Home sharing works for movies but not music?

I have Home Sharing turned on my imac. It works fine streaming movies and tv shows to my Apple TV, Mac Mini and ipads. The media is stored on a NAS.
My problem is with music. When on the ipad, I open the Home Sharing folder. Only half a dozen albums show up. The artwork is all mixed up. On Songs, there are several hundred, but they are not properly listed (eg a hundred or so under "A", but they do not begin with the letter "A".
I've tried retarting everything.
I've tried deleting the library and rebuilding.
I've tried creating a new library on imac.
I've tried creating a new library on NAS.
Nothing seems to work.
Any ideas anyone?
thanks

After digging and reading since I posted this question, I finally found the issue. My Cisco VPN client was set to stateful firewall (always on). When I turned off this setting, all machines worked for iTunes sharing. The Vista box was coincidentally working because the Cisco VPN client 4.6 didn't work on Vista.

Similar Messages

Home Sharing shared tv shows/movies but not music

I turned on Home Sharing in my MacBook Pro, but I noticed it isn't listed on the left hand side in iTunes.
I turned on Home Sharing on my ATV3 but it doesn't list my computer on the computers menu.
Do I need iCloud Match in order to listen to my music library on the ATV3? I would have thought it would be there via home sharing? On the ATV3, my purchased movies and tv shows are in there, so where is my music llibrary?
Thanks..

From what you are saying, your movies and TV shows aren't there (or at least not by virtue of home sharing), redownloading of purchased content isn't done with home sharing.
If home sharing was working correctly, you would have access to all your iTunes content from the computers section of the Apple TV, not just the movie/TV show sections.
Your problem appears to be that home sharing isn't working. there may be a number of reasons for this and hence why I asked you to check whether both devices were using the same network. Other reasons might be that a firewall or anti-virus software is blocking home sharing.

ITunes sharing works for Vista but not XP on the same network

So all the basic settings are right under Edit->Preferences to share and seek shared music on the network.
Here's the topology:
A - Vista Laptop (wireless)
B - XP Service Pack 2 Laptop (wireless)
C - XP Service Pack 2 Desktop (wired)
A can see C
C can see A
C can see B
A can see B
B can't see anything
Since the other machines can see B I'm lost... can you help?
Message was edited by: Ryan Buckner

After digging and reading since I posted this question, I finally found the issue. My Cisco VPN client was set to stateful firewall (always on). When I turned off this setting, all machines worked for iTunes sharing. The Vista box was coincidentally working because the Cisco VPN client 4.6 didn't work on Vista.

Album Art works for most, but not all

I was reading previous forums on the subject, but no clear answer was given..
The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
So I ended searching this forum for related problems...
And decided to join my problem to this entry.

Flash shockwave 11.5 works for youtube but not amazon instant video

Shockwave 11.5 r502 works for Youtube but not for Amazon Instant Video.

Hi,
It asked me if I wanted to install something to make the videos load faster -
Check Safari / Preferences - Extensions. Might be lurking there. If so, select the plugin then click Uninstall.
Check:
~/Library/Internet Plug-Ins (~) Tilde character represents your Home folder
Check:
/Library/Internet Plug-Ins
/Library/Application Support
/Library/Input Managers
And check your Safari downloads folder. If the file is still there, double click to open. Might be an uninstaller you can use.
Help here for troubleshooting Flash
Carolyn
Message was edited by: Carolyn

Why cant I add songs in my itunes library. I can still add movies but not music, Why cant I add songs in my itunes library. I can still add movies but not music

Recently, I can no longer add songs in my itunes. I can delete it or move the songs into playlist but adding songs doesn't work anymore. I can still add photos and movies but not music. Please help me solve this issue.

