Home switch from panasonic
hi,
can someone please advice me on whether this Limit switch from Panasonic is suitable for my UMI 7764 and PXI 7332? i cant figure out which Information is relevant for my choice? here is the data sheet:
http://www.panasonic-electric-works.com/peweu/en/downloads/ds_63030_2700_en_az7.pdf
Thanks
Attachments:
ds_63030_2700_en_az7.pdf 310 KB
Kenzi,
as this is a mechanical home switch, it will work with the UMI 7764. Please refer to the UMI's manual for the wiring diagram and to the 7332's manual for information about the limit switch input circuitry.
In short: just connect the switch between the switch input of the UMI and GND. The switch input is pulled up internally on the 7332 to +5 V, so no external power connection is required.
Kind regards,
Jochen Klier
National Instruments
Similar Messages
-
I have CC for work and my PC to do work at home. At home I switched from PC to Mac this weekend. I want to redownload my apps for the iMac but it's telling my I'm using a 30 day free trial. I need to discontinue the PC apps and download to the new computer.
YOu need to sign out of the PC thru the CC manager and then sign in on the Mac.
-
HT5624 switch from US store to my home-country store
every time I try to buy sth in appStopre the application says I need to switch from US store to my home-country store. how to do it?
Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region...change here.
-
Newsstand suppresses the home screen from the app switcher view when the home button is pressed?
Newsstand suppresses the home screen from the app switcher view when the home button is pressed.
Has anyone else seen this before, I needed to lock and unlock iPad to get back to the home screen.Aloha Ethan. Fortunately it's working as designed, but you'd never believe how many people wanted to argue with me smply because it worked differently. Can't please everybody I guess. Bob.
-
I switched from a 4S to a 5, everything updated to the cloud and resync-ed to my computer nicely except for my calender.
I have all of my data going back to 2010, however from march 2012 to now i only have the 'home' calender options showing up. All of my 'work' appointments are completely gone, and i can't find them anywhere. Is there a setting I should check out? or are they completely gone?- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
Will iPad2 auto switch from 3G to Wifi when I come home or will it stay on 3G until 3G is turned off? Doesn't iPhone do it automatically?
If there is a useable wifi network (e.g. if it's a password protected network then the iPad knows the password) then that will be used in preference to 3G - you should be able to tell by the symbol top left of the screen as to whether it's on wifi or 3G.
-
How can I switch from auto_login wallet to password-protected encryption wallet in 12c ?
How can I switch from auto_login wallet to password-protected encryption wallet in 12c
--Now the autologin wallet is in effect
SQL> select * from v$encryption_wallet
2 ;
WRL_TYPE
WRL_PARAMETER
STATUS WALLET_TYPE WALLET_OR FULLY_BAC
CON_ID
FILE
/acfs3/wallet
OPEN AUTOLOGIN SINGLE NO
0
--I need to export the keys and it informs me to use password-based keystore
SQL> ADMINISTER KEY MANAGEMENT export KEYS with secret tde_1234 to '/home/oracle/dumpdir/orapdba.wallet' IDENTIFIED BY "tde_1234";
ADMINISTER KEY MANAGEMENT export KEYS with secret tde_1234 to '/home/oracle/dumpdir/orapdba.wallet' IDENTIFIED BY "tde_1234"
ERROR at line 1:
ORA-28417: password-based keystore is not open
--So I try to close the autologin keystore and open the password-based keystore, but the autologin keystore cannot be closed
SQL> administer key management set keystore close;
administer key management set keystore close
ERROR at line 1:
ORA-28365: wallet is not open
SQL> administer key management set keystore open identified by "tde_1234";
administer key management set keystore open identified by "tde_1234"
ERROR at line 1:
ORA-28354: Encryption wallet, auto login wallet, or HSM is already open
So My question is
How to switch from auto_login keystore to password-protected keystore ?Remove the cwallet.sso file and check the wallet status in v$encryption_wallet.
If it is not opened, try to open it with administer key statement.
Check the status again. -
I am a long time Mac user, running my business on an apple platform since 1984. I currently use a 17" MacBook Pro as my primary computer for work. when it is at work it is plugged in via thunderbolt to my monitor and a one tb back up drive. I use time machine to back up the laptop to the one tb drive. When I go home, I take the laptop with me and use another drive at home as a back up. This way I have redundant back ups, in two separate locations. I have been doing this for years, and Time machine has worked flawlessly, automaticity switching from one drive to another.
I recently switched to Maverics, and got a new drive for home. Now whether I am at home or at work, time machine fails to automatically back up. It will alert me every hour that backups cannot be completed, and I must go to the time machine control panel and manually select a drive and click, "back up now". I also see an alert that says "waiting to complete first back up" even though each backup has been completed.
This is quite annoying, and sometimes embarrassing. When giving lectures in large venues, the backup failure alert appears and shuts down my keynote presentation (again, something new since switching to Maverics and the new WD drive.
I have reformatted the WD drive, and also spent time trying to change parameters in the time machine control panel, but so far no luck.
Any advice out there?Time machine requires a GUID partion scheme, as well as a Mac OS X extended, journaled Volume.
It needs these to correctly:
1) copy the files
2) run a modified spotlight index pass on the files
Both are required to complete a abckup, and most new drives do not conme this way from the factory. -
I've had it for a year now.
I have the most current OS. I snyc it to my itunes 2-3 times a week. It is only about 25% full. It stalls (I don't know if I would call it freezing) between trying to switch from app to app. I either have to let it sit there for a few minutes, or turn it all the way off and turn it back on.
And yes, I know to press the home button twice to get the bottom part activated. That's not working. I'm not sure if this is a common thing, or what with iphone 4's.
Anyone got any ideas?Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?! -
Switching from Entourage to ical, mail, and address book- duplications?
I am tired of the slowness of Entourage and was thinking of switching to all of the native mac programs. Any suggestions or comments on whether this is a good idea or not?
Also, will all of my information be duplicated. I have about 3 gigs of information and I don't want to needlessly store it if I don't need to. Can I get some advice on where to find and extract that information from the entourage program so I am not eating up disc space unnecessarily.
