HomeHub 3 - USB speeds painfully slow - known issu...

Hello I have a BT HomeHub 3 - FW version 12 - on Infinity Option 2.
I have recently bought a WD 2TB external drive and connected it to the USB port on the homehub in the hopes to have all my media on it to share across the network.
It attached fine, was detected fine, and I've successfully mapped it as a network drive on my PC without a problem.
The drive is formatted in NTFS, and my PC is connected to the homehub via the gigabit port.
The read and write speeds though are painfully slow - pretty much solid at 2.0MB/s. Is this just "how it is" or is there a solution, because as it stands I can't see the point in there even being a USB port! I could download another version of the file 4 times faster from the internet than I could copy it locally to the HDD!!
I can't find any information about this or indeed see many complaints, so I'm wondering if this is just mine?
Any feedback would be appreciated - happy to receive technical answers.
Thanks for any help!

Keith, I have to say that your answer gives no technical insight of the situation,
I highly doubt that this device does not have the processing power to do a transfer of more than 2-3 Mb/Sec,
Don't forget there's even a gigabit ethernet port, and you can easily achieve very high speeds using lan or even the internet connection - forget that this is due to the hub being slow - no chance.
Second point you mention, SMB protocol is not that efficient, that's not the reason for slow speeds again. I can confirm I've got an SMB server setup on a Linux 5 yeard old netbook in the Lan and it's still performing faster than 2 Mb / Sec. SMB is again NOT the problem.
It's most likely a firmware issue where the USB port is either throttled down intentionally or not utilized as a proper USB 2.0 port - I think BT or whoever makes this box ought to give the community an explanation on the matter. When claiming that the usb port can be used to connect storage media they should also mention that the maximum speed is not more than 3 Mb/Sec - otherwise the statement is misleading as most people know that usb storage media perform a lot faster when connected to computers.
It's like someone telling you, that his car drives like ferrari, but not telling you that it cannot do more than 20 mph.

Similar Messages

USB is painfully slow all of a sudden

Hey there i have a macbook running 10.4.9 and usb has always been fine until today when times for pulling data off usb have become agonizingly slow. like 30 minutes for 70MB.
EDIT
writing to usb is slow, and i have tried this on flash drives and my usb hard drive.
I have repaired perms..
Message was edited by: kindkind1

hey you guys i fixed it by resetting the smu. turn mb off, unplug power, disconnect battery, hold power button down for 10 seconds, then reconnect battery then power cable and lastly turn it back on. everything is back AOK.

Response Speed painfully slow

I'm at 14,000 words in my script and all views are off, yet the lag time in editing and in cases when I switch functions, such as character to action, can be up to 8-10 seconds. What can I do to improve this situation?? I'm using a MacBook, 2.4 Ghz, 4 GB memory. Snow Leopard.

I fixed my ping and downloadspeed by entering " test" at clientID which i read somewhere on another forum.
I get a steady 28 ms ping and 20 mb/s download but still 0.05 upload ;(

Poor USB Speed Issues

Connecting anything to my machine via USB has become painfully slow. When connecting an iPod to the USB port on the front of the machine, a window will sometimes popup saying "You are connecting to a USB 1.1 port - connect to a 2.0 port to ....etc etc"
It IS a USB 2.0 port - Do the internal USB controllers go bad after a while? My machine has a lot of time on it and cannot think of anything else that could be the cause.
And if so, what do I replace?

Hi. The Apple Official on USB problems is here
http://docs.info.apple.com/article.html?artnum=303598
Although not mentioned there, sometimes using the FireWire reset procedure (bottom of the page here) helps USB
http://docs.info.apple.com/article.html?artnum=88338
USB on G5s has always been a bit suspect where USB power is concerned. Does it work ok plugged into the rear ports? A powered USB hub, such as
http://catalog.belkin.com/IWCatProductPage.process?Product_Id=159070
sometimes helps.
The USB is on the main logic board (as are most things), so a PCI USB card would be required if it is duff.
Good Luck.

HT5521 I have a lightning to usb cable which is 2m in length. Is there any known issues with trying to recharge an iPad 4 with this longer length. It seems to me it is taking much longer than a 1m cord to recharge.

I have a lightning to usb cable which is 2m in length. Is there any known issues with trying to recharge an iPad 4 with this longer length? It seems to me it is taking much longer than a 1m cord to recharge.

