Homepage works, but linked pages don't

I have created a webpage using iWeb'09 following the video instructions. The welcome page works, but the links from added pages are not working after I have uploaded it to MobileMe. It works in iWeb. Is there anyone who can tell me what the problem might be and how I can correct it?
Thanks a lot.

Hi thanks for Helling me. It is written in the bottem of my question. Wait to get help, thanks

Similar Messages

DW CS3: test connection works, but local pages won't upload.

My MacBook Pro died, can'taccess files or apps and I don't have the CS3 install disks, so I moved DW over from my Mac Pro.The test connection works, but local pages won't upload.I re-entered all the site info, confirmed I ahd all the correct FTP settings from my sertver tech guys. I even created a new site duplicating all the original info. BTW I have ALWAYS had this problem on the Mac Pro...Never been able to upload from that computer. All the other apps in CS3 work fine.
jackhatfield

FileZilla worked. Thanks so much. Still wish I could figure out why
Dreamweaver won¹t transfer files, it would be easier than editing in DW and
then having to use Filezilla to transfer them. DW never transferred files on
the Mac Pro I had it installed on either (that¹s where I got it from when I
moved apps to my new MacBook Pro).
jack

HP 2140 fax - everything working but printed page is blank

Printing a page seems to be working but nothing prints on the paper. Installed a new black cartridge but still nothing printing on the page. Unplugged the fax and waited 10 seconds to reset it and still does not print. I only use it maybe once or twice a month.
Any help please

Hi @dasteele,
Welcome to the HP Forums!
I noticed that you cannot print wirelessly with your HP Envy 5530 on Windows 8, that was previously working. I am sorry to hear this, but I am happy to help!
Please see the following guides:
'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows 8.
Printer Does Not Maintain Wireless Connection.
I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this information helps, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

My home network *works* but have I done it correctly?

Hi,
Below is my set-up. It works, but I'm worried that I should have done it differently to get maximum performance with my hardware. I'd really appreciate someone glancing over it and letting me know whether it seems okay.
Cable internet connected wired to modem provided by ISP.
Ethernet cable to Airport Extreme (the new one)
Intel iMac Core 2 Duo (N enabled by disc included with Airport Extreme) connecting wirelessly:
-- Radio Mode: 802.11n (802.11b/g compatible)
-- Wireless Security: WPA/WPA2 Personal
Airport Express (just used for Airtunes, and nothing else)
-- Wireless Mode: Join a wireless network
Is the Airport express slowing down my network? I want N speeds (just because I can) and don't need to worry about connecting any other devices (apart from the Airport Express) to the network.
Any suggestions much appreciated.
Steve.

I plan on getting an
iPhone anyway, when they are released in the UK, so I
guess I'm going to have to run a g compatible
network...
Getting an iPhone is of course compulsory Steve
Check out some posts regarding running a hybrid g/n network using a spread of channels...
Might be fun (and not expensive)
Cheerz
PowerMac G5 2.5 - PB 12" 1.5 Mac OS X (10.4.8) SE30, IIsi

Aol mail works, but aol videos don't. also, aol stays on page 1 of day's news stories. arrows don't work.

AOL opens as usual, but I can't move from page 1 of the day's news stories. The arrows don't work and the bar at the top says: aol.com/#. AOL videos go to "connecting." but don't play. My AOL mail account works fine. There are no AOL problems using IE.
Problems started 2 days ago. I'm a low-tech sort, but have tried various fixes suggested in the help section. Currently using Firefox 9.0.1 with Adobe and Silverlight plug-ins. No add-ons. No known (to me) changes 2 days ago that could have caused this. What's the fix? Please advise.

Make sure that you do not block JavaScript
*https://support.mozilla.com/kb/JavaScript
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

I can't print web pages since a recent upgrade to 4.01. The print command works but the page comes out empty. right now a copy the link to IE and print from there. HELP!

When printing from the mozilla 4.01 browser the printer spits out blank pages. It seems like it happened after downloading and running mozilla 4.01 browser.
I have to copy the link to IE (boo!) to print the coupon or page on my printer.
Why?

