Homesharing not working even when activated on all my devices

Hi everyone,
I have not tried Homesharing in a long time, but everything I can remind is that it worked perfectly. So, I have not changed my setting, since yesterday I have uploaded itunes 11 and Remotes 3.0 (but it is the same in Music) Homesharing is not working : on my iPhone and iPad I get a message asking to activate the system on my computer using my Apple ID.
Obviously I tried to re-activate it, but it was already in place.
I tried to de-activate it, to re-activated it, same on all my idevices, but no changes.
Does someone have a clue of what's happening to me ?
I'm using OS X 10.8.2, iTunes 11, iOS 6.0.1 on both my iPhone and iPad.
Thank you very much for your help.

Exactly the same problem with the Remote App and Itunes 11 (and looking at this forum it is affecting a lot of people), tried a few different things with no joy. Hopefully someone will find the solution soon.

Similar Messages

My notification tone when set to 'Silent" is not working even when setup on lolipop

my notification tone when set to 'Silent" is not working even when setup .
My notification tone when set to 'Silent" is not working even when setup . It still keeps ringout . This is highly disappointing

Hello, Yes I have tested this with Android Lollipop and found that when the tone is set to silent within the BBM settings I do not receive any audible notification. Testing summary: Access the More menu - Settings - Tone dropdown and set Tone to BBM
- Send a test message and an audible notification occursAccess the More menu - Settings - Tone dropdown and set Tone to Silent
- Sent a test message and no audible notification occurs To allow us to assist further please follow the steps below to create a support ticket and submit logs. Once submitted someone will contact you to troubleshoot the issue.
1) Browse to www.BBM.com/support/blackberry
2) Locate the Need more help section is the bottom right of the page
3) Select Contact us for additional assistance
4) Complete the web form, provide as much detail as possible such as PINS involved and timestamps
5) Select Submit to create the support ticketOnce the ticket has been submitted you will receive an email with your ticket number. This ticket number can then be used to submit logs. To collect logs use the following KB:
KB35080 - "How to submit logs from BBM for Android, iPhone, and Windows Phone" - www.blackberry.com/btsc/kb35080 Thanks,
Daniel

Keyboard not working even when trying to go to BIOS

Hi,
I have IBM Thinkpad R60 9458 A13 laptop having Windows 7 ,today its keyboard is not working but in Windows its function keys like brightness or sound is responding without pressing Fn key.
And no other letter or numeric key is responding.
I tried to boot the laptop and trying to press Thinkvantage button, its not responding.
I then inserted Windows 7 OS DVD and when prompt comes to press any key ..i tried all key but no help.
I then clicked on Compatibility option to have keyboard on screen which is working fine.
Pls advise what would have gone wrong
Regards
Sandeep

Hi Sandeep,
Welcome to Lenovo Community Forums!
I’m sorry to hear that a few keys in the keypad of your Lenovo ThinkPad R60 is not working properly.
Check if the keys are working in different applications. Some keys such as the function keys F1 through F12 will not work with every program. An easy way to test this is to open notepad or other word processing program and trying the key. Try getting into safe mode and see if the keys work. Remove the key from the keyboard and clean it. In some situations dirt, hair, dust, etc. can obstruct keys causing them not to work.
Please try to get into BIOS mode and see if the keyboard is working there. Tap F1 key while system shows the Lenovo logo to get into BIOS.
1. If you are able to use the keyboard in BIOS, it could be a software issue. I would recommend in that case to do a System Restore which will revert the settings in your system to a previous time.
2. If keyboard doesn’t respond in BIOS as well, I strongly suggest you to contact our technical support for assistance.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Best Regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

USB not recognized - even when there's no USB device at all (Windows 7, Pavilion dv7)

Since a few days now I get the message
'The USB-device was not recognized: One of the USB-devices connected to this computer does not work correclty. The device has not been recognized'.
It keeps popping up from my right corner below, every 5 seconds if I don't click it. When I click the message, I get a list of USB devices (ports) there are available. There's one 'Unknown device'. Maybe it has something to do with the finger scan (biometric)? This hasn't been working very good lately..
Even when there's no single USB device installed (normally I have a mouse and a Targus laptop chill mat installed as USB devices), it keeps popping up. I tried deleting the USB port from the list (or uninstall it) in Device control, but it seems it keeps happening.
I suddenly got it, I did nothing specific of did not connect any strange devices (except for a projector on the external monitor exit, but that has nothing to do with USB). I also hear the sound for connecting and disconnecting USB devics randomly when I'm on my laptop.
Anyone has any idea?
Thanks
HP Pavilion dv7 Notebook PC
LE902EA#UUG
Windows 7 64 bit
This question was solved.
View Solution.