Axel,
I'm afraid a new SSD won't be different from your bad USB stick. I had similar issues over USB with both a (no-brand) stick and TWO 64gb Kingston SSDNow's (running Kubuntu 12.04 with Kernel 3.11, ia_64): it all runs exceptionally well (wanna know how it feels like booting in 5 sec?) for a few days - then suddenly you find yourself facing that dreaded (initramfs) prompt. You ask yourself: why? Did I upgrade grub lately? Did I upgrade the Kernel? I don't recall so. Ok, let's fix this... insert favorite live cd, boot, fsck...what???? THOUSANDS of errors??? Hundreds of files and directories corrupted, and the system is unusable - Reinstall everything from scratch onto another drive.
Rinse and repeat: did this 3 times. Then I found this analysis:
http://lkcl.net/reports/ssd_analysis.html
I also suspect USB power interrupts more abruptly than SATA power, at shutdown - basically aggravating any power interruption damages. So now I'm going to:
- buy an Intel S3500!
- add commit=1 to my mount options in /etc/fstab
- edit shutdown procedure to add a 5-10 sec pause after unmounting drives.
Just my two cents.
Andrea
Last edited by andreius (2013-12-29 16:51:04)

Since upgrading to Mavericks, Mail is extremely slow to load preview pane or show email when mailbox is double-clicked. Is this a known issue?

Since upgrading to Mavericks, Mail is extremely slow to load the preview pane or show email when mailbox is double-clicked. Is this a known issue? Or is there a solution to this issue?

Hi AngieLynch,
Thanks for visiting Apple Support Communities.
It sounds like you're seeing some unexpected behavior in Mail.
Before troubleshooting on your computer, I'd strongly recommend backing up your data to an external hard drive with Time Machine, if you haven't already. This article can help with setting up Time Machine:
Mac Basics: Time Machine backs up your Mac
http://support.apple.com/kb/ht1427
Next, try creating a new user account on your computer. You can add your email account to Mail in the new user account. If Mail is more responsive in the new user account, then Mavericks is working fine and the behavior is caused by conflicts in your own Mail or user account.
These articles walk you through creating a new user and setting up Mail:
OS X Mountain Lion: Create a new user account (applies to Mavericks, too.)
http://support.apple.com/kb/PH11468
Configuring Mail for your email account
http://support.apple.com/kb/HT1277
Best,
Jeremy

Are there any known issue with the HP 3005pr USB 3 replicator ?

Hi,
I recently ordered an HP laptop Pavilion dv6t-7000 with Intel i7 and nVidia video. While the unit isn't due to arrve for about 2 weeks, I'm looking for a docking station/port replicator.
Are there any known issues with the HP 3005pr USB 3 replicator ? Does it fully support Win7 64 bit? I am also considering the Targa U3 unit, but I'd prefer HP if I can be assured that it works.
I'd like to be able to leave the laptop closed when at my desk so I can use an external keyboard, mouse, and monitor.
Does HP make this device or does a 3rd party make it for them?
I've read so many stories on various forums regarding these things.
Any suggestions from HP or others? I need to order something soon, but I don't want head aches when it arrives.
thanks,
Steve

This HP USB 3.0 Port Replicator fully supports with Windows 7 64-bit, if that is the one that you are talking about.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Howto speed up painfully slow computer???

I have a 12" powerbook g4 that was the last model before the intel macs. it has a 1.5 Gig processor and 512 megs of ram. it has an 80 gig HD with 15 gigs free.
it is painfully slow. i don't run a lot of apps at the same time, i have restarted, i have repaired disk permissions and run disk utility. i also ran onyx.
my wife has a pre-intel ibook that has less power but runs significantly faster running essentially the same apps.
how can i speed up my computer?
thank you.

Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.6.1 is Leopard compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that presently AppleJack is not compatible with Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
8. Data Backup (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.

Just upgraded to OS X Lion. Now Safari behaves erratically. Some sights load at lightning speeds, other load painfully slow or not at all. Any ideas here?

Just upgraded to OS X Lion. Now Safari behaves erratically. Some sites load at lightning speeds I have never seen before, others load painfully slow or not at all. Any ideas here?

I would recommend running Disk Utility (Applications - Utilities - Disk Utility) and Repairing Disk Permissions. Please run this at least 2x. It that doesn't help then post back, there are many other things to try.

