Homogeneous Copy Error

Hi Gurus,
While doing Homogeneous Copy after database restore below error coming, advise me here to come out the issue...
User table belonging to the dbo schema were found in the database DEV
you can only install an SAP system in a database(MCOD), or you instale a JAVA add in, you might have to convert the existing sytem to its own schema, or contact your SAP support.....
Thanks in advance.
Best Regards,
Rk

Hello  Rk d,,
Could you please share the solution with us,I am having the same problem and i am strucked in the middle ..Please suggest me with your experience
Regards
Vijay

Similar Messages

  • Homogeneous copy error Import Error

    Hi guys,
    I am making astyle='mso-spacerun:yes'>  homogeneous class=SpellE>copy for a NetWeaver
    7.0 SR2 (update hardware),style='mso-spacerun:yes'>  the class=SpellE>source system is
    OS400 V5R4, SAP ID=BWP, and the target class=SpellE>system is V6R1, SAP ID=PBI (class=SpellE>choose a  class=SpellE>different ID).The target class=SpellE>system in the past
    was the ERP PRD, class=SpellE>but it was
    uninstalled.
    The installation
    process (copy class=SpellE>process), in the target class=SpellE>system, stops in class=SpellE>the step 8 of 29 IMPORT ABAP, class=SpellE>the error is:
    ERROR 2009-06-06 09:48:58
    CJS-30023  class=SpellE>Process call 'class=SpellE>usrsapPBISYSclass=SpellE>exerunR3load -class=SpellE>dbcodepage 4102 -i test_MIGKEY.cmd -l test_MIGKEY.log -K' class=SpellE>exits with error class=SpellE>code 2. For details
    see log file(s)
    test_MIGKEY.log.
    The test_MIGKEY.log class=SpellE>is:
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: START OF LOG:
    20090606083155
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: class=SpellE>sccsid @(#) $Id: //class=SpellE>bas/700_REL/src/R3ld/R3load/R3ldmain.c#14
    $ SAP
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: class=SpellE>version
    R7.00/V1.4
    Compiled Feb
    23 2008 04:10:29
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load -class=SpellE>dbcodepage 4102 -i test_MIGKEY.cmd -l test_MIGKEY.log -K
    DbSl Trace: SQL-Error -204 in class=SpellE>function db_open
    DbSl Trace: SQL-Error -204 in class=SpellE>function db_open
    (DB) INFO: connected class=SpellE>to DB
    (TFH) ERROR: Unable class=SpellE>to open N: mpEXPHMABAPDATASAPAPPL1_1_1.TOC
    (TFH) ERROR: OS error message: No class=SpellE>such file or
    directory
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: class=SpellE>job finished with
    1 error(s)
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: END OF LOG:
    20090606083155
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: START OF LOG:
    20090606083450
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: class=SpellE>sccsid @(#) $Id: //class=SpellE>bas/700_REL/src/R3ld/R3load/R3ldmain.c#14
    $ SAP
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: class=SpellE>version
    R7.00/V1.4
    Compiled Feb
    23 2008 04:10:29
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load -class=SpellE>dbcodepage 4102 -i test_MIGKEY.cmd -l test_MIGKEY.log -K
    DbSl Trace: SQL-Error -204 in class=SpellE>function db_open
    DbSl Trace: SQL-Error -204 in class=SpellE>function db_open
    (DB) INFO: connected class=SpellE>to DB
    (TFH) ERROR: Unable class=SpellE>to open N: mpEXPHMABAPDATASAPAPPL1_1_1.TOC
    (TFH) ERROR: OS error message: No class=SpellE>such file or
    directory
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: class=SpellE>job finished with
    1 error(s)
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: END OF LOG:
    20090606083451
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: START OF LOG:
    20090606083456
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: class=SpellE>sccsid @(#) $Id: //class=SpellE>bas/700_REL/src/R3ld/R3load/R3ldmain.c#14
    $ SAP
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: class=SpellE>version
    R7.00/V1.4
    Compiled Feb
    23 2008 04:10:29
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load -class=SpellE>dbcodepage 4102 -i test_MIGKEY.cmd -l test_MIGKEY.log -K
    DbSl Trace: SQL-Error -204 in class=SpellE>function db_open
    DbSl Trace: SQL-Error -204 in class=SpellE>function db_open
    (DB) INFO: connected class=SpellE>to DB
    (TFH) ERROR: Unable class=SpellE>to open N: mpEXPHMABAPDATASAPAPPL1_1_1.TOC
    (TFH) ERROR: OS error message: No class=SpellE>such file or
    directory
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: class=SpellE>job finished with
    1 error(s)
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: END OF LOG:
    20090606083456
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: START OF LOG:
    20090606083608
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: class=SpellE>sccsid @(#) $Id: //class=SpellE>bas/700_REL/src/R3ld/R3load/R3ldmain.c#14
    $ SAP
    /usr/sap/PBI/SYS/class=SpellE>exe/run/R3load: class=SpellE>version
    R7.00/V1.4

