HomeHub and the need for hard wiring

I'm currently planning the wiring for our small extension. I want to be able to use the Smart functions on our TV and in particular download films/programmes and will be switching to BT Infinity to make the experience as painless as possible. My question is, should I run a cable from the HomeHub to the TV to improve its performance or is the Homehub's wireless performance up to the job? Thanks

Sonichedgehog wrote:
Thanks gents. That's what I figured. Just leaves me with the headache of how to route all the cables!
Don`t forget, you can use Powerline adapters, as described on my website.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Question about Photoshop Premier and the need for coreaudio.dll drivers

I downloaded Photoshop Premier Elements. When I run the video edit part of the program, I get an error saying the program cannot find coreaudio.dll and coreaudiotoolbox.dll. I'm using Windows 8.1. Are these drivers necessary? If so, how do I get them? Thx

There is a dedicated forum for Premiere Elements:
Premiere Elements
You'll get the best advice there.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections. For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb. These terrible download speed really only affects the iPhones as my MacBook Pro usually gets the good speed no matter where it is. I don't believe there is anything wrong with my phone because if I am in the part of the house that uses just the extreme the download speeds on the iphone goes up to 50-75mb. As a note I have an AirPort Extreme on the top floor of my house (second floor) that's where my modem is located. On the first floor that's where one airport express is located. I also have another airport express in the basement that is accessed by my landlord. Any thoughts on how to fix this would be helpful.

Is there a way to turn the wireless capabilities off on an AirPort Express? I have an AirPort Extreme as my main router and use the express to just extend it. I only really want to you use the express for hard ethernet connections.
It appears that your networking goals with the AirPort Express is to use it as a wireless Ethernet bridge instead of using it to extend the wireless range of your AirPort Extreme. The latter requires that the Express Wi-Fi radios be enabled.
If you intended to use the Express as a wireless bridge, you just need to reconfigure it to "Join a wireless" network instead of "Extend a wireless network."
For whatever reason when I have my express extend my wifi at home the download speed from just the express is absolutely terrible, drops to about 1.5 mb compared to when it's on the extremes part of the network the speed goes up to 50-75mb.
In an extended network, the placement of the extending base station is critical as it can only extend the wireless network at the bandwidth at which it receives it.
Please check out the following AirPort User Tip for details on optimal base station placement.

I just updated to 10.8 Mountain Lion. Now I must enter my admin password each time I attempt to access my main hard drive. How do I reverse the need for the password. It's a real PAIN!

I just updated to 10.8 Mountain Lion from 10.7.5. Now I must enter my admin password each time I attempt to access my main hard drive. How do I reverse the need for the password? It's a real PAIN!

I'd think you have a Keychain problem (Keychain storing passwords and the likes).
When you are being asked, are you offered the checkbox, "Remember this password in my Keychain"? If so, check and see if it stops asking.

I have an ipod touch 4g. I want to use our internet hdtv as a monitor so others can see my screen in 40". Sony guy said that can do it wirelessly through the internet router instead of Hdmi without the need for an apple tv.Is this true and how do I do it?

As I said above, I want to view my iPod screen on our new 40" Sony Internet full HD TV.
I know that you can do this via HDMI but a Sony guy said that you should be able to do this wirelessly by going through the router. Is this true and can I do this without the need for the Apple TV?
We are soon going to get the airport extreme, so will it work with that?

1. Is it a smart TV?
2. If so.... Is the TV connected to the Internet?
3. If it is.... Check if your iPod and your TV share the same IP address (Wi-Fi network)
4. If they do.... Then you should go to wherever your "Other Media" tab is.
5. After that.... Search for you iPod. Because it is connected to the same network, it should recognize the device they same way AirPrint does.
6. If you happen to see this fail, then try this method:
1. Do you have a Bluetooth-enabled computer/laptop?
2. If so.... Enable the bluetooth on the computer/laptop as well as your iPod.
3. After that.... Your iPod should be actively searching and it should find the computer/laptop.
4. If it did.... Transfer the file onto Windows/Mac (preferably Mac) and find the program to open the file.
5. After doing so.... Connect your computer/laptop to the TV via HDMI Output Cable.
6. Now it should work!