My MacBook Pro is running painfully slow all of a sudden. I am trying to clean up my iPhoto library and it's all of a sudden running really slow. I've uninstalled and disabled as many unnecessary apps as possible as far as I can tell.

Here is the etrecheck info. Please advise... thank you!
Problem description:
iPhoto is running painfully slow. My library is on an external hard drive. It was runing just fine yesterday. i disabled Dropbox and a few other applications, to no avail.
EtreCheck version: 2.1.5 (108)
Report generated January 7, 2015 at 12:40:17 PM EST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:55:4
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (54.79 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Seagate Backup+ Desk 4 TB
disk2s1 (disk2s1) <not mounted> : 262 KB
Seagate Backup Plus Drive (disk2s3) /Volumes/Seagate Backup Plus Drive : 4.00 TB (2.73 TB free)
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Logitech USB Receiver
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.logmein.driver.LogMeInSoundDriver (4.1.46f67) [Support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.3 - SDK 10.4) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.3 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.3 - SDK 10.5) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.3 - SDK 10.4) [Support]
Startup Items: ℹ️
ProTec6b: Path: /Library/StartupItems/ProTec6b
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[loaded] com.citrix.AuthManager_Mac.plist [Support]
[running] com.citrix.ReceiverHelper.plist [Support]
[running] com.citrix.ServiceRecords.plist [Support]
[invalid?] com.logmein.LMILaunchAgentFixer.plist [Support]
[not loaded] com.logmein.logmeingui.plist [Support]
[not loaded] com.logmein.logmeinguiagent.plist [Support]
[not loaded] com.logmein.logmeinguiagentatlogin.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[not loaded] com.gopro.stereomodestatus.plist [Support]
[not loaded] com.logmein.logmeinserver.plist [Support]
[invalid?] com.logmein.raupdate.plist [Support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.sharpcast.xfsmond.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
Dropbox Application (/Applications/Dropbox.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
ThisLife Uploader ApplicationHidden (/Applications/ThisLife Uploader.app)
WDQuickView Application (/Library/Application Support/WDSmartWare/WDQuickView.app)
Internet Plug-ins: ℹ️
LogMeInSafari64: Version: 1.0.586 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
LogMeIn: Version: 1.0.586 [Support]
Silverlight: Version: 4.0.60831.0 [Support]
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
LogMeInSafari32: Version: 1.0.586 [Support]
CitrixICAClientPlugIn: Version: 11.8.0 - SDK 10.7 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
Picasa: Version: 1.0 [Support]
Safari Extensions: ℹ️
Evernote Web Clipper [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
GoPro [Support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 264.06 GB
Destinations:
Seagate Backup Plus Drive [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 264.06 GB X 3)
Top Processes by CPU: ℹ️
      8% WindowServer
      2% Safari
      1% mds
      1% loginwindow
      0% AppleSpell
Top Processes by Memory: ℹ️
2.13 GB iPhoto
610 MB Image Capture Extension
155 MB mds_stores
129 MB Safari
129 MB Finder
Virtual Memory Information: ℹ️
48 MB Free RAM
3.71 GB Active RAM
3.68 GB Inactive RAM
1.04 GB Wired RAM
6.89 GB Page-ins
293 MB Page-outs
Diagnostics Information: ℹ️
Jan 7, 2015, 12:28:48 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-122848_[redacted].cpu_resourc e.diag [Details]
Jan 7, 2015, 12:13:08 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-121308_[redacted].hang
Jan 7, 2015, 12:07:39 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-120739_[redacted].cpu_resourc e.diag [Details]
Jan 7, 2015, 12:02:48 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-120248_[redacted].hang
Jan 7, 2015, 11:51:45 AM /Library/Logs/DiagnosticReports/iPhoto_2015-01-07-115145_[redacted].cpu_resourc e.diag [Details]
Jan 7, 2015, 11:45:54 AM Self test - passed
Jan 6, 2015, 05:01:58 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-01-06-170158_[reda cted].crash
Jan 5, 2015, 02:12:40 PM /Library/Logs/DiagnosticReports/iPhoto_2015-01-05-141240_[redacted].cpu_resourc e.diag [Details]
Jan 5, 2015, 10:04:15 AM /Library/Logs/DiagnosticReports/com.apple.MediaLibraryService_2015-01-05-100415 _[redacted].cpu_resource.diag [Details]
Jan 4, 2015, 05:28:20 PM /Users/[redacted]/Library/Logs/DiagnosticReports/HandBrake_2015-01-04-172820_[r edacted].crash
Jan 4, 2015, 05:28:04 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-01-04-172804_[reda cted].crash
Jan 4, 2015, 03:09:50 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Finder_2015-01-04-150950_[reda cted].crash
Jan 4, 2015, 03:09:15 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-01-04-150915_[reda cted].crash