    Hi Alberto,
    I still think access to this file is not as it should be.
    Can you open it from the windows host ?
    Should it not be: /tmp/EXPHM/ABAP/DATA/SAPAPPL1_1_1.TOC ??
    Another error is the DbSl Trace: SQL-Error -204 in function db_open
    Is it the NT client that can not connect to the db2/400 DB?
    Have you tried deleting the SQL packages?
    And updating the target kernel lib?
    Including R3load
    What does any OS job log tell you?
    Kind regards,
    Paul Hoogendoorn

  • Which is better Remote Client Copy or Homogenous copy

    Hi All
    I have a task to synchronize the ECC Production server with devlopment server
    For this I have two option :
    1. Remote client copy from Production to Development
    2. Implementing homogenous copy(oracle procedure) of production server and then remove the existing development server.
    I want to know your expert view with which one should I go with, as I have seen many times that whenever I do remote client copy it gives error in test phase the following tables error. so I am not sure wherther I just go with clent copy or not.
    What things should keep in mind before doing it before doing homogenous copy?
    Thankx in Advance
    Regards
    Vinay Paul

    Hi All
    Is there any solution for below if I decide to go with Oracle Procedure of system copy. Because we have to provide this to one of our client as there production and Development server are out of Sink.
    1. Retaining the development history
    2. Retaining the transports history.
    I came to know that the above thing is possible but I have no idea how.
    Thankx in advance
    Regards
    Vinay Paul
    Edited by: Vinay Paul on Jan 16, 2008 1:48 PM

  • BW Homogeneous copy Manual

    Hi,
    Where can I download the homogenous copy guide for BW 3.5/Netweaver04.  We are in Oracle 9i and HP-UX 11i.  I tried searching under service.sap.com/instguides but failed.
    thanks,
    krbas

    Hi,
    You may also see SAPNote 771209 “NW04: Homogeneous and Heterogeneous System Copy (supplementary SAP note)“ for any supplements to the guide.
    Related SAP Notes:
    o 184447 Building a BW-system landscape
    o 121163 BDLS: Converting logical system names
    o 369758 BDLS: New functions and better performance
    o 524554 Storing destinations in the BW environment
    o 325470 Activities after client copy in BW source systems
    538052 Maintenance of Myself destination in BW
    o 305527 Details for correct BW Source System Connection
    o 325525 Copying and renaming systems in a BW environment
    o 184971 Notes on BW source system connections
    o 184754 Procedure after BW database copy; note: procedure in how-to paper is
    different from note: The How-to paper controls!
    o 305527 Details for correct BW Source System Connection
    o 547314 FAQ: System Copy procedure
    o 733623 Oracle export/import for BW system copies
    o 760949 Deallocating extraction due to upgrade or in copied
    o 676084 Heterogene System Kopie BW auf MS SQLServer
    o 518426 ODS object - SYSTEMCOPY, migration
    o 140276 Error in source system assignment
    Regards,
    ®

