Homehub Firmware update causes wireless connection...

Firstly I know this is technically a double post but i hadn't realised i had posted in a solved topic.. So from previous posting
I now cannot get wireless connection on a HTC Legend running android 2.2 everything has been working fine for the last 8-9months then after the new firmware that was applied to my homehub on 7/5/11 it all stopped working on the 8th. Before posting i had been into the hub manager and cleared the device list, Changed from WPA to WEP to Nothing and back, tried changing channels etc.
I have also cleared the connection from the HTC legend to no effect. This seems rather too coincidental that the firmware update including "Improvements for smartphones" and it now longer works. I have tested the legend on other wifi networks and all works well so definately not a phone issue. Interestingly my Desire HD still connects ok ot the homehub but runs 2.2.1 not 2.2.
I would like to roll back the firmware to the previous version on the homehub but cannot find anywhere to get the binaries. Can anyone point me to the right location. Or do i have to do a full hardware reset to restore factory firmware. I'm sure that there have likely been updates that i may actually need?
Cheers
Tim

try doing a search on forums to find info on your problem it could help save u time and frustration
to speed things up
heres the relevant link for
see this thread
http://community.bt.com/t5/BB-Speed-Connection-Issues/BT-HomeHub-firmware-upgrade-broken-network-con...
most relevant info towards the pages 7- 8 for u

Similar Messages

Firmware update caused problems with HBD-N790W

Latest firmware update caused my DVD Blu Ray Home Theater to lose the ability to find internet video content. The unit shows that the 12/19 update was successful. I can access the internet and get web browser content--so there isn't anything wrong with my wireless web connection. My unit shows the connection to the internet is working. I made a YouTube video about it:https://www.youtube.com/watch?v=9nqYNNVPcBA&list=UUNQaJbjyKQwFlZXY6832mIA The set-up feature does not work and I lost my video channels (Netflix, Amazon). I don't really understand why my connection to the internet works, my wireless works...everything works except getting updated media channels. I have tried plugging and unplugging cable, modem, wireless, unit, for ten minutes many times. I reconnect the unit to the web...get buttons that say that internet content can be updated...press the button...then the Sony logo and it stops there.

Hi, i work for a Service center for walmart and bestbuy and i have been getting this model in for service for awile now, after a firmware update the systems have reported to work good till there turned off the first time and then they dont book up all the way, you will get a Sony logo at top left screen and the Blue Bluray Logo in the center of the tv screen and thats it, no menu functions the controls on the player it self flash on and off slowly you can turn the system on and off with the remote but thats it, this looks like a failed firmware update but there seems to be no way to reflash these even with the firmware you can get from the sony site you have to burn a CDR disk but becuse there is no menu you cant get that far, i have 19 of these units stacked up 5 have been replaced with other brands to make customers happy, the rest on still in wait for a fix, its looking like replacement of main board will be the next step in this night mare. if sony tech wants to shine some lite on this now i would be very gratefull. Thanks Chris R.

Safari is not connecting to internet on my iPad. Says "could not open the page becuase the server stopped responding." Everything else that updates over wireless connection is working fine. Get same response on any site I try to visit. Need Help!

Safari is not connecting to internet on my iPad. Says "could not open the page becuase the server stopped responding." Everything else that updates over wireless connection is working fine. Get same response on any site I try to visit. Need Help!

I am having identical problem on my iPhone 4 running iOS6. Did NOT experience this issue prior to upgrade.

BT HomeHub firmware upgrade broken network connect...

whatever you guys have done with the latest firmware release on the Homehub 2 has completely messed up my dual-boot Ubuntu-Win7 installation.
Current firmware 4.7.5.1.83.3.18 (Type B)
Last Updated 21/04/11
Ever since Friday when I boot into Win7 then reboot into Ubuntu, Ubuntu cannot aquire an IP address from the router. I have to do a factory reset on the router to get an address. I've 10's of port forwarding setup and this is far from ideal.
What do I do to go back a firmware or who do I contact to get it fixed.
Its a bit pathetic TBH and I'm quite annoyed about this

I've got exactly the same (baffling) problem with my BT HomeHub 2 and Ubuntu 10.10. - worked fine last Wednesday (20th April) and won't work today (26th April). Can see the router just fine but won't connect wirelessly or wired but will connect to BT Open Zone which is enabled on my hub and a couple of other hubs nearby. The OpenZone connection is full strength (which is my hub) - none of the neighbouring connections has ever been a full strength signal. Very odd.
Checked to see if it was my Ubuntu set up by running the machine off the installation disk and got exactly the same symptoms. My HomeHub also updated its firmware some time on the 21st April so, given that nothing else has changed (my windows 7 laptop has continued to work flawlessly) I am driven to the conclusion, like other correspondents here, that the HomeHub update is the culprit.
Ubuntu is growing and it would be good to see BT do some work on this quickly.