The solution can be found here

Adobe Flash does not work, even when enabled.

The Adobe Flash plugin doesn't seem to work. Well, it's there but doesn't show any Flash content. In other words, it just shows the background of the site (or blank). Sites are able to detect Flash if it's disabled. No other addons or plugins are interfering with it. I can't update Firefox or Flash.

Hi,
In summary
* check IE works with Flash content at present
* download and install Firefox 14+
* uninstall Flash 11.3 and install Flash 10.3
* post back with how you get on
* note these are temporary workarounds until developers fix the problems.<br> Whilst these problems exist upgrading FlashPlayer as advised by Adobe Flash, or by Firefox's pluginchecker may not be a good idea.
First of all I note you seem to be using the old Firefox 5. That is no longer supported and is not secure. I would suggest you update to Firefox 14 either by using the menu option
* Help -> About Firefox ->Upgrade
* or by visiting http://www.mozilla.org/en-US/firefox/all.html
Secondly note there may be some problems with use of the current Flash 11.3 versions. Some Firefox users are needing to uninstall tht and downgrade to Flash Player 10.3 (older but secure) or Flash Player 11.2
This problem has had developer attention for a few weeks but there is no sign of a proper solution yet. Note at least some of the problems relate to a new security feature ''protected mode'' used by FlashPlayer on windows systems above Windows XP.
As a Windows user you may wir=sh to check if FlashPlayer works ok on Internet Explorer ? It should do. (But you may have problems if you follow the official advice to use an Adobe uninstaller, you may need to review the IE installation of FlashPlayer afterwards.)
Note the fact that your problem relates to FlashPlayer 11.3 is at the moment no more than a guess, based on the number of known issues at present (and the sytsem information aside that indicates you are using flash 11.3).
The current standard official advice is :
Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox 13 are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
[[Flash Plugin - Keep it up to date and troubleshoot problems]]
[[Flash 11.3 crashes]]
[[Flash 11.3 doesn't load video in Firefox]]
Other, more technical information about these issues can be found under these Links:
http://forums.adobe.com/thread/1018071?tstart=0
http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
--------------------------

Tried to download latest update, system not compatible, now browser does not work even when I tried to download it again. I have bookmarks I'd like back.

I currently have a Mac, version 10.5.8. My Firefox had been running slow so I tried to download the latest version. When it had downloaded, a message popped up saying that this version of Firefox is not compatible with my system. Well, 'no harm no foul' I figured and I tired to go back to my previous browser.
But when I went to click on it, there was a large circle with a line through it. I couldn't open anything. Firefox had effectively been deleted from my computer.
Now it's ok if I can't run Firefox anymore but I had thousands of bookmarks, compiled over years that I would really like back. And I have no idea how to do that.
Any help would be greatly appreciated.

The last version of Firefox available for OSX 10.5 was Firefox 16. Firefox versions 17-20 require OSX 10.6, 10.7 or 10.8 as well as an Intel processor (which you have).
*System requirements Firefox 20 - https://www.mozilla.org/en-US/firefox/20.0/system-requirements/
Running an old version of your OS is dangerous and makes your system vulnerable to attack by hackers. Visit the Apple site to see about upgrading to a newer major version of OSX.
Using an old version of any internet-facing application on the internet makes your system vulnerable. You should always keep your system completely up to date.

HT201274 Facetime is still not working even after restore and all other troubleshooting is performed

Tried restoring and all other troubleshooting and still cannot obtain Facetime on my phone - have others had this problem and if so how di you resolve the problem? Please help.

Which version of Lightroom? Which operating system?

Why do my themes not work even when enabled?