Start time: 15:08:00 01/08/15
Model Identifier: MacBookPro6,2
System Version: OS X 10.10 (14A389)
Kernel Version: Darwin 14.0.0
Time since boot: 1 day3:22
Memory
    BANK 0/DIMM0:
      Size: 4 GB
      Speed: 1067 MHz
      Status: OK
      Manufacturer: 0x859B
    BANK 1/DIMM0:
      Size: 4 GB
      Speed: 1067 MHz
      Status: OK
      Manufacturer: 0x859B
SerialATA
   Hitachi HTS545032B9SA02
USB
   Backup+ Desk (Seagate LLC)
   USB Receiver (Logitech Inc.)
FileVault: On
Diagnostic reports
   2014-12-17 Safari crash
   2014-12-17 com.apple.appkit.xpc.openAndSavePanelService crash
   2014-12-17 garcon crash x4
   2014-12-27 Finder crash
   2014-12-27 ThisLife Uploader crash
   2014-12-27 garcon crash x2
   2014-12-28 Finder crash
   2014-12-28 garcon crash x3
   2014-12-31 com.apple.appkit.xpc.openAndSavePanelService crash
   2014-12-31 garcon crash
   2015-01-02 Finder crash
   2015-01-02 garcon crash
   2015-01-05 Finder crash
   2015-01-05 HandBrake crash
   2015-01-05 garcon crash x2
   2015-01-07 garcon crash
   2015-01-08 iPhoto hang x2
Log
   Jan 7 11:47:39 com.apple.xpc.launchd.domain.user.55: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
   Jan 7 11:47:43 com.apple.xpc.launchd.domain.user.202: Could not read path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
   Jan 7 11:47:43 com.apple.xpc.launchd.domain.user.202: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
   Jan 7 11:47:58 com.apple.xpc.launchd.domain.user.89: Could not read path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
   Jan 7 11:47:58 com.apple.xpc.launchd.domain.user.89: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
   Jan 7 11:48:38 jnl: disk2s3: replay_journal: from: 50180096 to: 50778112 (joffset 0x3a3c000)
   Jan 7 11:48:39 jnl: disk2s3: journal replay done.
   Jan 7 11:49:37 com.logmein.LMILaunchAgentFixer: Service setup event to handle failure and will not launch until it fires.
   Jan 7 11:49:39 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.319: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
   Jan 7 11:49:39 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.319: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
   Jan 7 11:49:39 com.citrix.ServiceRecords: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.citrix.Beacons
   Jan 7 11:51:29 process iPhoto[248] thread 2450 caught burning CPU! It used more than 50% CPU (Actual recent usage: 52%) over 180 seconds. thread lifetime cpu usage 90.109268 seconds, (87.476202 user, 2.633066 system) ledger info: balance: 90008641218 credit: 90014455352 debit: 5814134 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 172082865204
   Jan 7 11:52:49 com.apple.xpc.launchd.domain.user.99: Could not read path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
   Jan 7 11:52:49 com.apple.xpc.launchd.domain.user.99: Failed to bootstrap path: path = /Library/LaunchAgents/com.oracle.java.Java-Updater.plist, error = 2: No such file or directory
   Jan 7 12:07:36 process iPhoto[490] thread 12067 caught burning CPU! It used more than 50% CPU (Actual recent usage: 93%) over 180 seconds. thread lifetime cpu usage 90.200179 seconds, (88.682346 user, 1.517833 system) ledger info: balance: 90012025000 credit: 90016246356 debit: 4221356 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 96436947650
   Jan 7 12:19:32 com.apple.xpc.launchd.domain.pid.quicklookd.536: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. app
   Jan 7 12:21:38 process WindowServer[134] caught causing excessive wakeups. Observed wakeups rate (per sec): 174; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 130324
   Jan 7 12:24:23 process Image Capture Ex[494] caught causing excessive wakeups. Observed wakeups rate (per sec): 1570; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45166
   Jan 7 12:28:45 process iPhoto[643] thread 21591 caught burning CPU! It used more than 50% CPU (Actual recent usage: 90%) over 180 seconds. thread lifetime cpu usage 90.114637 seconds, (88.373536 user, 1.741101 system) ledger info: balance: 90002127665 credit: 90005648813 debit: 3521148 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 99086317519
   Jan 7 12:30:17 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.655: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
   Jan 7 12:30:17 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.655: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
   Jan 7 13:13:15 process com.apple.WebKit[827] caught causing excessive wakeups. Observed wakeups rate (per sec): 560; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 55866
   Jan 7 20:09:33 process iPhoto[643] caught causing excessive wakeups. Observed wakeups rate (per sec): 198; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 269536
   Jan 8 01:12:04 AppleUSBMultitouchDriver::validateChecksum - 512-byte packet checksum is incorrect (expected 0xf60c, checksum bytes were 0xdead)
   Jan 8 15:06:18 com.apple.xpc.launchd.domain.pid.quicklookd.1302: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/QuickLook.framework/Versions/A/Resources/quicklookd. app
Memory: iPhoto (UID 501) is using 2093 MB
kexts
   com.logmein.driver.LogMeInSoundDriver (4.1.46f67)
Daemons
   com.adobe.fpsaud
   com.apple.installer.osmessagetracing
   com.logmein.raupdate
   com.macpaw.CleanMyMac2.Agent
   com.sharpcast.xfsmond
Agents
   com.adobe.ARM.UUID
   com.apple.AirPortBaseStationAgent
   com.apple.photostream-agent
   com.citrix.AuthManager_Mac
   com.citrix.ReceiverHelper
   com.citrix.ServiceRecords
   com.google.keystone.user.agent
   com.logmein.LMILaunchAgentFixer
Startup items
   /Library/StartupItems/ProTec6b/DemoOver
   /Library/StartupItems/ProTec6b/Nalpeirond6b
   /Library/StartupItems/ProTec6b/ProTec6b
   /Library/StartupItems/ProTec6b/StartupParameters.plist
dylibs
   /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/WebKit.dylib
   /Users/USER/Library/Application Support/Google/Chrome/WidevineCDM/1.4.6.703/_platform_specific/mac_x64/libwidev inecdm.dylib
   /usr/lib/HDREfexProFC.dylib
App extensions
   com.getdropbox.dropbox.garcon
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist
   - mod date: Jun 7 11:58:25 2013
   - checksum: 1591517921
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>ServiceIPC</key>
    <true/>
    <key>MachServices</key>
    <dict>
