Home sharing with iOS remote app stopped working

In my home, I have four macs (3 minis and an imac), each with their own iTunes media library, and 2 ATVs.  Home Sharing is turned on, with the same ID on all of these devices.  When I operate each device natively (using keyboard/mouse or ATV hard remote), I can see the music library on each of the other devices, and play that music.  I also have an iPhone and an iPad, with the Remote app installed, and using the same Home Sharing ID.  On each of these, I can see each of the macs and ATVs, and the music in their individual libraries, and can play that music on the device on which that library resides.  So far, so good.
What I can't do, although I could do it several weeks ago, is use the remote app to access one device, and then play music from the shared library on another device.  I can see the other devices' libraries, but when I select "music" within that device, it says "no songs".  This is very curious, and like I said, it worked a few weeks ago.
Has anyone seen this issue, and do you know how to fix it?
Thanks.

Glen Verran wrote:
But this is where the problem starts. While I am using the remote app, I exit the app to do something else on the phone. I go back into the app, and the app attempts to connect to my iTunes library. It fails!!
I'm having this exact same problem. I was using the remote app with iTunes on my computer and speakers connected to my airport express for months with no issues at all. It worked flawlessly. But I got the new apple tv a few days ago and had to turn on home sharing as part of the setup...and then the problems began. I started having the exact issue described by the original post: the remote app will just randomly not be able to see my iTunes library. Sometimes it works fine, sometimes it just sits there spinning for a while and eventually says it couldn't find my library. If I wait a few minutes it will eventually just start working again.
This is extremely annoying and is making me want to just return the apple tv and go back to my previous setup which worked perfectly. If Apple would at least acknowledge the problem and that a fix will be forthcoming, I would be satisfied.

Similar Messages

  • Bitrate Home Sharing with iOS ?

    Witch Bitrate and sampling rate are used in iTunes Home Sharing with iOS ?

    The following says iOS 4.3 or later. It also says the latest version of iTunes and that requires OS X 10.6.8 or later, but it might be worthwhile to try all of the troubleshooting steps anyway. http://support.apple.com/kb/TS2972

  • Apple Remote app Stopped working

    Since update 2015-003, my iOS Remote app will not work. Does anyone know why this is and how to fix?

    Hello Wrains1972,
    The pairing process happens when you turn on Home Sharing.  
    Set up Remote app for iPhone, iPad, and iPod touch - Apple Support
    https://support.apple.com/en-us/HT201664
    Turn on Home Sharing using Remote
    Connect iPhone, iPad, or iPod touch to a Wi-Fi network on the same local network as your Mac, PC, or Apple TV.
    Open the Remote app on your iOS device.
    Turn on Home Sharing from the Remote Settings screen.
    Sign in to the same Home Sharing account you used to sign in on your other devices.
    After you set up Home Sharing on one or more devices, Remote will pair with those devices and you can start controlling them. You can use separate Apple IDs for Home Sharing and the iTunes Store on an iPhone, iPad, or iPod touch. For example, you can sign in to Home Sharing using one account and then use a separate account for the iTunes store.
    - Judy

  • Help! Everything was working and now for no reasons with no changes made the home sharing on the apple TV stopped working! now i cant play games on ipad using apple tv!

    WHat do i do? the home sharing is on on all devices. all the device r connected to the same connection, it just stopped working for no reason!!!!!! yesterday it worked, today i just listened to the radio on apple it and it stopped working! what do i do??

    have you tried to reboot both atv and ipad?

  • TS1741 Remote app stopped working

    Hi folks,
    I'm having trouble using the remote app with my iPhone. It used to work just fine and then all of a sudden it stopped working. All I get now is that "Turn on Home Sharing on a computer" message. I've tried uninstalling and reinstalling the app. I've tried restarting iTunes. I've tried all the other applicable help suggestions on this site. Nothing works. I don't know what else to do.

    Most likely because your phone or your Apple TV has lost WiFI connection to your local network.  Not enough info in your post for a more specific suggestion.

  • ITunes Home Sharing with iOS 4.3

    I have a MacBook Pro, 1st and 2nd generation Apple TV, iPhone 3GS, and 3rd Generation iPod Touch (yeah, BIG fan of Apple!). When I bought the 2nd generation Apple TV I was able to setup Home Sharing on my MacBook Pro and the new Apple TV. According to Apple's website, with iOS 4.3, you can now share your entire iTunes library on any mobile device running iOS 4.3. On my iPhone 3GS, I went into settings and turned on Home Sharing. However, when I trying to get a video that is playing in iTunes on my MacBook Pro and get it to play on my iPhone 3GS, I am only seeing the option of either the computer or 2nd generation Apple TV.

