HomeHub 5 - apparent firmware flaws which cause en...
I have had Infinity with a HomeHub 5 for four months. My set up is that I have the HomeHub 5 in the centre of my flat, and my computer and various mobile devices are connected by wifi - 2.4GHz for mobile devices, 5Ghz for the computer (2014 MacBook Pro). The system was rock solid for the first three months: I am only 200 metres from the
A month ago I bought a Western Digital MyCloud Network-attached storage (NAS) device. This was attached directly to the HomeHub 5 by a 20cm Cat 5 network cable, and the connection to the computer was therefore via the HomeHub wifi. I returned the MyCloud because the transfer speed was atrociously slow, and my wifi internet connection kept crashing (hub lights flashing orange, BT error messages popping up on all connected devices).
Presuming the problem was with the MyCloud, I then bought a Synology NAS and a 4GB Seagate NAS hard drive. This does support faster transfers (for the first few minutes that file transfers work), but the hub keeps crashing, 'taking down' the entire router - wifi, internet connection, the lot. Interestingly, this behaviour is repeatable: by simply trying to copy a large number of files from my computer to the NAS. Without fail, after a few minutes, the HomeHub crashes: all devices lose their connection, the hub lights start flashing orange. It takes 5-10 minutes for the hub to reestablish the internet connection, bring up the 2.4GHz network, then finally the 5GHz network. My conclusion is that the HomeHub 5 can not properly route traffic within the LAN (as opposed to simply dealing with internet traffic to/from local devices).
My questions are:
1. I regard this as clearly being a problem with the HomeHub 5: it seems unable to route large volumes of data without crashing. To what extent do you agree or disagree with my analysis?
2. Is this a recognised problem with the HomeHub 5?
3. How can I report this to BT technical support teams so that they can replicate the bugs themselves, and hopefully eradicate them in the HomeHub 6 (and hopefully patch the HomeHub 5 firmware)?
4. Any general comments/suggestions/solutions on how I can actually get my Synology NAS working, without going to the expense of an entire new wifi router to replace what I have already paid for the HomeHub to be doing?
Thank you in advance for any advice and information that you can offer.
Ross
Just noticed this thread. For what it's worth I have a 4 bay Synology NAS with 4 Samsung 2TB drives. This is connected to a HH5B (and was connected previously to a HH5A) without any problems at all. So I would say thay whilst there might be a problem with some HH5s it is not true to say that all HH5s suffer from this problem. Perhaps a particular batch had a duff chip or whatever.
Mistakes and embarrasing goofs in e-mails are only discovered when you've sent them!
Similar Messages
-
I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC
I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC. The issue has been reported in Japanese by Microsoft. The translation is:
Phenomenon
In Windows Server 2008 or Windows Vista, you might not be able to log an error appears to apply the new update the following programs, if you try to log on after the restart. • MS12-024 (KB2653956)
• MS13-098 (KB2893294)
Error message displayed is as follows.
Incorrect password or user name
Back to the top | feedback
Collapse image Cause
This behavior occurs when you apply the update KB2653956 in the state of some data is damaged following registry key, or does not exist.
HKEY_LOCAL_MACHINE \ SCHEMA \ wcm :/ / Microsoft-Windows-CoreOS? ...
Any string will contain the part of the ... Note:. Also, make sure to load the SystemRoot% \ system32 \ SMI \ Store \ Machine \ SCHEMA.DAT file% if the HKEY_LOCAL_MACHINE \ SCHEMA does not exist.
When you apply the update of KB2653956 in the state where the registry key is not present, the value of the following registry is changed to MINWINPC, logon will not be able to.
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ActiveComputerName
• HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ComputerName
Back to the top | feedback
Collapse image Solution
If this occurs, change to the correct computer name the value of the ComputerName registry and ActiveComputerName start in safe mode, has been mentioned above, and then restart.
Back to the top | feedback
Collapse image Workaround
To prevent this phenomenon occurs, you download and run the System Update Readiness Tool from the following KB.
http://support.microsoft.com/kb/947821
By performing the system update Preparation tool registry that is described in Section Symptoms are repaired.
If the repair is made, starting with log Recreated missing key as the following WinDir% \ Logs \ CBS \ CheckSUR.log file% is recorded.