Thank you.Three weeks ago I switched from Entourage and Palm Desktop to Apple mail, address book and ical. It was a tad painful because I ended up with a lot of duplicates as I had email and some contact info in Entourage and several thousand contacts in Palm Desktop.
However after a couple of solid nights sorting out the duplicates all the contact info for each person is now in one place.
Word of warning though when you are checking address book entries make sure you keep backing up the changes (File - Backup address book) because for some inexplicable reason a couple of times all the entries in address book vanished.
Also the check for duplicates option in address book might be great for some but for me it created contacts that had their addresses and phone numbers duplicated several times.
After initial teething problems (getting used to the different programs) I am now pretty happy with the changeover. I am ecstatic to not be seeing the constant Entourage error message of 'your database is damaged and needs to be rebuilt' which entourage kept throwing at me (even after repeated rebuilds).
I have a Palm Treo and Address Book and iCal sync fine with that as well (after installing the conduit).
You'll also find in mail that you can't do as much snazzy formatting as you could with Entourage (ie numbered lists and bullet points) but hopefully Apple will address that in later updates. In the meantime if I'm desperate for formatting I write the email in rtf and paste it across complete with bluet points.
Sorry to drone on but wanted to give you some moral support.
Oh by the way the entourage data is stored in Home folder - Documents - Microsoft User Data - Office 2004 Identities - main identity - database (almost need a compass and flashlight to find it). To be on the safe side burn it to a dvd just in case and then trash it and all it's little friends (rules, lists, signatures and the other main identity folders.
Good luck -
Switching from FCP7 to CS6! Two BIG questions I can't figure out...
Hello!
So I'm running CS6.01 on my new 27" iMac running OS 10.6.8. I'm excited to be transitioning over to CS6 after the last 6 or 7 years using Final Cut Pro. But I don't have time to mess around as I'm in the middle of projects so here are my 2 main questions right off the bat:
First I should say that I edit AVCHD footage shot from Panasonic HMC150's. I shoot Weddings. About 35-40/year. In FCP, my workflow was...shoot EVERYTHING at 720p60 and TRANSCODE it in FCP to ProRes Proxy. Then I'd CONFORM it to 23.98 (using Cinema Tools which takes all of about 30 seconds to do 400 clips) so that it was all in slow-mo looking smooth and beautiful. Then, I'd drop it all on the timeline and edit. Most clips I need in slow-mo but the ones I don't (eg. the Ceremony) I just speed up 250% and it's full speed. Then at the end of editing I'd batch capture and re-transcode to ProRes 422 and I'm done. It all looks great.
Here's the important thing:
I edit on a 23.98fps timeline that way it maintains a bit of the film-stuttery look instead of the video/soap-opera look of 60fps footage and also it naturally has everything at 40% smooth slow-mo. I dont want that video/soap opera look that I would get if I edited my 60p footage on a 60p timeline! This is important to me.
1) I know with CS6 I don't "have" to transcode, but I can just ingest and edit the AVCHD files natively, right? Well, okay, but if I do that will dropping those 60p clips on a 23.98fps timeline give me the same look I got when I use to conform the footage first? Specifically is it just as smooth to just change the speed of a 60p clip by 40% and drop it on a 24p timeline? And what about the stuff I want at full speed...if I drop that 60p footage right on the timeline and don't speed it up it will be full speed but will it look the same as my conformed footage looked when sped up in FCP? Please elaborate for me.
2) Audio. When I bring in audio clips from my 2 cameras each track has 2 separate audio feeds (eg. 2 wireless mics, a shotgun mic, an internal mic). CS6 brings them in on one track. I read up where I need to "Modify the clips" and adjust the Audio Channels so that there are 2 tracks. Then I'm guessing I just make one track the left track and one the right? This seems to work and makes a separate track that is balanced to the center and has each of the 4 channels as its own separate adjustable track. Am I doing that right? And more importantly...my real question...if I'm scrubbing thru the timeline and I double click on one of the audio tracks to bring up the waveform and edit, sometimes it doesn't come up where I stopped in the timeline. Unless the clips are linked. But don't I have to unlink them to edit them individually? So how do I do this where I can be in the timeline, watching the video and when I hear something I want to adjust, I stop the video and quickly access the individual track (eg. one of the wireless mics) to make the adjustments?
Hope my questions make sense. Thanks SO much in advance for all your help! It took me like 20 minutes to figure out how to post a question but now that I've done it I'm very excited that I've got it out there and hopefully I'll get past my current workflow roadblocks. Thank you!!!!!!!Jim Simon wrote:
I'd recommend a different work flow. Shoot what you want at full speed in 720p/24. Shoot what you want in slow motion at 720p/60...
I would respectfully disagree with Jim's statement and endorse the OP's technique of shooting at 60 fps for purposes of playback at both normal speed and slow motion at 24 fps.
I think the more creative choices you give yourself in post the better.
Since you (DMH79) are using the same footage for both normal speed and slow motion playback, I think your way is definitely the way to go as long as you are happy with the resolution.
Even if you were not using the same clips at different speeds, I would still disagree with the opinion that you should be able to predict in advance which shots from a hectic live action event such as a wedding you will want to use in slow motion. In fact, I would go so far as to say that it would be impossible, no matter how easy it is to switch modes.
Given that slow motion is a reasonable priority for you, I think there is much less to be gained by shooting at 24 fps for clips that you might use at normal speed than by giving yourself the option of both normal speed and slow motion with a 60 fps recording. (To me the bigger tradeoff is not being able to shoot 1080p at 60 fps, which I think applies to your HMC150.)
I love the look of 24p and will shoot that way for scripted work or if I am absolutely certain that I won't want to use a single shot in slow motion, but for many live events, my preference is to shoot at 720p60, shutter angle 180, for eventual output at 30 fps. I edit in a 60 fps timeline in Premiere, but I export at 30 fps. I find that exporting at 30 fps in combination with the 1/120 shutter speed removes much of the soap opera look (a great description, by the way), but there is no jerkiness in normal speed clips because 30 is exactly half of 60. Media Encoder simply removes every other frame during export. Yet, this allows me to drop any clip to 50% speed and achieve perfectly matched, silky smooth slow motion.
