Homesharing, using two different id's at this moment.

Hi all,
We would like to use homesharing but we are using two itune id's at this moment.
What will happen with our downloaded music, apps if one of us start using the same id to make homesharring possible?
we would like to share information from our iphones and ipads....
Margo

I'm stuck with the same issue. The two IDs can coexist with one minor issue. When you update apps using the Mac and iTunes and/or the App Store is logged in to the "wrong" ID, it's necessary to log out and log in again. The IOS devices (I have an iPad and an iPod Touch) handle it automatically. You do need to enter the password but that would be necessary even if only one ID was involved.

Similar Messages

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini?
On my PC I simply have a master return email address and use a POP for the secondary address. Both are through the one exchange account without a problem. I need to be able to do the same on my Ipad.

Ah, I should have made that clear. My domain didn't come from google. It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail. I actually have a bunch of domains (with websites).
Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such). Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender. I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it.

Use two different printer services in one web template?

Hi!
Is it possible to use two different help services for printing in the same web template (for the same table item)?
Print1:
<param name="HELP_SERVICE" value="HELP_SERVICE_PRINT"/>
<param name="HELP_SERVICE_CLASS" value="ZCL_RSR_XLS_HELP_WINDOW_PRINT"/>
Print 2:
<param name="HELP_SERVICE" value="ZPRINTING"/>
<param name="HELP_SERVICE_CLASS" value="ZBW_PRINT_HELP_SERVICE"/>
I was thinking that you maybe could change the param name values for the "Help_service" and the "help_service_class" at runtime using the properties for the table item, so that you could choose which one to use, but I havne't been able to do that so far.
Does anyone have an idea?

This is not a problem. Just put the print service for the print to excel on an object other than the table web item. As long as these print services exist on any web item, you should be able to invoke them. I've tested this with putting the "Print with Excel" service on the Navigation Block Web Item and the other print service on the table web item. Hope that helps!
Prakash

How to use two different network cards on RT?

Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
Thanks for your help!
Solved!
Go to Solution.

Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
Thanks

How to use two different versions of Firefox at the same time on Snow Leopard?

I recently upgraded to Firefox 4.0 on my 27" iMac running Snow Leopard 10.6.7.
Previously, I was using Google's "Page Speed" along with Firebug in Firefox 3.6.15 to optimize images in my web pages, and to find other areas to optimize.
Page Speed is not yet compatible with Firefox 4.0. I wrote to Google about this some time ago -- no answer yet.
If I run Firefox 3.6.15 in order to use Page Speed, I run into a few problems afterward when I start using Firefox 4.0 again, since they both use the same "Firefox" folder in my "Application Support" folder.
How can I set it up so that I can have two separate "Firefox" folders in my "Application Support" folder?
Or is there an easier way to use two different versions of Firefox simultaneously, even if one has extensions and/or plug-ins installed which are not compatible with the other version?
Thanks for a great browser!

Please disregard my question. I just conducted more web search and learned how to use Firefox's profile manager in order to make a separate profile for Firefox 3.6.15.
You can find instructions on this page:
http://support.mozilla.com/en-US/kb/Managing%20profiles#os=mac&browser=fx35
'''A small tip:'''
If your Firefox app is named anything other than "Firefox" -- say for example "Firefox 3.6.15" -- when you follow the instructions at the above link, make sure you escape the blank space that is before the version number by adding a backward slash before it, when you type the command string in the Terminal. In other words, in that string, you should use this:
Firefox\ 3.6.15
I hope that helps someone.
WW

SBO - How to use two different Stock Account within the same Item Group

Hi,
I'm currently stuck within one of my implementation.
I'm deploying the same solution worldwide which worked pretty well until now. All the items are connected to an item group, with a unique GL account, supposed to book at the same time the good receipt and the good issue (Balance-Sheet Account = 14xxxxx).
My new unit is willing to use two different GL accounts when performing its stock entry (let say 14xxx10) and another GL account for the good issue, let say 14xxx20.
Do you have any clue so i can please them and keep using at the same time the item group ?
Thanking you in advance
Stephane

Hi,
In fact, we use the GL account as the HQ Account (Reporting Account) while the "Export Code" will be used to store the local GL Account (greek account).
As such, we can, somehow handle two different chart of accounts.
In my reporting, i'm only using a single GL account for stock movements, while my greek counterparts want to handle two different accounts.
Threfore, i have only two solution since there is normally a one to one relationship between a HQ account and a local account that are :
1 - Duplicate the HQ accounts
In that case, i do respect anytime the one to one relationship. I've got one HQ account for one local account. But how can i put this since i can only handle one single stock account.
2 - I keep my single stock account like this but i won't be managing the possibility to get two different Export Codes.
Regards
Stephane

Can you use two different apple ID's on one Ipad?

