Home wifi connection only worked first time?

Hello.
Second day with my new 3GS and it says 'unable to join the network BP'. When I first switched it on last night it found the network, I entered the password and it was connected. Even made a phone call via Skpye - very cool! Love this phone, hoping a simple glitch to fix this problem? Reading old posts I have tried restoring network settings, turning off, reentering WPA and SSID. Have checked Apple support page. Not sure about router settings - should I be calling Bigpond?
Thanks.

You should not have enter the SSID unless your router withholds it to hide your network. I would try re-starting the router and the network should appear in the Wi-Fi network list and your iPhone should join your network automatically without re-entering the password and assuming it is in range of the router.

Similar Messages

UploadedFile & https Only work first time upload ????

I am using 10.1.3.4 Jdev. I use UploadedFile interface to upload files from local PC and ftp files to unix server. My "upload" web page works between my local PC and Unix server, but it only works first time upload file and ftp between
https server (application server--weblogic 10.0) and Unix server. If I just use http without SSL and my codes work fine you can upload file as many times you want and ftp them to Unix server. I used FTP not sftp to transfer files from application server to unix server. Can anyone shed some lights on my head ???? Thx.

Yes. I changed my code to SFT from ftp. it works. Thx. This URL for sftp: http://www.jcraft.com/jsch/ and is very good .
Edited by: albertpi on Feb 11, 2010 8:05 AM
Edited by: albertpi on Feb 11, 2010 8:05 AM

I have just purchased an ipad 2 (already have an inpad1) and after syncing through itunes it will not conncect to my home wifi connection. The first ipad connected immediately when bought. this one indicates my wifi address but states not connected.

I have just purchased an ipad 2 (already have an ipad1) and after syncing through itunes it will not connect to my home wifi. The first one connected immediately after setup. This one indicates my wifi accpimt bit states not connected. Help!

What make, model and version router do you have?
Is MAC address filtering turned ON in your router?
Do you have a limit on the number of connections set in your router?
What type of security are you using, i,e, WEP, WPA, WPA2?
Have you tried restarting your router? (remove power for 30 seconds and restart)
Does your iPad 2 work on any other networks? Starbucks, Borders, etc

Why is my home wifi connection wont work with my Iphone?

After I upgrade my Iphone OS 5.0, my Iphone does not connect with my home wifi but works with other wifi. I tried many ways to reset my Iphone and it remain the same. Hope someone can help me out here. Thanks! WEC

did you try to reset the router?
are other devices connecting to the wifi?

Why does my wifi connection stop working at times? both ipad and iphone

Ever since the iOs 7 update my wifi, on both the ipads and iphones, doesn't always connect. Some times is does and sometimes it won't connected even though there is a wifi setting available. How do I fix this. I don't have cellular service on my ipads. wifi is the only means for them. If someone can help me fix this problem it would greatly participated. Thanks

http://support.apple.com/kb/TS1398 This should help you

Af:commandMenuItem action only works first time

I am using the af:panelPage, and have added a menu1 facet that contains an af:menuTabs component with 3 af:commandMenuItems. I'd like the selection of each tab to invoke a bean 'action', where I'll set some flags that control the rendering of different subviews.
I really like JDeveloper and ADF Faces... but I must be misunderstanding something basic. It all seems easy, and when I run and select one of the tabs, the correct 'action' is called and all works great. But when I then select a different tab, the 'action' is not called. Nothing happens after this.
I'm still learning both web-aps and JSF stuff, so hopefully I'm just doing something dumb.
The .jspx stuff looks like:
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:c="http://java.sun.com/jsp/jstl/core"
xmlns:af="http://xmlns.oracle.com/adf/faces/EA16"
xmlns:afh="http://xmlns.oracle.com/adf/faces/EA16/html">
<jsp:output omit-xml-declaration="true" doctype-root-element="HTML"
doctype-system="http://www.w3.org/TR/html4/loose.dtd"
doctype-public="-//W3C//DTD HTML 4.01 Transitional//EN"/>
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
<afh:html>
<afh:head title="try1">
<meta http-equiv="Content-Type"Â content="text/html; charset=windows-1252"/>
</afh:head>
<afh:body>
<af:form>
  <af:panelPage binding="#{backing_rmMain.panelPage1}">
    <f:facet name="menu1">
Â Â Â Â Â Â <af:menuTabs binding="#{backing_rmMain.mainTabsBar}">
        <af:commandMenuItem text="Overview"
          binding="#{backing_rmMain.overviewTab}"
          action="#{backing_rmMain.overviewTabAction}"/>
        <af:commandMenuItem text="Configuration Setup"
          binding="#{backing_rmMain.configTab}"
          action="#{backing_rmMain.configTabAction}"/>
        <af:commandMenuItem text="Results View"
          binding="#{backing_rmMain.resultsTab}"
          action="#{backing_rmMain.resultsTabAction}"/>
      </af:menuTabs>
    </f:facet>
    <f:subview id="overviewPage" rendered="#{backing_rmMain.showOverview}">
      <jsp:include page="/WEB-INF/pages/Overview.jspx"/>
    </f:subview>
    <f:subview id="configPage" rendered="#{backing_rmMain.showConfig}">
      <jsp:include page="/WEB-INF/pages/Config.jspx"/>
    </f:subview>
    etc...
  </af:panelPage>
</af:form>
</afh:body>
</afh:html>
</f:view>
</jsp:root>
The backing bean action handlers simply set some booleans and return (I've tried returning both null and a simple string value... I'm not using navigation rules for this). If I set breakpoints, the action handlers get called, but only for the first selection.
Thanks for any suggestions or help.
Don

