Homefusion - Salespeople not trained on data use

I'm on a share everything plan with multiple family members.
We have 3 smart phones, 1 tablet, and 2 dumb phones. and were able to share 8GB data with no issues (it may have been even lower than that)
Recently the owner of the plan was talked into switching from her existing ISP to Verizon's Home Fusion Service, and adding this service to our data pool.  (Had I known this was happening, I would have talked her out of it immediately.. or at least explained what this meant)
She is NOT tech savy (and I'm sure many Verizon customers are in this boat), so she asked your salespeople MANY questions about the service, and was excited about getting better/cheaper/more reliable internet, and finally getting rid of her land line.
Instead, your salespeople provided FALSE information, and failed to inform her of approximately how much data this many devices would use (They left the data at less than 10GB for this many devices, and told her that this would be PLENTY).   She told the salespeople that she streams netflix. They told her that it would be FINE as long as she only watched them from her laptop.  What they failed to tell her is, "10 GB of data isn't really enough to allow you to stream more than 10-15 shows/movies on netflix each MONTH.  You could quickly run out of data, so perhaps we should start out with a larger data plan, and then reduce it if we see that you aren't using as much as you had thought).   Nor did they tell her that 10GB of data at home isn't really that much (she's not tech savy)
I wasn't aware of the changes to our plan or the impact it would have, until we were in Door County, WI.   This area has extremely limited cell phone coverage and zero chain stores (no Verizon stores).  We were on day 2 of our vacation when the first data alert was texted.  We had used 50% of our data, and we still had another 15 days to go.  (In the past, we only received the 50% usage texts when there was 1-2 days left of our billing cycle).
All of the smart phone users on the plan turned off our cellular data and used the hotel's wifi instead. NOBODY WAS AT HOME TO USE THE INTERNET.   Day 2: I received the text stating we had used 75% of our data.  An hour later it was 90%     I tried calling, but didn't have the account password on me.  The customer service rep told us we could fix it online.   We raced back to the hotel and I used a computer to log onto verizon's website and adjust the data plan before we went over.
I updated our data, and received a confirmation email that we were in the clear.  I looked at our data usage online after adding the extra data and we were fine, so I didn't worry about it again. I figured we had fixed the problem before overages had occurred, and we stopped receiving overage messages.
This was last month.
TODAY I find out that we DID indeed end up with overage charges.   Apparently we were supposed to somehow BACKDATE this data upgrade, or it didn't count (?!).  So although everything I saw on the internet looked good, and when the plan owner called a verizon customer service rep who told her, "those overage messages must have been a mistake, you were nowhere near going over"..  when it came time to bill us, we suddenly have an OVERAGE that was not there before.   In fact, it wasn't there when I LOOKED a couple of weeks ago when we started getting '50% usage' errors (and logged in to find out that we were fine, and had this fact confirmed by a customer service rep who said that these usage texts were going out in error.. and others had reported them too)
So now we have to pay overage fees, because of misinformation from your sales staff and customer service reps.
Do NOT add Home Fusion to your shared data plan.
Get a CLEAR idea of your existing home internet usage before committing to this service, and get more data than you need until you know what you actually use. 
Do NOT listen to their salespeople who try to convince you to get LESS data (hey look at those amazingly high overage fees), and monitor your service closely.  
It's actually cheaper to CANCEL this service and pay the early termination fee.  
And what exactly does this mean?
"New customers to the service will receive 50% more data allowance for their first 2 full billing cycles. Requires new 2-year activation. Overage is billed at $10 for each additional 1GB. 50% more data not available on Share Everything plan."
<<Text from duplicate thread added>>
Message was edited by: Verizon Moderator
Duplicate thread started - text added to original post

Dealing with overages is not how we want any of our customers to enjoy service with us thkidsall. We certainly do not want to lose you. We want all our customers to know they can check data usage at any time by dialing #data on their phones or via My-Verizon online. Yes, streaming, downloading, uploading, games, and apps can all use data. If the person is constantly streaming, data can be used very quickly. This information is also on our website. I would love to know what misinformation you were given, so we can correct this information. The owner of the account signed and agreed to the new plan. They can definitely wait in the future to have another person from the account to join them when choosing a plan and device so they can pick the correct options for your needs. Plus, the data package we recommend is just an estimate of data and we suggest the plan that may be best but also give you the opportunity to change plans at any time to prevent overages. We also provide great advice to help manage data, for instance using wifi, not streaming all day, and closing apps or programs that may use data. Additionally, your phones all have the opportunity to use wifi when available to prevent data usage. In regards to the changes online, we ensure that customers have a clear understanding of future dating, backdate, and on demand. I'm sorry you made the choice to change your data plan on demand and it incurred overages. Were you provided any help with the plan changes and bill? Please let us know if you have any furhter questions.
Kinquana_VZW
Please follow us on twitter @VZWSupport

Similar Messages

  • Time frames are not accurate with data used?

