Homesharing with a difference

I use homesharing alot on my apple tv's and ipad, but i was wondering if apple was ever going to extend this so i could watch any of my films stored in my itunes on my computer over the internet on a wifi connection? This would make full use of my ipad and would be great when going away on holiday.

Have you read what Apple has released so far about iCloud?
IMHO it sounds like iCloud will be doing at least some of what you are suggesting here.
Allan

Similar Messages

  • Hello, we have both Creative Cloud and Creative Cloud for teams. Can you help me with the difference and if i need to have both?

    Hello, we have both Creative Cloud membership and Creative Cloud for team. Can you help me with the difference and if i need to have both? We have 9 employees that are using it. Just not sure if i'm paying for something i don't need.
    Thank you

    Please refer to Creative Cloud Help | Creative Cloud / Common Questions
    CC is for retail use with 20 GB of storage space, CCT is where number of seats are purchased & assigned by one program admin where each seat gets 100GB of storage space.
    You can not have both the CC & team in one account as it will only provide you added storage space of 120 GB but you can activate the CC any of them or either of them twice as CC is based on Adobe ID.
    Regards
    Rajshree

  • Homesharing with apple tv

    while homesharing with my apple tv will i be using up my internet data?

    It should not take up Internet data using most carriers, as the Internet data only counts towards uploading and downloading data.  If you would like me to, I can do some more research, but this is just a general basis. 
    Let me know if you have another question,
    Cheers,
    Allen

  • MR8M with e difference in EUR

    Morning
    The step are
    1) PO in USD   - Date 28.02.2011 (15.37) - Exchange rate :  0,72945 - Amount : 7533,57 USD (5495,35 EUR)
    2) MIRO in USD  - Date 28.02.2011 (15:38) - Exchange rate :  0,72945 - Amount : 7533,57 USD (5495,35 EUR)
    3) MR8M from step 2 (USD) 10012010 - same day, same hour  ==> it generate another item with a difference in EUR in another account  like this :
    Amount : 7533,57 USD (5471,58 EUR)
                                                22,77 EUR
    Can somebody explain me why?
    Thanks a lot.

    its's means "Differences course currency s / reception"
    MIRO
       PK = 31 / supplier account/ 7533,57 USD/ 5495,35 EUR
       PK = 86 / 406186              / 7533,57 USD/ 5495,35 EUR
    MR8M
       PK = 21 / supplier account/ 7533,57 USD/ 5495,35 EUR
       PK = 96 / 406186               / 7533,57 USD/ 5471,58 EUR
       PK = 50 / 607106               /            0 USD/     23,77 EUR
    406186 : No invoice received suspense account
    607106 : Differences course currency s / reception
    I thinks it's clear now.
    Can you help me?

  • Automatic Clearing with Small Difference

    Hi all,
    I want to one GL Account to Automatic Clearing (f.13) with Small Difference consider with another GL account.
    Manual Clearing Working is fine.
    Regards,
    Spradip
    Edited by: spradip on Dec 20, 2011 1:24 PM

    you will have to setup the open item clearing config
    GL based tolerances
    tolerance grp
    assigning tolerance grp to users
    have a clearing GL to clear the difference amount.
    If these are setup correctly, the clearing is possible.
    once this config is setup, try manual clearing once and then use the same GL as part of F.13.
    if you have problems and If you are an ABAP savvy, try debugging and catch hold of what is it looking for....usually the above setting should help you clear.

  • Date BETWEEN query with a difference?

    Hi,
    I have a BETWEEN query (at least I think that's what it will need), but with a difference.
    Normally you would specific a field which was BETWEEN two set variables
    ie. {fieldname} BETWEEN 1 AND 3
    However I need mine the other way round.
    I have a series of records which have a startdate and enddate held against them.
    When a user submits a new record to the db, I need it to check that the starting and ending date range doesn't overlap any of the existing start-end date ranges that exist.
    In order to do that I'm trying to build a query which takes in the incoming startdate variable and see if that is within any of the existing start-date-enddate dates ranges of the existing records, and then same for the incoming endate. I actually want the ones that are going to cause a problem to appear...
    I;m sure there is a pretty easy way of coding this, but I'm struggling to get my head round it.
     Anyone offer any advice?

    You can try something like this
    use adventureworks
    go
    select birthdate from humanresources.employeetest where birthdate between
    (select min(birthdate) from humanresources.employee) and
    (select max(birthdate) from humanresources.employee)

  • How to solve the problem with time difference?

