Homepage Time Zone is in EST and not in PST

On the Yahoo Homepage the day, date, and time are in another time zone as to the time zone that I an in PST. It changes to the next day at 9 pm and it is not even midnight yet.
Example: Thursday, February 16, 2012, then at 9 pm it will change to Friday, February 17, 2012, before it hits midnight on Friday, February 16, 2012. Please fix, and hopefully it is not affecting my e-mail....Please fix this issue

Try http://kb.mozillazine.org/Time_and_time_zone_settings

Similar Messages

Different time zones between R/3 and APO

Hi experts,
Can anyone explain me which is the impact in having the R/3 in local time zone ( CDT, for example) and the APO in UTC?
Thanks in advance,
Regards,
Gyo

I believe you are mentioning about the SYSTEM TIME ZONE.
(Use transaction- STZAC to view it.)
Generally it is recommended that you maintain the same system time zone in APO similar to the time zone in R3.
However I remember in one of my implementation projects-4.1 SCM, we just left the SYSTEM TIME ZONE in APO to the default value given by SAP --(CET) whereas in R3 ,it was maintained as GMT.
(1) There were no issues as far as I remember.
(2) However we changed it to UTC/GMT( same time zone as that of R3) in APO after Go-Live with no issues at all
*We had our Basis Team contact SAP and they said that we could do so without any harm*
The reason for our change was that we wanted the BAck Order Processing results to update immediately based on
"1.1 Checking the Time Zone in SAP SCM
Use
This is an optional activity. Depending on your deployment of your SCM and ERP systems, the appropriate time zone should be customized in your system landscape. However, if you want to get the Backorder Processing result updated in the SAP ERP immediately, youd better to set the two systems in the same time zones. You can get more details from the SAP note 443500.
http://help.sap.com/bp_bblibrary/500/documentation/T12_BB_ConfigGuide_EN_ZH.doc"
Also all the objects( Locations, Resources ..etc) should have a timezone maintained- Some of the them are automatically determined from R3 and sometimes you have to maintain.
Regards
Kumar Ayyagari

Can I use Time Capsule as external storage and not for Time Machine?

Can I use Time Capsule as external storage and not for Time Machine?
I want to just use it like a USB drive but wirelessly and so other people in my suite can use it wirelessly to get the files I put on there. Let me know if you need me to explain some more

Will the Time Capsule come with directions on how to set it up as external storage rather then time machine.
Yes, AirPort Utility will walk you through the setup.
Because when I watched the video on it it says that time machine is automatically recognized
You have to turn Time Machine "On" for each Mac separately. By default, it is "Off". Leave it off if you do not want to use Time Machine. If by some chance Time Machine is "On", then turn it "Off"

Yahoo Homepage is in EST and not PST like my seetings are in. It changes to the next day when it is not midnight yet. Please fix. Yahoo say it is a browser issue!

On the Yahoo Homepage the day, date, and time are in EST and I am in PST. The day, month, time, and date, changes to the next day at 9pm and it is not midnight yet.
Example: Monday, February 13, 2012, then at 9pm tonight, it will change to Tuesday, February 14, 2012, before it hits midnight on Tuesday, February 14, 2012. Please fix.
I have been in contact with AT&T and Yahoo for the past month trying to get this fixed so it doesn't affect my e-mail time. Now both are saying it is a browser issue, and that is you guys. I can't believe I am going through all this just to get something fixed....it is amazing! Our e-mail is:[email protected]
Thanks,
Tim

Try http://kb.mozillazine.org/Time_and_time_zone_settings

Time zone difference between SRM and R/3

Dear Experts ,
We are using SRM extended classic scenario and using PR transfer but I got an error which time zone Turkey is not valid.
When I check SRM and R/3 , SRM does not have turkey.
I checked OSS notes but I did not found .
Can anyone help me about the problem.
Regards,
Tuluhan,