Recreated missing key:? Wcm :/ / Microsoft-Windows-CoreOS ... \ metadata \ elements \ ComputerName
In addition, regardless of the presence or absence of entry damaged Microsoft-Windows-CoreOS, you can set the value of the ComputerName key in this tool. For this reason, the following log is recorded in the CheckSUR.log.
Recreated value: @ _type.
Recreated value: @ dataOnly.
Recreated value: @ default.
Recreated value: @ description.
Recreated value: @ displayName.
Recreated value: @ handler.
Recreated value: @ legacyName.
Recreated value: @ legacyType.
Recreated value: @ migrate.
Recreated value: @ scope.
Recreated value: @ xsd: type.
Back to the top | feedback
Note: This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. It contains information in response to emerging issues are listed. As a result of the speed of information provided may be
typographical errors are included in the article, you might be revised at any time without prior notice. For other considerations, and use conditions
Please refer to.
Back to the top | feedback
Collapse image Property
December 11, 2013 - Revision: - Last Review: 2901584: 4.0 Document Number
This document that was written about products for.
• Windows Vista Business
• Windows Vista Business 64-bit edition
• Windows Vista Enterprise
• Windows Vista Enterprise 64-bit edition
• Windows Vista Home Basic
• Windows Vista Home Basic 64-bit edition
• Windows Vista Home Premium
• Windows Vista Home Premium 64-bit edition
• Windows Vista Starter
• Windows Vista Ultimate
• Windows Vista Ultimate 64-bit edition
• Windows Server 2008 Datacenter
• Windows Server 2008 Datacenter without Hyper-V
• Windows Server 2008 Enterprise
• Windows Server 2008 Enterprise without Hyper-V
• Windows Server 2008 for Itanium-Based Systems
• Windows Server 2008 Foundation
• Windows Server 2008 Standard
• Windows Server 2008 Standard without Hyper-V
• Windows Web Server 2008
• Windows HPC Server 2008
• Windows Essential Business Server 2008
We are having the issue on hundreds of systems and I am rolling out the readiness tool mentioned above to prevent other systems from being affected. In the mean time I have stopped deploying MS13-098 and am hoping Microsoft will go ahead and let all
of their customers know about the problem instead of just one country. Hopefully the original bulletin will be updated with this known issue.PPoj,
Apple has offered replacement or pro-rated refunds in the US as a settlement of a class action lawsuit, not because of pride in their design-centric approach to their products. If you seek a similar replacement/refund program in India, then the odds are pretty good that you’d need a similar legal approach with which to convince Apple to offer a similar program there. If you’re unwilling to wait for such an event, then you can purchase a replacement power cable now, and hope for a pro-rated refund at some point in the future. -
My iPod touch will not shut down automatically which causes my battery to drain within hours? HELP
Have you went to Settings>General>Auto-Lock and specified a shot time?
-
How to find out the line which caused the runtime error in a SP?
We have a situation like this.
We are consulting company doing consultancy services on Oracle technologies.
One of our clients have PL/SQL stored package.
We found out by debugging the Oracle Forms front-end application that
error is generated by a procedure inside this package.
Problem is that this procedure has over 6000 lines.
How do we figure out the line which caused the error?
We tried putting messages in between, but not have been successful.
Any help would be greatly appreciate.How do we figure out the line which caused the error?
We tried putting messages in between, but not have been successful.
What does that mean exactly?
Typically you would instrument the code (especially for multi-step ETL/transform processes) to capture/log key information.
Also, key sections of code would also be in their own BEGIN/EXCEPTION/END block so that you would know what block caused the exception.
step_num NUMBER; -- what step is being executed?
BEGIN
step_num := 1;
. . . do something
step_num := 2;
. . . do something else
EXCEPTION
-- when you get here the 'step_num' variable will have the number of the step that caused the exception. Log it and then handle/reraise it.
END; -
I have Firefox set so that when I start up, I have it set so that it automatically goes to my home page. However when it freezes, which it does on a daily basis, and I have to shut it down and re-start, it automatically goes to the site which caused the problem in the first place.
