Home Theater need. Multiple Audio Streams from 1 card or possible to use 2 car

I currently have 2 SB Li've's installed and a SB Audigy in the box.
I would like to be able to send different audio out to different devices. I need to send audio from a game interface called MAME 32 to a speaker system connected to the PC. I also use this PC as a home theater PC and want to send audio from my DVD playing software out to my TV(in analog stereo mode) and/or to my receiver(in Dolby Digital mode using the digital connector).
I would like to be able to run these seperatly without having to go into the Control Panel and switch the default sound card like I am doing now. I do not need to run them at the same time.

Bummer. Are you guys working on something that might have this capability? Seems to me that the closer we integrate PC's into our entertainment systems the more need we will have for the ability to do multiple audio streams, i.e. MP3's to the living room. DVD movie audio to the family room, XM radio classical station to the kitchen for mom etc..
Intel is offering this as an onboard solution that has the ability to do at least 2 different streams.
http://www.intel.com/design/chipsets/hdaudio.htmMessage Edited by relay on 0-26-2004 05:02 PM

Similar Messages

Editing Multiple Audio Clips From Premiere in Audition

Hi there,
I am working with video/audio in Premiere that has frequent cuts (although the audio is derived from two files) and I need to edit all the audio files at once, rather than one by one, in Audition. I was hoping to this by nesting the audio in Premiere but I am not able to edit the nested file in Audition after this.
If anyone has any ideas of how to work with and apply the same properties to multiple audio clips from Premiere in Audition I would greatly appreciate it.
Thanks...

Hi everyone, I also have a trouble with cs6. I just record 3 tracks in the early today, then when I got home, I saved as sexs file ( wrong decision). After that, I went back and try to open the file, it can't file the recording tracks. The only one thing still exist is my beat, what should I do to recovered it? thanks for helping me out of this.

Troubles with Multiple Audio Streams.[ca0106]

Hey everyone.
I have a few issues on my hands that i just cannot seem to get a strait foward answer.
First off, i have a Sound Blaster Live! 24bit pci sound card. Sound plays perfect as well as surround sound.
My issue is that i cannot get mulitiple things to play sound at once. All of the correct modules are loaded just fine and working well. I do believe that when i was using gentoo and could play multiple audio streams, i had alsa built into my kernel.... in arch i dont believe i do.
Im trying not to build my kernel all over again in arch because i think its something in arch i may be doing wrong...
Thanks
Anthony
Last edited by anthonyclark (2008-04-02 13:30:58)

Thanks for the reply.
I know for a fact im using ALSA. Since i made that post, ive been doing as much research as possible. I found on ubuntuforums, some dude posted some configs for his ca0106 sound card. I tried them and they take me to the same fork.
Surround Sound .... or .... Multiple audio streams.
So the big questions is, is it possible to have both? And would compiling a new kernel with ALSA and support for my card make a difference?
Thanks!
anthony
Last edited by anthonyclark (2008-04-02 15:25:48)

FLME to stream multiple audio streams

Is it possible to stream multiple audio streams together with one video stream using FLME.
I need to create a live streaming application that should be available in many languages. My idea is to send 1 video stream + n * audio streams.
Any ideas are appreciated.

FMLE is not able to stream multiple audio tracks.
Perhaps a third party encoder is able to do, but the problem is I think the playback
cause adobe´s pluggin does also not support multiple audio tracks.

Airplay audio streaming from Iphone to ATV crashes when changing randomly title?

Why does airplay audio streaming from Iphone 4S iOS 7.04 crashes when changing randomly title? The ATV is not connected to a TV, only to an AV Receiver. Anywhere the same problem?
Thx a lot
Nolame

Oops - I messed up the title-
This is with iOS 7.0.2 and Apple TV 6.0.