    Why does the time frame of Data used  not correctly  reflect the same on my bill?

        Hi Critch! Thats a great question. The difference in times may be reflective of difference in time zone or usage not reported while on an extended network. Are the times off by a few minutes or several hours? Does this happen with voice and messaging usage as well?
    Thanks,
    AdamE_VZW
    Follow us on Twitter @VZWSupport

  • Comcast home pge thru firefox does not have correct date, using ie i have the correct date

    when i open comcast using firefox, date on homepage is november 5, when i use internet explorer date is correct

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Trains Stops and Insert new data using invokeAction!?

    Hi! I am using Train element to insert data in some tables. When I open first Train Step I use invokeAction to call CreateInsert operation and could insert new data in table1. Then I go to Train Step 2 and using invokeAction insert data in table2 and so on.
    I have two questions:
    1. When I go back to previous Train Step using "Back" button then invokeAction again calls CreateInsert operation, but I don't need it. It is possible to call CreateInsert operation using invokeAction ONLY if user goes forward by pressing "Next" button in Train element? If it is possible then What I need to change in my code?
    invokeAction source:
    <invokeAction Binds="CreateInsert" id="insert_mode"
                      RefreshCondition="${!requestContext.postback and empty bindings.exceptionsList}"
                      Refresh="prepareModel"/>2. It is possible to DISABLE some Train Stopas. For example, I want to disable first Train Stop for user when he go to next steps, so that user can't anymore go back to first Train Stop.
    Hope for Your answers, best regards, Debuger!

    Hi, Umesh! My use case is following: I am on first Train Stop and enter some data. Then I go to second Stop and enter some data and so on. When I go to first, second etc. Train stops I use invokeAcrion to call CreateInsert. I need to call only this operation when I press next button. When I press Back button I do not need to call Create Insert action. Hope You understand me.
    So, as I understand, i need to create method which indicates variable value based which button is pressed. But I don't understand how I can say, variable x=nextbuttonpressed or x=backbuttonpressed based on which button I realy press. And do not understand also how to use this variable in invokeAction Refresh Condition?
    Hope You can explain me that with steps to do in my case and can help with code?
    Waiting for response, best regards, Debuger.

  • Iam not getting the data on screen after using the user exit zxpadu01

    Dear Freinds
                As per my requirement when the user enters value Ansal  it should get defaulted to Amount field (bet01 ) based on the wage type
    i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default  on the screen for bet01 once i enter value for Ansal , please any body correct my code
    in   ZXPADU02 i have written the code as  below :
    data : wa_p0008 like p0008,
            i0008 like p0008,
           l_v_ANSAL type ANSAL_15,
           l_v_amount type PAD_AMT7S.
    CASE innnn-infty.
    when '0008'.
    CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
    EXPORTING
    prelp = innnn
    IMPORTING
    pnnnn = wa_p0008.   -- HERE I GOT ALL THE DATA EXCEPT BET01
    if wa_p0008-lga01 = 'MFPY'.
    l_v_ansal =  wa_p0008-ansal.
    l_v_amount = l_v_ansal / 100.
    move l_v_amount to wa_p0008-bet01.
    CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
    EXPORTING
    pnnnn = wa_p0008  --- HERE I CAN SEE EVEN THE BET01 IS FILLED
    IMPORTING
    prelp = innnn.         --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
    endif.
    when others.
    endcase.
    IN ZXPADU01 I HAVE WRITTEN AS BELOW:
    data : wa_p0008 like p0008,
            i0008 like p0008,
           l_v_ANSAL type ANSAL_15,
           l_v_amount type PAD_AMT7S.
    CASE innnn-infty.
    when '0008'.
    MOVE-CORRESPONDING  innnn to wa_p0008.
    CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
    EXPORTING
    prelp = innnn
    IMPORTING
    pnnnn = wa_p0008.
    if wa_p0008-lga01 = 'MFPY'.
    l_v_ansal =  wa_p0008-ansal.
    l_v_amount = l_v_ansal / 100.
    move l_v_amount to wa_p0008-bet01.
    CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
    EXPORTING
    pnnnn = wa_p0008   --- I CAN SEE ONLY WHEN I COME AGAIN
    IMPORTING
    prelp = innnn.
    endif.
    when others.
    endcase.
    Now my problem is as follows :
                   i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
    and it should  display in bet01 as 10 ( q0008-bet01 =  p0008-ansal /100)
    but i dont find the value 10 being displayed for the field bet01 on the screen  when
    user enters Ansal  as 1000 .........even then i have saved it to test the scenario......
    now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same  dates .....where i created the record........i found that the value
    bet01 is there i.e i can see  the value bet01 as 10 ( my requiremnt here matching)
    but when the user say enter during the time of creation of the record the value
    bet01 is not getting defaulted with 10 .........why iam not able to understand
    PLEASE ANY BODY HELP ME IN THIS REGARD 
    regards
    shanti.