The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
"Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
You need to remove the checkmark on "Always use private browsing mode" to leave Private Browsing mode or chose the "Remember History" setting.
*https://support.mozilla.org/kb/Private+Browsing

Firefox 3.6.3 hangs after some use. Links w/in home pg. work but dropdown menus don't. must use Cntrl/Alt/Del to get out of pg.

Firefox 3.6.3 hangs up after some use. Can't find any specific site or action that causes this. Links w/in page and menu's such as most visited, latest headlines, and links like utube, google continue to work. Drop down menus (i.e. File, Edit, Tools, Help)/ will not open and I must use Alt+Cntrl+Del to get out of the page.
== This happened ==
Every time Firefox opened
== 1 month

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Form auth problem? action work but link not work??

Hi all,
I try to use form auth to securite my site, but I have problem at
my login page is point to formlogin servlet , I use
getServletContext().getRequestDispatcher
("/secure/search2.html");to sdirect all correct login action to my sequences.html file and have group of action, jump to other page,this step work fine. but the problem my search1 file also on my secure folder , when I click the search1 link it jump to login page. what is wrong ?? is because I have
<url-pattern>/secure/*</url-pattern>in my web xml page? or other problems?
how to deal with it ? by the way I have some duck dollars left , but i can't use it , why??
and how to deal

Julio,
Good point. Exactly why I recommend not to use referenced code. libraries are the only way to go when sharing forms code. Just to many headaches when using referenced code.
Just my 2c.
--pat

Subscription links not working, but links work in iTunes store

Maybe someone can help me with this?
I am trying to get our church's podcast working right in iTunes. The problem I am having is that the links to the audio work fine on the itunes store page, but when I subscribe to the podcast, they stop working.
Here is a link to the podcast in iTunes: http://www.itunes.com/podcast?id=268831023. As you can see, from that page, you can play the audio just fine. But when you subscribe, its almost like the links are getting broken. When you go to the subscription, it still has all of the information about the audio file names and lengths, but it just cant download them or play them. But go back to the iTunes store page and they play fine. So weird. The only thing we have changed is we are using a different location for the feed. But we followed the directions on how to update the old feed and let iTunes know where the location of the new feed is. Which apparently worked, because on the iTunes store page, it is showing our latest audio files from our new feed location. Any ideas of what might be going on?

I am simply leaving instruction on our website on how to find the podcast using Itunes search.
It would be simpler just to post a link to the URL for the iTunes page for your podcast. In that page, justcontrol-click the podcast image and select 'copy URL to clipboard': then you can use that to make a link on your page which will take people straight there.

Entourage Works, But Web Pages Do Not Load

I work at a school that has several MacBook's that were setup with the same disk image. One of them has stopped loading web pages (using both Firefox and Safari), but Entourage can still send and receive email without a problem (POP/SMTP). All other computers on the school network are getting online just fine. When I connected the problem MacBook to a different network the same problem arose. I have tripled checked network settings, rebooted,etc. to no avail. Any ideas on how to fix this will be greatly appreciated.

Which changes did you make to remove MixiDJ?
You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

My ipod work, but my computer don't reconize it???

Hi everyone!
Tanks in advance for helping me, cause im very depressed!
My story is a bit long to explain, but i think i should details to solve the problem! (Sorry for my language, im french!)
All begin a little bit earlier today when i connect my iPod to is deck. I eard a noise that i did'nt ear before. You know when a disk skip, or something like this. And, my computer was not reading it (neither in windows or iTunes)
Then it's was impossible to disconnect my iPod.
When i finally succes to disconnect it (with Safely Remove Hardware) i was not able to turn off my iPod.
then i reset my iPod and saw the little apple. Then, a file with an ! came trought the screen.
I follow all the instruction in this site, and nothing work it out! So, i decided to erase and restore all of my iPod. but again, it was impossible to connect to my computer?!
A message occured that tell me that the formating have failed and my computer turn off by himself!
Then, i take my iPod and check if is work. All was erase...nothing was left. The i uninstall iTunes and iPod program and download the latest from apple site. Again, the computer don't reconize my iPod. When i finally remove my iPod from the computer, all my song were back.???
But, when i see the option, thats tell me that i have 3759 song, a capacity of 37,1 Gb (that was normal)but only 58 mB available. And i still can connect my iPod to my computer!
If somebody can help me before i ship my pod to apple, it will be greatful!
Tanks and sorry for the language!