After a couple of days of "try this, try that" I've concluded that the problem was caused by the <jsp:include>. As I'm learning, one must be careful when mixing JSF and ADF components, as well as how components are nested within containers.
I was hoping there would be a way to visually develop a page fragment in one file, and then include it in another file. But I could not find a way to do this.
What I'm doing for now is:
1. Create a jspx file for my sub-page (so I can develop it graphically).
2. Create a jspf fragement file, and include that in my main page using <jsp.directive.include>.
3. copy/paste from the jspx file to the jspf file to test (but only copy the portion between the <af:form> block.
Seems to work. I'm open to better suggestions.
Don

Simulating animation by iterating - JLabel icon. ONLY Working first time!

I am "simualting" animation by changing the icon attribute of a JLabel. If I call the method from main, this works. It also seems to work (ie. the JLabel image changes on the screen as the icon attribute is changed in the program.) if I call it first from another or its own class one time, but not after that. What happens on subsequent calls is: The thread.sleep() is working (time passes), and the icon attribute of the JLabel is chaging (lblCaveActive.getIcon() for the JLabel returns the correct changed *.gif, but the images do not show up on the screen, until the last image, whatever I set it to be. I am pulling my air out over this little problem, which is the last lingering problem I am having with this project....I was wondering if you have seen this or have any ideas? I have tried lots of different things, including repainting and such. If you have a clue concerning this, please please please advise, o wise one.
* simulates animation: ex. Wumpus approaching to eat the
* player, bat appraoching to transport player
* @param: int numPics - number of pictures to loop through
* @param: String picNamePreface - filenames must be "*0.gif" through
* picNamePreface + numPics + ".gif".
* Send the "*" portion into this arg
* @param: int milliSecSleep - seconds for the thread to sleep between
* pictures
private void animateMeetHazard(int numPics, String picNamePreface,
int milliSecSleep)
try
for (int i = 0; i <= numPics; i++)
caveCurrentIcon = new ImageIcon(picNamePreface + i + ".gif");
lblCaveActive.setIcon(caveCurrentIcon);
Thread.sleep(milliSecSleep);
catch (InterruptedException e){}
--A very tired girl.

Something like
private void animateMeetHazard(int numPics, String picNamePreface,
int milliSecSleep)
try
SwingWorker workHard = new SwingWorker()
public Object construct()
for (int i = 0; i <= numPics; i++)
caveCurrentIcon = new ImageIcon(picNamePreface + i + ".gif");
lblCaveActive.setIcon(caveCurrentIcon);
Thread.sleep(milliSecSleep);
return null;
public void finished()
workHard.start();
catch (InterruptedException e){}
Not really sure if the Thread.sleep() will throw you out and give you the same problems .. but it mightn't ;)

Copy workflow issue - Only works first time

Hello
I created a simple "copy" workflow with SPD: it should automatically copy to another library any new files that match a condition , as they are uploaded.
If Current Item:Doc Type equals JobReport
Copy item in Current Item to Job Reports
Stop the workflow and log File copied
It works with the first file, then it quit working, even if disaply "Completed" in the workflow outcome field.
Source Library is DocSet enabled, while destination library is not.
Any idea? Thnks
Lucio