Hi,
try the following notes
1569627
198411 may be helpful!
regards,
kiran

Time zone difference between primary and physical standby

Dear Team,
We have Primary database server (with EST Time zone) and physical standby (with PST time zone), in case of switch over/fail over to physical standby
what are the major impacts.
Is it mandatory to be in time sync?
Thanks in advance
Aj

CURRENT_TIMESTAMP
04-FEB-10 10.22.20.444692 AM +05:30
( above is same on primary and standby)
SQL> select systimestamp from dual;
SYSTIMESTAMP
03-FEB-10 08.52.46.934125 PM -08:00
(above is 3hr diff from primary and standby)It is 13hrs difference
One is around Indian subcontinent and other should be in US western region ?
Systimestamp is the timestamp of the OS of the server and hence the difference and the sysdate value will be from systimestamp and if the applications uses SYSDATE then there can be an issue...

TS3920 Time zone issues between iPad and iPhone.

When I add a calendar entry from my iPad it has the correct time zone. But when I go to edit that entry from my iPhone, it has the wrong time zone. My settings have the correct time zone for both devices. What else can I check?

Hello Julie,
I know that Time Zone Support can cause these types of issues. Take a look at teh article below and check the setting on both the iPad and the iPhone.
iOS: How to adjust Time Zone Support for calendars
http://support.apple.com/kb/HT4576
If you continue to have issues, you may want to contact Apple Support using http://www.apple.com/support/contact/.
Hope that helps,
- Griff W.

Time zone problem between mac and windows

i'm running os x snow leopard on one partition and windows 7 on another on a 2008 mbp. whenever i log into windows and then get back onto mac, my time is completely off. i can temporarily fix it by removing the local time file, which resets it, but every time i log into windows and back i get the same problem. i've tried turning off the automatic time zone, tried turning off auto everything and just setting the time myself and it always goes back to being messed up after a trip to the windows partition.
anybody got a fix?

For windows users can you create a connection key in Windows machine and send the same.

I have my Droid Ultra set to automatically detect what time zone I am in and the current time, but the messages that I receive say that they are coming in an hour early, so it doesn't keep a chronological order to them, is there a fix to this issue??

So just like the title says, my phone is getting the received times wrong for incoming messages, this happened after I took a tip over time zones, anyone know a fix to this issue or had this happen to them?

Hello Emcmanigal! I can certainly help you today! Sorry to hear of the issues you're having. Please click here to customize and verify the settings are correct: http://vz.to/1uGDOxt Please verify, then power off phone to reset and keep us posted! Thanks so much!
KristieQ_VZW
Follow us on Twitter @VZW Support

Can i use my time capsule as wireless storage and not as a router too?

hi there i just bought my self a time capsule its a 500gb one as i do not need the 1tb+ storage.
i play a lot of online games and have a fast router so i do not want the time capsule for its router capabilitys i only want to use it as a wireless storage unit is this possible to do?
if not i can connect a usb storage to my current router and use that as my wireless storage if so where is the best place to sell this time capsule?

You simply bridge the TC and plug it into the existing router.. it will then provide network storage..
Can connect either via the existing router or the TC.. if you set up wireless correctly.. if it is a gen1 you can set to 5ghz only.. that will keep it from interferring with the existing router.

Time Capsule flashes amber (slow) and not being picked up by Airport Utility; cannot set up Time Capsule

Airport Time Capsule purchased in Canada, trying to set up in home in Mexico. Connected to isp via ethernet cable, tried resets and power off/on on both TC and isp modem. TC flashes amber (slow), and is not picked up by Airport Utility on Macbook or iPad. Do I have a faulty TC that has to be returned? Wireless signal from provider is strong and reliable for last 5 yrs. Please help

Got it figured :-) Unable to pick up TC via Airport Utility on MacBook Pro or iPad. Used iPad via Settings-WiFi to pick up TC and enter edit functions. Once WAN deselected, Bridge selected, DHCP selected got the steady green light on the TC. Airport utility now picks up the TC no problem on both iPad and Macbook. System now fully operational.