When you unplug your ear phones, peek in the audio output port and look for a red light. If so, the switch is stuck and these are the options for remedying the problem.
1. Stick the earphone plug in a few times.
2. Blow in it real hard or use compressed air.
3. Jiggle a tooth pick or the like inside the port.
If no success, then it is time for an appointment at a genius bar.
Ciao.

Two-sided printing works, but alternate pages print "upside down"

I have an HP C6280 all-in-one, networked via Bonjour. The 6280 ships with the duplex (two-sided) printing accessory. Latest drivers from HP (v2.3?) installed. I can select two-sided printing, and it works...but no matter which binding option I choose, the pages print out as if I was binding at the top. IE, page 1,3,5 are right side up but 2,4,6 are upside down. I want binding on the left.
What am I missing? On the HP forum, I saw a note that this is a known problem in Vista. Any ideas? thx

This was a problem about a year old with older drivers for other printers. Maybe somehow you've got these installed. Run the HP Uninstaller from its folder in Applications and uninstall all HP software. Reinstall version 9.7.1 from the download here:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-55528-2 &lc=en&dlc=en&cc=us&lang=en&os=219&product=3194498
You could also try reseting the Leopard print system. Search for how to do this.

SQL INSERT / SQL UPDATE don't work with form page, don't affect table

The subject line says it all. No matter what I try, my updates on the form don't appear on the report page, which accesses the table. When I look at the table using SQL WORKSHOP, the changes aren't made there either. What am I missing? I have another report page and form page with a different table in the same application and updates in that table work fine. I coded them both the same. What should I be looking at?
Steve "the n00b" in Raleigh NC

Steve,
How you have created the FORM page? Using FORM WIZARD? Or You have created blank page and after that you have manually created all the form items?
If you have used WIZARD to create form page, then you can see a page process with Automatic Row Processing (DML) type. Here you need can set DML (Insert/Update/Delete) you wish to use on this form. APEX will take care of the rest.
If there is no such process in your page, then you need to create one. You may have one process to do both (Insert and Update) and you can have two sepate processes. I prefer having two seperate page processes (after submit), one for Insert and one for Update.
Now you can make the Insert process conditional so that it only execute when you click button - Create (Add or any similar button you have ) Also make the Update process conditional so that it only execute when you click button - Save (Update or any similar button you have )
Just a quick note - From the above trigger, I can guess you are allowing users to enter Primary Key manually? In my opinion, Primary key should be always system generated using SEQUENCE. Users can only enter BUSINESS KEY (if any) and we should not use Business key as Primary Key.
Good Luck :-)
- Hari
Edited by: Hari_639 on Oct 23, 2009 8:02 PM

Just had ipod, was working but i've done something major to it!!!!! HELP.

I have just received my ipod (4th gen clickwheel) from ebay. I got it out of the box and all was working well. I connected it to the computer, tried updating but pressed restore by mistake. Now I have a folder and exclamation icon. The computer will not recognise it, returning a message of 'firmware update failure, disk write error'. I've tried the '5 r's' but no joy. I have itunes 4 or 4.7 and the update software is 3.0.2, 2004.08.06. Can anyone please help? A very big hopeful thanks in advance. Daz.

Have you looked at the troubleshooting document? You may get somewhere with it: "Firmware update failure" error when updating or restoring iPod

CS4 Graphics accelerator works, but many filters don't work

I'm using CS4 with a Dell XPS 1710 notebook.
In preferences, performance, I set "enable OpenGL Drawing". It listed my graphics card "Nvidia Corporation GEForce 7900 GTX/PCI/SSE2"
I tried the rotation and zooming features and they worked well.
As soon as I tried to apply a filter, such as 'filter gallery' or liquify, no preview image shows in the filter screen. It is just white. The controls work, showing I am zooming in, but no image"
Suggestions?

Hi John
I opened it this morning after a reboot and it seems to be working.
Not sure why.
Now, getting a message "could not import clipboard because of a program error".
Suggestions
thanks

Homepage works, but linked pages don't

Similar Messages

Maybe you are looking for