2 again which means you can downgrade your Apple TV 2 and 3 to a 5.0.2 version via iTunes. Who knows how long they will keep the window open but I have downgraded my ATV early this morning. I couldn't post this earlier because I was out all day but I am doing it now.
    Here's how to do it:
    1) Connect your ATV to your computer via a Mini USB (not included with ATV but included with many other electronic devices) - in order for your ATV to appear in iTunes you must FIRST plug the USB cable to your computer and ATV and only THEN plug the power cable.
    2) Download your ipsw restore file from Apple.
    5.0.2 (ATV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
    5.0.2 (ATV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
    3) In iTunes select yout ATV, hold SHIFT and click on Restore
    4) Find and choose the downloaded IPSW file in the Open Dialog Box and hit Next
    5) As long as Apple still signs that version the Restore process will begin and will take a few minutes to complete.
    Enjoy!
    raadore

Maybe you are looking for

  • Iphone flickering?

    Okay, so this may be the SECOND Iphone I go through in 2 weeks Last week, Apple had to replace my Iphone as the screen was full on shaking when it would warm up a bit... it did my head in..as you can imagine.. NOW - new phone, similiar problem.. The

  • Purchase requisition generate again

    Hi Experts, Please help. I have created one sales order & run MRP ( MD02 ) . I got purchase req. for raw material. Convert this pur.req. to purchase order & done GR for partial qty. System genrate again pur req. when I run MRP again with planning mod

  • Adding more than one video effect

    I have a short clip that I want to give both the "aged film" look to as well as make it black and white. Both these effects are available under Window > Clip Adjustments, but I can't figure out if it's possible to use both at the same time. Anyone kn

  • Asr-group feature in active/standby mode

    Hi , I would like to know if anyone had used asr-group freature in active/standby mode. Is it not recommended by cisco for active/standby mode ? The feature works in both environment. Thanks in advance Tomy

  • Lost Essbase Filters in Essbase 11.1.2.1

    Hi, Recently i was having trouble with an application/database that had Essbase filters setup. I had to delete the app/db and in the process deleted the essbase filters. After re-creating the app/db i wanted to restore the essbase filters instead of