    Hi,
    I work in India with time difference about 12 hours faster than American time.
    I put a validation in my application as follows:
    IF :P2_FINISH_DATE > SYSDATE THEN
    return false;
    else
    return true;
    end if;
    Today (13-Mar-09) at 9:30 am according to my system, I entered 13-Mar-09 as FINISH_DATE.
    But it returned false with an error message: "Finish date cannot be greater than system date."
    I changed my system time as 13-Mar-09, 9:30 pm. Then it accepted 13-Mar-09 as FINISH_DATE.
    How can I solve this issue.
    Would appreciate your help.
    Thanks,
    Guy

    Hi Arie,
    Thanks for the code.
    Your code works perfect in SQL Commands.
    But I don't know how to use the code in my application.
    Would appreciate if you can help me know the followings:
    - How to define two application processes -- before header and after submit (before any processing) – with the proper alter session statement.
    - How to use the APEX VPD field to do the same.
    FYI, I use the following codes:
    - For file upload
    If (:p2_SUBMIT_FILE is not null) then
    insert into PM_DOCUMENT (id, name, blob_content, mime_type, PROJECT_NAME, SUBMIT_TIME, SUBMITTED_BY)
    select id, :p2_SUBMIT_FILE, blob_content, mime_type, :P2_NAME, SYSDATE , :P2_UPDATED_BY
    from apex_application_files
    where NAME = :p2_SUBMIT_FILE;
    Delete from apex_application_files where name = :p2_SUBMIT_FILE;
    end if;
    - For Data entry validation
    IF :P2_START_DATE > :P2_FINISH_DATE
    OR :P2_START_DATE > :P2_TARGET_DATE
    OR :P2_FINISH_DATE > SYSDATE THEN
    return false;
    else
    return true;
    end if;
    Thanks,
    Guy

  • How do I import music using homeshare with iTunes 11...I can see the shared libraries but I can't drag and drop and there is no import button.  Thanks!

    How do I import music using homeshare with iTunes 11...I can see the shared libraries but I can't drag and drop and there is no import button.  Thanks!

    Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
    If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
    Then, drag the address panel up to wherever you want it.
    You may also want to add it to the New Message window in the same way.

  • Can you homeshare with 4th generation ipod

    Can i use my 4th generation ipod to homeshare with a computer?  how......

    Hello mjzbwhalen,
    As long as you are running iOS 4.3 or later on your iPod touch (4th generation), you would be able to setup Home Sharing on your iPod. 
    The following article provides steps for setting up Home Sharing in iTunes, setting it up on your iPod, and how to play music using Home Sharing:
    iOS: Setting up Home Sharing on your device
    http://support.apple.com/kb/ht4557
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • MRKO with price difference

    Hi,
    We will use SAP consignment solution for vendor consignment, SAP using MRKO to sette the consignment stock, which not allow to change posting date and price difference.
    Do you have experience for MRKOfor:
    1. Change posting date
    2. Change price
    What developemnt need to be made?
    Thanks

    Hello!
            For Material Movement with price difference, i find that most of the transactions posted in reply to this thread do not allow us to enter the amount externally.
            You can use movement type 521 for posting a movement with price difference, by first issuing the material to the cost center and then receiving it by T. Code MIGO ->Goods Reciept -> Others and movement type 521.
            If you find this helpful, please reward me with points!
    Regards
    Kaashif M

  • How to use 2 Iphones with 2 difference IDs in one computer

    I and my girlfriend have 2 difference apple IDs. I am going to buy iphone 5s and will transfer my old iphone 5 to my girlfriend. She and I have difference music, difference app. What can i do to use 2 apple IDs for 2 iPhone in one computer without sharing anything (music, app, photo, etc.). Last time she connect her iphone 4s to my computer, her app were transfered to my library. I don't want it to happen again.

    http://support.apple.com/kb/TS1323
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
    The iphone is designed to be synced with a computer. It is not a stand alone device. If the only place the contacts are is the iphone, then this (in my opinion) is a major mistake and not the way the iphone was designed.