If I was a hacker, I would probably find it quite fun to design a virus to reintroduce bugs after they had been exterminated - except that Firefox seem to have got there first.Here's how:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''sess''' and pause while the list is filtered
(3) Double-click the '''browser.sessionstore.max_resumed_crashes''' preference and enter 0 (that's a zero) and click OK.
When Firefox resumes after a crash, instead of resuming automatically, it will display a list of your previous windows and tabs and you can deselect problem pages.
(This assumes it wasn't a private browsing session.) -
How to get the error message which causes Synonym Invalid?
Hi,
I created a synonym in USER_B for a table in USER_A.
I have given all priveleges to USER_B from USER_A.
I created a package. In that I am using this synonym. Its working fine.
Today I have seen that.. the synonym is showing as invalid.
Even I recompiled the synonym. But its still showing as Invalid in PL/SQL developer.
Here I would like to see the error message which cause the synonym invalid.
How can I see the error message.?
Thank you,
Regards,
Gowtham Sen.Makes perfect sense. Oracle automatically attempts to revalidate objects when you try to use them.
SQL> create table t (
2 col1 NUMBER);
SQL> create or replace procedure p is
2 x POSITIVE;
3 begin
4 SELECT COUNT(*)
5 INTO x
6 FROM t;
7 end p;
8 /
Procedure created.
SQL> drop table t purge;
Table dropped.
SQL> select status
2 from user_objects
3 where object_name = 'P';
STATUS
INVALID
SQL> create table t (
2 col1 NUMBER);
Table created.
SQL> select status
2 from user_objects
3 where object_name = 'P';
STATUS
INVALID
SQL> exec p
BEGIN p; END;
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "UWCLASS.P", line 4
ORA-06512: at line 1
SQL> select status
2 from user_objects
3 where object_name = 'P';
STATUS
VALID
SQL> Even when the procedure has a problem ... the revalidation takes place. -
When scrolling vertically there is an horizontal line which causes distorsion of the screen. I do not have noticed such concern on my iMac or on my macbook. What happen with the macpro ?
MacPro bought in 2010
MacBook Pro
MacBookPro7,1
Intel Core 2 Duo
2,4 GHz
Nombre de processeurs : 1
Nombre total de cœurs : 2
Cache de niveau 2 : 3 Mo
Mémoire : 4 Go
Vitesse du bus : 1,07 GHz
Version de la ROM de démarrage : MBP71.0039.B0B
Version SMC (système) : 1.62f6
Numéro de série (système) : W804853GATP
UUID du matériel : 716CB476-983B-5C43-B363-988FB608C01C
Capteur de mouvement brusque
État : Activé
System:
Mac OS X 10.6.7 (10J869)
Darwin 10.7.0
Video DIsplay Card
NVIDIA GeForce 320M :
Jeu de composants : NVIDIA GeForce 320M
Type : Processeur graphique (GPU)
Bus : PCI
VRAM (totale) : 256 Mo
Fournisseur : NVIDIA (0x10de)
Identifiant du périphérique : 0x08a0
Identifiant de révision : 0x00a2
Révision de la ROM : 3533
Moniteurs :
LCD couleur :
Résolution : 1280 x 800
Profondeur de pixels : Couleurs 32 bits (ARGB8888)
Miroir : Activé
État du miroir : Miroir matériel
Connecté : Oui
Intégré : Oui
Is that what you asked ? Do you need other data ?
Note that I have also strong distorison when running slides show with iphoto.
Thanks -
Since downloading OS X Yosemite I have been having issues with Netflix. Video slows down which causes the audio to go out of sync. Netflix plays ok on ipad which makes me think it's the software which is the issue. Has anyone else had this issue?
Try this:
Go to System Preferences - Bluetooth. Delete the keyboard from the list of devices by pressing the "-" button. Take the batteries out of the keyboard and reinsert them. In Bluetooth Preferences press the '+" button to add the new device. If the keyboard begins to pair, click the word "pair" and type in the passcode. Press return. The keyboard is now paired.