  • Copy error -36 when copying from Time Machine disk to Mac

    Since using OS X 10.6.(.6), I can't copy certain files from my Time Machine disk to the Mactintosh hard disk without getting a copy error -36. The error doesn't occur with all files: for example pdf files will copy without problems, but Filemaker Pro files and iCal files don't. May be it's important to mention that when I retrieve files from the Time Machine disk, I have to mount the "sparse bundle" with my user files first and then drag the files to the desktop or an other place. This is because I'm running File Vault. If I try to retrieve files that were backed up under OS X 10.5, I get no copying errors at all. So it looks as if Snow Leopard has something to do with it. Is there anybody who has seen this problem before and knows how to solve it?

    Ok, I finally was able to complete the Disk Utility Repair, and it says everything is ok. Still the problem in restoring presists.
    One thing I noticed is that most files that Time Machine restore chokes on have an added set of permissions added to the file or folder with the same user name as mine, and the permissions level says "Custom". Thus it has 2 sets of permissions defined with the same user name, one with Read/Write and another with the same name that says "Custom." Am I explaining this well? Maybe this is a clue?

  • Finder Nonresponsive After Copy Error - Best Plan of Action?

    The following happens on my system frequently. I am running 10.5.8.
    Any help in understanding why this happens, and more importantly, what is the best course of action to take when it does, would be greatly appreciated.
    I ask the Finder, via drag-and-drop, to copy a folder containing tens of gigabytes of data, from one, usually external, hard drive to another, usually external, hard drive.
    The Copy window opens, reports the appropriate amount of data to be transferred, and the blue progress bar proceeds as expected. Partway through the process, the Finder returns a copy error, which states something like (I apologize for the paraphrase, but I do not have the exact message in front of me at the moment.) "The file [specified name of file] contains data that cannot be read or written." I click the "Ok" blue button (the only option provided). The error window disappears, and the Copy window is left, but the copy process does not continue, or at least the window does not indicate that any activity is happening. If I click the grey "x" button in the Copy window to stop the process, nothing happens. Even if I wait several hours after clicking the grey "x" button, nothing happens.
    Trying to drag any of the hard drives connected to the system (whether they are the drives from or to which the data is being copied) results in an error message indicating that the drive is in use and cannot be unmounted.
    Trying to shut down the system via the Apple menu usually results in no apparent activity. Other times, a message will eventually appear indicating that the Finder is preventing shutdown.
    Attempting to relaunch the Finder via Force Quit results in the desktop items disappearing, but the Finder not quitting (the blue light remains below the dock icon). At times, I have been able to use Spotlight to run Terminal to attempt command line shutdown instructions, to no avail, and to attempt command line Finder termination commands, also to no avail.
    The only action that results in a predictable, effective response is holding down the power button until the system shuts off. This, of course, is not ideal in terms of the hard drive data.
    There are no known issues with the files being copied. For example, upon rebooting the system, I can copy the files without generating an error.
    Can anyone provide any insight as to what is happening, how to prevent it from happening, and what to do when it does happen?
    If more information will help, I will gladly try to answer any questions.
    Thank you.
    RDFrelay

    Some additional information: The error message reads as follows: "The Finder cannot complete the operation because some data in "(file name)" cannot be read or written." It also says "Error code -36".
    Using Force Quit to ask the Finder to relaunch results in a blank desktop (everything except the Dock is gone).
    Again, there is nothing wrong with the file that is named in the error.
    Does anyone know what is going on and how to resolve it?
    Thanks.
    RDFrelay

  • Homogeneous Copy  / Converting Distributed System as Central System.