You probably prefer the 40% speed slow motion and added stutter of 24 fps, but regardless, if you do find that controlling the speed via Speed/Duration is equal in quality to conforming, you may want to consider cutting in a 60 fps timeline and giving yourself the option to export at either 24 or 30 fps.
Your last post on this topic was from a few months ago. I also switched from FCP7 and would be very curious to know what you have discovered! -
ios 6, my wifi doesnt work
even after switching wifi on and off
as well as removing saved wifi spots
and tried switching from manual to auto
it works intermittently after these changes are made, but still shuts off.
i have ios 6 on both the iPhone 4 & the Iphone 5.
my router at home is D-Link router
please help!You have the same problem in two mobiles? Uou....
I have had used D Link router before, and I faced problems to connect my computer.
Now I bought Netgear, and it shows strongly better than the f.... D Link...
Try:
Settings>>WiFi, and then turn off Ask for Conection;
Or:
Settings>>Privacity, be sure the Location Service is turn on;
Or:
In Settings>>General>>Reset, select "Reset all Adjusts". (Sorry, but it will change some personal adjustments, but will not delete anything at all) -
Trying to switch from nvidia to nouveau; startx freezes system
I'm having high cpu issues, possibly related to nvidia and want to switch to nouveau to test this out. I followed the Arch Wiki for nouveau but am having issues being able to startx. My process:
- Logout of openbox
- Remove nvidia stuff:
# pacman -Rsc nvidia nvidia-utils opencl-nvidia
# pacman -S xf86-video-nouveau
Installing nouveau also prompted the removal of nvidia-libgl and replaced it with mesa-libgl, as well as the installation of nouvea-dri.
- Removed my existing monitor config file:
# mv /etc/X11/xorg.conf.d/10-monitor.conf /etc/X11/xorg.conf.d/10-monitor.conf.bk
- Verified that I have no modeset options specified to kernel options via syslinux, nor blacklisting of nouveau in /etc/modprobe.d/ files.
$ cat /etc/modprobe.d/modprobe.conf
# /etc/modprobe.d/modprobe.conf
blacklist uvcvideo
blacklist pcspkr
$ ls /etc/X11/xorg.conf.d/
10-evdev.conf 10-monitor.conf.bk 10-quirks.conf 50-synaptics.conf
Nothing related to monitors or screens in 10-evdev, 10-quirks or 50-synaptics, and the 10-monitor.conf.bk file has the following contents (just in the event it *is* picked up by Xorg):
$ cat /etc/X11/xorg.conf.d/10-monitor.conf.bk
Section "Monitor"
Identifier "Monitor0"
ModelName "LGD"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
# Option "Enable" "True"
# Option "PreferredMode" "1600x900"
EndSection
Section "Device"
Identifier "Device0"
Driver "nouveau"
# Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro FX 1800M"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x900"
EndSubSection
# Option "SLI" "Auto"
# Option "AddARGBGLXVisuals" "True"
EndSection
- Reboot
I am at work and have my computer docked. Nouveau seemed to be active, observed by the fact that it auto-switched to KMS during boot. It also picked up my external monitor, which was off, and started duplicating the display on my external monitor and laptop during text boot (which nvidia does not do). The laptop had what I'll call "screen artifacts" on the lower right (white lines, jumbled pixels) after switching to KMS, but not a huge deal. I went to startx and it just froze after spitting out the various initialization lines. I have to hard kill and reboot. From there, I uninstall nouveau, re-install nvidia (which replaces mesa-libgl with nvidia-libgl), and reboot again to a working system.
Any suggestions?
Last edited by jwhendy (2013-10-24 16:36:15)Here's the recent Xorg.log:
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 102.581] X Protocol Version 11, Revision 0
[ 102.581] Build Operating System: Linux 3.11.1-1-ARCH x86_64
[ 102.581] Current Operating System: Linux bigBang 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
[ 102.581] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda3:root ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 102.581] Build Date: 08 October 2013 08:48:10PM
[ 102.581]
[ 102.581] Current version of pixman: 0.30.2
[ 102.581] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 102.581] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 102.582] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 24 19:46:30 2013
[ 102.599] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 102.618] (==) No Layout section. Using the first Screen section.
[ 102.618] (==) No screen section available. Using defaults.
[ 102.618] (**) |-->Screen "Default Screen Section" (0)
[ 102.618] (**) | |-->Monitor "<default monitor>"
[ 102.618] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 102.618] (==) Automatically adding devices
[ 102.618] (==) Automatically enabling devices
[ 102.618] (==) Automatically adding GPU devices
[ 102.666] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 102.666] Entry deleted from font path.
[ 102.666] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 102.667] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 102.667] Entry deleted from font path.