4.7.5.1.83.3.37 (Type B) firmware update causing p...

It seems as though everything is pointing at me to get a new router and ditch the BT home Hub 2.0
I've had another problem crop up since I was last here.
I have followed the instructions that were given to me in my previous thread and ensured that nobody touches the router while we try to get our connection taken off the "fixed rate" thing.
Things were going good and I had over 2 full days of connection time. But shortly after the 2nd day I happened to notice the upgrade light on the router was light up. After it went out I logged into the router out of curiousity and confirmed that it had updated right then with a new firmware:
Current firmware
4.7.5.1.83.3.37 (Type B)
Last updated
03/07/12
Later on I then noticed that my laptop was no longer connected and when selecting the option to connect to my wireless network I see that the wireless names had changed to "BTWiFi-with-FON" and "BTWifi". My main wireless connection was unchanged.
Since this upgrade I have found that my connection wo'nt go a day without ending up restarting. Also, my connection to my wireless seems to disconnect me if I sit idle for too long (this is a guess as I am not entirely sure)
Has anybody else had this problem or received this firmware update?
I try to make sure that my internet is not restarted only to have BT push out an update that ensures that it keeps happening...UGH

BT are updatig the hub's firmware so that the ssids for BTFON and BTOpenzone-H are changed to the new brand name (BTWifi). You will now see BTWifi-with-FON and BTWifi. Your personal wifi, eg BTHub3-XXXX or BTHomeHub2-XXXX will stay the same.
With your line being 2.9km long the firmware upgrade automatically restarts the router, which could have caused a slight change in noise margin but after 3+days should sort it self out.
You can check your status on BTWifi (BTFon) by visiting https://www.bt.com/wifi/secure/index.do
You can also opt back in and then back out again which will hopefully get ride of BTWifi (might take a few days for changes to apply)
cheers,
James
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

2.0 Firmware update: router & car connection successes, failures & warning

1. I found out that my Touch doesn't see the network on my Airport extreme 802.11n operating on 5GHz in a mixed Airport Extreme network. It does, however, see & connect to an attached Airport extreme 802.11g operating on 2.4GHz (with WPA2). Conclusion: Maybe the Touch can't connect to routers operating on 5GHz. Has anyone had any success with routers operating on 5GHz?
2. After installing the firmware update, my Touch stopped working with my car's Alpine iPod radio that I had been using for over a year with the Touch without any problems. It detected the iPod, but kept on "searching" without any success. I'll try another iPod tomorrow, but I'm sure the radio is OK. That's a problem as I doubt that the radio manufacturers will come up with software updates to accommodate Apple's iPod firmware updates. Has anyone else experienced this kind of problem?

No video and audio dropouts with my 2G touch. 2G Nano works fine. Alpine Tech help's pointing the finger to Apple.

Firmware update causes mac book pro to not respond

Hi all. I was hoping someone could help me out please? I just ran the latest firmware update for my 2011 mac book pro and after it installed it now won't start up, only getting to the gray screen before freezing there.
I've tried all the on line solutions I can find on Apple's site, but no luck. Can anyone please tell me how I can fix this??
Thanks heaps.

See gray screen
https://support.apple.com/kb/TS2570
Hold the shift key down upon boot, this will perform checks and disable any third party kext files installed into OSX and called a Safe Boot.
(Kext files can also be installed by software itself and if you have it auto-launcing at log-in that could cause a freeze.)
Once in, copy your personal data off the machine to a external storage drive (in addition to TimeMachine if your using it) and disconnect.
Go around and update all your third party software, or remove some that don't have a update and do have kext files in the System/Library/Extensions folder (use the devleopers uninstaller preferred)
If that fails then hold c boot off the 10.6 disk (or command r boot into 10.7 recovery) and simply reinstall OS X, this will replace OS X only with a fresh copy, then software update.
If that fails, then you likely have a failed firmware install, you can install it manually
https://support.apple.com/kb/HT2213
https://support.apple.com/kb/HT1237
If that fails, you'll have to take your machine in for service and get the logicboard replaced.
If OS X boots, but you can't log in or have a problem after logging in, it's likely a third party program or user account issue, create another user account and test again when your problem occurs. If you can't log in, there is a trick to create a new admin account at the command s boot.

Aluminum keyboard firmware updater caused my Mac not to boot.

After installing the recent (4/8/08) keyboard firmware update, my iMac G5 refused to boot past the grey apple screen, too. Got the spinning paddle, but multiple hard shutdowns and restarts failed to get it past that point.
I ended up booting the Leopard Install DVD and tried to reboot into my backup, a Superduper clone of the drive from the previous night. Wouldn't do it -- got the same result.
Used Disk Utility (on the Leopard DVD) to repair the disk/permissions. The only significant repair was this:
permissions differ on "private/var/log/secure.log," should be -rw-------, they are -rw-r-----.
Now, I don't know what that means, but maybe it's relevant.
I rebooted -- and still was unable to get past the grey screen. I tried repairing permissions a second time (and nothing unusual came up) and it still failed to fix the startup problem. I also used the repair disk function (between permissions repairs) and that had no effect, either.
Ultimately, I was forced to do an archive and install of Leopard, which then allowed me to boot successfully.
Really disappointing -- this is the kind of thing I expect Windows users to have to deal with, not us.