If the mouse is not pairing, try this: shut down the computer completely, unplug any USB mice, then turn off the power to the bluetooth mouse. ONce the computer starts up again, wait for the pop-up looking for a mouse. Turn on the power to the bluetooth mouse. It should work normally now. -
Web Acceleration Client Error (513) - Internal Error
The Web Acceleration Client detected an internal error which caused the connection between the Web Acceleration Client and Web Acceleration Server to be broken. Retrying the web page may correct the problem.
I get this error continuously when working in the ancestry.com website. I have to reload the page on almost every search I do on that website. This is the ONLY website that I get this error message on, can work continuously for several hours on other websites and never get this message. I've talked to the people at Ancestry.com support and they made 2 recommendations: turn of antivirus (did not help) or switch to another web browser. I tried both IE 11 and Chrome Version 31.0.1650.63 m and I did not have the problem with either of those 2 browsers getting this error.
Is there a problem with how Firefox and ancestry.com are communicating with each other?Hello byron.lewis, many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you. -
my iphone 3g is at 3.1.2 atm and I want to update to its final firmware release which is 4.2.1...will I still be signed by apple servers?
Yep.
-
Sql query problem which causes crystal reports in visual studio to freeze
Anyone know why this query posted here freezes up? if i remove s.enddate IS NULL from the query is when it freezes up. This is used on an infinite campus database for which i only have read only access so no posting anything that requires write access please!
IT may just be a flaw in my query which it has been before but it only stops responding if i remove the above query and it only started this after i added the comments subreport if i remove it then the action above doesn't cause it to freeze in visual studio.
I do have a subreport for comments that is in the report too. Heres the main query:
SELECT Distinct sc.name,sc.address,sc.city,sc.state,sc.zip,sc.phone,gt.name AS Task, ca.StartDate,
ca.EndDate, s.lastname','s.firstname AS Student, s.studentnumber,e.grade,t.name AS Term,
gs.score AS [Current Grade],cg.Cumgpa AS GPA,c.name '-'c.number As Course, se.teacherdisplay,gs.personid,
MAX(CASE WHEN hl.enddate IS NULL AND ccs.guardian = 1 AND ccs.relatedBy = 'Household' AND ccs.mailing = 1 THEN ccs.addressline1 END) AS AddressLine1,
MAX(CASE WHEN hl.enddate IS NULL AND ccs.guardian = 1 AND ccs.relatedBy = 'Household' AND ccs.mailing = 1 THEN ccs.addressline2 END) AS [City/State],gs.personid
FROM GradingScore gs
LEFT JOIN dbo.student s ON s.personid = gs.personid
JOIN v_CensusContactSummary ccs ON ccs.personid = s.personid
JOIN dbo.enrollment e ON e.enrollmentid = s.enrollmentid AND e.calendarid = gs.calendarid
LEFT JOIN dbo.Term t ON t.termid = gs.termid
JOIN dbo.section se ON se.sectionid = gs.sectionid
JOIN v_CumGPA cg on cg.personID = s.personID aND cg.calendarID = s.calendarID
JOIN gradingtask gt ON gt.taskid = gs.taskID
JOIN dbo.course c ON c.courseid = se.courseid
JOIN dbo.roster r ON r.sectionid = se.sectionid
JOIN calendar ca ON ca.calendarID = gs.calendarID
JOIN School sc ON sc.schoolID = ca.schoolid
LEFT JOIN householdlocation hl ON hl.householdid = ccs.householdid
--Change Term Name to match term name needed or if in a report turn it into a Parameter
WHERE s.enddate IS NULL AND gs.calendarID IN
(select calendarid
from dbo.calendar c
JOIN dbo.schoolyear sy on sy.endyear = c.endyear
WHERE c.schoolID = 2)
GROUP BY s.studentnumber,s.lastname, s.firstname,e.grade, t.name, gt.name, gs.score, cg.cumgpa, c.name, c.number, se.teacherdisplay, ca.startDate, ca.enddate,
sc.name, sc.address, sc.city, sc.state, sc.zip, sc.phone,gs.personid