[ 102.667] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 102.667] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 102.667] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 102.667] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 102.667] (II) Loader magic: 0x7fdc20
[ 102.667] (II) Module ABI versions:
[ 102.667] X.Org ANSI C Emulation: 0.4
[ 102.667] X.Org Video Driver: 14.1
[ 102.667] X.Org XInput driver : 19.1
[ 102.667] X.Org Server Extension : 7.0
[ 102.667] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 102.671] (--) PCI:*(0:1:0:0) 10de:0cbc:103c:1521 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 102.671] Initializing built-in extension Generic Event Extension
[ 102.672] Initializing built-in extension SHAPE
[ 102.672] Initializing built-in extension MIT-SHM
[ 102.672] Initializing built-in extension XInputExtension
[ 102.672] Initializing built-in extension XTEST
[ 102.672] Initializing built-in extension BIG-REQUESTS
[ 102.672] Initializing built-in extension SYNC
[ 102.672] Initializing built-in extension XKEYBOARD
[ 102.673] Initializing built-in extension XC-MISC
[ 102.674] Initializing built-in extension SECURITY
[ 102.675] Initializing built-in extension XINERAMA
[ 102.676] Initializing built-in extension XFIXES
[ 102.677] Initializing built-in extension RENDER
[ 102.678] Initializing built-in extension RANDR
[ 102.679] Initializing built-in extension COMPOSITE
[ 102.680] Initializing built-in extension DAMAGE
[ 102.681] Initializing built-in extension MIT-SCREEN-SAVER
[ 102.682] Initializing built-in extension DOUBLE-BUFFER
[ 102.683] Initializing built-in extension RECORD
[ 102.684] Initializing built-in extension DPMS
[ 102.684] Initializing built-in extension X-Resource
[ 102.685] Initializing built-in extension XVideo
[ 102.686] Initializing built-in extension XVideo-MotionCompensation
[ 102.687] Initializing built-in extension XFree86-VidModeExtension
[ 102.688] Initializing built-in extension XFree86-DGA
[ 102.689] Initializing built-in extension XFree86-DRI
[ 102.690] Initializing built-in extension DRI2
[ 102.690] (II) LoadModule: "glx"
[ 102.691] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 102.719] (II) Module glx: vendor="X.Org Foundation"
[ 102.719] compiled for 1.14.3, module version = 1.0.0
[ 102.719] ABI class: X.Org Server Extension, version 7.0
[ 102.719] (==) AIGLX enabled
[ 102.721] Loading extension GLX
[ 102.721] (==) Matched nouveau as autoconfigured driver 0
[ 102.721] (==) Matched nvidia as autoconfigured driver 1
[ 102.721] (==) Matched nv as autoconfigured driver 2
[ 102.721] (==) Matched nouveau as autoconfigured driver 3
[ 102.721] (==) Matched nvidia as autoconfigured driver 4
[ 102.721] (==) Matched nv as autoconfigured driver 5
[ 102.721] (==) Matched vesa as autoconfigured driver 6
[ 102.721] (==) Matched modesetting as autoconfigured driver 7
[ 102.721] (==) Matched fbdev as autoconfigured driver 8
[ 102.721] (==) Assigned the driver to the xf86ConfigLayout
[ 102.721] (II) LoadModule: "nouveau"
[ 102.721] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 102.751] (II) Module nouveau: vendor="X.Org Foundation"
[ 102.751] compiled for 1.14.2, module version = 1.0.9
[ 102.751] Module class: X.Org Video Driver
[ 102.751] ABI class: X.Org Video Driver, version 14.1
[ 102.751] (II) LoadModule: "nvidia"
[ 102.765] (WW) Warning, couldn't open module nvidia
[ 102.765] (II) UnloadModule: "nvidia"
[ 102.765] (II) Unloading nvidia
[ 102.765] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 102.765] (II) LoadModule: "nv"
[ 102.765] (WW) Warning, couldn't open module nv
[ 102.765] (II) UnloadModule: "nv"
[ 102.765] (II) Unloading nv
[ 102.765] (EE) Failed to load module "nv" (module does not exist, 0)
[ 102.765] (II) LoadModule: "vesa"
[ 102.765] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 102.776] (II) Module vesa: vendor="X.Org Foundation"
[ 102.776] compiled for 1.14.0, module version = 2.3.2
[ 102.776] Module class: X.Org Video Driver
[ 102.776] ABI class: X.Org Video Driver, version 14.1
[ 102.776] (II) LoadModule: "modesetting"
[ 102.776] (WW) Warning, couldn't open module modesetting
[ 102.776] (II) UnloadModule: "modesetting"
[ 102.776] (II) Unloading modesetting
[ 102.776] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 102.776] (II) LoadModule: "fbdev"
[ 102.776] (WW) Warning, couldn't open module fbdev
[ 102.776] (II) UnloadModule: "fbdev"
[ 102.776] (II) Unloading fbdev
[ 102.776] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 102.776] (II) NOUVEAU driver
[ 102.776] (II) NOUVEAU driver for NVIDIA chipset families :
[ 102.776] RIVA TNT (NV04)
[ 102.776] RIVA TNT2 (NV05)
[ 102.776] GeForce 256 (NV10)
[ 102.776] GeForce 2 (NV11, NV15)
[ 102.776] GeForce 4MX (NV17, NV18)
[ 102.776] GeForce 3 (NV20)
[ 102.776] GeForce 4Ti (NV25, NV28)
[ 102.776] GeForce FX (NV3x)
[ 102.776] GeForce 6 (NV4x)
[ 102.776] GeForce 7 (G7x)
[ 102.776] GeForce 8 (G8x)
[ 102.776] GeForce GTX 200 (NVA0)
[ 102.776] GeForce GTX 400 (NVC0)
[ 102.776] (II) VESA: driver for VESA chipsets: vesa
[ 102.776] (++) using VT number 1
[ 102.776] (II) [drm] nouveau interface version: 1.1.1
[ 102.777] (WW) Falling back to old probe method for vesa
[ 102.777] (II) Loading sub module "dri2"
[ 102.777] (II) LoadModule: "dri2"
[ 102.777] (II) Module "dri2" already built-in
[ 102.777] (--) NOUVEAU(0): Chipset: "NVIDIA NVA3"
[ 102.777] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 102.777] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 102.777] (==) NOUVEAU(0): RGB weight 888
[ 102.777] (==) NOUVEAU(0): Default visual is TrueColor
[ 102.777] (==) NOUVEAU(0): Using HW cursor
[ 102.777] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 102.777] (==) NOUVEAU(0): Page flipping enabled
[ 102.777] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 102.845] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[ 102.950] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 103.056] (II) NOUVEAU(0): Output DP-2 has no monitor section
[ 103.056] (II) NOUVEAU(0): Output eDP-1 has no monitor section
[ 103.163] (II) NOUVEAU(0): Output DP-3 has no monitor section
[ 103.184] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 103.211] (II) NOUVEAU(0): EDID for output LVDS-1
[ 103.211] (II) NOUVEAU(0): Manufacturer: CMO Model: 1595 Serial#: 0
[ 103.211] (II) NOUVEAU(0): Year: 2009 Week: 12
[ 103.211] (II) NOUVEAU(0): EDID Version: 1.3