I have MacMini with Wired Aluminum Keyboard. I have all the current Firmware and Software updates. The computer will not startup with the install disc using the "C" key nor will it start up with my second attached hard drive using the "Option" key. Now if I use my old Black Apple Keyboard both of these functions work beautifully.
The real problem is the lack of knowledge about this on the part of Applecare and the Geniuses at the Apple Store. They don't even know about these discussions on the Apple Site nor any other internet site that is discussing or has discussed this issue.
I wasted 2 hours with Applecare. They had me do the usual things such as resetting the Pram, disconnecting all cables and resetting the startup manager. You name it they just follow the book and waste your time and theirs.
Their final conclusion was that my keyboard was defective so they made an appointment for me to bring it into the Apple Store. The Genius in the Apple Store hooks my keyboard up to another computer. I don't remember which model it was but I know it was not a Mac Mini. Anyhow he comes back and tells me my keyboard is fine. He says the RAM in my Mini has gone bad. So I replace the RAM. Still have the same problem.
Well unless someone in this discussion group can tell me what the REAL problem is, I will keep my old Black Keyboard close by.

HT3957 Firmware update causes nightmare

I installed this firmware update to try and get my camera working again but after installing not only does my camera still not work but I no longer have bluetooth. In System Profile, Bluetooth is Not Available. Any ideas? HELP!!!

Hi Wangwei,
Your sollution works, however, before contacting you on the Lenovo support forum, I already tried to shut down the Lenovo weather app because I thought this was blocking my calender. So I moved the weather application from my desktop to the garbadge (shame on me, I know), but now I can't see the weather, location and hour on my "Love Corner" desktop anymore although the app Lenovo weather is active as the process "com.lenovo.lewea is running and the service is up. In case there would be a simple solution to restore this (reselecting the theme doesn't work), I would really appreciate if sombody could tell me and otherwise I just try to set the factory settings after backing up my data.
I don't know if it really necessary, but to help out some people who are not that aware of mobile phone settings, it might be usefull to give a more detailled problem solving overview as the there are a couple of weather apps running and to find "all apps" and how to close them and empty the data, it might be difficult for some people who just by the phone because they want a reliable and good looking cell phone with two sim cards and expandable memory options.
I'm happy that my calender is up and running without any loss of data and if allowed, I will reply on the same problem in other forums with a link to your answer or this topic.
Thanks a lot Wangwei for your help and sorry for my late replies.

Firmware update caused problems with G4 AGP

Greetings all,
I have a great G4 Sawtooth 400MHz which I intended to upgrage by installing an OWC 1.2GHz processor using the 7455 chip which I was informed did not necessitate a firmware update to 4.2.8. After installing it, the machine would turn on but would not boot. OWC tech confirmed that I did indeed need to update firmware to 4.2.8 and that this had to be done while running under OS 9.2 which resides on one volume of my partitioned hard drive while OS 10.4.10 is on another volume. I reinstalled the 400MHz processor, changed the startup disk to OS 9.2 and carefully following Apple's proceedure successfully upgraded the firmware which now reads: $0004.28f1. All this went off without a hitch of any kind. OS X was then selected as the start up disk but the machine will only start up in 9.2.2 no matter what I do.
Attempts to boot from the OS X Install DVD holding down C key simply results in a blinking "?" mark indicating that OS X is not deemed to be a useable OS. This is confirmed by opening the DVD on the desk top after booting into OS 9.2 and choosing "install OS X". A message then appears : "Mac OS X cannot be installed on this computer. Please consult the documentation for the list of supported computers."
Other anomalies are: Only an instant of start up chime occurs. Of the 312MB installed only 64MB is recognized. System profiler indicates PC100-322S is recognized but the PC100-222S is "Not compatible". Sometimes the startup device is shown to be the volume containing OS X but the top disk shown on the Desktop proves to be the OS 9.2 volume. Only a quick LED wink of the caps lock key occurs when attempting to reset PRAM, no audible chimes. Starting with option key down produces an image of the two volumes and arrows but does not permit selection and will not proceed from there. Attempting to boot from a firewire drive with several bootable OS X volumes does nothing more. Booting from a Norton Systemworks 2.0 CD to check the OS 9.2 volume for errors changed nothing.
I have removed the battery for two hours before reinstalling with no effect. The battery is at full voltage of 3.6V. I have reset the S1 switch (PMU I think?) several times. I have started in open firmware to reset-nvram, set-defaults, reset-all. Nothing, absolutely nothing I have done changes a thing.
The machine is usless to me running only on OS 9 so I would be grateful for any suggestions or information as to how I could install an earlier version of firmware which may again run OS X as it has for many years. Although I think the problem is that it now identifies itself as a very early processor type which is not compatible with either the ram installed or OS X but I don't know how to tell the thing diffrent!
Thanks
Message title was edited by: Host