I would like to use two different apple id's on one IPAD. One apple ID is for work and the other is for personal use.

Read this.
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
 Cheers, Tom

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

How can I use two different ToolTipUIs?

Hi,
I want to use two different ToolTipUIs depending (in my case) on the JRadioButton that the Cursor is hovering over. For some JRadioButtons, I want to use the default ToolTipUI, and for others I wish to display a large amount of text over multiple lines. It seems to me that this is not easily possible as ToolTipManager uses the same JTooltip for each component, so setting the UI for JToolTip will affect every tool-tip-text.
Does anyone know of a simple method to achieve this goal? Or can someone please correct me if my understanding is wrong?!
And yes, I do realise that I could just use the multi-line ToolTipUI for all tooltips.
Thanks,
Muel.

As a point of interest, does anyone know why JToolTip doesn't have a public setUI(ComponentUI) method? Most other JComponents have such a method. This is really annoying because it means you have to do 1 of 2 things:
1. Subclass JToolTip and subclass the particular JComponent
public class WrappableToolTip extends JToolTip {
     public void setUI(ComponentUI ui) {
          super.setUI(ui);
} //end class
// and the subclass of the JComponent
public class WrapToolTipRadioButton extends JRadioButton {
     public WrapToolTipRadioButton(String text) {
          super(text);
     public JToolTip createToolTip() {
          JToolTip toolTip = new WrappableToolTip();
          toolTip.setComponent(this);
          toolTip.setUI(new WrappableToolTipUI());
          return toolTip;
} //end class
2. Rank work around in particular JComponent
public class WrapToolTipRadioButton extends JRadioButton {
     public WrapToolTipRadioButton(String text) {
          super(text);
     public JToolTip createToolTip() {
          JToolTip toolTip = super.createToolTip();
          ComponentUI oldUI = UIManager.getUI(toolTip);
          UIManager.put("ToolTipUI", WrappableToolTipUI.class.getName());
          toolTip.updateUI();
          UIManager.put("ToolTipUI", oldUI.getClass().getName());
          return toolTip;
} //end classThis problem is really annoying, because I have to write 2 or 3 (depending on above methods) classes for something simple. If it were a different component, I'd just have to write 1 class - the UI class. Irritating!

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

How do I use two different apple IDs on one itunes?

How do I use two different apple IDs on one itunes?

This would be a violation of the terms of use of the itunes store and could result in the loss of your account.
You cannot use the U.K. itunes store unless you are in the U.K

Can I use two different database with DBSystemLoginModule?

Finally I can login with Database user id by DBSystemLoginModule on Embedded oc4j server.
But I confused between [b]jazn-data.xml and system-jazn-data.xml.
Which xml do I have to edit for jdbcUrl and jdbcDriver?
Now I would like to use two different database(such as only sid is different).
In this case I want to show specific database name as realm name.
What should I do?
When I use DBSystemLoginModule, I edit JdbcUrl in system-jazn-data.xml.
So can I pass the parameter for sid programmatically?
And also I tried to run my application with other database with DBSystemLoginModule on Embedded oc4j server.
I changed few things(jdbcUrl at system-jazn-data.xml,jazn-data.xml in embedded-oc4j-server/config and database connection for BusinessComponents at Project Properties of Model/ViewController.
But I got some error.
Did I miss something?
----< my error messgae >------
500 Internal Server Error
JBO-30003: The application pool (customer.model.datamodel.CMAppModuleLocal) failed to checkout an application module due to the following exception:oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=null at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002) Message was edited by:
Message was edited by:
sdcsdc

I think I understand now, you are modifing the custom login modules configuration within the system-jazn-data.xml file. This is a bit dangerous! Didn't you register the login module in your orion-application.xml? For example, this is the way I do it:
<web-module id="customProv-web" path="customProv-web.war" />
<persistence path="persistence" />

<security-role-mapping name="sr_developer">
<group name="developers" />
</security-role-mapping>
<security-role-mapping name="sr_manager">
<group name="managers" />
</security-role-mapping>
<jazn provider="XML">
<property name="custom.loginmodule.provider" value="true"/>
<property name="role.mapping.dynamic" value="true"/>
<property name="role.compare.ignorecase" value="true"/>
</jazn>

