Home sharing to iPad has stopped working

Last night, my apple tv demanded I submit my password. So I did, twice (definitely correctly), but apple tv said it was incorrect, and that I should visit apple.com to sort out the problem. Can't find a solution, but I have checked all my devices and my itunes account, and they are all still using the correct password. Annoyingly, however, my iPad now won't play movies from my itunes on my laptop, because I 'do not have permission'. I can only assume these two instances are connected, as I regularly watch itunes media on my iPad. Any help would be hugely appreciated, thank you.

I have no Idea why the headphones will not pair. However, many users have reported that their care systems stopped working after the iOD update. I would contact your car manufacturer.

Similar Messages

  • A magazine's app on my iPad has stopped working.  When I open the Newsstand folder and click on the app, the screen dims briefly, then returns to the Newsstand folder. The other app in my Newsstand folder (Wall Street Journal) opens without any problem.

    A magazine's app on my iPad has stopped working.  When I open the Newsstand folder and click on the app, the screen dims briefly, then returns to the Newsstand folder. The other app in my Newsstand folder (Wall Street Journal) opens without any problem, and this magazine's app opens just fine on my wife's iPad.
    I have deleted the app and reinstalled it from the Apple store and that makes no difference.  I have also done a hard reboot on my iPad with no result.
    Any thoughts about what might be wrong? 

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • TS3274 My ipad has stopped working, I cannot turn it off as the screen does not appear to be working

    Help. 
    My Ipad will not respond, the screen has stopped working and I cannot turn it off

    My ipad mini just lost screen. I tried the hold both buttons down and i did see the apple logo, but didnt fix it. i know its alive, because it beeps when i connect it to power or computer.  Are there any other fixes?  I received this as a door prizeon black friday and have no receipt?? but i did register it. what should i do?

  • I updated to the latest itunes then went to sync my ipad I had a hard time getting it to recognize the ipad then it stopped agter step 3 and I could not get it to see the ipad. Most of the software on the ipad has stopped working can not get it to work?

    looking for help syncing my ipad with pc after I upgraded to the latest itunes 10.4 it did not sync with the ipad. Hard time seeing the ipad when it did started to sync it stopped would not let me finish. I can no longer get my programs to work on the ipad and now when I go to sync it itunes it freezes and does allow me to see the device. I have uninstalled and reinstalled itunes three separate times following the instructions that I found

    Many thanks b Noir
    This is a copy of ONEof the keys  in the registry I changed  as told by Apple support today. I also have changed others as instructed by GEAR  software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others  they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so  I downloaded the software and installed again.
    Sorry, just this minute went to insert image  and it is giving me a message saying this sort of content  is not allowed?.
    The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr  SiRem GEARAspiWDN.
    The GEARsoftware info about manually deleting  GEAR drive is from:
    http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
    I hope you can help

  • Office Home and Student 2010 has stopped working Unspecified Error has occurred. Request cannot be processed at this time. Please try again later ( 0x8007000D )

    My office is saying its an unlicensed product and it prompts me to re install.  It come up with Microsoft Activation Wizard then when I select to activate software via the internet an error comes up saying:
    Unspecified Error has occurred.  Request cannot be processed at this time. Please try again later ( 0x8007000D )
    Please can you help me? I have tried pressing shift and right click an using system administrator but still not working.  I've called the UK helpline and have been cut off twice after repeating myself to the person on the other end.  May be easier
    to try and get some assistance on here? 

    Hi,
    This error can indicate a permissions issue in the registry and/or other operating system issues.
    Here is a
    blog post which descripts some fixes to this specific error:
    Check the Device Manager first to determine whether the issue was caused by an underlying operating system issue.
    If it's not an issue with the operating system, try the rest steps descripted in the blog to troubleshoot the issue.
    Please have a try and feel free to post back with any findings.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • TS3274 The sound on my iPad has stopped working. I've checked settings, but still unable to resolve.  Have you any suggestions?

    My iPad sound is dead.  Can't seem to find a solution.  Any ideas to resolve? Anyone ?

    Try Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • My iPad 1 has stopped working after trying to instal iOS 5. Can you help restore?

    My iPad has stopped working after trying unsuccessfully to instal iOS5. All that's currently showing on the iPad screen is a white USB cable with a thick arrow pointing towards the iTunes logo (black double note within a white rimmed circle and a blue background).I cannot switch it off and have seemingly lost everything that was on it.
    Please help!

    That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
    iTunes: Restoring iOS software

  • My iPad 2 home button has stopped working I have tried the swivel from landscape to portrait whilst holding the button, I have tried holding the off button then the home button and I was told I could create my own home button in the settings but I can't!

    My iPad 2 home button has stopped working all together, I have tried the swivel from landscape to portrait whilst holding the home button, I've tried pressing the off switch then pressing the home button, the other thing I was advised to do was create a home button in the settings under the accessibility option but I don't have the option I was advised to use under there! Help! It's really frustrating having to turn the device off everytim I want to switch apps and I really can't afford to send it away to be mended! Many thanks in advance

    The accessibilty setting that was mentioned is:
    * Enable AssistiveTouch
    Enable AssistiveTouch which floats a virtual button on-screen which can mimic all hardware buttons on the device:
    Settings>General>Accessibility>AssistiveTouch: turn ON
    *Note* If you power off the device using the AssistiveTouch panel (tap the on-screen AssistiveTouch button, Device>Lock Screen (tap and hold to power off)), you will NOT be able to power on the device *if your Sleep/Wake (power) button is not functioning*. You will need to connect the powered off device either to a PC's USB port or an external charger to power the device back on.