    CURRENT SAP LANDSCAPE.
    SAP Production System is installed as a Distributed System:
    SAP Application Host:_ AIX 5.2 - SAP Application (Central Instance - Central Services) based on NW 7.0 - ERP 2005 SR1.
    Database Host: AIX 5.2 - Oracle 10G ver 10.2.0.2.0. - Database remains in SAN (Storage Area Network)
    ESCENARIO ONE:
    COPYING ONLY CENTRAL INSTANCE AND CENTRAL SERVICES TO A NEW HOST.
    Purpose: I want to copy only SAP Application (Central Instance an Central Services)  to a new host and connect to my current Database Host .
    According System Copy Guide (*) the concept of System Copy includes installation of SAP instances again using copy of source system database,  likewise in this Guide I found the following restrictions:
    Restrictions.
    1.     Copying the database only is not supported!
    2.     Copying the central instance only is not supported!
          The migration controller deletes all dialog instances in the database, so the
          system is not complete any longer.
    3.     Reinstalling the central instance without the database is not supported!
          The migration controller deletes all dialog instances in the database, so the
          system is not complete anylonger
    Questions: 
    1.     Using Homogeneus Copy (Abap+Java) can I copy ONLY SAP Instances (Central Instance and Central Services) to a new host without copying Database ?
    2.     Which is the best procedure to follow for this purpose?
    (*) System Copy for SAP Systems Based on SAP NetWeaver 2004s SR1 ABAP+Java
    Document version: 1.1 ‒ 08/18/2006
    ESCENARIO TWO:
    CONVERTING DISTRIBUTED SYSTEM IN CENTRAL SYSTEM
    Purpose: Convert our SAP Distributed System (two hosts) in SAP Central System (one host)
    Questions: 
    1.     Using Homogeneous Copy (Abap+Java) can I copy SAP Instances (Central Instance, Central Services)  and Oracle Database Instance  to only one host (Central System) ?
    2.     Is there any specific experience or procedure for this special case?
    3. Can I restore Database Full Offline Backup and SAP Application Offline backup  in the new server as an alternative ?
    Thanks.

    Use the distributed system option, as that is what applies to your target system.  It is all explained clearly in the system copy guide, which you should definitely reference as appropriate for your software version:  http://service.sap.com/instguides -> Installation & Upgrade Guides -> SAP NetWeaver -> SAP NetWeaver 7.4 (or version as appropriate) -> Installation -> 2 - Installation - SAP NetWeaver Systems -> System Copy: Systems Based on SAP NetWeaver 7.1 or Higher -> Windows: ABAP (or system variant as appropriate).  In the guide, choose the Database-Specific System Copy:  MS SQL Server-Specific Procedure.  Also, be sure to check out the chapter on Copying the Database Only - Refresh.  Basically, it says to run SWPM on the target database instance, choosing <Product> -> <Database> -> System Copy -> Target System -> <System_Variant> -> Based on AS ABAP (or other as appropriate) -> Database Refresh or Move.

  • What does the "Copy error code files" option do in the build spec properties

    I have the "Copy error code files" checked for my application build specification but when I run my EXE on a different computer and call the simple error handler, I don't get the custom error from my computer's
    C:\Program Files(x86)\National Instruments\LabVIEW 2012\user.lib\errors\User-errors.txt file. Instead I get the "this error code is undefined" explaination.
    I've also tried including that file in the "always included" section of the build spec but that didn't work either. Am I missing something?
    CLD (2014)

    Infinite,
    Check out this link:
    http://www.ni.com/white-paper/3209/en
    Specifically this paragraph:
    "When building an executable (EXE) or shared library (DLL) with the Application Builder, make sure to add the custom error file as a support file (under the Source Files tab). For an executable, the custom error file will be saved in the <executable destination directory>\user.lib\errors directory. For a shared library, the custom error file will be saved in the National Instruments\Shared\LabVIEW Run-Time\<version>\Errors directory. When distributing a shared library, make sure to install the custom error file in this directory."
    James K.
    National Instruments
    Applications Engineer