    <key>com.citrix.AuthManager_Mac</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.citrix.AuthManager_Mac</string>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
    </array>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Disabled</key>
    <false/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist
   - mod date: Jun 7 11:58:25 2013
   - checksum: 676087606
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.citrix.ReceiverHelper</string>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
    <dict>
    <key>SuccessfulExit</key>
    <false/>
    </dict>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
    </array>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Disabled</key>
    <false/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist
   - mod date: Jun 7 11:58:25 2013
   - checksum: 1445213025
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>ServiceIPC</key>
    <true/>
    <key>MachServices</key>
    <dict>
    <key>com.citrix.Beacons</key>
    <true/>
    <key>com.citrix.ServiceRecords</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.citrix.ServiceRecords</string>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
    <true/>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
    </array>
   ...and 8 more line(s)
Contents of /Library/LaunchAgents/com.logmein.LMILaunchAgentFixer.plist
   - mod date: Nov 10 20:47:41 2014
   - checksum: 94065829
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Debug</key>
    <true/>
    <key>Label</key>
    <string>com.logmein.LMILaunchAgentFixer</string>
    <key>OnDemand</key>
    <true/>
    <key>ThrottleInterval</key>
    <integer>1</integer>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/LogMeIn/bin/LMILaunchAgentFixer.app/Contents/MacOS/LMILaunchAgentFixer< /string>
    <string>fromlaunchagent</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.logmein.logmeingui.plist
   - mod date: Jan 7 12:05:30 2015
   - checksum: 849719711
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Debug</key>
    <true/>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.logmein.logmeingui</string>
    <key>LimitLoadToSessionType</key>
    <array>
    <string>Aqua</string>
    </array>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/LogMeIn/bin/LogMeInGUI.app/Contents/MacOS/LogMeInGUI</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.logmein.logmeinguiagent.plist
   - mod date: Jan 7 12:05:30 2015
   - checksum: 1227007658
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Debug</key>
    <true/>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.logmein.logmeinguiagent</string>
    <key>LimitLoadToSessionType</key>
    <array>
    <string>Aqua</string>
    </array>
    <key>OnDemand</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/Helpers/LMIGUIAgent.app/Contents/MacOS /LMIGUIAgent</string>
    </array>
    <key>RunAtLoad</key>
    <false/>
    <key>Sockets</key>
    <dict>
    <key>Listeners</key>
   ...and 19 more line(s)
Contents of /Library/LaunchAgents/com.logmein.logmeinguiagentatlogin.plist
   - mod date: Jan 7 12:05:30 2015
   - checksum: 3390435066
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Debug</key>
    <true/>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.logmein.logmeinguiagentatlogin</string>
    <key>LimitLoadToSessionType</key>
    <array>
    <string>LoginWindow</string>
    </array>
    <key>OnDemand</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/Helpers/LMIGUIAgent.app/Contents/MacOS /LMIGUIAgent</string>
    </array>
    <key>RunAtLoad</key>
    <false/>
    <key>Sockets</key>
    <dict>
    <key>Listeners</key>
   ...and 19 more line(s)
Contents of /Library/LaunchDaemons/com.gopro.stereomodestatus.plist
   - mod date: Jan 29 17:22:17 2014
   - checksum: 2319101607
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.gopro.stereomodestatus</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>RunAtLoad</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/GoPro/Tools/StereoModeStatus.app/Contents/MacOS/StereoMod eStatus</string>
    </array>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.logmein.logmeinserver.plist
   - mod date: Jan 7 12:05:30 2015
   - checksum: 1427099528
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Debug</key>
    <true/>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.logmein.logmeinserver</string>
    <key>LegacyTimers</key>
    <true/>
    <key>OnDemand</key>
    <false/>
    <key>ProcessType</key>
    <string>Interactive</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/LogMeIn/bin/LogMeIn.app/Contents/MacOS/LogMeIn</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StandardErrorPath</key>
    <string>/Library/Logs/LogMeIn/stderr.log</string>
    <key>StandardOutPath</key>
   ...and 7 more line(s)
Contents of /Library/LaunchDaemons/com.logmein.raupdate.plist
   - mod date: Nov 10 20:46:56 2014
   - checksum: 3493110929
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.logmein.raupdate</string>
    <key>OnDemand</key>
    <true/>
    <key>RunAtLoad</key>
    <false/>
    <key>KeepAlive</key>
    <false/>
    <key>LaunchOnlyOnce</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/LogMeIn/update/raupdate</string>
    <string>/s</string>
    </array>
    <key>StandardErrorPath</key>
    <string>/Library/Logs/LogMeIn/stderr.log</string>
    <key>StandardOutPath</key>
    <string>/Library/Logs/LogMeIn/stdout.log</string>
    <key>WorkingDirectory</key>
    <string>/Library/Application Support/LogMeIn/bin/</string>
   ...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist
   - mod date: Sep 1 15:15:35 2014
   - checksum: 2214847194
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.macpaw.CleanMyMac2.Agent</string>
    <key>MachServices</key>
    <dict>
    <key>com.macpaw.CleanMyMac2.Agent</key>
    <true/>
    </dict>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent</string>
    </array>
    <key>ServiceIPC</key>
    <true/>
    <key>Sockets</key>
    <dict>
    <key>MasterSocket</key>
    <dict>
    <key>SockFamily</key>
    <string>Unix</string>
    <key>SockPathMode</key>
    <integer>438</integer>
   ...and 8 more line(s)
Contents of /Library/LaunchDaemons/com.sharpcast.xfsmond.plist
   - mod date: May 4 20:28:27 2013
   - checksum: 3377386094
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//ENhttp://www.apple.com/DTDs/PropertyList-1.0.dtd">
   