  • Homesharing with family members with different iTunes accounts

    I recently got a new MacBook Air as a graduation gift.  Before, I shared a PC Laptop with my brother.  He has his own iTunes account but we both used the same iTunes program.  Some of the songs on the old computer were mine, some were his.  He's also made a few purchases for me on his account.  Anyways, now that I'm trying to get my library onto my new computer, I set up homesharing and tried to get the old music (some mine, some his, some burned by CD's, etc.)  All the music I had purchased on my account switched, but when I tried to import the other songs and movies that my brother bought, it said that my new computer wasn't authorized.  Is it not possible to have someone else's music from a different account on my computer?  I thought that was the purpose of homesharing.  Does homesharing only work if it's the same account on several different computers?  (PS I am all up to date with my iTunes and my software - I just got the laptop 3 days ago, so everything is brand new and current.  I'm pretty sure the iTunes on the other PC computer is up-to-date, but I'm not positive and don't know how to check)
    Has this happened to anyone else?  Was there any solution that you found?  Thank you!

    I-tunes Home Sharing (HS) question:  
    Will they each authorized unit (i pad, computer,iPhone) individually update separately or collectively on a Home Share I-tunes account?
    or differently stated
    How does this work when i pad #2  (a new (HS) unit who likes Country Western)
    and i-phone 3 (a new (HS) unit who liked Jazz and can't stand country western) but both like Mile Sirius connect to (HS) i tune account.
    So when they individually connect with i-tunes from the "Dad's original i-tune account
    Will it be updated  as "Dad's original i-tune account
    or as i-pad 2
    Will it have access but not updating content from Old Dads or from Jazzy i-phone 3
    Quite a conundrum.

  • Homesharing with iP4 and iPad sorting?

    Homesharing from my Mac to the iPhone4 and iPad is a great thing I long was waiting for it. It works so far with my rather big library - but strangely enough the movies and music etc. is sorted in a very strange way: it starts with letters S-T followed by the normal order of ABC. Seems to be a bug in iOS 4.3 or itunes 10.2.1. Anyone else has this problem? Any help or advice?

    Hi. The sort order is supposed to be A-Z, followed by 0-9 and other symbols. Also any leading article, ("A", "An" or "The" in English) is normally ignored for sorting. I recall a time where my iPod "forgot" these rules and used a plain ASCII sort. I assume there is some sort of configuration file on the iPod that encodes both the general and localized article rules which has become corrupt in your case. Try restoring the device. If that doesn't work, reinstall/repair iTunes and then try restoring the device again.
    tt2

  • Homesharing with iTunes 11.2.2

    Homesharing does not work anymore with iTunes 11.2.2 - does anybody have a solution to the problem?
    I have all suggested solutions that I could find online, but nothing seems to work.

    Hello there, Anne-Lill.
    The following Knowledge Base article offers some great, in-depth steps for troubleshooting issues with Home Sharing:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/ts2972
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Asset Balances not tally to GL Balances with small difference .1 paisa

    Hi Guru,
    Asset balance report- s_alr_87011964 not tally to GL balance- FBL3N with a small difference .1 paisa,Please sombody can help me solve this issue.
    Advance thanks.
    Thanks,
    ND

    Hi,
    You need to pass some manual entries through OASV.
    Values appear in asset reports are coming from AS91.
    Entries passed through OASV are update in gl accounts.
    Before passing the entries please check the values.
    Hope this will clear.
    Regards,
    Sankar

Maybe you are looking for

  • How do I back up my restored iPhone to iTunes, without it reloading old content?

    How do I back up my restored iPhone to iTunes, while setting it up as new, without having it reload all my old apps? I tried once, setting it up as a new iphone, and it reloaded all my old apps anyway. I then restored the phone AGAIN, and haven't plu

  • How can I create a search plugin for multiple fields

    There are a number of sites that have search capabilities but they require entries into multiple fields. One such site is for instance the IBM Employee directory. (http://www.ibm.com/contact/employees/servlets/lookup) On this site - in order to get u

  • Targeting Dynamically Attached MC's (2-3 Levels Deep) From Root????

    I am in the process of building an application where all of the functions will be eventually exported into seperate AS files. I am having issues with a Sub Navigation that is attached and managed dynamically. The Sub Navigation is in an MC which cont

  • How to export images with transparent background in illustrator

    H i I am trying  to export a png, jpeg button design with curved designs. But the white background keeps appearing when exported. How do I remove the white background and just have the button image. Thank you.

  • Texts in iPod

    What is restrictions of text-files size in iPod? I've put some texts in Notes folder on my iPod, but them was cut. Is it a feature or is it my mistake?