Setting up Time Capsule as "Access Point" and not using router feature

I would like to use my Time Capsule as a wireless access point for a laptop. What settings in Airport Utility do I need to make?
Here's my setup:
Internet -> DSL Modem -> Linksys (wired) router -> Ethernet Switch -> Time Capsule.
Connect Using: Ethernet
Configure IPv4: Manually
IP address: 192.168.1.20
Subnet: 255.255.255.0
Router: 192.168.8.1
Connection Sharing: Off - Bridge Mode

Follow up to my question.
Got my laptop to access the internet via the Time Capsule. How? By having my ethernet switch connected to the WAN port of the Time Capsule - not the LAN port.
Internet ->DSL Modem -> Ethernet Switch -> Time Capsule (WAN port)
I noticed that makes it so computers on my wired LAN can't use 'Airport Utility' to access the Time Capsule. I have to move the ethernet cable from the ethernet switch to a Time Capsule LAN port, in order for my wired LAN computers to see my Time Capsule.
Is there a way, so I don't have to unplug from the Time Capsule WAN - to LAN port?

Why am I having a hard time loading some web pages and not other

My Home page

only in safari ?
tried other browsers?
if only in safari
then the safari forum may have more safari experts who may not read posts here
https://discussions.apple.com/community/mac_os/safari

Time zone used fot GI/MAD time calculation

Hi,
We have been trying to define working shifts/ cutoff for shipping points. While scheduling SAP is using the user time zone to calculate the MAD time, GI time etc. I need it to use a specific time zone that I define and not the time zone of the user processing the document. There is a field for time zone at the point where we allocate the shift definition to the calendar but it is not working. Is there anyway to achieve this ? The strange part is that it is not considering the Planr or shipping point time zone , but the user time zone to do all calculations.
Thanks,
Hari.

Dear Hari,
Usually in SAP logisticss the standard is to take date and time from the
location where the user is located, there is reasons for it for example
imagine the case below:
"A user is working in time zone EST (GMT-5h), the shipping point is in
time zone CET (GMT+1h). At 11 p.m. the user enters today's date,
May the 9th, 2011 as actual goods movement day. The system now
calculates the date using the time zone of the shipping point and
determines 05:00 CET as actual goods movement time. But this time
refers to May, the 10th. After pressing <enter>, the date and time would
again need to be adopted which is confusing for the user.
If the date is kept unchanged, it is also not correct as then the date
is in the past (May, the 9th, 05:00)."
There is not a possibility to of one this system behavior in a way
that suits fine in every situation.
I have researched and found the following information though:
If you enter a time in the dialogue it is independent where the user is.
The systems takes it as time zone of the shipping point as long as the
time zone is maintained there otherwise, the local time zone is taken.
There is no calculation on the user input programmed as a date change
could lead to confusion...
Since the existence of the note 1596670 if you enter a time in the dialogue
it is independent where the user is.
Best Regards,
Christian Rosa