  • Client copy error:cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc

    Hi Experts,
    While Client copy in Local System , I am facin gthis Error, please anybody help me out.
    client copy error:cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc
    Regards,
    Amit,

    Your Error Message is like => cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc
    This means 'w2k3-web53' is your machine name. and your sap system name is 'ECC'.
    1) If you are on windows then :
        Type '
    w2k3-web53\sapmnt' in address bar, this gives you an error and hence you are getting the above mentioned SAP error.
        Therefore to get out of this error follow the simple steps=>
         I) Create 'sapmnt/trans/log' (recursive) directories anywhere on your machine.
        II) Share 'sapmnt' directory over network {right click on directory->properties->sharing} with full access to others.
       III) Confirm this by typing '
    w2k3-web53\sapmnt' in your address bar. 'CC00000*.ECC' will be created automatically by SAP system  while copying.
    2) If you are using Linux then:
        Create the directories as mentioned above and give full access to directories by using CHMOD command.
        Share 'sapmnt' directory if necessary.
    Note: Change the protection level of your client in SAP if necessary:
    SCC4->EDIT->Double click your client -> then set Protection level at level 0 {No restriction}.

  • LiveCache Homogeneous Copy

    Hello,
    We are doing an homogeneous copy of our productive SCM 5.0 system onto the QA system. I'm kind of stuck with the LiveCache part.
    Our LiveCache Version is 7.6.03.12 on both systems. Our Productive LiveCache is bigger than the QA one. So we have:
    PRD : CACHE_SIZE = 3750000 and 6 volumes of 10Gb each
    QUA : CACHE_SIZE= 750000 and 6 volumes one 1Gb each
    The actual complete dump of our productive LC system is only 600MB. I tried to load it onto the QUA LC system but it won't let me.
    I have checked sap note 457425 but if i try the part 1 of the note that says to recreate the LC instance, when i enter the name of the instance, it tells me that it already exist and doesn't go further.
    If i skip the first part and go directly to the restore part, it does the restore, but i can't restart the instance (the last step of the recovery wizards says : "the database instance is not yet restartable. Choose back to perform another recovery action or choose close to end the recovery wizard".
    If i try to restore a backup of the QA LC system, it works well ...
    What is it i'm doing wrong ? Do both instances have to be configured equally for it to work ?
    Thanks for your help.
    Y.

    Thanks Natalia !!!! that did the trick
    i had to run the command :
    dbmcli -d LC1 -u control,password load_systab -u superdba,password
    and then i was able to start it from LC10.
    Thanks a lot for your help !!!
    Y.

  • Documanage Error #2002 (File Copy Error)

    Hi,
    I am getting this error "Documanage Error #2002 (File Copy Error)" during the Genarc process. I am not able to understand the problem. Can any one please let me know about this error.
    Also is there documentation about documanage errors, please let me know.
    Thanks in Advace

    Turn on your debugging options in Documaker INI and see what you get.
    < DBHandler:DMIA >
    DEBUG = YES
    < DBHandler:ODBC >
    Debug = YES
    Also you may want to turn up your logging in the poffice.ini and check those logs as well. It's been a while since I've seen that but if I recall correctly this error usually happens when you are trying to archive a transaction from Genarc to Documanage and either the connection is broken or the document category doesn't match.

  • Escaping file copy error?

    I was copying a data CD which had a bad file. When I hit the bad file, the message appeared "The Finder cannot complete the operation because some data in "the source file" could not be read or writte. (Error code -36)".
    When I click okay, the Copy message box remains, and clicking the X in that box to stop copying had no effect. I had to restart finder to escape. This is OS 10.5.4 on 2 x 2.66 GHz Dual-Core Intel Xeon Mac Pro. Thanks for any ideas. I couldn't find a bug report location in Apple Support.

    Thanks for the suggestion, but there are no permission errors on the target disk or the system disk. The problem file is on a CD, and there's no way to repair permissions on a CD.
    I think it's an OS bug that the copy dialog box won't cancel on a bad file copy error.