   <plist version="1.0">
   <dict>
    <key>Disabled</key>
    <false/>
    <key>Label</key>
    <string>com.sharpcast.xfsmond</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/SugarSync/scxfsmond</string>
    <string>-log</string>
    <string>error</string>
    <string>-launchd</string>
    </array>
    <key>Sockets</key>
    <dict>
    <key>Listeners</key>
    <dict>
    <key>SockFamily</key>
    <string>Unix</string>
    <key>SockPathMode</key>
    <integer>438</integer>
    <key>SockPathName</key>
   ...and 14 more line(s)
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
   - mod date: Jul 24 11:11:09 2013
   - checksum: 394026997
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
    <string>semi-auto</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.google.keystone.agent.plist
   - mod date: Nov 30 14:26:35 2014
   - checksum: 4084537214
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.google.keystone.user.agent</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>ProgramArguments</key>
    <array>
     <string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
     <string>-runMode</string>
     <string>ifneeded</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>3523</integer>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
   </dict>
   </plist>
Listeners
   cupsd: ipp
User login items
   Garmin Express Service
   - /Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app
   Dropbox
   - /Applications/Dropbox.app
   Google Chrome
   - /Applications/Google Chrome.app
   ThisLife Uploader
   - /Applications/ThisLife Uploader.app
   WDQuickView
   - /Library/Application Support/WDSmartWare/WDQuickView.app
Safari extensions
   Evernote Web Clipper
   - com.evernote.safari.clipper
Widgets
   iCal
   Earth
Restricted files: 339
Lockfiles: 101
Elapsed time (s): 844
Wow, that's a lot of data for you to sift through, but I suppose you know what you are looking to find. I bet you earned every one of those points. Thanks, Linc. All the folks in the world waiting for me to share their photos with them thank you as well : ) Cathleen