[ 103.211] (II) NOUVEAU(0): Digital Display Input
[ 103.211] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 103.211] (II) NOUVEAU(0): Gamma: 2.20
[ 103.211] (II) NOUVEAU(0): No DPMS capabilities specified
[ 103.211] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 103.211] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 103.211] (II) NOUVEAU(0): redX: 0.610 redY: 0.343 greenX: 0.342 greenY: 0.581
[ 103.211] (II) NOUVEAU(0): blueX: 0.162 blueY: 0.083 whiteX: 0.313 whiteY: 0.329
[ 103.211] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 103.211] (II) NOUVEAU(0): Supported detailed timing:
[ 103.211] (II) NOUVEAU(0): clock: 107.8 MHz Image Size: 344 x 193 mm
[ 103.211] (II) NOUVEAU(0): h_active: 1600 h_sync: 1626 h_sync_end 1686 h_blank_end 1892 h_border: 0
[ 103.211] (II) NOUVEAU(0): v_active: 900 v_sync: 909 v_sync_end 919 v_blanking: 949 v_border: 0
[ 103.212] (II) NOUVEAU(0): N156O6-L01
[ 103.212] (II) NOUVEAU(0): CMO
[ 103.212] (II) NOUVEAU(0): N156O6-L01
[ 103.212] (II) NOUVEAU(0): EDID (in hex):
[ 103.212] (II) NOUVEAU(0): 00ffffffffffff000daf951500000000
[ 103.212] (II) NOUVEAU(0): 0c130103802213780a7b959c57579429
[ 103.212] (II) NOUVEAU(0): 15505400000001010101010101010101
[ 103.212] (II) NOUVEAU(0): 0101010101011c2a4024618431301a3c
[ 103.212] (II) NOUVEAU(0): 9a0058c110000018000000fe004e3135
[ 103.212] (II) NOUVEAU(0): 364f362d4c30310a2020000000fe0043
[ 103.212] (II) NOUVEAU(0): 4d4f0a202020202020202020000000fe
[ 103.212] (II) NOUVEAU(0): 004e3135364f362d4c30310a2020001c
[ 103.212] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[ 103.212] (II) NOUVEAU(0): Modeline "1600x900"x60.0 107.80 1600 1626 1686 1892 900 909 919 949 -hsync -vsync (57.0 kHz eP)
[ 103.212] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 103.212] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 103.212] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 103.212] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 103.212] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 103.212] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 103.212] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 103.316] (II) NOUVEAU(0): EDID for output DP-1
[ 103.423] (II) NOUVEAU(0): EDID for output DP-2
[ 103.423] (II) NOUVEAU(0): EDID for output eDP-1
[ 103.530] (II) NOUVEAU(0): EDID for output DP-3
[ 103.550] (II) NOUVEAU(0): EDID for output VGA-1
[ 103.550] (II) NOUVEAU(0): Output LVDS-1 connected
[ 103.550] (II) NOUVEAU(0): Output DP-1 disconnected
[ 103.550] (II) NOUVEAU(0): Output DP-2 disconnected
[ 103.551] (II) NOUVEAU(0): Output eDP-1 disconnected
[ 103.551] (II) NOUVEAU(0): Output DP-3 disconnected
[ 103.551] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 103.551] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 103.551] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1600x900
[ 103.551] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 103.551] (--) NOUVEAU(0): Virtual size is 1600x900 (pitch 0)
[ 103.551] (**) NOUVEAU(0): Driver mode "1600x900": 107.8 MHz (scaled from 0.0 MHz), 57.0 kHz, 60.0 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "1600x900"x60.0 107.80 1600 1626 1686 1892 900 909 919 949 -hsync -vsync (57.0 kHz eP)
[ 103.551] (**) NOUVEAU(0): Driver mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz e)
[ 103.551] (**) NOUVEAU(0): Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz e)
[ 103.551] (**) NOUVEAU(0): Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz e)
[ 103.551] (**) NOUVEAU(0): Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz e)
[ 103.551] (**) NOUVEAU(0): Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz e)
[ 103.551] (**) NOUVEAU(0): Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz e)
[ 103.551] (**) NOUVEAU(0): Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 103.551] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz e)
[ 103.551] (==) NOUVEAU(0): DPI set to (96, 96)
[ 103.551] (II) Loading sub module "fb"
[ 103.551] (II) LoadModule: "fb"
[ 103.551] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 105.504] (II) Module fb: vendor="X.Org Foundation"
[ 105.504] compiled for 1.14.3, module version = 1.0.0
[ 105.504] ABI class: X.Org ANSI C Emulation, version 0.4
[ 105.504] (II) Loading sub module "exa"
[ 105.504] (II) LoadModule: "exa"
[ 105.504] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 105.508] (II) Module exa: vendor="X.Org Foundation"
[ 105.508] compiled for 1.14.3, module version = 2.6.0
[ 105.508] ABI class: X.Org Video Driver, version 14.1
[ 105.508] (II) Loading sub module "shadowfb"
[ 105.508] (II) LoadModule: "shadowfb"
[ 105.508] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 105.518] (II) Module shadowfb: vendor="X.Org Foundation"
[ 105.518] compiled for 1.14.3, module version = 1.0.0
[ 105.518] ABI class: X.Org ANSI C Emulation, version 0.4
[ 105.518] (II) UnloadModule: "vesa"
[ 105.518] (II) Unloading vesa
[ 105.518] (--) Depth 24 pixmap format is 32 bpp
[ 105.521] (II) NOUVEAU(0): Opened GPU channel 0
[ 105.547] (II) NOUVEAU(0): [DRI2] Setup complete
[ 105.547] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 105.547] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 108.224] (II) EXA(0): Driver allocated offscreen pixmaps
[ 108.224] (II) EXA(0): Driver registered support for the following operations:
[ 108.224] (II) Solid
[ 108.224] (II) Copy
[ 108.224] (II) Composite (RENDER acceleration)
[ 108.224] (II) UploadToScreen
[ 108.224] (II) DownloadFromScreen
[ 108.224] (==) NOUVEAU(0): Backing store disabled
[ 108.224] (==) NOUVEAU(0): Silken mouse enabled
[ 108.226] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 108.226] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 108.226] (==) NOUVEAU(0): DPMS enabled
[ 108.226] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 108.228] (--) RandR disabled
[ 142.503] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 142.503] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 142.504] (II) AIGLX: enabled GLX_ARB_create_context
[ 142.504] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 142.504] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 142.504] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 142.504] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 142.505] (II) AIGLX: Loaded and initialized nouveau
[ 142.505] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 159.503] (II) NOUVEAU(0): NVEnterVT is called.