    Hi Pranesh,
                   i have used the logic which you hav given as below
    in ZXPADU02
      FIELD-SYMBOLS <fs>  TYPE ANY.
    ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
    if <fs> is assigned.
    <fs> = l_v_amount .  ---  amount as (ansal /100 i.e 1000/100 = 10) 10
    endif.
    still iam not getting the data for the field bet01
    this is the coding i am using
    data : wa_p0008 like p0008,
            i0008 like p0008,
           l_v_ANSAL type ANSAL_15,
           l_v_amount type PAD_AMT7S.
      FIELD-SYMBOLS <fs>  TYPE ANY.
    CASE innnn-infty.
    when '0008'.
    MOVE-CORRESPONDING  innnn to wa_p0008.
    CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
    EXPORTING
    prelp = innnn
    IMPORTING
    pnnnn = wa_p0008.
    if wa_p0008-lga01 = 'MFPY'.
    l_v_ansal =  wa_p0008-ansal.
    l_v_amount = l_v_ansal / 100.
    move l_v_amount to wa_p0008-bet01.
    ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
    if <fs> is assigned.
    <fs> = l_v_amount .
    endif.
    CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
    EXPORTING
    pnnnn = wa_p0008
    IMPORTING
    prelp = innnn.
    endif.
    when others.
    endcase.
    please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
    regards
    shanti.

  • Data Federator not fetching data USING Netweaver BI Connector

    Hi Gurus,
    We have upgraded the BW system to use the Data federator.
    callback ID that SAP NetWeaver BI uses to contact Data Federator has been configured as mentioned in guide.
    we have already configured the CONNECTOR and we are able to test the connection in DF Designer and the connection is successful. i am able to see the list of fact tables and i am saving the data source and making it final and deployying my project .
    i am using the jdbc connection and  data federator strategy and  the strategy is also creating the joins and classed automatically. when i export my universe and try to create the webintelligence report i am unable to see the data .even when i execute with one  object  and one keyfigure it is same .
    even when i test my data source in designer to view the data using query tester tool it is also not able show the data it takes huge time and no data getting retrieved .
    i would appreciate if you could help me with this issue
    Regards and thanks
    Abid

    Hi,
    Which version of Data Federator are you using ? Direct access to ECC table is not yet supported using Data Federator.
    Jean-Pierre

  • How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

    I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
    have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

    Jay del Rosario wrote:
    >
    > How do I troubleshoot installation/distribution of a LabVIEW .exe
    > which processes data using Matlab when it works on some computers but
    > not others?
    Poke around zone.ni.com and
    http://digital.natinst.com/public.nsf/$$Search/ .
    Good luck, Mark

  • I have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

    i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

    Itunes 11.1 is for your computer, not your iphone
    It is required in order to sync with ios 7.

  • ReportViewer control used with a remote report does not display any data.

    Hi there,
    I have this .rdl report that runs just fine on our reporting server (I can see that when I try to run the report by accessing its URL in a browser). However, when I run it in my Windows-based application, I do not see any data. My report has two input parameters
    and it needs to impersonate the caller's identity because the database uses Windows Authentication.
    Here is the code I use:
    var reportViewer = new ReportViewer();
    // Set Processing Mode
    reportViewer.ProcessingMode = ProcessingMode.Remote;
    // Set report server and report path
    reportViewer.ServerReport.ReportServerUrl = new Uri("http://MySsrsServer/reportserver");
    reportViewer.ServerReport.ReportPath = "/Reports/MyReport";
    // set the credentials
    reportViewer.ServerReport.ReportServerCredentials.ImpersonationUser = WindowsIdentity.GetCurrent();
    // create report parameters and set them in the report
    var param1 = new ReportParameter("First_Param", "Some string");
    var param2 = new ReportParameter("Second_Param", "Some other string");
    reportViewer.ServerReport.SetParameters(new ReportParameter[] { param1, param2 });
    using (var reportForm = new ReportForm(reportViewer))
    reportForm.ShowDialog();
    The ReportForm is just a regular Form that has a member of type ReportViewer. In the class' constructor, I assign the member:
    public ReportForm(ReportViewer reportViewer)
    InitializeComponent();
    try
    this.reportViewer = reportViewer;
    reportViewer.SetDisplayMode(DisplayMode.PrintLayout);
    reportViewer.Dock = DockStyle.Fill;
    reportViewer.ZoomMode = ZoomMode.Percent;
    reportViewer.ZoomPercent = 100;
    reportViewer.RefreshReport();
    catch (Exception exception)
    MessageBox.Show(exception.Message);
    Using database level tracing, we were able to confirm that the two Stored Procedures used by the report are called and they return correct and valid records. However, in the form nothing shows up:
    Any suggestions?
    TIA,
    Ed