  • I have a WiFi home connection. It works on my laptop but has stopped working on my iPad, which I tried resetting but it didn't help. It recognises the SSID but then asks for IP Address, Subnet Mask, Router etc. Any ideas on what to do?.

    I have a WiFi home connection. It works on my laptop but has stopped working on my iPad, which I tried resetting but it didn't help. It recognises the SSID but then asks for IP Address, Subnet Mask, Router etc. Any ideas on what to do?.

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • My iPhone 5 won't charge properly, computer doesn't recognise it and the home button has stopped working completely, it hasn't been dropped or water damaged at all, any ideas?

    My Iphone 5 won't charge properly, computer won't recognise the device and also the home button has stopped working completely, it hasn't been dropped or suffered any water damage, anybody else had anything like this? and what are the solutions? thanks

    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.

  • My home button has stopped working on my iPod touch 4th gen. Is there a way to fix it?

    My home button has stopped working all together!!!!! Any ideas how to fix??
    Many thanks.

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • HT4097 itunes has stopped working ipad 2

    something happen suddenly to my ipad2 32gb.
    the screen is black, but the ipad is on ! i can't see nothing on the screen, the screen is all black i thought that if i will restore it everything will fix.
    i tried to restore it with itunes, but i can't restore it if i don't update it first, so i downloaded the ios 6 on itunes (for pc) and after 2/3 hours, before the download finished itunes it close by him self and it sais: itunes has stopped working, check online solution or close the program.. i tried on 2 different computer but always the same... help ? what can i do ? i alreay presser the lock botton and the home button together for a minute and more, nothing changes...

    Try Googling "sync without iTunes".
    There are free alternatives and there are not so free alternatives.
    Btw, to check if AVG is causing the problem, you should uninstall AVG and not just "turn it off".
    Also, can you describe how you go about uninstalling a program? For example, how did you "delete" iTunes?

  • Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes

    Since downloading iOS 8 on my iPad 2 it has stopped working and will not connect to iTunes to do a restore.  I have tried to do a reset using the sleep button and home key and all I get is a white band across the screen and then it boots into the main system but it is just a series of white lines going across the screen, how can I do a restore on this?

    Hey dbwithers,
    Thanks for the question. I understand that you are experiencing issues with your iPad after attempting to update to iOS 8. To isolate these issues, let’s try placing your iPad in recovery mode and attempting a restore with iTunes:
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • The sound on my iPad 2 has stopped working....

    The sound on my iPad 2 has stop working.....no sound in app, home screen, no locking sounds, keyboard clicks, no music, no movies.....no nothing! I have reset settings, I have tried to reboot the iPad numerous of times, I have played with the slide rocker, switched settings back and forth and yet nothing. Is there anything I can do my son iPad is now 2 years old & out of warranty & apple care please help!

    With headphones?
    Speakers?
    Try:
    - Reset the iOS device. Nothing will be lost (done)
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings (Done)
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • New iPad tethered to iPhone 4 both on iOS 6, iMessage has stopped working.

    Since updating to iOS 6 on both devices, iMessage has stopped working on the iPad when tethered.
    It still works on the home wifi, but the progress bar goes to about 95% done before a send failure message comes up.
    I haven't found any other apps not working over the tethered 3G network
    iMessage is turned on and works elsewhere.   

    Hello square_one,
    Thanks for using Apple Support Communities.
    Please follow the article linked to below to ensure your Messages notifications are configured correctly.
    iOS: Understanding notifications
    http://support.apple.com/kb/HT3576
    Take care,
    Alex H.

Maybe you are looking for

  • Scammer trying to make you believe they are in lov...

    Ok, first I knew what would to come from this request and I wanted to bring it to the end to try to prevent this for other skype users.    I will change my name in this but let his. [2013-06-21 21:08:57] GEN DAVID MILLER: Coucou ! Merci de m'ajouter

  • Problems between PE4 and 10

    I have a drawing that was resized to a certain length using PE4. I have now upgraded to PE10 and when I print the drawing , it prints 3-4 times  larger than what it should be. When I view the drawing, the ruler at the top of the screen shows it being

  • WebHelp - What Files Need to be Posted on the Sever

    Hello, can anyone tell me what files & folders I need to post to the sever to enable my project to run. I have just developed a small project and in the folder where it is saved there are two folders and 44 other files inc the .xpj file. Can you help

  • Camera Raw 5.7

    When I want to send a file from LR 3 Beta 2, I get a dialog box saying that I should upgrade to Camera Raw 5.7.  However, I can't find this on any of Adobe's sites.  Is it available?

  • PDF icons look shredded

    Why have all my PDF icons suddenly appear as shredded icons?