After a couple of days of "try this, try that" I've concluded that the problem was caused by the <jsp:include>. As I'm learning, one must be careful when mixing JSF and ADF components, as well as how components are nested within containers.
I was hoping there would be a way to visually develop a page fragment in one file, and then include it in another file. But I could not find a way to do this.
What I'm doing for now is:
1. Create a jspx file for my sub-page (so I can develop it graphically).
2. Create a jspf fragement file, and include that in my main page using <jsp.directive.include>.
3. copy/paste from the jspx file to the jspf file to test (but only copy the portion between the <af:form> block.
Seems to work. I'm open to better suggestions.
Don

Why my wifi connection is unstable? I have an ipad 4 wi-fi and my net connection only works very close to my router!

My wifi connection only works well if i am really close to my router. My notebook connection runs great either close or far from the router! What can i do about that? Thank you!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

IPAD - My Wifi connection was working yesterday at home - today not anymore

Can anyone please help me with my IPAD. My Wifi connection was working well until yesterday evening. I started to download 2 movies from itunes, went to bed. This morning, only about 20% of first movie was downloaded and I can't join anymore my Wifi net at home. I have reset connections, gave again password and appears "unable to join network". Other computers at home work well. IPAD can connect to wifi in another house/network, and 3 G works fine... Thanks for any idea on how to repair.

yes, it does. with my macpro and a couple of pc's

I bought a camera connection kit. First time it worked fine, using the USB connector, but now neither the USB or SD connector works. The iPad shows a connector is attached, but Photos doesn't open. Any ideas? thanks

I bought a camera connection kit. First time it worked fine, using the USB connector, but now neither the USB nor SD connector works. The iPad shows a connector is attached, but Photos doesn't open. Any ideas? thanks

If you have not done so, try exiting the Photo app (and maybe more apps if you have a lot open) from the Open Apps List and see if a discount/reconnect opens the app. If that does not work, try powering down the iPad and test. If it is still not working try a hard reset by pressing both Home and Sleep/Wake buttons at the same time until the Apple graphic appears, ignoring the Slide to Power Off button.

My ipad mini refuses to join home wifi connection. It is trying to do so continuously but with no success. I tried to reset all settings. Switched wifi off and then back on. Nothing works. The rest of devices are fine with the wifi. What shall I do next?

My ipad mini refuses to join home wifi connection. It is trying to do so continuously but with no success. I tried to reset all settings. Switched wifi off and then back on. Nothing works. The rest of devices are fine with the wifi. What shall I do next?

Maybe reboot your router. Unplug it for about 30 seconds or so and then plug it back in. Reboot your iPad while the router is powering up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

MY BBM , BLACKBERRY WORLD, FACEBOOK APPS AND OTHER IM APPS STOPPED WORKING ON MY HOME WiFi CONNECTION

Please I am wondering if anyone will have solution to my BBM problem , I am presently using my blackberry on home wiFi connection as I have ended my contract with my network provider(virgin). The BBM, IM applications ( yahoomessenger, window live, AIM, talk) ,my facebook apps and blackberry world were all working fine even with different wifi connection. But recently I am unable to use all these above mentioned applications more importantly my BBM as I needed it badly to communicate. Initially , I thought it was the internet connection at home but I found out the browser and two other applications I have are working perfectly. I don't know if anyone will have an idea of any solution to this problem.
I would appreciate any effort towards solving this problem.
Thanks

BBM requires an active BlackBerry data plan. As for others, try downloading the latest version of App World from www.blackberry.com/appworld and then update your Facebook and Twitter apps, most should work via WiFi only.

TS3274 its almost 10 months,i purchased ipad2 32 3g wifi.itinially i got problem with applications shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs freq

its almost 10 months,i purchased ipad2 32 3G wifi.itinially i got problem with applications and safari shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs frequently.plz advise.

If you have followed the standard Apple troubleshooting processes (see user guide )
probably a trip to the local Apple Store Genius bar is called for before warranty runs out
Assuming the iPad has been released in your Country if not you may have to take it to a
neighbouring Country where it is available
This page will tell you ,via the drop down menu Countries that can support iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=ipa d

HT1476 if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in A

if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in America?
please i need help, im worried that if I connect my ipod here, it will burn or sometihng bad.

Just connect it to a computer's USB port.
Most wall chargers are dual voltage (110- 220 volts) and only require a plug adopter. Check the wall charger to see if yours is.

Home wifi connection only worked first time?

Similar Messages

Maybe you are looking for