    Good to know CR doesn't like joins of Stored Procedures to something else.
    But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
    In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
    And by just adding some spaces in between, my report works fine again ?!
    Strange, strange, strange,....

  • I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes.

    I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes. I'm not sure of what to do. It's quite frustrating, and all I need is advice, and help. I would much appreciate it. Thank-you.

    In order to download to your phone over the air, you need to be connected to WiFi.
    It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
    You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi.

  • Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad?  I would love to use my new ipad away from home but not sure how to use it?

    Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad?  I would love to use my new ipad away from home but not sure how to use it?  I am on Telus mobility with my iphone 4s.

    See the answer on the same question you asked a few minutes ago.

  • Import option is not showing the Data Source created using ODBC

    Hi all,
    I'm new to OBIEE, just installed OBIEE 10g in my system with the help of some reply from this Forum (thanks to Kalyan for this).
    Now when I tried to create new rpd, the Import option is not showing the Data source I have created. I have created new Datasource in the SystemDSN tab of the ODBC Administrator window,I have tried this by creating the Datasource in the UserDNS tab as well.
    Mine is Windows 7 Ultimate. The new data source which I have created through the ODBC Administrator window is to connect to SQL 2008 (I'm trying to get some table from SQL 2008 database), I don't have Oracle data base.
    While creating the Data source ODBC Administrator is showing only two drives (SQL Server and SQL Server Native Client 10.0 ) , so I have created the Data source using the SQL Server Native Client 10.0 drive.
    Can some one help me to understand the issue and to solve it.
    Thanks,
    Mithun

    By calling your cellular data provider.

  • I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    Select all the photos that you need to change, then click the "Photos" menu and choose "Adjust Date and Time".
    If you add a year, it will adjust all the photos that you selected by adding a year (so if you accidentally select one of the photos that already has "2012", that will change to "2013"). 

  • How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

    Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

    All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
    Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
    Message was edited by: modular747

  • TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data.  I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

    I found this  (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data.  I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder. 

    It sounds like there are a couple things going on here.  First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
    Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance.  Once you find this, make sure the service is started. 
    If not started, try to start it and see if it throws an error.  If you get an error, post the error message your hitting.  If the service starts, you can then launch SSMS and try to connect.  If you have a default instance, you can use the machine
    name in the connection dialog.  Ex:  "COWBOYS" where Cowboys is the machine name.  However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format.  Ex:  COWBOYS\Romo (where Romo
    is the instance name you set during install).
    You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install.  Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
    recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
    Thanks,
    Sam Lester (MSFT)
    http://blogs.msdn.com/b/samlester
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
    "Mark as Answer" and
    "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Maybe you are looking for

  • Not recognizing my external HD??

    I open TM and it won't recognize my new external HD. What is the deal?? How do I fix this??

  • Tcp/7002 needed from OVM Server to OVM Manager?

    Hi, When i take a look at the diagram on 3.3.2.6. Firewall Configuration i see that the Oracle VM Server only need tcp/7001 and udp/123. When i check the logging of an OVM Server i see the following logs: [2013-10-23 12:24:20 7761] DEBUG (base:109) u

  • Restoring saved queue after computer crashes

    Is there a way to do this? Would the media cache help as well? I'm on mac osx 10.8.3 5g of ram adobe media encoder cs6. My computer happened to crash as I was enconding a video a couple times now- probably just due too much running in the background

  • How to remove event listener when all the MoviClip are off the stage

    Hi i am newbie to as3,     I am creating animation using as3 in which i duplicate the circle ten time,then pushing into an array and giving random motion. When all the duplicate object goes outside the stage then i should remove the event listener. B

  • PLEASE Help with Newsletter Page Setup

    Hello all, I am working on trying to re-create a newsletter using InDesign for a client who had previously done all "design" in Microsoft Word. It's admittedly been awhile since I've done much page layout or work with imposition, and my brain is comp