Macbook Air internet connection painfully slow with ethernet.....

Hi all
I am currently staying in a serviced apartment and have a Macbook Air that I have had to connect to the in-house LAN through the USB port (someone on here was kind enough to suggest this - I'm a bit of beginner at all this!). The connection is painfully slow (it claims to be connected but pages in safari don't load, iTunes won't load etc.), but the ancient IBM pc on Windows XP conencts through the same at a good speed.
I am also in a wifi environment but my Macbook Air doesn't connect to anything - it keeps timing out (even when it can recognise several unsecured networks). Can anyone advise?
Message was edited by: kaythomson

Mine is slow too! The Charter tech was here for four hours today, redoing the entire building. Every other Mac and PC here are up to speed. The new Mac Pro Octo has never been up to speed. I really don't have time to put hours into what I suspect will be a dead end. Apple needs to look into this and help us out.

USB port EXTREMELY slow

After experiencing some of the problems with my new 60GB color display (stalling, having to re-format etc.), my iPod to XP/USB connection finally works; however, it's EXTREMELY slow, taking longer than real time to download a song and stalling for an additional minute or so afterwards. Anyone had the same problem? Any help offered?

Do you have USB 2.0 drivers for your computer?
Right click on "My Computer", select "Manage", Select "Device Manager", Expand "Universal Serial Bus controllers", do you see something like "Enhanced PCI to USB Host controller"? Is it there? Does it have a red X on the itty bitty icon?
If it doesn't have "Enhanced PCI to USB Host controller" or "Enhanced PCI to USB Host controller" has a red X on the icon, then you are running at USB 1.1 speed. Which is REALLY, REALLY, slow. Just is.
If you want to try to run at USB 2.0 speeds.
Re-enable the "Enhanced PCI to USB Host controller", right click, "enable"
If you don't have a "Enhanced PCI to USB Host controller", make sure your computer has USB 2.0 (also known as "High Speed USB), check your owners manual. If you computer is supposed to have "High Speed USB", install Windows SP2 (it has the drivers).
Good luck!
Or do what the rest of us have done, connect via Firewire.