I have a master iTunes file that contains all the music that I or my children have bought and then my own collection within the file. That song, 'Mercy, Mercy Me/I Want You' is gone from both lists
Nabitnak, Not sure what kind of master file you are keeping, but the song file is probably in your backup.
Why is that song not available on iTunes? I can get it on Amazon.
The iTunes Store, like any retailer, does not have 100% of all existing items. But anyway, if you can buy it on one store, it hardly matters why another store does not have it.
The coincidence of my missing song and iTune's missing the same song is beyond suspicious.
Maybe, although if you have a backup it should be there.
To address the other part of your question, "I can find it on You Tube, why not iTunes?": Youtube has content that is uploaded by users. Music retailers such as iTunes have content that they are licensed to sell as downloads. The two things have nothing to do with each other.

Can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

See http://kb.mozillazine.org/Links_to_local_pages_do_not_work

HT3387 When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html

Password works for login but not for the Adobe CC Desktop application

Password works for login but not for the Adobe CC Desktop application

Please refer to http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
ou can try deleting OPM.DB from steps below and try again.
Mac OS: You can locate the OPM.db file in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion. - http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html
Windows: You can locate the OPM.db file in the :\Users\\AppData\Local\Adobe\OOBE folder. To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7. -http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-ex tensions.html
3) update to the latest version of the Creative Cloud app.
Also we would like few more details:
When has this issue started occurring, was this after installation of any specific adobe product.
On which platform are you seeing this.
Also we would like to know if after above steps this issue occurs ever again in future.
You can refer to http://forums.adobe.com/thread/1239510
Regards,
Rajshree

HT4557 Does home sharing work for apps? The instructions make it sound as though home sharing really only allows you to stream content.

Does home sharing work for apps? My young son received iPad mini for Christmas, and I don't want him to have to repurchase the games and other raps I'd already bought for him that are resident on my iPad.

does Home Sharing allow you to copy any item begtween libraries, including CDs you have ripped yourself
It certainly allows you to copy ripped CDs. Just did that myself last week.

Can't FaceTime anymore? iPad states wifi connected and iPhone 4 states not connected? I have wireless in my home? Not sure what happened. Password works for iPad but not on phone?

iPhone won't connect to wifi. iPad is connected. Password working on iPad but not on phone. Can't upload software update of IOS 7.1 because phone not connecting to wifi?

Connect iPhone to computer and open iTunes. You will be prompted to update to iOS 7.0. Keep your phone connected until the update is finished.

TS2972 Since upgrading Apple TV to 5.1, home sharing works for 2 minutes

My setup has been working for ages, but ever since I upgraded my living room Apple TV to 5.1, it looses it's connection to home sharing after 2 minutes.
Running OS-X 10.7.3 with iTunes 10.6. Netgear N600 (WNDR7300 v2) router on Comcast.
This is happening with newly ripped as well as older ripped movies that I've purchased and converted using local tools, all stored locally on my Mac.
I first started experiencing this with my setup today, where I'd play a movie and then 2 minutes later, it would quit and my computer would no longer appear in the Apple TV computers list. I then go to my Mac, turn off Home Sharing, then turn it back on - and viola, it's back again - for two more minutes.
I had updated my Netgear from 10.0.0.8 to 10.0.0.12 recently, but have since reversed that upgrade - the issue remains.
I've tested this also by using my remote app from my iphone, and again, the connection appears okay until I start using it - then after 2 minutes of playback, it loses its connection. Is iCloud cutting off my iTunes on purpose? is Comcast? I have no idea what's going on to cause this.

Okay, so here's what I've found so far:
So I've done a number of tests on both my Apple TV's - the bedroom unit worked fine - it wirelessly connected to a cheap wifi-N AP (netgear $20 refurb from Microcenter) and it was upgraded by plugging directly into my Mac using a USB cable.
My living room unit, experiencing this issue, was plugged into an ethernet port and was upgraded through the IOS update feature. Any movie played through Home Sharing would fail after 2-3 minutes. In some cases, like with ******* 3D, I couldn't even finish watching the titles of the film before losing the connection.
This was happening on all my Home Sharing setups - both on the PC and the Mac that have libraries their share - both before and after upgrading to the latest iTunes on both.
I tried resetting the living room unit by plugging it into the iTunes and doing a factory restore. Once it was done, I put it back online - and connected it to the same WiFi as the bedroom unit. All tests passed. Was easily able to play things that couldn't stream before the latest update.
Once I plugged in the ethernet cable, it shut down the WiFi link and then started exhibiting the connection drop once again.
I then unplugged ethernet, re-connected to that AP and have been working since. Nothing in the packet capture I have shows what happens to the connection - I see lots of DAAP protocol going back and forth - then out of nowhere, the Apple TV starts pouring out a pile of RST packets and that's when the connection drops. In order to look at this more closely, I'd have to put a sniffer on the LAN and run this through a network switch that has packet capture abilities - not something I possess at the moment.
For now I'd advise that folks run wireless or wireless through a third gateway if you can.
Cheers!