I installed a theme and enabled it. There was a message to restart FF4, so I did, but when it started, it was still the default theme. I changed it back to default, restarted, changed it again to my preferred them, restarted again, and yet it was still default.

I had this & I think the reason was that I had just gotten a blue tooth headset which was turned on but I had taken it off. So I think the sounds were going there.
Yes, after I figured that out, I turned the blue tooth headset off when I took it off. Now when I just checked the sounds, they are sounding on the phone.
I guess the same woud be true if you have any other blue tooth or other device like head set or speaker set up for sounds.

My iphone 4 will not work even when it says connect to itunes and i do and the itunes says get ahold of serivce

iphone 4 isn't letting go past the screen connect to itunes and i do and itunes says problem get ahold of servcie

Then perhaps you should take it in for service...

I`ve updating my iphoneto version 6 but the sound button not working even there is no any sound when i use any application

I`veupdating my iphone to version 6 but the buttons of sound not working even more the soundsof all app was lost

any body have an idea about my problem?

Error Parser does not work, even in SSX3

SunSudio Express (December 2006 release) introduces some interesting new features, but there are still problems. For the first time, I was able to debug Fortran 90 applications in Linux, but debugging is still very limited. Furthermore, the Fortran error parser does not work, even when compiling using Sun's f95 compiler. This is a heavy disadvantage. I assume that Fortran error parsing is not supported on Linux, although the tutorials don't make this point clear: In the Options window, there are settings concerning C/C++ (and its parser), but there are no similar options for the Fortran parser, even in "Advanced Setings" (which are similar to the old Options window). My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.
I don't think that I'm doing something wrong, but I want to ask, just to be sure: has someone had seen the Fortran error parser working on Linux? What about Fortran word completion?

SunSudio Express (December 2006 release) introduces some
interesting new features, but there are still problems. For the first time,
I was able to debug Fortran 90 applications in Linux, but debugging is
still very limited. This is good to know that you were able to debug a f90 application
on Linux. What problems do you see? Please, report them, and we
will file them as bugs or RFEs (requests for enhancements).
Furthermore, the Fortran error parser does not work, even when
compiling using Sun's f95 compiler. Yes, you are right, this feature does not work yet.
This is a heavy disadvantage. I assume that Fortran error parsing
is not supported on Linux, although the tutorials don't make this
point clear: Yes, it does not work yet on all platforms.
In the Options window, there are settings concerning C/C++ (and
its parser), but there are no similar options for the Fortran parser,
even in "Advanced Settings" (which are similar to the old Options
window). There will be similar options for Fortran.
My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.JDK 1.5.0.09 is ok.
We do not target Debian system, but we assume everything
should work there (we test on Red Hat and SUSE).
Good to know that our assumption is correct :-)
I don't think that I'm doing something wrong, but I want to ask, just
to be sure: has someone had seen the Fortran error parser working
on Linux? No. It does not work on Linux, and it does not work on other platforms.
What about Fortran word completion? No, this feature is not implemented yet.
Thanks you for trying Sun Studio 12 Express release and for your report.
Nik

How come my iMessages aren't sending anymore I have a iPod touch 5th gen. It was working and then like 5 minutes later it would not send any messages it always said not delivered even when I press retry and it doesn't send at all I even updated my iOS.

How come my iMessages aren't sending anymore I have a iPod touch 5th gen. It was working and then like 5 minutes later it would not send any messages it always said not delivered even when I press retry and it doesn't send at all I even updated my iOS to iOS 7.04 to see if it will send my iMessages but it won't. I tried to send a message to anyone but it won't work even when before I would be able to send messages but something weird happened that made my messages not delivered. Is there any way I change fix it?

iOS: Troubleshooting Messages

Safari is not working on the Mac. Internet is fine, mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar.

Safari is not working on the Mac. Internet is fine. mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar only and coloured wheel appears.

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If extensions aren't causing the problem, see below.
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file bu

Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file but not working. What is the matter and how can I deal with it?

I am trying it on Adobe Acrobat Reader 9.2.1. Tried to fix Hex code, and also tried 'edit-preference-trust manager'. I focusing on Adobe registries but still couldn't fix the problem.

Homesharing not working even when activated on all my devices

Similar Messages

Maybe you are looking for