    Home Sharing is not a 'push' feature it is a 'pull' feature.
    By that I mean that you cannot push content from iTunes to your mobile devices.
    What you do is pull the content from iTunes onto the mobile device.
    You are confusing AirPlay (which pushes content) with Home Sharing (which pulls content).
    On the mobile device go into the iPod App and then into the ... (more menu) at the bottom, you should see the Shared option, pick this and it will allow you to select the iTunes library. You can then stream content from it (pull).

  • Home sharing with IMac and applet  not working

    Sharing is turned on my IMac.  My Apple TV is on and can see the name of the IMac. The iMac has photos selected but they don,t display on the Tv.   I have verified the IMac has most recent version of ITunes. Been through TS guide, no luck. Apple TV says to turn home sharing on but it is already on. Any suggestions.

    I have 2 Apple TV 2s.  I updated one to the latest iOS and it immediately lost the connection to my home shared iMac.  A week later I updated the second ATV2 and it immediately lost the connection, BUT I regained the connection with the first ATV2 I had updated earlier.  The second still won't connect even after exhausting EVERY solution numerous times and the setting on both ATV2s are identical.  Hoping the next iOS ATV update solves the problem.

  • HT4352 home sharing with ios device

    Can I set up my iphone to display photos & videos with Apple TV?

    Home sharing is for displaying contents from your computers iTunes library.
    If you wish to view media from your iphone on ATV, use airplay
    http://support.apple.com/kb/ht4437

  • Home Sharing with Apple TV does not work

    Home sharing is turned on for both iTunes and Apple TV.  Yet no files are synced to Apple TV from iTunes.  I have tried turning Home Sharing off and on both devices several times. I have also re-installed iTunes.

    If on wifi try ethernet
    Go to netstumbler or similar and get a network report, look for signal strength and noise
    Make sure port 123 is open on router (refer to manual if unsure)

  • TS2972 Home Sharing with ATV stopped working after upgrade to iTunes 11

    After upgrading to iTunes 11, my two PCs are no longer visible to Apple TV or the iOS Remote App.  I went through all the steps in "Troubleshooting Home Sharing" http://support.apple.com/kb/TS2972 without success.  In additions, I tried:
    Turning Home Sharing off, then on again on both PCs
    Re-created Firewall rules for iTunes
    Ran a factory reset on Apple TV
    Disabled iPV6 on the network adapter, based on a blogger's fix for an iTunes 10 problem
    Some other observations:
    Home Sharing was working with Apple TV an hour before I ran the updates for iTunes 11 and Apple TV. 
    The Apple TV and iOS Remote App are working together, so the network settings must be correct.
    The PCs in question are running Window 8 Pro 64-bit and Windows 7 Pro 64-bit
    The two PCs can see eachother's iTunes.
    It seems likely this is an iTunes 11 issue, but upgrading ATV2 at the same time clouds the diagnostics.
    I was just about to order two more Apple TVs, but now have second thoughts now that my ATV2 is just a doorstop. 
    Any suggestions? 

    You are not alone with issues related to the e1000e (but all they concluded was that reloading the module makes it work again):
    https://bbs.archlinux.org/viewtopic.php?id=145564
    It seems like this is more your issue:
    http://permalink.gmane.org/gmane.linux. … devel/8932
    But if none of those boot flags work for you, then there's not much you can do, and you'll have to write a script to reload the module each time after initial boot finishes I guess until the module gets fixed.
    Also, power management of the PCIe interface causes the e1000e to shut off after a while as well (lots of people on CentOS noticing this):
    http://serverfault.com/questions/226319 … ie-aspm-do
    So you can use that boot parameter to stop that from happening, if that becomes an issue for you as well.

  • How can i connect home sharing and the control app with 2 IP addresses?

    i am using my macbook pro at school and i also take it back home, and when i'm home the home sharing with my iPhone 5's Remote app works perfectly fine, just that when i'm back to res at school it doesn't work for some unknown reason. i've checked everything including the firewall and stuff and itunes home sharing is turned on, i even tried using another home sharing apple id but it still doesn't work. somebody please help!!!
    thanks!

    If you use eithernet for your main connection then just plug the TC bridged into the network.
    If you use wireless for your internet connection then you can use the TC isolated from the network by ethernet.. but this is really only convenient on a desktop Mac.
    The instructions I put in this thread with screenshots.. see near the bottom.
    https://discussions.apple.com/thread/4817218?tstart=30
    It is a bit tricky so if you have questions ask back here.
    Just to say a USB for firewire external drive is faster and more reliable than a TC.. cheaper to buy as well.. although since you already have the TC that is not a concern.. but you can ebay the TC and buy a bigger and better external drive with the proceeds.