Apex 4.1 bug? Application language derived from Session changes time zone

I have created an application in Apex 4.1 and in the "Initialization PL/SQL Code" for the session (what used to be called the VPD section) I have the following code:
begin
execute immediate 'alter session set time_zone = ''+01:00''';
end;This works as expected, UNLESS the "Application Language Derived From" (under "Edit Globalization Attributes") is set to "Session", in which case the session's time zone is also affected (and not just the language, as one would expect).
This can be seen in the following simple example, which runs the above code to set the time zone, and has the language derived from "Session":
http://apex.oracle.com/pls/apex/f?p=38595
This shows
sessiontimezone = -05:00Even though the session's time_zone has been explicitly set to +01:00 with the ALTER SESSION statement.
Experimentation with the URL shows that if a p_lang parameter is passed, with a valid language identifier, for example:
http://apex.oracle.com/pls/apex/f?p=38595&p_lang=de
then the time zone is affected (showing -05:00 instead of +01:00).
However, if an INVALID time zone identifier is passed:
http://apex.oracle.com/pls/apex/f?p=38595&p_lang=xx
then the session time zone is CORRECT according to the ALTER SESSION command:
sessiontimezone = +01:00If I change the "Application Language Derived From" to something else than "Session" (for example, "Browser" or "Item Preference"), then the timezone is also correct (ie follows the ALTER SESSION command).
Running the page in debug mode confirms that the time zone is being set after my VPD/initialization code has been run:
0.01585     0.00146     ...Application session: 1671806996734123, user=nobody     4
0.01731     0.00144     ...Execute Statement: begin begin execute immediate 'alter session set time_zone = ''+01:00'''; end; end;     4
0.01875     0.00065     Session: Fetch session header information     4
0.01940     0.00073     SESSION Language (nobody): wwv_flow.g_browser_language=en maplang=en     4
0.02013     0.00059     alter session set nls_language="AMERICAN"     4
0.02071     0.00043     alter session set nls_territory="AMERICA"     4
0.02114     0.00094     NLS: CSV charset=WE8MSWIN1252     4
0.02208     0.00111     ...NLS: Set Decimal separator="."     4
0.02318     0.00062     ...NLS: Set NLS Group separator=","     4
0.02380     0.00063     ...NLS: Set g_nls_date_format="DD-MON-RR"     4
0.02443     0.00091     ...NLS: Set g_nls_timestamp_format="DD-MON-RR HH.MI.SSXFF AM"     4
0.02534     0.00066     ...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"     4
0.02600     0.00050     ...Setting session time_zone to -05:00     4
0.02650     0.00065     Setting NLS_DATE_FORMAT to application date format: dd.mm.yyyy     4
0.02715     0.00056     ...NLS: Set g_nls_date_format="dd.mm.yyyy"     4
0.02771     0.00055     ...NLS: Set g_nls_timestamp_format="DD-MON-RR HH.MI.SSXFF AM"     4
0.02827     0.00057     ...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"     4
0.02884     0.00230     NLS: Language=en     4
Conclusion: It seems to me that when the LANGUAGE is set to be derived from the "Session", this also, as a side effect, alters the session TIME ZONE, which must be a bug... ?
- Morten
http://ora-00001.blogspot.com
Edited by: mobra on Sep 24, 2011 7:14 PM

Hi Arie,
When you are setting the language to derived from session you actually declare that you are working in a dynamic environment – per session – and not in a static one. Using the Initialization PL/SQL Code is very static as the same code is executed for every database session.I was using a fixed time zone value in the ALTER SESSION to demonstrate the bug/problem... in real life, the actual time zone is derived dynamically based on a user profile stored in the database.
APEX 4.0 introduced the Automatic Time Zone under the Globalization tab. By default it’s set to No but setting it to Yes will allow you to use your local time zone (as derived from your browser) with whatever language derived setting you choose, including per session with the *&p_lang* parameter.The key point is that LANGUAGE has nothing to do with TIME ZONEs, and vice versa. People speak English (and Spanish, and French, and Chinese for that matter) all over the world. You cannot determine a user's time zone based on the chosen language.
You're telling me to enable "Automatic Time Zone" to work around an unwanted side effect from changing the language setting. Sorry, but that just sounds like bad advice to me.
If you want to use session derived language, however the local time zone settings are not good for you, you can still change them with a Before Header and After Submit PL/SQL processes and an appropriate alter session statement, on a per page base. The APEX engine will not ignore a page based session setting.Why should I have to do this for every page when the "VPD" Section (now called "Initialization PL/SQL Code") is made for this purpose?
If you look at the help text in the Apex builder for that section, it actually says that:
The code entered here need not pertain to VPD/FGAC and may not be related to security at all.
Any code that needs to be executed at the earliest point in a page request can be placed here.
For example, the following code sets the database session time zone for every page request:
BEGIN
   EXECUTE IMMEDIATE 'alter session set time_zone = ''Australia/Sydney'' ';
END;So I hope the demonstrated behavior is not intentional, but a bug, and I'm hoping Joel sees it the same way.
- Morten
http://ora-00001.blogspot.com

Homepage Time Zone is in EST and not in PST

Similar Messages

Maybe you are looking for