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

Okay, I've figured it out, so I'm going to answer my own question in hopes that it may help anyone else that would like to actually be able to see what they're doing when using Photoshop CC 2014 on a high resolution screen.
1. Open Photoshop.
2. Select Preferences from the Edit Menu, then select General.
3. Change the HUD Color Picker to Hue Strip (Medium).
4. Select Interface from the Preferences menu on the left side of the dialog box.
5. Change the UI Font Size to Large in the Text area of the Preferences dialog box.
6. Select Experimental Features from the Preferences menu on the left side of the dialog box.
7. Select Scale UI 200% for high-density displays (Windows only).
8. Click on OK, then Exit/Quit Photoshop.
9. Open Photoshop and everything should be readable.

HT203433 After reading the sample for Hard Measures and buying and downloading, the downloaded book was missing 9 chapters. Anyone know how to fix this?

After reading the sample for Hard Measures and buying and downloading, the downloaded book was missing 9 chapters. Anyone know how to fix this?

Hi Charles...
Try re downloading the iBook > Downloading past purchases from the App Store, iBookstore, and iTunes Store

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?
Many thanks for any advice.
David

You don't need conversion programs, iTunes can copy most of your content over to the iPad via the file sharing section, and some apps also support Dropbox, email attachments, transfer via your wifi network. There are a number of apps that you can get that support Microsoft office file (microsoft don't make an app versions of their software) e.g. from Apple there are Pages (word support), Numbers (excel) and Keynote (powerpoint), and from third-parties there are apps such as Documents To Go and QuickOffice HD

I just got the new itunes and I can open itunes and see my music but whenI try and go to the itunes store it just loads to a white page. I try and refresh and go to the home page and nothing happens. I can sign into my account and the tabs for the itunes

I just got the new itunes and I can open itunes and see my music but whenI try and go to the itunes store it just loads to a white page. I try and refresh and go to the home page and nothing happens. I can sign into my account and the tabs for the itunes store pop up like they normally would when browsing the itunes store but when I click on one of them, it is a blank page. Is there a setting I need to change? Does it just take an extremely long time to load? Please help!!

Bucktr09:
I'm having the exact same problem. I upgraded to the newest version of iTunes on my iMac and ever since I did the store is a blank white screen. I can get my library content but the store is a no go. Is there any one out there with a solution?

What is the need for setting property data inside the JMSMesage

Hi
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball");
and also please tell me how can the MDB recievies this property data ??
Thanks in advance .

raviprivate wrote:
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball"); Look at the detail JMS documentation on [Message Properties|http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/jms/Message.html] .
>
and also please tell me how can the MDB recievies this property data ?? MDB onMessage method argument is the Message object and if you look at the documentation, Message interface has getter methods to retrieve the properties.

Better provisioning in Windows client: Remember templates for the Start Screen - like the need for categorization (taxonomy) in the Start Menu

Better provisioning in Windows client: Remember templates for the Start Screen - like the need for categorization (taxonomy) in the Start Menu ...
Like my previous suggestion about categories alike Linux to clean up the mess in the start menu:
Please help new users to use the Start Screen in valuable way - demonstrate the value.
You don't sell SharePoint with a completely unorded randomized site hierarchy - and without any templates.
Not content - but abstract content like templates are everything when you need to learn to use ... i.e. a new product like the Start Screen. It gets you started right away. A like Word as well.
Please bring order and form to the content. I.e. T E M P L A T E S parsing the layout of the tiles.
Have context switching for virtualization working with the virtual desktop mode. So I only see those tiles that are in context with my actual workflow.
Of course you would need a well-made taxonomy for apps - i.e. subclassed.