Cannot start mwa audio streaming from web site

Dear all,
I found that i cannot open a wma audio streaming from web sit. Safari popup a error message that the mime audio type is not available. Although I've already installed flip4mac and Media Player 9, both Safari/Firefox cannot playing such audio stream. Is it a plug-ins issue and how can I to check and resolve this? Please help.
Eric

Jeremy Williams wrote:
> I am looking for a free, or not-so-free script or
Dreamweaver extention that
> will enable me to progressively stream mp3 music on my
web pages, but one that
> does not start playing unless you press a play button.
Also, it would be nice
> if it had other control buttons.
>
> If anyone is aware of anything like this, I sure would
appreciate it!
> Thank you in advance!!
>
This one is cool ($34):
http://www.coffeecup.com/web-jukebox/
(Warning, song starts playing when you browse there)
Bonnie
in California
8 ^ )

I can not get an audio stream from any TV channel on ipad

I can not get an audio stream from any TV channel on my ipad ,please help me fix this problem

Muneer-
What App are you using to get the audio stream? Safari should work unless Flash is involved.
I have used the free NPR App to listen to radio stations, but I don't know if it works with TV stations.
Fred

Multiple Audio Streams?

I'm wondering if there is an application that will allow the computer to route multiple audio streams out of my Mac Pro. or- if anyone knows how to create an easily switchable audio routing panel rather than going through preferences.
Eg. I'm playing Itunes (or hulu or netflix) through my audio line out through my Samsung TV thorough a speaker system to watch online content through the TV and I want to work on files on the computer at the same time, say edit video using FCP and routing that audio through USB speakers at the desk.
Being able to create multiple audio stream routing would be a HUGE asset for someone like me. Even if it's not possible, I would certainly love it if Apple would incorporate a quick switch selector in the pulldown menu for audio volume...
Thoughts? Anyone?
Thanks!

Thanks, the "auxillary effect" totally helped me stream itunes music to my iSight with soundflower....giving webcam streaming my system audio, which I couldnt do before without hearing anything....ugh so complicated! but this works!! Sometimes apple is so rediculous and I know there are more features they could build in.
Thanks!

Audio streaming from URL

Hi friends,
Currently imdoing a project in online radio streaming.I have some problems in my coding.Will anyone help me to find out?or will anyone send me the codings,if u have?Below this program its showing error message as " COULD NOT CREATE AUDIO STREAM FROM INPUT STREAM".and how to use this continuous stream option.
public static void main(String args[])throws IOException
      try{
         URL url=new URL("some url ");
         HttpURLConnection h=(HttpURLConnection)url.openConnection();
         h.connect();
          AudioStream as = new AudioStream(url.openStream());
          AudioData data =as.getData( );
          ContinuousAudioDataStream cas = new ContinuousAudioDataStream (data);
      AudioPlayer.player.start(as);
      //AudioPlayer.player.stop(as);
      catch(Exception e)
      System.out.println("Unable to Connect :"+e);
     }If anyone knows plz send me the codings to my id: [email protected].Waiting for codings and suggestions.

just visit
http://javasolution.blogspot.com/2007/04/simple-application-for-voice.html

Encoding multiple audio streams?

Can iDVD see and encode multiple audio streams for a single movie? Maybe this is asking too much but perhaps I've overlooked something...

The norm is to export video and audio out of Premiere Pro separately. Doing this, you will end up with one video file and multiple audio files. Bring them into Encore and add them to a timeline.

I have a license for CS6 on my MacBook Pro. I want to purchase an iMAC and be able to do my heavy duty Photoshop processing on this new iMAC when I am at home I need to keep CS6 on my MacBook Pro and use it when I travel. How can I have copies of CS6 o

I have a license for CS6 on my MacBook Pro. I want to purchase an iMAC and be able to do my heavy duty Photoshop processing on this new iMAC when I am at home I need to keep CS6 on my MacBook Pro and use it when I travel. How can I have copies of CS6 on both machines. I am the only user of this software.

You can install and activate CS6 on both machines perfectly legally.

Can Multiple AppleTVs Stream from the Same iTunes?

I'm about to receive two AppleTV units for my home. One for each of the main TVs. Can I stream content from one computer to both units at the same time? (I'm not looking to have different content played at the same time, just the same thing going to both units) If anyone has some insight on this, I'd appreciate it!