  • Restoring clients after homogeneous copy

    Hi...
    I have a QAS system with three clients (100, 120 and 200).
    I have a PRD system with just the client 100.
    I was asked to perform an homogeneous copy from PRD to QAS, but to make sure clients 120 and 200 are not destroyed.
    My question is:
    Would a client export (SCC8) with profile SAP_RECO solve my problem?
    I would first export both clients (120 and 200) with SAP_RECO, using the QAS system as the target, perform the copy, and then import the clients again through STMS. Would this work? Or is there any other way of doing this?
    thanks
    Antonio

    Hi Antonio
    If your are performing the system copy from PRD to QAS its will be comes only 100 client.
    for this kindly follow the steps
    1. Before starting the system copy Export the QAS client  120 & 200.
    2. Perform the system copy from PRD to QAS, & Post system copy activitys
    3. Create the New clients in QAS system
    4. Do the Import which you already performed
    BR
    SS

  • File copy errors

    Hi,
    We are currently experiencing some failures with copying files (files
    typically over 100mb in size) up to one of our file servers, and we're
    hoping that someone has seen the problem or has some advice.
    The server is an HP Proliant DL360 G5 (with two Broadcom Gigabit NICs)
    running Novell Netware 6.5 with SP8. The typical CPU load is below 20%,
    however packets per second is typically in the 50k-75k packets per
    second range during the day.
    On Windows XP with Novell Client 4.91 SP5, we receive: "Cannot copy
    <filename>: The specified network name is no longer available."
    On Windows 7 with Novell Client 2 SP1 (IR8), we receive "Can't read from
    the source file or disk."
    The symptoms are more typical when the traffic is higher on the server
    and in areas with faster switch hardware. There is no consistency with
    when (during the copy) we see the error and there seems to be no affect
    on the server itself. Even though we have not seen errors on the
    monitor's NIC stats, we have tried moving from one server NIC to the
    other to see if it is somehow related to a NIC. The errors are
    repeatable on both the server's internal drives as well as the connected
    SAN drives.
    In addition, we have another server with almost the same configuration
    (same hardware, SAN connection, OS version and patch level) that is not
    having this problem at all. The main difference is that the load on
    this 2nd server is very small compared to the server where we see the
    copy errors.
    Any info is greatly appreciated.
    Thanks.
    ,Matt

    Hello,
    please check the driver's version of the broadcom nics (BX2.LAN).The
    were some versons causing issues (3.70, 4.41, 4.42) in the past look
    whether version 5.01 is loaded on the server and check whether you team
    the nics with broadcom teaming software or the netware built-in. MAybe
    you should also check the ports of the network switch for connection
    options (Speed/Duplex settings being auto/auto or 1G/full). Also the
    firmware of the server (BIOS, NICs etc.) should be checked, you can find
    updates on the website of HP:
    http://h20000.www2.hp.com/bizsupport...&swEnvOID=1064
    Regards and good luck
    Burkhard Wiegand
    Netware Admin
    Debeka-Versicherungen
    D-56068 Koblenz

  • Homogeneous copy

    Hi,
    I am doing a database migration from the existing Production to a new server with same OS,DB and SAP ERP version. The new server type is also same with more memoryand HDD resources. The OS is windows 2003 server, DB Oracle 10.2 G and ERP version is ECC 6.0. I am planning for an homogenous copy using sapinst. My plan is to export the database using sapinst from the current production server and import to the nerserver using sapinst.  Pls clarify the following points before doing the the export/ import and help me to do this activity with out much issues.
    1. What are prerequistes to be carried out before doing this activity.
    2. While importing whether we have to create the central instance creation before importing the database.
    3. What are post installation activities.
    4. Is there any other better  method to carry out the server migration.
    Regards
    dineshsk

    Which attachment?
    The link is working - I can download that guide nicely.
    Try here:
    System Copy and Migration
    Markus

Maybe you are looking for