Hello cor-el,
Thanks for your help. The View > Zoom didn't work the first time, but I just tried it again on a couple of web pages and it works great!!
Thanks again. Have a Great Day! You sure improved my attitude!
You RocK!!!
Best regards,
Gael

I have a ipod 4 and I just bought a iphone4 how do i sync apps and the progress for those apps?

I have a ipod 4 and I just bought a iphone4 how do i sync apps and the progress for those apps?

Welcome to Apple Support Communities
You have an Early 2008 Mac Pro. You have the specs that your Mac Pro needs for more memory > https://support.apple.com/kb/HT4433#4 As you can read, that computer should have come with 2 GB of memory.
You can buy memory at OWC or Crucial > http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#800-memory Those sell compatible memory with all Macs. You can use another memory, but you can be sure that the memory that these brands sell are compatible

Does the airport time capsule eliminate the need for my cisco linksys wireless router?

does the airport time capsule eliminate the need for my cisco linksys wireless router?

I understand that your network now looks like this:
Modem > Security Router > Cisco/Linksys router > Devices
If you do not want to use the Cisco/Linksys router and use a Time Capsule instead, then your network would look like this:
Modem > Security Router > Time Capsule > Devices

I've used iMessage for abit now and latly my step dad has got an ipad that is now joint to the same computer and on his ipad is my number and the email for imessage and i want to no how to get it of fully and not just untick it?

I've used iMessage for abit now and latly my step dad has got an ipad that is now joint to the same computer and on his ipad is my number and the email for imessage and i want to no how to get it of fully and not just untick it?

Hi barryfromwarrington,
Welcome to the Support Communities! There are two things I can think of to keep your Stepdad's information separate from yours on the computer and the iPad. On the computer, he should have his own administrative account, and on the iPad he needs his own Apple ID for iTunes and iCloud services. Here is some basic information to get started. I don't know if you have a Mac or Windows computer, so I'll include info for both.)
OS X Yosemite: Set up users on your Mac
http://support.apple.com/kb/PH18891
OS X Yosemite: Set up users on your Mac
If your Mac has multiple users, you should set up an account for each person so he or she can personalize settings and options without affecting other users.
Add a user
Choose Apple menu > System Preferences, then click Users & Groups.
Click the lock icon to unlock it, then enter an administrator name and password.
Click Add below the list of users.
Click the New Account pop-up menu, then choose a type of user.
administrator: An administrator can add and manage other users, install apps, and change settings.
Enter a full name for the new user. An account name is generated automatically. To use a different account name, enter it now—you can’t change it later.
Enter a password for the user, then enter it again to verify. Using a password hint is recommended to help the user remember his or her password.
Click Create User.
For an administrator, select “Allow user to administer this computer.”
Last Modified: Nov 18, 2014
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
http://support.apple.com/en-us/HT203206
Follow the steps below to create a new user account in Windows Vista or Windows 7:
Choose Start > Control Panel.
Open "Add or remove user accounts." (If you're using the Classic view in Windows Vista, open "User Accounts," and then open "Manage another account.")
Select "Create a new account" and follow the instructions to set up the account.
Once you create the new account, choose Start > Log Off.
Log in to the new user account.
Open iTunes and see if the issue you're experiencing persists in this new user account.
Frequently asked questions about Apple ID - Apple Support
http://support.apple.com/en-us/HT204161
iCloud: Set up iCloud
http://support.apple.com/kb/PH2609
Cheers,
- Judy

I want to check the status of application No. For it is written in my account was canceled and I did not do so I urgent news about his condition and the reason for canceled I redial the same time as the sender befo

Thank you for your attention
I want to check the status of application No. W439602096
For it is written in my account was canceled and I did not do so
I urgent news about his condition and the reason for canceled
I redial the same time as the sender before you
We are waiting for you

This is a user to user forum. You are not talking to Apple here. We cannot help you; you will need to contact wherever the order was placed.

HomeHub and the need for hard wiring

Similar Messages

Maybe you are looking for