DW CS4 painfully slow in W7 64 bit

Hi
I recently built a new core i7 machine with 6GB ram and a solid state hard drive and installed Windows 7 Professional 64 bit on it. I expected it to be very, very fast! Most apps run fine but Dreamweaver CS4 is unusably slow. Every action which involves interraction with windows is painfully slow. Starting the app it takes 20 secs before a splash screen and then another minute before the panels have fully loaded. Opening files takes up to a minute, I've just updated a Library item but can't get it to apply that item to 5 pages.
Previously I was on Vista Ultimate 32 bit with my 3 year old Intel Core Duo machine and CS4 ran fine at perfectly usable speeds.
I've tried setting the app to run in Win XP SP3 mode, no difference.
I've run Adobe updater, there are no updates to be had.
I suspect a problem with the aero interface, but my drivers are all up to date.
Maybe the problem arises from running a 32 bit app on the 64 bit OS?
I use Kaspersky Internet Security 2010, tried running whilst that was disabled, same problem.
I'm at my wits' end. I do a lot of work on DW, but at the moment it is unusable.
Any help gratefully received......
TP

Having the same issues as well - Win7 Ultimate 64-bit, KIS2010 (9.0.0.736), Dreamweaver CS4. Dreamweaver now takes 1-2 minutes before it launches, once I'm finally able to open a file I'm constantly presented with a (Not responding) notice. I'm not unable to even create simple CSS rules - I create and id, click create new rule button, compound selector dialog window opens, I click Ok - then nothing.
Some form of tech support would be helpful on this issue. I've gone through the Russian forums for Kaspersky but I'm not seeing much beyond continually disabling portions of KIS2010 until magically something might work, or might not. I'm fully aware that Adobe will place the blame on Kaspersky, just as Kaspersky will place the blame on Adobe - that being said, those of us having issues, are we all using KIS2010 and experiencing delays? Or, and this is going to be painfully optimistic of me, has anyone gotten the above combination to actually work?

Mac painfully slow over mixed network SMB/CIFS

I am using a Mac mini over a mixed office network. Several network operations are painfully slow. I posted a previous topic when I was using my G5 over the same network. Nothing has been resolved. G5, Mac mini or any Mac are slow over the network.
-photo previews take at least 2 minutes each to view while on a PC the whole drive of previews are instantly seen.
- Entourage common network calendar takes 5-10 minutes to view/update while the same common calender on a PC takes a few short seconds.
- Browsing folders on network drives is slow.
- Transfering files is slow
Basically any work done over the network from the Mac is tediously slow. Burning CD's and hand carry the files to other offices would be faster. The PC's instead all work fine over the network.

This looks very interesting and worth looking into. I've got the info in the hands of our net administrator.
I am making progress. I switched the mac mini from ethernet to airport. That has helped dramatically. A folder of 175 mb that was going to take hours and hours to copy to my local drive (I finally gave up) only took about 2-3 minutes over wireless. Previews of photos now happen in a few short seconds. The Entourage common calendar still takes a while to upload but that's probably an Entourage issue.
Our network administrator is going to string new cable to my office and we'll check the switching as well.
Thanks everyone for your continued help as we solve this issue and rescue the Mac's reputation in a windows environment.
This sounds alot like a duplexing issue, whereby
your macs are connecting eventually to a switch, that
isn't properly auto-negotiating your ethernet speed.
You can try going into the Network preferences and
forcing your mac to either 100 full duplex or 100
half duplex and do some testing. Some Bay
Network and Cisco switches must be set (if they are
managed switches) for fastpath operation where they
will autonegotiate better with equipment like our
Broadcom manufactured network interface cards. I
had the same issue at home with a Netgear switch, I
replaced it with a Dell gigabit switch and the
problem went away.
Power Mac G5 Dual 2Ghz/iBook G4
1.42Ghz Mac OS X (10.4.8) 2.5 Gig, Rad
9800 Pro 256M

10.4 web server painfully slow

We upgraded from Server 10.3 to 10.4.11 (Apache/1.3.33 (Darwin) PHP/4.4.7).
We have a couple of wikis installed (DokuWiki running on PHP, file based - no backend).
While 10.3 did a nice job serving them, 10.4 is painfully slow. What used to load in a few seconds now can take anywhere from 30 - 60 seconds to load.
There appear to be now error.log or access.log entries indicating anythings wrong.
Any idea what I can do to get the speed back?
Thanks...martin

Is serving of static pages slow as well? It looks like DNS issue, mainly if you use users authentication, There is an excellent tool to check apache serving speed named 'ab'
http://httpd.apache.org/docs/1.3/programs/ab.html
Don't use it from the same machine to get accurate results.

HomeHub 3 - USB speeds painfully slow - known issu...

Similar Messages

Maybe you are looking for