Why does my app store account tell me that my payment method does not match my bank's records. my card is valid and works for iTunes but not the app store.

While trying to change my Credit Card info: The app store tells me that my payment method information does not match my bank records and to try again or enter a new payment method. My CC is valid and its the same CC ive had for a while. This CC info works for iTunes but is not being accepted for the App store.I have changed this info online but cannot change it on my iPhone. Can anyone tell me what i need to do?

Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

Table of Contents page numbers works for PDF but not for other formats

Hi,
I followed exactly was indicated here regarding creation of TOC.
http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T421739T481157.htm
The page numbers generated correctly for PDF but not for RTF, HTML and XLS.
(HTML and XLS are understandably not paginated in nature but why not in RTF?)
Tried to make the simplest example work, with 2 headings each on a separate page. Doesn't work on either MSWord 2003 or 2007.
What am I doing wrong?
Regards,
Jarell
Edited by: Jarell on Jan 11, 2012 8:08 PM

Hi Kavipriya,
What is your email address? I have attached a file in Oracle Metalink, under SR 3-5172030861. named test_toc.rtf
You may use any xml because the template does not use any dynamic binding of values.
The template is basically 2 pages, the TOC in the 1st page. First TOC item (Heading 1) is in Page 1, and Second TOC item is in Page 2.
So the end result should be (PDF result from BI Publisher):
First TOC Item .................. 1
Second TOC Item ............. 2
But for RTF it outputs:
First TOC Item .................. 0
Second TOC Item ............. 0
And after doing Print Preview (once or twice)
First TOC Item .................. Error in Bookmark
Second TOC Item ............. Error in Bookmark
Hope this is detailed enough to illustrate the problem.
Edited by: Jarell on Jan 17, 2012 10:24 PM

Tiger Server: Default MySQL works for phpMyAdmin but not command line ? ? ?

Greetings all,
I followed the excellent instructions at
http://discussions.apple.com/thread.jspa?threadID=132783&tstart=0
on upgrading PHP to version 5 and getting (the preinstalled) MySQL setup with phpMyAdmin
I can connect through the phpMyAdmin, create new dbs, etc. Problem is that now I CAN'T connect from the command line. (I originally set my new root password from the command line and that's the last time I could connect from there!
Now I get the dreaded ERROR 2002 when I attempt:
/usr/bin/mysql -h localhost -u root -p
If I use the IP address or hostname instead of "localhost" (after -h) I get a ERROR 2003. Dropping the -h and hostname from the line above still gets me a ERROR 2002.
My phpMyAdmin config is a connect type "TCP" not socket, which might be one reason it works and the command line doesn't, but I still don't know where I've gone wrong.
My /var/mysql/* is all owned by mysql and group www.
I'm finding lots of people asking about the ERROR 2002, but not finding any solutions (particularly for Tiger Server). I'd prefer to use the preinstalled MySQL to installing a new installation (the thread referenced above says upgrading or removing the MySQL installation is too hard to do) and there has GOT to be a reasonable explanation for why it works with phpMyAdmin, but not the command line.
Thanks in advance for any replies!
Many Mac OS X (10.4.3)

You know what? I think when I started mysql_safe, I did it with sudo. Maybe that is my problem?
If so, what user do I want to start it as? I've seen one suggestion of doing this:
./bin/mysqld_safe --user=mysql &

Home sharing works for movies but not music?

Similar Messages

Maybe you are looking for