  • Home sharing with iTunes 10.7, iOS 6 and A-tv 5.1.1 fixed

    I have finally resolved all the issues I was having with home sharing after installing iTunes 10.7, iOS 6, and Apple TV 5.1.1.  Everything with home sharing was failing; movies would never load, music would start plaing but then start buffering.  None of my Apple devices were working. I have been trying to resolve this for weeks now.  My solution was the 5 GHz WiFi on a Linksys E3200.  I disabled the the 5 GHz and everything started working.  I the went through every wireless setting but nothing worked with the 5 GHz turned on.
    I hope this helps,
    Laz

    I just don't understand why it's so hard for all of us to acknowledge the simple fact that Home Share (and Match) simply don't work. They don't, that's all. Apple is great for hardware, but lousy on software (see also me.com, Final Cut, etc.)
    Why in the world should I spend my time trying to fix something that someone else has made, without gettin paid, when the same team who created it isn't able to fix it? I just don't understand.
    Every few days somebody comes up with a fix for Home Share, only to repost a few days later with a "wrong, it stopped working again".
    I really don't mean to be offensive, and I really appreciate other fellow's hints and helps in this forum,I try to give my help as well when I know of a solution, but when it doesn't work we should just drop it. iTunes is a lost case, sadly.
    Vignus

  • Why do some apps stop working after update to iOS 6?

    I notice one of my apps stopped working after the iOS 6 update, in particular Uno HD, which I paid $5 for.  Why did this happen?

    I had solved the problem by installing the free app, which seemed to reset something, then I deleted the free app, and the paid version continued to work until the next day.  I was going to show one of my friends the game, and then it once again would not open- the same problem was back, as soon as I went to open it, it crashed back to the desktop without opening the game.  I had to re-install the free version again, and for a while, neither version would work, but then after a while, it started working again.  I guess I have to leave the free app installed or I won't be able to use the paid version of Uno.
    EDIT
    Just checked again, took the Uno app out of resident memory by double-pushing the home button and holding the app icon til it starts to shake, and then hit the minus symbol, which deletes it out of resident memory.
    Went to open it again, and it of course crashed back to the desktop again.  So there is some issue with it that is making it unstable.
    I have to keep pushing on either one of  the app icons continuously until one of them starts, and then the other one will start.
    Gameloft needs to do an update.
    Message was edited by: Sonic Bodhi

  • TS3274 After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

    After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

    Hi Midnightbrat,
    Welcome to the Support Communities!
    The troubleshooting steps for the camera on the iPad are similar to the iPhone:  I've highlighted the pertinent steps below:
    Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Camera
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
    Try turning the iPad off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try switching between the front and the back cameras to verify if the issue persists on both.
    I hope this information helps ....
    Have a great day!
    - Judy

  • IOS apps stop working

    Judging by the response in other forums this problem has been around for years through many iOS iterations. Every month or two most of my third-party apps stop working on my iPhone 4S. This is not related to multiple iTunes store accounts or any app or os update. Happens out of the blue. Hopefully Apple can fix this soon. The workaround is to download any free app from the store. This seems to get all third-party apps going again. A hard reset does not help. Strange ......

    I had solved the problem by installing the free app, which seemed to reset something, then I deleted the free app, and the paid version continued to work until the next day.  I was going to show one of my friends the game, and then it once again would not open- the same problem was back, as soon as I went to open it, it crashed back to the desktop without opening the game.  I had to re-install the free version again, and for a while, neither version would work, but then after a while, it started working again.  I guess I have to leave the free app installed or I won't be able to use the paid version of Uno.
    EDIT
    Just checked again, took the Uno app out of resident memory by double-pushing the home button and holding the app icon til it starts to shake, and then hit the minus symbol, which deletes it out of resident memory.
    Went to open it again, and it of course crashed back to the desktop again.  So there is some issue with it that is making it unstable.
    I have to keep pushing on either one of  the app icons continuously until one of them starts, and then the other one will start.
    Gameloft needs to do an update.
    Message was edited by: Sonic Bodhi

Maybe you are looking for

  • "IWD Bus Enumerator disabled" error message in LSC after Windows 8.1 upgrade

    Hi there, I just upgraded my T430 from Windows 8 64-bit to Windows 8.1 64-bit. After restart, LSC shows an "IWD Bus Enumerator disabled" error message. I went to the device manager, right clicked on IWD Bus Enumerator and selected the "update driver

  • I am cloud backed up on my PC but want to change to Mac.How to?

    I am backed up on the cloud on my PC which has crashed. I want to restore but to a Mac. What to do?

  • Split an inbound xml message in to multiple o/b idocs

    HI, We have a requirement to split an XML message(Source) into multiple idocs with different order nos and respective item details. We are working on XI 3.0 and we have a restriction not to use the BPM. Could you please let me know whether its possib

  • I photo and the iphoto library

    Guys - Being fairly new and inexperienced with the whole iphoto thing i think i have mad "a fatal error". Allow me to explain... I have put a several dozen pictures into iphoto and begun organising events. all going well.. There were some pics i didn

  • My I pod music is gone

    All music (from CDs) is gone from my iPod. I plugged it into another computer with an I tunes account and now all of the music I had ,that wasn't bought is missing. I really don't know what to do because my computer isn't recogniIng that there is any