Thanks Dave,
You are a genius. I can't tell you how much I appreciate being benifit of your knowledge and willingness to share it with others. A thousand times over, thank you!! I burned the little utility to a CD on another machine/setup, ran the little sucker and restarted in OS X like a hoot!!! About 8 minutes later I had the processor upgrade installed and see quite an improvment. Again, thanks and kudos be upon you,
James

EFI Firmware Update causes RSS? Please help!

Hello,
My macbook has never had RSS (random shutdown syndrome) so installing the SMC update didn't fix anything (there was nothing to fix). A few days later the EFI firmware update came out. I installed that and everything seeemed to work fine until...my macbook shut down intermittenly. When I went to reboot it, it quickly flashed a folder with a question mark in it before starting up just like any other startup with the apple logo and everything. I belive the folder with the question mark means that it can't locate the hard drive...but it does..and works fine. Anyway, my macbook seems to now have RSS and shuts down after a period of about 20 minutes or more (running on battery power with out anything plugged in). I would then boot the computer back up to find the same folder with a question mark flash before booting up normally. I have yet to experience it shutting down with my display/keyboard/mouse/power plugged in. Please help!
Sincerely,
Jason
Macbook 2GHz 2GB Ram 120Gig HD Mac OS X (10.4.8)

For the question mark problem, go to System Preferences > Startup Disk and make a selection.
For the shutdown problem, have you calibrated your battery recently?
http://docs.info.apple.com/article.html?artnum=86284
Just before it shuts down, does it show low or high battery % charged?

7.5.2 firmware update causes samba read performance to be slow.

Anybody has a resolution for following problem. With 7.4.1 I had an acceptable wireless speed to my macbook, from 2 different samba mounts directly connected to the airport extreme: one nas over gigabit, one linux machine on 100mbit.
After updating to 7.5.2 the write performance is still good but reading from either the nas or the linux machine is a factor of 100-1000 slower then the write performance.....
Does anyone has a link to download the old firmware (7.4.1)? which seems not to be downloadable from the support page.
Any tips or tricks?

In Airport Utility, click to highlight your Airport Extreme. In the right hand side, click on "Manual Setup". In the summary tab, place your mouse pointer above "Version" in the version number area. You will see the word turn into a link (gray highlight with a little arrow inside it). Click on this and a drop down menu will appear which will let you revert to a prior firmware version.

IOS4 4.1 firmware update causes camera function to malfunction

After updating to firmware 4.1, the camera function is not working properly.
The images taken are not in a red hue from the normal picture. Is there anyway to fix this or should I revert back to the previous firmware?

Update on my prior post. I used Disk Utility and Disk Warrior on each of the four disks that were connected to my AEB. DU and DW found and fixed damage on every disk. While that was going on, I reverted to firmware 7.3.2. Reconnected my disks to the USB hub, connected the hub to the AEB and all four disks show up just as they did before the 7.4.1 update.
Using the retrospectoscope, I should have disconnected the USB devices before applying the update. Think I will stick with 7.3.2 for the foreseeable future.

!Firmware update without internet connection

I want to upgrade my firmware version.Mine is N72.
But I don't have internet connection.
Is that possible to upgrade offline?
Any suggestion?
Thanks .

No it's not possible to update firmware without an internet connenction.
However you can visit a nokia care point and they will update it for you. It will be free if your phone is still under warranty (2 years in europe, 1 year elsewhere). If it's not under warranty it may still be free or they might be a small charge.
Care points:
UK
http://www.nokia.co.uk/A4228006
Europe:
http://europe.nokia.com/A4388379
Elsewhere:
http://www.nokia.com and select your country.

Recent security update causes internet connection to fail

Ever since the most recent security update last week (2015-003?) my internet connection drops and won't come back until a restart. It appears to be connected but I cannot reach the web, regardless of the browser I choose. Any ideas?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1303 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 475 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %d more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'size (B): %d\n    '"${k[22]}"'checksum: %d\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { if(a[2]) next;split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n    "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"stat -f%z "F|getline S;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,S,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub(/["\\]/,"",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;} END { if(i) print h;for(j=0;j<'${p[24]}';j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|succ|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|s ful|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*{,/*} .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} '~ "kMDItemKind=Package"' '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0;    };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 38;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Homehub Firmware update causes wireless connection...

Similar Messages

Maybe you are looking for