Chris is correct, if you stream the same content to two tv's it will be via two streams. You will need to initiate each stream from each tv so synchronisation will be difficult for you.
I often have 2 or 3 streams from my library at the same time, I don't have any issues with it. (My mac is on a Gb network with my tv's on either the same Gb network or their own wifi networks)

Workflow Suggestions for Getting Multiple Audio Tracks From Drum Machine

My goal is to make separate audio tracks from the MIDI output coming out of a hardware Boss DR-880 drum machine. It has nice drum samples that I would like to use. So far, I know how to split the output by MIDI notes as to create multiple tracks. I end up with a about 10 tracks which are all MIDI of course. What I want to do is end up with all audio tracks. This way I can set the levels and EQ to taste for each part of the drum kit.
What's the most straightforward way to achieve this goal? I tried bouncing in place but that only works for plugins -it's grayed-out for the post note split generated MID tracks. I also found a post on this forum with what I think is similar question but it's closed and the question was not clearly answered for a newbie like me.
So far I can do this:
1. Record the MIDI output from the drum machine to an External MIDI track.
2. I then split the MIDI track by note to get multiple MIDI tracks.
3. To get audio I play each track individually e.g., just the kick drum and record the audio coming
out of the drum machine into an audio track.
This is a huge pain since I have on average about 10 MIDI tracks! There has to be a better way, right?
Thanks!

hi there:
ok now when u want to do such a thing which i totally understand what u are trying to do !so u have these options L
1- u should have a mixer to feed it with all your outputs from outboard gears like drum machines ,samplers etc...coz what u like in your dr-880 is the character of its sound and trust me if i tell you even if u tried to sample it and put it into any sampler software ,it will have the same sound but not the same character ! so thats why we still have samplers and out board gears and they will be still manufactured coz of that reason ...so for example i use my akai s6000 sampler which it has 16 outputs direct to my mixer so i can do what ever i want midi wise and audio wise with out any pain ,coz even if i have the same samples into my whatever sampler software i will never have the color and the character of the sound coming out from my akai ...and i use a drum machine which it has 10 outs as well and all is playing in sync in real trime with my audio tracks inside my logic ...this is the best solution !but i think u dont have that solution but u have to think about it if u bring a good console..!
2- you don't have to divide your midi from your machine you just do what ever its need to be done and when u finish record them one by one into your logic or 2 by 2 or what ever but in this case u cant control the midi of it anymore
but you gonna pain to do that every time coz sometime u dont have much time to think about u have to record the sound before any mix down!but it will work for you
3- make samples by your own of your drum machine and use esx24 to play them !but again you gonna lose the character of your sound but still having the same sounds u want ( if u know how do make a good samples).
i hope this tips gonna be useful for you .
cheers..!:)

Starting steps required: audio streaming from UDP port

Hi,
I need help regarding audio streaming support of JMF. I want to know basic starting steps to stream audio file from UDP port. i am new to JMF so require detailed help..
Thanks

[http://wiki.java.net/bin/view/Javapedia/JMFQuickstartGuide]
I'd recommend reading that. All of it. And then I'd recommend doing everything it tells you to do in the "Getting Started" article.

What kind of audio interface do I need for audio out from MainStage 3?

I have a Yamaha MO8 that I use for playing in the worship band at my church. In the past, I've just directly routed audio from the MO8 through a direct box and into the sound system.
I'm looking to switch my setup and use the Yamaha MO8 as a midi controller in MainStage 3. I have this part working — the problem is getting the audio from my MacBook Pro.
The audio output sounds fine through the MacBook Pro speakers or through headphones plugged into the audio out / headphone jack; however, if I plug the direct box into the MacBook Pro's audio out / headphone jack, the signal the sound system gets is very pretty weak and very distorted.
I'm assuming I need an audio interface between my MacBook Pro and the direct box / sound system. Since it's a 2010 MacBook Pro, I'm assuming my only output option is USB (unless the digital audio out can be used). If that's correct, would something like the Scarlet 2i2 work for me?
Thanks…

Yes, you'll need some sort of audio interface to get a good signal back to your mixer.
The Scarlet 2i2 would work for you but you may find a few limitations. I use a MOTU Audio Express and it has the advantage of being a mixer as well, so I can mix in a backup signal from the onboard audio outs of my controller (Kurzweil PC3x) in case MainStage goes down (it happens on rare occasion). Firewire is my preference so the MOTU checks that box. I also like that I can connect my MIDI cables to the MOTU and have one cable going into the computer.
If you need this sort of compact redundancy, I would shoot a little higher than the Scarlet. If you don't feel the need for a backup line and USB works for you, then the Scarlet unit would be an excellent value.

Home Theater need. Multiple Audio Streams from 1 card or possible to use 2 car

Similar Messages

Maybe you are looking for