order by [student],[Term],[Course]
Edited by: jeffman2 on Oct 6, 2011 3:40 PM
Edited by: jeffman2 on Oct 6, 2011 3:41 PM
Edited by: jeffman2 on Oct 6, 2011 3:53 PM
Edited by: jeffman2 on Oct 6, 2011 3:56 PM
Edited by: jeffman2 on Oct 6, 2011 3:56 PMWhat happens if you try
SELECT Distinct sc.name,sc.address,sc.city,sc.state,sc.zip,sc.phone,gt.name AS Task, ca.StartDate,
ca.EndDate, s.lastname+','+s.firstname AS Student, s.studentnumber,e.grade,t.name AS Term,
gs.score AS Current Grade,cg.Cumgpa AS GPA,c.name +'-'+c.number As Course, se.teacherdisplay,gs.personid,
MAX(CASE WHEN hl.enddate IS NULL AND ccs.guardian = 1 AND ccs.relatedBy = 'Household' AND ccs.mailing = 1 THEN ccs.addressline1 END) AS AddressLine1,
MAX(CASE WHEN hl.enddate IS NULL AND ccs.guardian = 1 AND ccs.relatedBy = 'Household' AND ccs.mailing = 1 THEN ccs.addressline2 END) AS City/State,gs.personid
FROM GradingScore gs
LEFT JOIN dbo.student s ON s.personid = gs.personid
JOIN v_CensusContactSummary ccs ON ccs.personid = s.personid
JOIN dbo.enrollment e ON e.enrollmentid = s.enrollmentid AND e.calendarid = gs.calendarid
LEFT JOIN dbo.Term t ON t.termid = gs.termid
JOIN dbo.section se ON se.sectionid = gs.sectionid
JOIN v_CumGPA cg on cg.personID = s.personID aND cg.calendarID = s.calendarID
JOIN gradingtask gt ON gt.taskid = gs.taskID
JOIN dbo.course c ON c.courseid = se.courseid
JOIN dbo.roster r ON r.sectionid = se.sectionid
JOIN calendar ca ON ca.calendarID = gs.calendarID
JOIN School sc ON sc.schoolID = ca.schoolid
join (select calendarid
from dbo.calendar c
JOIN dbo.schoolyear sy on sy.endyear = c.endyear
WHERE c.schoolID = 2) ci
on gs.calendarID = ci.calendarid
LEFT JOIN householdlocation hl ON hl.householdid = ccs.householdid
--Change Term Name to match term name needed or if in a report turn it into a Parameter
--WHERE s.enddate IS NULL
GROUP BY s.studentnumber,s.lastname, s.firstname,e.grade, t.name, gt.name, gs.score, cg.cumgpa, c.name, c.number, se.teacherdisplay, ca.startDate, ca.enddate,
sc.name, sc.address, sc.city, sc.state, sc.zip, sc.phone,gs.personid
order by student,Term,Course
Ian -
I accisentally dropped my iphone on the ground causing damaged on the
corder edge of the phone. Can this still be repaired? My phone is still within the first year warranty. I hope to hear from you. Thank youThe standard iPhone warranty does not cover accidental damage. Apple will fix it, but they will charge the full repair cost.
The AppleCare+ warranty for the phone, which you can buy within 30 days of the iPhone purchase, does cover two incidents of accidental damage and repairs are charged at $75 I believe.
Your carrier warranty, if you have one, may cover accidental damage - check with them.
Matt -
((bool) -0.5) mishandled by Sun C 5.9 alpha, which causes configure failure
In <http://lists.gnu.org/archive/html/bug-autoconf/2006-05/msg00027.html>
Bruno Haible reports that Sun C 5.9 alpha for Linux/x86 mishandles the
following test case:
#include <stdbool.h>
char d[(bool) -0.5 == true ? 1 : -1];
This is strictly conforming C99 code, and GCC accepts it, but Sun C
5.9 alpha apparently rejects it with the diagnostic "integral constant
expression expected".
((bool) -0.5) is an integer constant expression, because bool is an
integer type (Bruno's analysis of this particular point is incorrect,
as you'll be able to see when I post my followup to his email). Hence
Sun C 5.9 alpha is buggy.
This bug causes 'configure' to conclude that Sun C 5.9's
implementation of 'bool' is inadequate, and programs typically use
their own (inferior) substitute for 'bool'.
Can you please fix this?
Thanks.
PS. One minor point of terminology. The C standard now uses the term
"integer constant expression", not "integral constant expression". (I
vaguely recall that "integral" was the old term.) So you should
update the wording in your diagnostics.Here is a test case.