<jazn-loginconfig>
<application>
<name>customProv</name>
<login-modules>
<login-module>
<class>oracle.security.jazn.login.module.db.DBTableOraDataSourceLoginModule</class>
<control-flag>required</control-flag>
<options>
<option>
<name>data_source_name</name>
<value>jdbc/OracleDS2</value>
</option>
<option>
<name>roles_fk_column</name>
<value>userName</value>
</option>
<option>
<name>table</name>
<value>userinfo</value>
</option>
<option>
<name>groupMembershipTableName</name>
<value>groupinfo</value>
</option>
<option>
<name>groupMembershipGroupFieldName</name>
<value>role</value>
</option>
<option>
<name>usernameField</name>
<value>userName</value>
</option>
<option>
<name>user_pk_column</name>
<value>username</value>
</option>
<option>
<name>passwordField</name>
<value>passWord</value>
</option>
</options>
</login-module>
</login-modules>
</application>
</jazn-loginconfig>
<log>
<file path="application.log" />
</log>
<namespace-access>
<read-access>
<namespace-resource root="">
<security-role-mapping name="<jndi-user-role>">
<group name="administrators" />
</security-role-mapping>
</namespace-resource>
</read-access>
<write-access>
<namespace-resource root="">
<security-role-mapping name="<jndi-user-role>">
<group name="administrators" />
</security-role-mapping>
</namespace-resource>
</write-access>
</namespace-access>
</orion-application>

SLI - Can I use two different video card versions for SLI?

Hello,
Can I use two different generations of MSI video cards that implement the same GPU for SLI?
The two video cards are:
MSI N260GTX-T2D896-OCv2 GeForce GTX 260 896MB <-- What I currently have
MSI N260GTX-T2D896-OCv3 GeForce GTX 260 896MB
MSI N260GTX-T2D896-OCv4 GeForce GTX 260 896MB
The main difference between these three seems to be that the OCv3 has two fans and a different heatsink than the OCv2. The OCv4 has one fan like the OCv2 and but it is located in a different location and some weird spikey heatsink thing going on. I already have the OCv2 but I am looking to get another card for SLI and newegg doesn't sell the OCv2 anymore. The important thing is that I am looking for is stability and it seems that the most ideal setup would be to get identical cards.
By the way, why are there so many versions (updates?) to this card? Have there been issues related to the card that necessitate a revision?
Thanks

Different coolers(HS and fans) and possibly different makers of vRAM. But, you should be able to run SLI without issues regardless of the versions.

Can I use two different HD's to backup my Mac?

I was thinking how to make my backups more resilient. At the moment I take one weekly backup from my Mac using Time Machine - I then store the TM hard-disk away somewhere safe. (BTW - the reason I don't leave the TM disk connected all the time and run continuous backups is that I figure if someone breaks into my house, they'll just take the Mac and the hard disk!).
I'm now thinking what happens if the TM hard disk fails and I can't restore from it? So I thought about maybe getting a second external hard disk, and alernating my backups each week to a different disk. As well as providing extra protection against a failure, I could also store the two backup disks in different places to add further resilience.
Would TIme Machine get confused however if I use two different disks to run backups from the same Mac?
Thanks for any advice...

Time Machine won't get confused if you use it to back up to alternating disks. You have to run a complete, full initial backup on each machine, of course. When you swap disks, use the Time Machine pref pane to "choose" the backup disk that's currently connected.
The "Preparing Backup" stage takes longer on the first backup after the swap - but it would do that if you had just not used the same drive for a week, too.
Of course, YOU might get confused with this setup if you're looking for an older version of an existing file and the specific one you want is on the "other" drive, but it sounds like you're just looking for a "restore in case of disaster" solution rather than using the versioning history Time Machine provides.
(Also - if the drive isn't big - physical dimensions, I mean - it might be easier to unplug it and shove it in a drawer if you think your Mac might be grabbed but the rest of the place not get ransacked.)

Report that uses two different queries

I need to make a Report that uses two different queries. It would do one query, then the second, putting the results one after the other on the page.
Using the wizard, I put in the first query, and it will generate output from this first query.
I am able to put the second query in the Report, but when I try to use something from the second query, it gives a message about accessing a field below its frequency.
In the Reports forum, there is a reference to
tons of samples available in
builing reports doc 1. http://download.oracle.com/otn/other/general/B10310_01.pdf
But the link is broken.
What can you tell me?
Thanks, Wayne

What you're trying to accomplish is possible. Now that you've got the second query, add a new repeating frame in the layout editor below the first area. Open the property palette for the new repeating frame and set the source to the second query. Then add fields from the second query.
Also, remove the fields you have for the second query from the first frame that was created by the wizard; that's what's causing the error about accessing a field below its frequency.

Homesharing, using two different id's at this moment.

Similar Messages

Maybe you are looking for