[ 159.532] (II) NOUVEAU(0): Setting screen physical size to 423 x 238
[ 159.532] resize called 1600 900
[ 160.324] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 160.324] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 160.324] (II) LoadModule: "evdev"
[ 160.324] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 160.355] (II) Module evdev: vendor="X.Org Foundation"
[ 160.355] compiled for 1.14.3, module version = 2.8.2
[ 160.355] Module class: X.Org XInput Driver
[ 160.355] ABI class: X.Org XInput driver, version 19.1
[ 160.355] (II) Using input driver 'evdev' for 'Power Button'
[ 160.355] (**) Power Button: always reports core events
[ 160.355] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 160.355] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 160.355] (--) evdev: Power Button: Found keys
[ 160.355] (II) evdev: Power Button: Configuring as keyboard
[ 160.355] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 160.355] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 160.355] (**) Option "xkb_rules" "evdev"
[ 160.355] (**) Option "xkb_model" "pc104"
[ 160.355] (**) Option "xkb_layout" "us"
[ 160.392] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 160.392] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 160.392] (II) Using input driver 'evdev' for 'Video Bus'
[ 160.392] (**) Video Bus: always reports core events
[ 160.392] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 160.392] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 160.392] (--) evdev: Video Bus: Found keys
[ 160.392] (II) evdev: Video Bus: Configuring as keyboard
[ 160.392] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4/event4"
[ 160.392] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 160.392] (**) Option "xkb_rules" "evdev"
[ 160.392] (**) Option "xkb_model" "pc104"
[ 160.393] (**) Option "xkb_layout" "us"
[ 160.393] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 160.393] (II) No input driver specified, ignoring this device.
[ 160.393] (II) This device may have been added with another device file.
[ 160.394] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 160.394] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 160.394] (II) Using input driver 'evdev' for 'Sleep Button'
[ 160.394] (**) Sleep Button: always reports core events
[ 160.394] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 160.394] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 160.394] (--) evdev: Sleep Button: Found keys
[ 160.394] (II) evdev: Sleep Button: Configuring as keyboard
[ 160.394] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 160.394] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 160.394] (**) Option "xkb_rules" "evdev"
[ 160.394] (**) Option "xkb_model" "pc104"
[ 160.394] (**) Option "xkb_layout" "us"
[ 160.395] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 160.396] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[ 160.396] (II) No input driver specified, ignoring this device.
[ 160.396] (II) This device may have been added with another device file.
[ 160.396] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 160.396] (II) No input driver specified, ignoring this device.
[ 160.396] (II) This device may have been added with another device file.
[ 160.397] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 160.397] (II) No input driver specified, ignoring this device.
[ 160.397] (II) This device may have been added with another device file.
[ 160.397] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 160.397] (II) No input driver specified, ignoring this device.
[ 160.397] (II) This device may have been added with another device file.
[ 160.398] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 160.398] (II) No input driver specified, ignoring this device.
[ 160.398] (II) This device may have been added with another device file.
[ 160.398] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event10)
[ 160.398] (II) No input driver specified, ignoring this device.
[ 160.398] (II) This device may have been added with another device file.
[ 160.399] (II) config/udev: Adding input device HDA Intel MID Dock Headphone (/dev/input/event7)
[ 160.399] (II) No input driver specified, ignoring this device.
[ 160.399] (II) This device may have been added with another device file.
[ 160.399] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event8)
[ 160.399] (II) No input driver specified, ignoring this device.
[ 160.399] (II) This device may have been added with another device file.
[ 160.400] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event9)
[ 160.400] (II) No input driver specified, ignoring this device.
[ 160.400] (II) This device may have been added with another device file.
[ 160.400] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 160.400] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 160.401] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 160.401] (**) AT Translated Set 2 keyboard: always reports core events
[ 160.401] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 160.401] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 160.401] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 160.401] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 160.401] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 160.401] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 160.401] (**) Option "xkb_rules" "evdev"
[ 160.401] (**) Option "xkb_model" "pc104"
[ 160.401] (**) Option "xkb_layout" "us"
[ 160.402] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event11)
[ 160.402] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 160.402] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 160.402] (**) PS/2 Generic Mouse: always reports core events
[ 160.402] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event11"
[ 160.402] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[ 160.402] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[ 160.402] (--) evdev: PS/2 Generic Mouse: Found relative axes
[ 160.402] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[ 160.402] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[ 160.402] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 160.402] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 160.402] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 160.402] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 10)
[ 160.402] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[ 160.402] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 160.403] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 160.403] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 160.403] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 160.403] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
[ 160.403] (II) No input driver specified, ignoring this device.
[ 160.403] (II) This device may have been added with another device file.
[ 160.403] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[ 160.403] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 160.403] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 160.403] (II) LoadModule: "synaptics"
[ 160.403] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 160.415] (II) Module synaptics: vendor="X.Org Foundation"
[ 160.415] compiled for 1.14.1, module version = 1.7.1
[ 160.415] Module class: X.Org XInput Driver
[ 160.415] ABI class: X.Org XInput driver, version 19.1
[ 160.415] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 160.415] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 160.415] (**) Option "Device" "/dev/input/event17"
[ 160.503] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 160.503] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5600 (res 57)
[ 160.503] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4884 (res 123)
[ 160.503] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 160.503] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 160.503] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
[ 160.503] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 160.503] (**) Option "VertScrollDelta" "250"
[ 160.503] (**) Option "VertTwoFingerScroll" "on"
[ 160.504] (**) Option "HorizTwoFingerScroll" "off"
[ 160.504] (**) Option "TapButton1" "1"
[ 160.504] (**) Option "TapButton2" "2"
[ 160.504] (**) Option "TapButton3" "3"
[ 160.504] (**) Option "CoastingSpeed" "0"
[ 160.504] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 160.504] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 160.530] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input17/event17"
[ 160.530] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 160.530] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 160.530] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 160.530] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[ 160.531] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 160.531] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 160.531] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 160.531] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 160.531] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 160.531] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 160.531] (II) No input driver specified, ignoring this device.