============================= boolcast.c =============================
#include <stdbool.h>
char ac[(int) 3.999 == 3 ? 1 : -1];
char am[((int) 3.999 == 3) * 2 - 1];
char dc[(bool) -0.5 == true ? 1 : -1];
char dm[((bool) -0.5 == true) * 2 - 1];
char fc[(_Bool) -0.0 == false ? 1 : -1];
char fm[((_Bool) -0.0 == false) * 2 - 1];======================================================================
$ c99 -Xa -c boolcast.c
"boolcast.c", line 6: integral constant expression expected
"boolcast.c", line 6: zero or negative subscript
"boolcast.c", line 7: warning: can not declare variably modified type at file scope
"boolcast.c", line 9: integral constant expression expected
"boolcast.c", line 9: zero or negative subscript
"boolcast.c", line 10: warning: can not declare variably modified type at file scopeThe argumentation is as follows:
- ISO C 99, section 6.2.5 paragraph 6, says that _Bool is an unsigned integer type.
- ISO C 99, section 6.2.5 paragraph 17, then implies that _Bool is an integer type.
- ISO C 99, section 6.6 paragraph 6, defines the term "integer constant
expression":
An integer constant expression shall have integer type and shall
only have operands that are integer constants, enumeration constants,
character constants, sizeof expressions whose results are integer
constants, and floating constants that are the immediate operands of
casts. Cast operators in an integer constant expression shall only
convert arithmetic types to integer types, except as part of an operand
to the sizeof operator.
This is practically relevant: These kinds of constructions are used by the
GNU autoconf AC_HEADER_STDBOOL macro.
Bruno -
Correction: Bottom left of resulting graphic.
FWIW I don't see that, but I don't think I have in any previous version, either. Here's one photo:
But the best thing would be for you to download the trial and see for yourself, since you know best the exact conditions which are causing it for you. -
External lib call exits on error, which causes Labviews Solaris to exit completely.
I have an external lib which VI's make calls to.
When my function follows the error path, it makes a
call to another lib which does an exit(11).
This in turn causes Labviews 6.0.2 (Solaris 8).
I have the same libs on NT, and Labviews gives a popup
dialog with an error string.
Anyone know how to prevent Labviews from exiting???
I cannot change the 3rd library.
Thanks!> When my function follows the error path, it makes a
> call to another lib which does an exit(11).
> This in turn causes Labviews 6.0.2 (Solaris 8).
> I have the same libs on NT, and Labviews gives a popup
> dialog with an error string.
> Anyone know how to prevent Labviews from exiting???
You might try to install a signal handler. I don't remember the syntax,
but you have to have a C style function pointer, and you call something
like InstallSignalHandler.
You might want to install it, call the faulty function, then set it back
to its initial setting.
Greg McKaskle
Maybe you are looking for
-
Prompting for UserName and Password when I click Report Server Web Service URLs in ssrs 2008 R2
Hi All, I am using SQL Server Reporting services 2008 R2 . When I tried to open report server webservice URL in SSRS 2008 R2 It is prompting username and password. I tried to resolve the issue by deleting the <!-- <RSWindowsNegotiate/> -
-
HELP! SOME .cr2 Files not able to be opened by LR or Adobe
I have about 200 .cr2 files which aren't able to be imported or opened in either LR4, Photoshop CS4 or DNG Converter. I have succesfully imported 3000 files from the same shoot shot across different cards including this particular card. I don't under
-
Printing Addresses for Christmas Cards
How do I print a group of addresses from my iCloud contacts to self-adhesive mailing labels? My computer is a PC.
-
Delete Photos Sync'd from a dead MBP?
I have a collection of photos that were added from my previous Mac Book Pro (it died a horrible death). I would like to remove them from my iPad, but they will not display the Delete icon when they are selected in Photos. How can I get rid of these
-
Outlook 2007: all new appointments default to the Prior Monday as 12AM.
Whenever I create a new appointment and use scheduling assistant it always defaults to the prior Monday at Midnight in Outlook 2007 on a VM ware Virtual Machine running Win 7 Enterprise. This machine is locked down tight - i have no admin rights what