[ 160.531] (II) This device may have been added with another device file.
[ 160.532] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[ 160.532] (II) No input driver specified, ignoring this device.
[ 160.532] (II) This device may have been added with another device file.
[ 160.532] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 160.532] (II) No input driver specified, ignoring this device.
[ 160.532] (II) This device may have been added with another device file.
[ 160.533] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event12)
[ 160.533] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 160.533] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 160.533] (**) HP WMI hotkeys: always reports core events
[ 160.533] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event12"
[ 160.533] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 160.533] (--) evdev: HP WMI hotkeys: Found keys
[ 160.533] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 160.533] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event12"
[ 160.533] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[ 160.533] (**) Option "xkb_rules" "evdev"
[ 160.533] (**) Option "xkb_model" "pc104"
[ 160.533] (**) Option "xkb_layout" "us"
[ 164.083] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 164.083] (II) NOUVEAU(0): NVLeaveVT is called.
[ 181.123] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 181.123] (II) NOUVEAU(0): NVEnterVT is called.
[ 181.179] (II) NOUVEAU(0): EDID vendor "CMO", prod id 5525
[ 181.179] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 181.179] (II) NOUVEAU(0): Modeline "1600x900"x0.0 107.80 1600 1626 1686 1892 900 909 919 949 -hsync -vsync (57.0 kHz eP)
[ 181.517] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 181.517] setversion 1.4 failed
(EE) [mi] EQ overflowing. Additional events will be discarded until existing events are processed.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x3d) [0x57f67d]
(EE) 1: /usr/bin/X (mieqEnqueue+0x22b) [0x5615bb]
(EE) 2: /usr/bin/X (QueueKeyboardEvents+0x52) [0x44d452]
(EE) 3: /usr/bin/X (xf86PostKeyboardEvent+0x44) [0x483e84]
(EE) 4: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f4f79e94000+0x5591) [0x7f4f79e99591]
(EE) 5: /usr/bin/X (0x400000+0x73da8) [0x473da8]
(EE) 6: /usr/bin/X (0x400000+0x9c330) [0x49c330]
(EE) 7: /usr/lib/libpthread.so.0 (0x7f4f7f8af000+0xf870) [0x7f4f7f8be870]
(EE) 8: /usr/lib/libc.so.6 (ioctl+0x7) [0x7f4f7e9eef17]
(EE) 9: /usr/lib/libdrm.so.2 (drmCommandWrite+0x5d) [0x7f4f8055e9fd]
(EE) 10: /usr/lib/libdrm_nouveau.so.2 (nouveau_bo_wait+0x8a) [0x7f4f8058446a]
(EE) 11: /usr/lib/xorg/modules/drivers/nouveau_drv.so (0x7f4f7d349000+0x716b) [0x7f4f7d35016b]
(EE) 12: /usr/lib/xorg/modules/libexa.so (0x7f4f7cd05000+0xb308) [0x7f4f7cd10308]
(EE) 13: /usr/bin/X (0x400000+0x170563) [0x570563]
(EE) 14: /usr/bin/X (0x400000+0xc0f95) [0x4c0f95]
(EE) 15: /usr/bin/X (0x400000+0x104193) [0x504193]
(EE) 16: /usr/bin/X (0x400000+0x373be) [0x4373be]
(EE) 17: /usr/bin/X (0x400000+0x2693a) [0x42693a]
(EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f4f7e932bc5]
(EE) 19: /usr/bin/X (0x400000+0x26c81) [0x426c81]
(EE)
(EE) [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
(EE) [mi] mieq is *NOT* the cause. It is a victim.
(EE) [mi] EQ overflow continuing. 100 events have been dropped.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x3d) [0x57f67d]
(EE) 1: /usr/bin/X (QueueKeyboardEvents+0x52) [0x44d452]
(EE) 2: /usr/bin/X (xf86PostKeyboardEvent+0x44) [0x483e84]
(EE) 3: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f4f79e94000+0x5591) [0x7f4f79e99591]
(EE) 4: /usr/bin/X (0x400000+0x73da8) [0x473da8]
(EE) 5: /usr/bin/X (0x400000+0x9c330) [0x49c330]
(EE) 6: /usr/lib/libpthread.so.0 (0x7f4f7f8af000+0xf870) [0x7f4f7f8be870]
(EE) 7: /usr/lib/libc.so.6 (ioctl+0x7) [0x7f4f7e9eef17]
(EE) 8: /usr/lib/libdrm.so.2 (drmCommandWrite+0x5d) [0x7f4f8055e9fd]
(EE) 9: /usr/lib/libdrm_nouveau.so.2 (nouveau_bo_wait+0x8a) [0x7f4f8058446a]
(EE) 10: /usr/lib/xorg/modules/drivers/nouveau_drv.so (0x7f4f7d349000+0x716b) [0x7f4f7d35016b]
(EE) 11: /usr/lib/xorg/modules/libexa.so (0x7f4f7cd05000+0xb308) [0x7f4f7cd10308]
(EE) 12: /usr/bin/X (0x400000+0x170563) [0x570563]
(EE) 13: /usr/bin/X (0x400000+0xc0f95) [0x4c0f95]
(EE) 14: /usr/bin/X (0x400000+0x104193) [0x504193]
(EE) 15: /usr/bin/X (0x400000+0x373be) [0x4373be]
(EE) 16: /usr/bin/X (0x400000+0x2693a) [0x42693a]
(EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f4f7e932bc5]
(EE) 18: /usr/bin/X (0x400000+0x26c81) [0x426c81]
(EE)
[ 216.437] [mi] Increasing EQ size to 512 to prevent dropped events.
[ 216.438] [mi] EQ processing has resumed after 188 dropped events.
[ 216.438] [mi] This may be caused my a misbehaving driver monopolizing the server's resources.
[ 216.438] Failed to switch from vt01 to vt06: Input/output error
[ 216.438] Failed to switch from vt01 to vt06: Input/output error
[ 216.438] Failed to switch from vt01 to vt06: Input/output error
[ 216.438] Failed to switch from vt01 to vt02: Input/output error
[ 216.438] Failed to switch from vt01 to vt03: Input/output error
[ 216.438] Failed to switch from vt01 to vt04: Input/output error
[ 216.438] Failed to switch from vt01 to vt05: Input/output error
[ 216.438] Failed to switch from vt01 to vt06: Input/output error
[ 216.438] Failed to switch from vt01 to vt07: Input/output error
[ 216.438] Failed to switch from vt01 to vt08: Input/output error
[ 216.438] Failed to switch from vt01 to vt09: Input/output error
[ 216.438] Failed to switch from vt01 to vt10: Input/output error
[ 216.438] Failed to switch from vt01 to vt11: Input/output error
[ 216.438] Failed to switch from vt01 to vt02: Input/output error
[ 216.810] (II) evdev: HP WMI hotkeys: Close
[ 216.811] (II) UnloadModule: "evdev"
[ 216.811] (II) UnloadModule: "synaptics"
[ 216.811] (II) evdev: PS/2 Generic Mouse: Close
[ 216.811] (II) UnloadModule: "evdev"
[ 216.811] (II) evdev: AT Translated Set 2 keyboard: Close
[ 216.811] (II) UnloadModule: "evdev"
[ 216.811] (II) evdev: Sleep Button: Close
[ 216.811] (II) UnloadModule: "evdev"
[ 216.811] (II) evdev: Video Bus: Close
[ 216.811] (II) UnloadModule: "evdev"
[ 216.811] (II) evdev: Power Button: Close
[ 216.811] (II) UnloadModule: "evdev"
In addition, I can't seem to find any other files related nvidia that seem like they would matter, except for ~/.nvidia-settings-rc, which I moved to ~/.nvidia-settings-rc.bk (prior to the attempt which created the log above). Keep in mind that this is after re-installing nvidia so I can startx and have a working system... Is there anything that looks like it wouldn't be removed by the nvidia package?
# find / -name *nvidia*
/proc/irq/63/nvidia
/proc/driver/nvidia
/home/jwhendy/.nvidia-settings-rc.bk
[hits from /usr/share/icons excluded]
[hits from /usr/share/ excluded]
/usr/lib/libnvidia-tls.so
/usr/lib/modules/extramodules-3.11-ARCH/nvidia.ko.gz
/usr/lib/modules/3.11.6-1-ARCH/kernel/drivers/net/ethernet/nvidia
/usr/lib/nvidia
/usr/lib/libnvidia-tls.so.325.15
/usr/lib/libnvidia-ml.so
/usr/lib/libnvidia-glcore.so
/usr/lib/vdpau/libvdpau_nvidia.so
/usr/lib/vdpau/libvdpau_nvidia.so.1
/usr/lib/vdpau/libvdpau_nvidia.so.325.15
/usr/lib/libnvidia-glcore.so.325.15
/usr/lib/libnvidia-ml.so.325.15
/usr/lib/libnvidia-cfg.so
/usr/lib/xorg/modules/drivers/nvidia_drv.so
/usr/lib/libnvidia-cfg.so.325.15
/usr/lib/modprobe.d/nvidia.conf # owned by nvidia; removed when I switch to nouveau
/usr/lib/libnvidia-cfg.so.1
/usr/lib/libnvidia-ml.so.1
/usr/bin/nvidia-settings
/usr/bin/nvidia-xconfig
/usr/bin/nvidia-smi
/usr/bin/nvidia-bug-report.sh
/usr/bin/nvidia-debugdump
/root/.nvidia-settings-rc
[hits from /var/abs/ removed]
/dev/nvidia0
/dev/nvidiactl
/sys/bus/pci/drivers/nvidia
/sys/kernel/slab/nvidia_p2p_page_t
/sys/module/drm/holders/nvidia
/sys/module/i2c_core/holders/nvidia
/sys/module/nvidia
/sys/module/nvidia/drivers/pci:nvidia
Anything look odd in the log or the files?
As always, feel free to suggest other things to try -- I can pipe ls into files to show what files are available when I'm pre-startx with nouveau installed, or more Xorg logs... My computer is not happy wtih nvidia at all and is nearly unusable. I really need to solve this until nvidia is compatible with 3.11 kernels again. -
When switching from tab to tab, Firefox 4 has a tendency to blink before displaying the new tab. Just a millisecond or so but can be annoying.
If that doesn't work, try power cycling your router, printer, and your iPad/iPhone in that order. To do this, follow these steps:
Unplug the router and printer from the power and shut off the i-devices. Let them sit for about 30 seconds and then plug just the router in.
Once the router is completely back online (usually takes about 30-60 seconds) plug the printer in. Wait until it is back on its home screen.
Turn the i-devices on.
Try to print again.
Let me know if this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
HT4211 How do you switch from multitasking mode back to normal display mode?
How do you switch from multitasking mode back to normal display mode?
You mean switch from showing the recently used apps bar or dock back to regular home screen display mode?
If so, select the Home button.
Maybe you are looking for
-
How to select multiple values from the Parameters in the concurrent program
How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?
-
EJB 3.0 question - saving an entity bean containing another entity bean
Hi, First, I want to store an entity bean. Secondly, I want to store another entity bean - containing the first entity bean. I have the following code in a session bean for this: public void saveFeedScheduling(FeedScheduling feedScheduling, FeedSourc
-
Tried to delete bookmarks. Doesn't work.
When I try to delete my bookmarks, they don't go away. Now I have an overloaded supply of bookmarks that I don't want. [email protected]
-
A strange question?I think it may go to absurd
It's ok when I test movie in flash It is made up xml menu and external video(flv) and exteral swf. video and swf to play when menu is clicked but when only I run swf is published.video and swf don't appear. are you surprise?
-
Analyze and fix not available in project timeline, fcpx
When I imported media into my event, I did not select Analyze and Fix but now want to use this function. Analyze and Fix is available when I have a clip selected the events library, but Analyze and Fix is grayed out and not available when I select